Structures - October 2024

Published:	October 2024

Articles in this Issue

Author(s)	Title	Page(s)
Zheng, Yichuan / Dong, Zhiqiang / Liu, Ziqing / Wu, Gang / Zhu, Hong / Wei, Yang	An activation guideline for the resistive heating process of iron-based shape memory alloy embedded in concrete	107079
Arokiaprakash, A. / Selvan, S. Senthil / Anandh, K. S. / Adamu, Musa / Ibrahim, Yasser E.	Advancements in light-gauge steel rectangular CFST columns: A comprehensive experimental study	107231
Belliazzi, Stefano / Fabbrocino, Francesco / Lignola, Gian Piero / Prota, Andrea	Advantages of using DIC for capturing mechanical shear sliding behaviour of the FRCM strengthened masonry	107056
Zhang, Jiajun / Liu, Yanhui / Xue, Songtao	Analysis and experimental evaluation of an inertial eddy current damper for vibration control	107052
Cao, Ziying / Luo, Ani / Liu, Heping / Feng, Yaming	Analysis of shape-change capabilities for the two-stage tensegrity tower	107110
Russo, Martina / Cocco, Pio Lorenzo / Giannetti, Ilaria	Analysis of the form, construction, and structural conception of Silberkuhl shells through construction history and advanced HBIM	107118
Tran, Le-Hung / Duong, Tuan-Manh / Hoang, Tien / Foret, Gilles / Duhamel, Denis	An analytical model to calculate the forced vertical vibrations of two rails subjected to the dynamic loads of ballasted railway track	107203
Fu, Yanbin / Zhu, Junzhou / Li, Xiaoping / Yelv, Gendi / Zhang, Yanlong	Analytical solutions and its verification on compression-bending-shear mechanical characteristics of circular ring structure using 3D printing	107177
Kazemi, Ramin / Emamian, Seyed Ali / Arashpour, Mehrdad	Assessing the compressive strength of eco-friendly concrete made with rice husk ash: A hybrid artificial intelligence-aided technique	107050
Naqash, Muhammad Tayyab / Formisano, Antonio	Assessment of cantilevered curtain wall system supported by tension rods for an enclosed circular building	107133
Khatti, Jitendra / Yılmazer Polat, Berivan	Assessment of short and long-term pozzolanic activity of natural pozzolans using machine learning approaches	107159
Mohana, R. / Bharathi, S. M. Leela	Assessment on the mesh and mortar effect of the impact resistant nano fly ash based geopolymer ferrocement panels using rubber and plastic aggregates	107147
Guo, Wei / Liang, Guangyue / Ren, Shaoxun / Zeng, Chen	Automatic crack detection method for high-speed railway box girder based on deep learning techniques and inspection robot	107116
Cai, Heng / Zeng, Yanqin / Xu, Lihua / Liu, Jungang	Axial behavior of ultra-high performance steel fiber reinforced concrete filled circular steel tubular columns	107186
Zhao, Di / Zhang, Jigang / Liu, Feifei / Gu, Chi / Zhao, Guoliang / Song, Hanyu / Qiu, Huanliang / Zhang, Pengfei / Zhong, Yutao	The axial compression performance of stainless steel tube-confined concrete with a circular hollow section: Experimental results	106909
Ren, Zhigang / Wang, Dian / Kondo, Gen	Axial compressive capacity prediction and optimal design of circular UHPC-filled steel tube based on Hybrid Symbolic Regression - Neural Network model	107084
Thai, Huu-Tai	Beam-to-CFST column joints in steel-concrete composite buildings: A comprehensive review	107123
Zhang, Zhexun / Xu, Shanhua	Bearing capacity of corroded C-section cold-formed thin-walled steel beams under distortional buckling	107038
Wang, Weiwei / Lyu, Xuetao / Liu, Xin / Zheng, Jun / Gao, Han / Yu, Yang	Behavior of cross-shaped stiffened concrete-filled steel tubular stub columns after fire exposure	107266
Nalon, Gustavo Henrique / Ribeiro, José Carlos Lopes / Pedroti, Leonardo Gonçalves / Silva, Roberto Marcio da / Araújo, Eduardo Nery Duarte de	Behavior of self-sensing masonry structures exposed to high temperatures and rehydration	107083
Zhang, Yirui / Wei, Yang / Jin, Haopeng / Yi, Jiyang / Liu, Lin / Li, Sheng	Behavior of underwater concrete columns confined by non-dispersive mortar and stainless steel tube subjected to core axial compression	107193
Saumiyaa, K. S. / Anbarasu, M. / Sonkar, Chanchal	Behaviour and design of cold-formed ultra-high-strength steel hollow section column members	107122
Peng, L. X. / Sun, J. K. / Tao, Y. P. / Huang, Z. M.	Bending analysis of thin plates with variable stiﬀness resting on elastic foundation via a two-network strategy physics-informed neural network method	107051
Zhao, Chuan-Hao / Pan, Wen-Hao / Wang, C. M. / Luo, Yao-Zhi	Bracing systems for three-ribbed arch bridges against out-of-plane buckling	107169
Sacco, Giulio Lucio Sergio / Battini, Carlo / Calderini, Chiara	A case study of preliminary damage detection of two heritage vaults trough geometric deformation analysis on 3D point clouds	107175
Arslan, O. / Messali, F. / Smyrou, E. / Bal, I. E. / Rots, J. G.	Characterisation of timber joists-masonry connections in double-leaf cavity walls – Part 1: Experimental results	107164
Arslan, O. / Messali, F. / Smyrou, E. / Bal, I. E. / Rots, J. G.	Characterisation of timber joists-masonry connections in double-leaf cavity walls – Part 2: Mechanical model	107165
Kizhakkum Paramban, Rusna / Varatharajapuram Govindarajulu, Kalpana	Characteristic study of geopolymer fly ash fine aggregate and its influence on partial replacement of M-sand in the strength properties of mortar	107141
Dragan, Dan / Das, Rajarshi / Bogdan, Teodora / Degée, Hervé	Characterization of different longitudinal shear transfer mechanisms for profiles embedded in concrete walls	107044
Bajad, Ketan Narayan / Jangid, Radhey Shyam	Clutching inertial system for base-isolated liquid storage tanks: Seismic performance and optimal parameters	107042
Tahiri, Mohamed / Khamlichi, Abdellatif / Dkiouak, Rachid / Bezzazi, Mohammed	Combined effect of track-bridge interaction on the dynamic response of a simply supported railway bridge	107071
Sarıdemir, Mustafa / Çelikten, Serhat / Bulut, Metehan / Deniz, Suvat	Comparative analysis of long-term and high temperature performances of OPC based high strength mortar and silica fume based high strength geopolymer mortars	107080
Liu, Zhichen / Qu, Yiqun / Song, Yinglong / Wang, Jialing / Hu, Shijun / Li, Chunzhe / Zhang, Zuhua	Comparative analysis of the seismic performance of ECC jacket reinforced columns with different cross-sectional forms subject to different load modes	107064
Bolina, Fabrício Longhi / München, Rafael M. / Dal Lago, Bruno / Kodur, Venkatesh	A comparative study between ultra-high-performance concrete structures and normal strength concrete structures exposed to fire	107197
Wang, Lanzhuo / Gong, Guobin / Xia, Jun	Comparison of evaluations of human-induced floor vibration based on different design guidelines	107114
Ebrahimi, Sahar / Naderpour, Hosein / Zahrai, Seyed Mehdi	Comprehensive evaluation of seismic fragility in base isolated buildings enhanced with supplemental dampers considering pounding phenomenon	107077
Shilar, Fatheali A. / Ganachari, Sharanabasava V. / Patil, Veerabhadragouda B.	A comprehensive review on the strength, durability, and microstructural analysis of bacterial concrete	107078
Du, Er-Feng / Hu, Xiao-Bo / Li, Qian / Tang, Yi-Qun / Lyu, Xiao	Compression behavior of truss-reinforced double steel plate-recycled aggregate concrete composite low wall: A numerical investigation	107120
Li, Peng / Fan, Liang / Shen, Wei / Wang, Fei	Corrosion protection performance of stretched graphene-modified cold-sprayed zinc coating for steel rebar	107173
Boutillier, Romane / Douthe, Cyril / Hauswirth, Laurent / Baverel, Olivier	Coupling grid topology generation and form-finding for the design of architectural meshes	107119
Jiang, Liqiang / Liu, Juntao / Wen, Tianxing / Jiang, Lizhong / Yan, Yingqi / He, Chang	Damage dispersion study of high-speed railway track-bridge system with the UCSD considering train effects	107213
Chen, Liang / Zhang, Kefa / Yan, Jing	Data-driven study on shear bearing capacity of segmental concrete joints	107145
Beyene, Daniel Asefa / Tola, Kassahun Demissie / Yigzew, Fitsum Emagnenehe / Park, Minsoo / Park, Seunghee	DCNAM: Automatic detection of pixel level fine crack using a densely connected network with attention mechanism	107073
Manguri, Ahmed / Saeed, Najmadeen / Jankowski, Robert	Deformation mitigation and twisting moment control in space frames	107227
Zhang, Yiqun / Zhang, Jiacheng / Zhang, Ruixiang / Liu, Shunchang / Cai, Jianguo / Li, Meng / Li, Bin	Design of deployable mesh reflector antenna based on cable-dome tensegrity structure	107150
Hu, Chao / Wang, Yuhang / Cheng, Rui / Luo, Jun / Gong, Meilan	Design of improved multi-cell L-shaped CFST columns under compression and bending	107194
Hao, Meijing / Chang, Wei / Zheng, Wenzhong	Design-oriented method for the load-bearing capacity of RC columns jacketed by octagonal and spiral stirrups under axial and eccentric compression	107113
Wang, Shen / Zhang, Chaoqi / Yao, Di	Developing novel nuclear containment structures: Current status and future prospects	107161
Ou, Tong / Zhu, Wanxu / Lan, Chunguang / Bai, Baoping / Bai, Shi / Qiu, Youwei / Liu, Rong / Shen, Quanxi	Development and engineering application of fiber bragg grating intelligent cable in large-span hyperbolic parabolic spatial cable network	107196
Lian, Jun-Yi / Zhang, Wen-Yuan / Ding, Yu-Kun	Development of an innovative FlexLock Connector for prefabricated prefinished volumetric construction	107060
Wang, Shaowei / Gu, Chongshi / Liu, Yi / Gu, Hao / Xu, Bo / Wu, Bangbin	Displacement observation data-based structural health monitoring of concrete dams: A state-of-art review	107072
Yan, Qiushi / Gao, Chunkai / Ren, Pengcheng	Dynamic mechanical properties and uni-axial constitutive model of S30408 stainless steel	107143
Wang, Xu / Kong, Hu / Wang, Keqin / Chen, Qi	Dynamic stress monitoring for RC beam using PMN-PT-based three-direction normal stress sensor	107091
Wang, Fei / Cai, Yichang / Ma, Zhiqun / Xu, Aimin / Zhang, Huan / Ji, Chunhua / Ren, Sensen	Effect of aspect ratio and geometric defects on the stability performance of U-rib stiffened plates	107082
Xiao, Zhicheng / Li, Ren / Li, Huijun / Yan, Gengwang / Fan, Ruiyang / Jiang, Shoufang	Effect of joint behaviors on the load-carrying capacity of single-layer reticulated dome	107124
Araz, Onur	Effect of PGV/PGA ratio on seismic-induced vibrations of structures equipped with parallel tuned mass dampers considering SSI	107188
Wang, Zitong / Chen, Wensu / Huang, Zhijie / Hao, Hong	Effects of structural configuration on perforation/spalling damage and secondary fragment velocity of reinforced concrete slabs subjected to close-in explosion	107101
Manigandan, R.	Effects of thin-walled inner steel tubes on the compressive behavior of concrete filled double skinned steel tubular columns	107032
Lee, Seungjun / Lee, Jaebeom / Yoon, Sungsik / Lee, Young-Joo	Efficient finite element reliability analysis employing sequentially-updated surrogate model for fragility curve derivation	107246
Wu, Chenglong / Fan, Mingchi / Song, Haitao / Mou, Ben / Wang, Xiujun / Yu, Sujian / Liu, Caiwei / Men, Jinjie	Elastic-plastic analysis of a novel prefabricated SRC column-steel beam composite frame structure	107208
Hou, Ning / Zhong, Huaqiang / Sun, Limin / Chen, Lin	Enhancing acceleration data cleaning through time–frequency feature integration using deep learning	107048
Tran-Ngoc, Hoa / Nguyen-Huu, Quyet / Nguyen-Chi, Thanh / Bui-Tien, Thanh	Enhancing damage detection in truss bridges through structural stiffness reduction using 1DCNN, BiLSTM, and data augmentation techniques	107035
Dong, Hanlin / Tao, Jingyan / Wang, Xijun / Luo, Jing	Enhancing seismic resilience in hybrid steel frame – Light wood shear wall structures with slotted-bolted dampers: Design parameters and performance evaluation using “DowelType” hysteretic model	107229
Al-Sadoon, Zaid A. / Saatcioglu, Murat / Palermo, Dan	Enhancing seismic resilience of non-ductile RC frames with a novel buckling restrained brace system: A nonlinear analysis approach	107089
Chen, Xiang / Lin, Zhi / Feng, Wan-Lin / Yang, Hong-Yun / Xiang, Yi-Heng	Evolution of structural safety for tunnel arch crown linings under the coupled influence of void and insufficient thickness	107125
Omar, Ali H. / Gullu, M. Fethi / Ahmed, Ghafur H.	Experimental and analytical investigation of T-beams retrofitted through the external post-tensioning using steel and various FRP strands	107129
Cao, Jincheng / Wu, Fangwen / Zhao, Bitong / Lei, Haipeng / Li, Zirun / Chen, Ao	Experimental and analytical investigations for the bond slip and anchorage design between BFRP bar and engineered cementitious composites	107075
Nouri, Younes / Jouneghani, Habib Ghasemi / Haghollahi, Abbas / Hemati, Ehsan / Hemati, Seayf Allah / Mortazavi, Mina	Experimental and numerical investigation of a steel yielding arc and ring damper	107140
Zhao, Xiaohua / Xing, Yingjian / Jia, Yongsheng / Fang, Hongyuan / Sun, Jinshan / Yao, Yingkang / Zhao, Haonan / Wei, Dong	Experimental and numerical investigation of arch concrete slabs subjected to underwater contact explosions with the inner arch side facing air	107240
Liu, Caiwei / Yang, Meng / Wang, Pengfei / Li, Kang / Gao, Xuyang / Zeng, Zaiping	Experimental and numerical study on post-fire flexural capacity of corroded reinforced concrete beams under various cooling methods	107256
Zhao, Jun / Zhao, Yi / Shen, Fuqiang / Li, Xiaopeng / Yin, Lu	Experimental and numerical study on seismic behavior of high energy-consuming resilient concrete shear walls reinforced by CFRP bars and magnetorheological dampers	107210
Ma, Zhehao / Chen, Degang / Zhang, Jigang / Yang, Guangchao / Wang, Sheng / Sun, Xiaoli / Xu, Weixiao / Wang, Xiangying	Experimental research on seismic performance of prefabricated monolithic wall connection of modular concrete structure	107202
Li, Wei / Fan, Haitao / He, Song / Lin, Xuchuan / Chen, Lianmeng / Lv, Hui	Experimental studies on fully demountable P-DBSCs shear connectors in sustainable reinforced concrete beam-slab	107134
Wang, Yuke / Zhou, Sensen / Li, Zhenyu / Li, Dongbiao / Yang, Pengyu / Chen, Yuyuan	Experimental studies on the interfacial shear characteristics between joint concrete and foamed polymer in cross-river shield tunnel	107241
Zhang, Man / Zhang, Jianwei / Li, Jianlin / Dong, Hongying	Experimental study and model analysis on the seismic and resilient performance of RAC precast walls with UHSB	107128
Cheng, Bei / Huang, Ziqi / Feng, Ran / Cai, Yuan / Chen, Fangyang	Experimental study of the out-of-plane mechanical properties of tall foam ceramic (FC) partition wall	107074
Yue, Jianwei / Han, Pu / Zhao, Limin / Wang, Zifa	Experimental study on controlling basement leakage for urban flooding mitigation	106751
He, Zongyuan / Deng, Zhiheng / Hu, Shaowei / Liang, Xiaoqin	Experimental study on eccentric compression of the prefabricated columns with a new type of column-column connection node	107239
Li, Hai / Lu, Zhao-Hui / Li, Chun-Qing / Tang, Zhuo	Experimental study on flexural behavior of corroded post-tensioned T- shaped beam	107117
Islam, Shahid Ul / Waseem, Shakeel Ahmad	An experimental study on mechanical and fracture characteristics of hybrid fibre reinforced concrete	107053
Xiong, Ergang / Xie, Yupeng / Wang, Wenxiang / Mei, Zhongxing / Cao, Tao / Taciroglu, Ertugrul	Experimental study on seismic performance of a new precast segmental assembled single column bridge pier	107085
Zhang, S. S. / Zhang, D. D. / Nie, X. F. / Ye, J. P.	Experimental study on T-shaped reinforced concrete beams with locally reduced cross-sections	107180
Serror, Mohammed H. / Sedkey, Mohamed A. / Osman, Hussein S.	Experimental study on the fatigue behavior of CFRP-strengthened cracked steel plates under eccentric axial tension	107182
Aizaz, Mohammad / Shahzada, Khan / Gul, Akhtar / Saqib, Muhammad	Experimental study on the in-plane behavior of mud brick walls strengthened with bamboo strip mesh and dried jute thread	107238
Chen, Rui-Sheng / Zhang, Hao-Yu / Hao, Xin-Kai / Yu, Han-Xi / Shi, Tao / Zhou, Hang-Sheng / Wang, Rong-Bing / Zhao, Zhi-Fang / Wang, Pengjie	Experimental study on ultimate bearing capacity of short thin-walled steel tubes reinforced with high-ductility concrete	107109
Di Sarno, Luigi / Albuhairi, Danah / Medeiros, João Miguel Peres	Exploring innovative resilient and sustainable bio-materials for structural applications: Hemp-fibre concrete	107096
Agüero-Barrantes, Pablo / Lobo-Aguilar, Sergio / Hain, Alexandra / Christenson, Richard E.	Exploring Kriging metamodeling to alleviate speed reading dependence in Bridge Weigh-In-Motion predictions	107086
Zou, Junling / Deng, Qingtian / Song, Xueli / Li, Xinbo / Chen, Li	Failure modes of laminated porous panel with different connection methods	107245
Liu, Jie / Wei, Yang / Zhao, Qi / Zhang, Yirui / Zheng, Kaiqi	Fatigue-induced fracture assessment for FRP-steel bonding joints after seawater exposure	107209
Gašpárek, Jakub / Paulík, Peter / Kopásek, Denis	Findings from in-situ survey of post-tensioned precast and segmental post-tensioned bridges	107190
Qi, Ligang / Bai, Jie / Wu, Hangzi / Xu, Guowen / Xiong, Hao / Yang, Yan	The first engineering application of 10MN CFRP cables in cable-stayed bridge in China	107199
Zhang, Liangyi / Zhou, Tiegang / Lu, Junhai / Tan, Wei / Liang, Zengfei	Flexural capacity and failure trend of fiber and steel reinforcement reinforced cement stabilized rammed earth beams	107170
Tao, Tianyou / Wang, Hao / Wen, Xuehua / Fenerci, Aksel	Flutter analysis of a long-span triple-tower suspension bridge under typhoon winds with non-uniform spanwise profile	107156
Fu, Jiahui / Wang, Wei / Wang, Xu / Zhao, Wuchao / Zhou, Rongxin / Lu, Zhitang	Fragility assessment of RC bridge piers subjected to vehicle collision based on residual load-bearing capacity	107103
Sorace, Stefano / Bidoli, Nicola / Terenzi, Gloria	Glazed-level dissipative brace incorporation in a gym building	107184
Zhao, Jinyou / Li, Jin / McDermott, Paddy / Wang, Jie / Chen, Xi / Sun, Yao	Global stability of mono-symmetric I-section high-strength steel beams	107230
Lei, Haipeng / Liu, Zhao	Graphical poly-arch model for the ultimate limit state verification of RC deep beams under hanging loads	107163
Vahid-Vahdattalab, Farzin / Ghandi, Elham	HSC-RSW with laterally installed XADAS dampers: Seismic performance	107093
Lu, Linfeng / Zhu, Pengfei / Ding, Songlin / Ma, Zhongyi / Li, Rui / Nie, Shaofeng / Wang, Wei / Raftery, Gary M.	Impact of anti-corrosion coatings and maintenance on high-strength bolt friction connections in C4 marine environment	107098
Gan, Lu / Zong, Zhouhong / Li, Minghong / Qian, HaiMin / Lin, Jin	Impact of prototype scale effect on the dynamic responses and damage of steel plates under explosions	107206
Zhao, Weiyi / Zhu, Zhongxing / Wei, Linqiang / Wang, Lin	Impact response of steel plate-concrete composite slabs with kinked rebar connectors	107121
Cavuslu, Murat / Ulger, Tuna	Impacts of the mechanical connectors on seismic performance of the restored masonry Plaka Bridge using experimental and numerical studies	107058
Zhang, Yuming / Ma, Juan	An improved sequential importance sampling method for structural reliability analysis of high dimensional problems	107222
Moslehi Tabar, Afshin	Improvement to dynamic condensation of structural systems using an innovative virtual model reduction	107136
Wei, Chenyang / Liu, Changyong / Hu, Qing / Wang, Daiyu / Wang, Yuyin	In-plane behaviors of FRP confined concrete-filled steel tubular arches under mid-span concentrated loads	107151
Tan, Hao / Wei, Biao / Wang, Weihao / Xiao, Binqi / Li, Shanshan / Jiang, Lizhong	Influence of pier height and ground motion parameters on seismic response and energy dissipation of isolated railway bridges	107236
Gallet, Adrien / Liew, Andrew / Hajirasouliha, Iman / Smyl, Danny	Influence zones of continuous beam systems	107069
Cheng, Yu / Cao, Liang / Liu, Jiepeng / Wang, Yuhang / Zhou, Xuhong	Intelligent analysis of dynamic characteristics of steel-concrete hybrid wind turbine tower based on adaptive vibration mode	107235
Khosravi Larijani, Arman / Tehrani, Payam	Investigating the effect of earthquake incident angle on seismic response and fragility analysis of irregular RC buildings with nonparallel systems	107135
Wang, Juke / Li, Xiaojun / Liu, Aiwen / Chen, Su / Fu, Lei / Liu, Haoran / Li, Fangfang	Investigation on the nonlinear interaction between electro-hydraulic shaking table array and test structure	107189
Sun, Bin / Du, Shilin	Kernel extreme learning machine and finite element method fusion fire damage prediction of concrete structures	107172
Araghi, Mehran / Nayebi, Ali / Rokhgireh, Hojjatollah	Laser powder bed fusion manufactured TPMS cellular structures: Failure modeling by using initial damage concept and continuum damage mechanics model	107272
Rezaee, Mohammad / Asghari, Abazar	Lateral-torsional buckling investigation of multi-tiers eccentrically braced frames with shear link beam	107063
Chen, Yaojia / Jiao, Yubo / Chen, Hua	Low-carbon repair of RC columns using sandwiched RAC and FRP-steel composite tube: Axial compression tests and design	107181
Tang, Pengfei / Dai, Yecheng / Lu, Changheng / Hu, Shaowei	A machine learning framework for predicting the axial capacity of cold-formed steel face-to-face built-up channel sections at elevated temperatures	107144
Mamedipaka, Ramesh / Hemachandra, M. / Mishra, Akshansh / Sinhmar, Sunil / Thapliyal, Shivraman	Machine learning-assisted wire arc additive manufacturing and heat input effect on mechanical and corrosion behaviour of 316 L stainless steels	107126
Lai, Bing-Lin / Bao, Rui-Long / Zheng, Xiao-Feng / Vasdravellis, George / Mensinger, Martin	Machine-learning assisted analysis on the seismic performance of steel reinforced concrete composite columns	107065
Shaji, Aishwarya / Prasad, A. Meher / Menon, Devdas	Macro-modelling of GFRG infilled RC frames incorporating pivot hysteretic model	107059
Yan, Xu / Shi, Huahong / Li, Bing / Liu, Kaitao	Mechanical properties of steel-framed fibreglass panel formwork systems	107204
Chen, Shoukai / Wang, Yajun / Liu, Yang / Zhao, Mengdie	Mechanical properties, pore structure and freeze-thaw resistance of recycled aggregate concrete based on ash of mushroom and corn straw	107167
Xie, Faxiang / Chang, Tianliang / Zhang, Chuanlong / Zhang, Feng / Kuang, Geni / Zhang, Yun	Medium and short_term effective prestress losses considering multiple factors: Laboratory and on-site beam experiments	107166
Cruz-Vargas, J. G. / Gómez- Soberón, M. C. / De León-Escobedo, D. / Rojas-Serna, C.	Methodology to determine the embedment depth of bridge piers considering the duration of rainfall events	107081
Badoniya, Pushkal / Srivastava, Manu / Jain, Prashant K. / Kumar, Abhay	Microstructural refinement and strengthening of wire arc additively manufactured construction grade low carbon steel through heat treatment	107153
He, Zhongying / Li, Haoyang / Li, Yi / Xu, Wen / Song, Yifan / Pang, Yutao	Mode selection and combination rules of energy-based multimodal pushover method for simply supported beam bridges	107092
Singh, Harmandeep / Bhardwaj, Gagandeep / Grover, Neeraj	Modeling and static analysis of porous functionally graded and FG-sandwich plates	107034
Lu, JinYu / Zou, Jun / Wang, Shuting	Morphological analysis of a novel scissor-type deployable cable dome structure	107160
Chen, QingJun / Li, Yunlong / Liu, Xinpei / Gao, Wei / Wang, Yingtao / Yao, Miaojin / He, Zhanchao / Cai, Jian	Multiple impact tests on precast reinforced concrete beams with pressed sleeve connections	107268
Trad, Maryam / Bitar, Ibrahim / Grange, Stephane / Richard, Benjamin	A multiscale steel–concrete interface model for structural applications	107137
Alfouneh, Mahmoud / Ben Seghier, Mohamed El Amine / Keshtegar, Behrooz / Tabatabaie Shojah, Syed Abolfazl	A new formulation for predicting the ultimate capacities of FRP-confined concrete using advanced machine learning framework: Developed structural reliability analysis	107158
Li, Wenshan / Liu, Zhao / Wu, Suiwen	A non-smooth dynamic model for pounding analysis of simple span bridges under seismic excitations	107187
Tang Bui, Huy / Tan, Kang Hai	Non-uniform distribution model of rust layer around steel bar circumference and its effect on corrosion-induced concrete cracking	107132
Ghadimi, Siamak / Zamani-Ahari, Gholamreza / Kourehli, Seyed Sina	A novel approach to crack modeling using extended finite element and substructures methods	107219
Xu, Mingyang / Zhou, Yang / Pang, Rui / Xu, Bin / Zhang, Yu	A novel finite element limit equilibrium method and its application in instability analysis for 3-D high core rockfill dams	107066
Aghakouchaki Hosseini, Seyed Ehsan / Beskhyroun, Sherif	Numerical investigations of seismic-resilient techniques for legged fluid storage tanks utilising magnetorheological dampers	107090
Athmarajah, Gopikrishna / Mahendran, Mahen	Numerical modelling and design of cold-formed steel batten screw connections subject to pull-out failures at sub-zero temperatures	107155
Mishra, Biraja Prasad / Barik, Manoranjan	NURBS-Augmented Finite Element Method for the stiffened plates under bending	107111
Rashid, Khuram / Raoof, Muhammad Naeem / Daud, Maheen / Wang, Yi / Ju, Minkwan	One-part alkali activated binder activated by sodium metasilicate and ternary-factored sustainability of structural block	107108
Zhou, Zijie / Xie, Zhuangning / Zhang, Lanfang / Zhang, Lele	Optimal design of multiple tuned liquid dampers with paddles for wind-induced vibration control of high-rise buildings	107094
Feghali, Paulo / Krahl, Pablo / de Andrade Silva, Flávio	Optimization of UHPC beams under flexural loading: A numerical and experimental investigation	107115
Shi, Feng-Wei / Tao, Rui-Zhao / Dong, Shuo / Li, Peng / Wang, Lai / Chen, Hai-Tao	Performance of profile steel CFDSP composite walls under compression and bending loads	107061
Xiong, Yulin / Lu, Hongjia / Xie, Yi Min	Perturbation approaches to achieving diverse and competitive designs in topology optimisation	107183
Sciomenta, Martina / Fanti, Riccardo / Doudak, Ghasan / Polastri, Andrea / Casagrande, Daniele	Predicting the non-linear behaviour of cross laminated timber shearwalls with cut-out openings	107138
Li, Bin / Wang, Xiangyang / Di, Danyang / Yu, Wei / Fang, Hongyuan / Du, Xueming / Wang, Niannian / Zhang, Tilang / Zhai, Kejie	Prediction model of maximum stress for concrete pipes based on XGBoost-PSO algorithm	107205
Zafarani, Nematullah / Sharifi, Hojjat / Sharifi, Yasser	Prediction of shear capacity of slender SFRC beams without stirrup through combination of particle swarm optimization and neural network	107250
Zhang, Yixin / Wang, Dahai / Sun, Chao / Fu, Xing	Probabilistic study on non-stationary extreme response of transmission tower under moving downburst impact	107179
Alsaif, Abdulaziz / Albidah, Abdulrahman	Production of rubberized concrete utilizing reclaimed asphalt pavement aggregates and recycled tire steel fibers	107174
Li, Zequn / Zhu, Yan Fei / Zhang, Huiyun / Liu, Yufei / Yao, Yao	Progressive collapse resistance of self-resilient composite frames under fire conditions	107127
Mascolo, Ida / Guarracino, Federico / Sarfarazi, Sina / Della Corte, Gaetano	A proposal for a simple characterization of stainless steel connections through an equivalent yield strength	107043
Silva, Guilherme dos Santos / de Oliveira, Silvio Cesar / Jardim, Pedro Ignácio Lima Gadêlha / Reis, Elvys Dias / Aquino, Vinicius Borges de Moura / Christoforo, André Luís	Proposed correction to the Gamma method for estimating the bending stiffness of CLT panels	107214
Gong, Weikang / Yang, Guotao	Pull-out strength of thin perfobond connectors and C-ties in steel-concrete-steel sandwich composite structures	107152
Gao, Hongshuai / Lei, Xinji / Sun, Yue / Liu, Lei / Liu, Hongbo	Radial compression performance of glass fiber reinforced polyurethane composite tube with open-hole	107215
Li, Ruiran / Yu, Jun / Zhou, Xingde	A rapid damage assessment framework for regular RC frame structures under external explosions	107104
Zhong, Ziqin / Zhao, Shixing / Xia, Jing / Luo, Qirui / Zhou, Qiaoling / Yang, Shuheng / He, Fei / Yao, Yu	Regression prediction model for shear strength of cold joint in concrete	107168
Ghaffari, A. H. / Hadidi, A. / Ghaffarzadeh, H.	Reliability-based robust control strategy via LMI approach for TMDs and ATMDs with uncertain parameters	107226
Liu, Pengtao / Wang, Xiaopeng / Wang, Yongquan / Sun, Jie / Li, Xiang	Research on the distorted similitude of bolt-connected coupled cylindrical-conical shells	107068
Li, Gaochao / Yang, Jie / Cheng, Lin / Zhang, Anan / Tong, Fei / Yuan, Shuai	Research on the mechanical behavior law of local damage of insulation board during the operation period of high arch dams	107216
Zhu, Jingwei / Wang, Ming / Li, Yuan / Cui, Nannan / Xun, Jingchuan	Research on topology optimization strut-and-tie model and prestress construction for cable-pylon anchorage zone of Fengshuba Bridge	107146
Wang, Xuyue / Jia, Sai / Wang, Yuliang / Liu, Zhongxian	Residual bearing capacity of hybrid fibre-reinforced polymer-ultra-high-performance concrete-steel double-skin tubular columns after impact loading	107220
Heydari, Pooria / Mostofinejad, Davood / Eftekhar, Mohammad Reza / Saljoughian, Alireza	Seismic flexural rehabilitation of RC coupling beams with FRP sheets: Evaluation of EBROG technique	107076
Bai, Jiulin / Xu, Weichao / He, Jing / Chen, Huiming	Seismic performance investigation of new buckling-restrained steel plate for resilient rocking column foot joint	107191
Feng, Siyuan / Tao, Yuchen / Yuan, Linlin / Jin, Zhenfen / Zhao, Weijian	Seismic performance of new detailing RCS connection with different axial compression ratio and FBP thickness	107207
Zhang, Feng-Liang / Wu, Bian / Zhang, Min / Liu, Yang	Seismic performance of precast concrete superposed shear walls with CFST end columns subjected to cyclic loading	107142
Yang, Linyi / Ye, Mao / Wu, Zhongkun / Dong, Jingkun	Seismic performance of steel frame structures equipped with novel displacement-amplified friction dampers	107041
Ying-nan, Su / Wei-guo, Yang / Jian-qiang, Zou / Ruo-chen, Ma / Qing-liang, Zhang / You-hong, Gao	Seismic performance of the ST-RC columns to RC beams exterior joint with assembled connection details	107139
He, Qing / Ling, Kangjie / Zhao, Guangxing / Li, Xiaopeng / Liu, Dewen / Yao, Shunzhong / Lei, Min / Sun, WeiWei	Seismic response analysis of overall friction pendulum bearing (OFPB) isolated structures	107224
Song, Jiayu / Pan, Yi / Wang, Teng / Chen, Qi	Seismic response and fragility analysis of railway station typical signal cabinets	107185
Wang, Lei / Wang, Xiaoling / Zhang, Jun / Wang, Jiajun / Yu, Hongling	A self-supervised learning-based approach for detection and classification of dam deformation monitoring abnormal data with imaging time series	107148
Ba, Zhenning / Pei, Yifei / Yu, Feixiang / Liang, Jianwen / Zhang, Yushan	A semi-analytical approach for site-city interaction under oblique incident SH waves	107057
Ozakgul, Kadir / Yilmaz, Mehmet Fatih / Yılmaz, Fatih / Çağlayan, Barlas Özden / Hajirasouliha, Iman	Serviceability fragility assessment of non-seismically designed railway viaducts in Turkey under near-field and far-field earthquakes	107102
Wang, Peng / Huang, Jie / Tao, Yi / Shi, Qingxuan / Wang, Bin	Shear behavior and bearing capacity of reinforced concrete beams with a UHPC stay-in-place formwork	107131
Han, Seulgi / Kim, SunHee / Shin, Jinwon / Choi, Inrak / Choi, Sungmo	Shear performance of FRP panel-reinforced rc columns attached using corner angles and bolts without epoxy resin	107070
Wen, Chen-Bao / Zuo, Jia-Qi / Zhu, Bo-Li / Sun, Hao-Jun / Guo, Yan-Lin / Zheng, Wen-Jin / Deng, Li-Lan	Shear resistance design of prefabricated corrugated steel plate shear walls with reinforced boundary elements	107067
Nguyen, Phan Duy / Dang, Vu Hiep	Shear strength of hybrid GFRP-steel reinforced concrete corbels without vertical stirrups: Experimental research and prediction models	107031
Xu, Youlin / Chen, Zhisong / Wu, Shaokang / Zhang, Jitao / Wu, Xukun / Li, Bin	Simulation and field application study of roadway remodeling load-bearing arch technology	107130
Nguyen, Nam V. / Phan, Duc-Huynh	A size-dependent nonlinear isogeometric approach of bidirectional functionally graded porous plates	107097
Narayanan, Arun / Duddi, Murali / Kocherla, Amarteja / Subramaniam, K. V. L.	Smart and autonomous monitoring of cracking in concrete structures with PZT sensor array-based hybrid sensing	107178
Zhang, Jia-ming / Yu, Chao-Qun / Tong, Gen-shu / Chen, Ming / Tong, Jing-Zhong	Stability design of multi-celled corrugated-plate CFST walls under combined axial and in-plane bending loads	107195
Yao, Xinmei / Wang, Jiqin / Guan, Yu / Shi, Yu	Stability of cold-formed steel stud walls subjected to vertical compression	107095
Meng, Xin / Whitfield, Steve / Boudjabeur, Samir / Gardner, Leroy	Stability of hot-finished and cold-formed steel hollow section columns: A comparative study	107192
Mudenda, Kenny / Zingoni, Alphose	Steel beam upstands as a strengthening approach for doubly symmetric I-shaped sections	107154
Xue, Yiwei / Wang, Chenggong / Lin, Zhansheng / Xu, Zhao / Xu, Changze / Yang, Guotao	Steel-concrete-steel sandwich composite cable-pylon anchorage of cable-stayed bridges: horizontal bearing capacity	107062
Yao, Yue / Fu, Zhongqiu / Ji, Bohai / Wang, Qiudong / Gong, Yunhao	Stress characteristics and cracking mechanism of web-to-stiffener weld in steel plate girder bridges under bending-shear action	107088
Li, WenXiao / Pang, Panwang / El Hoseny, Mohammed / Guo, Chen / Ma, Haowei / Yan, Hongxiang / Ma, Jianxun	Study of an optimized design and reciprocal loading test for a steady-state transition structure	107036
Tian, Penggang / Yang, Wenjie / Cao, Chenyang / Bian, Zhaowei / Yun, Zuoyi / Lu, Junlong	A study of the seismic resistance performance of strengthened masonry walls using polypropylene mesh-composite on the surface	107270
Chen, Haozhe / Yuan, Kang / Guo, Longlong / Zhang, Songlin	Study on seismic failure mechanism and damage model of unconstrained adobe block walls	107107
Liu, Mingliang / Zhao, Junhai / Wang, Yuanqing / Zhou, Chunjuan / Hui, Cun	Study on static performance and dynamic characteristics of a spoke cable-truss suspen-dome system	107162
Shaohui, Liu / Lizhong, Jiang / Wangbao, Zhou / Wangji, Yan / Jian, Yu / Zhenbin, Ren / Jun, Xiao	Study on the equivalent coefficients of seismic-induced track dynamic irregularities based on post-seismic running performance	107225
You, Xuehui / Wang, Peng / Shi, Qingxuan / Rong, Chong	Study on the influence of section dimensions on the shear performance of RC beam with UHPC formwork	107221
Yu, Xiang / Lai, Yuanping / Wang, Yuke / Zhou, Chenguang / Dong, Bowen	Study on the seismic wave input method for earth-rock dam on overburden foundation with dynamic nonlinearity based on nonlinear artificial boundary	107105
Ning, Qiujun / Lu, Jiawei / Lu, Xiaosong / Chen, Xiangrong	Study on the stability bearing capacity of 6061-T6 aluminum alloy axial compression members based on direct strength method	107242
Zhang, Haiping / Long, Hao / Chen, Fanghuai / Luo, Yuan / Xiao, Xinhui / Deng, Yang / Lu, Naiwei / Liu, Yang	Temperature field prediction for a PC beam bridge with corrugated steel webs using BP neural network and measured data	107232
Wang, Xiaofei / Wang, Pengfei / Chen, Wei	Test on progressive collapse of steel moment-resisting frame with upper-and-lower flange angle steel connection	107171
Gong, Yingchun / Chen, Xu / Ren, Haiqing / Liu, Bailong / Zhang, Huanmin / Wang, Yurong	Theoretical and experimental studies on the bending properties of glued laminated timber manufactured with Chinese fir	107149
Chai, Qingdong / Yu, Changyuan / Wang, Yan Qing	Theory and experiment studies on frequency response of conical shells with bolt boundary	107198
Zhang, Hao / Chen, Yiyan / Pan, Jianan / Dong, Jucan / Zhao, Qiu	Torsional behavior of super-span composite box girder with corrugated steel webs	107045
Chen, Huifang / Liang, Jianwen / Li, Dongqiao / Ba, Zhenning	Transverse seismic analysis method of underground interchange prefabricated utility tunnel	107112
Ben Seghier, Mohamed El Amine / Elshaboury, Nehal / Mohammed Abdelkader, Eslam / Carvalho, Hermes / Correa de Faria, Caroline / Miguel, Leandro Fadel	Two-stage framework for lateral-torsional buckling resistance prediction of cellular steel beams under fire conditions	107157
Qu, Songzhao / Yuan, Jun / Zhang, Quan / Sun, Qing	Ultimate strength of multi-ring-stiffened tube-gusset joints with dual-function stiffeners under combined bending and compressive loads	107099
Khanahmadi, Mohtasham / Mirzaei, Borhan / Dezhkam, Behzad / Rezaifar, Omid / Gholhaki, Majid / Amiri, Gholamreza Ghodrati	Vibration-based health monitoring and damage detection in beam-like structures with innovative approaches based on signal processing: A numerical and experimental study	107211
Chen, Jinlin / Niu, Huawei / Zhang, Kun / Dai, Xiaoyan / Ye, Zhiwu / Hua, Xugang / Li, Shouying / Chen, Zhengqing	Wind-induced vibration response of supertall sightseeing tower evaluation during construction through wind tunnel test of aeroelastic models	107100

About this
data sheet
IssueID
74484
Published on:
01/09/2024
Last updated on:
01/09/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structures - October 2024

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structures - October 2024

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.