General Information
Project Type
Structure: |
Box girder bridge |
---|---|
Function / usage: |
Road bridge |
Material: |
Prestressed concrete bridge |
Structure: |
Haunched girder bridge |
Support conditions: |
for registered users |
Construction method: |
for registered users |
Plan view: |
Structurae Plus/Pro - Subscribe Now! |
Material: |
Structurae Plus/Pro - Subscribe Now! |
Location
Location: |
Daytona Beach, Volusia County, Florida, USA |
---|---|
Coordinates: | 29° 12' 58.15" N 81° 0' 55.66" W |
Technical Information
Dimensions
total length | 916.84 m | |
number of lanes | 2 x 2 | |
main bridge | ||
---|---|---|
main span | 31.6992 m | |
total length | 541.6296 m | |
deck | deck depth | 2.1336 - 3.9624 m |
Materials
deck |
precast prestressed concrete
|
---|---|
piers |
reinforced concrete
|
abutments |
reinforced concrete
|
Excerpt from Wikipedia
The Broadway Bridge is a segmental bridge that spans the Halifax River and Intracoastal Waterway in downtown Daytona Beach, Florida, carrying U.S. Route 92.
The Broadway Bridge reaches a height of 65 feet (19.9 m) and is 3,008 feet (917 m) in length. The bridge is more famous for its flair than its purpose. Mosaics of manatees, dolphins and other wildlife native to Florida give the bridge some tourist appeal.
The bridge was dedicated on July 20, 2001.
History
First bridge
Plans for the original Broadway Bridge were approved by the U.S. Army Corps of Engineers on May 4, 1912. Michael Sholtz (father of future Governor David Sholtz), President of Central of Florida Railway Company, petitioned the Corps for the new bridge which he planned to use for his company's electric streetcar system, that would connect the cities of Daytona, Daytona Beach, and Seabreeze (separate cities at the time, before consolidating in 1926) across the Halifax River.
The bridge was simply referred to as the concrete bridge for many years, until it started to be called the Broadway Bridge. It likely picked up the name because it connected to Broadway Avenue (now named International Speedway Blvd.) on the beach side.
Second bridge
By 1947, the Broadway Bridge was carrying traffic for a spur of State Road A1A and State Road 600. The State Road Department determined a new four-lane drawbridge was needed to replace the old structure. Tidewater Construction Corporation of Norfolk, Virginia, was awarded the contract to construct the bridge, and started work on February 6, 1947. The overall length was 1777 feet with a channel span of 104 feet, allowing 90-foot clearance with the double-leaf bascule (drawbridge) open.
The second Broadway Bridge over the Halifax River was officially opened on November 8, 1948, and dedicated in honor of Robert T. Carleton, Road Department member of the Fifth District, and Elmer Blank, Volusia County Commissioner. Although the name "Carleton-Blank Bridge" appeared on state maps, the local community continued to refer to the structure as the Broadway Bridge.
Third Bridge
The State Road Department reported that the 1948 lift bridge occurred several problems, and it could be better to build a bigger bridge for sail boats to go under better. Construction on the new bridge started on March 4, 2000. On October 21, a crane fell from the bridges.
The new bridge opened on July 20, 2001, replacing the 1948 bridge.
Text imported from Wikipedia article "Broadway Bridge (Daytona Beach)" and modified on August 23, 2021 according to the CC-BY-SA 4.0 International license.
Participants
Relevant Web Sites
- About this
data sheet - Structure-ID
20004071 - Published on:
02/07/2002 - Last updated on:
23/08/2021