Structures - August 2019

Published:	August 2019

Articles in this Issue

Author(s)	Title	Page(s)
Rahmani, A. Y. / Bourahla, N. / Bento, R. / Badaoui, M.	Adaptive upper-bound pushover analysis for high-rise moment steel frames	912-923
Pachideh, Ghasem / Gholhaki, Majid / Daryan, Amir Saedi	Analyzing the damage index of steel plate shear walls using pushover analysis	437-451
Simonetti, Hélio Luiz / Almeida, Valério S. / Leitão, Vitor Manuel A. / de Assis das Neves, Francisco	Application of evolutionary structural optimization based on the boundary element method using initial stress fields	550-559
Bock, Marina / Theofanous, Marios / Dirar, Samir / Raybone, Paul	Assessment of web crippling design provisions for application to proprietary soldier beams	147-156
Lee, Adam D. / Alimanza, Jed A. / Shepherd, Paul / Evernden, Mark C.	Axial Rotation and Lateral Torsional Buckling of Extruded Aluminium Mullions in Curtain Wall Facades	658-675
Shaikh, Faiz Uddin Ahmed / Alishahi, Reza	Behaviour of CFRP wrapped RC square columns under eccentric compressive loading	309-323
Ataria, R. B. / Wang, Y. C.	Bending and shear behaviour of two layer beams with one layer of rubber recycled aggregate concrete in tension	214-225
Sridhar, Radhika / Prasad, D. Ravi	Damage assessment of functionally graded reinforced concrete beams using hybrid fiber engineered cementitious composites	832-847
Khan, Ayaz / Gupta, Rishi / Garg, Mohit	Determining material characteristics of "Rammed Earth" using Non-Destructive Test methods for structural design	399-410
Nagavinothini, R. / Chandrasekaran, S.	Dynamic analyses of offshore triceratops in ultra-deep waters under wind, wave, and current	279-289
Gümüş, Muhammed / Arslan, Abdussamet	Effect of fiber type and content on the flexural behavior of high strength concrete beams with low reinforcement ratios	1-10
Vakili, S. Ehsan / Homami, Peyman / Esfahani, M. Reza	Effect of fibers and hybrid fibers on the shear strength of lightweight concrete beams reinforced with GFRP bars	290-297
Tasri, Adek / Susilawati, Anita	Effect of material of post-cooling pipes on temperature and thermal stress in mass concrete	204-212
Mustafa, Maher Al-Tayeb / Hanafi, Ismail / Mahmoud, Rade / Tayeh, B. A.	Effect of partial replacement of sand by plastic waste on impact resistance of concrete: experiment and simulation	519-526
Abd-Elhamed, M. K. / Owida, M. E.	Effect of stirrups densification on ultimate capacity of rectangular reinforced concrete columns	728-764
Shiravand, M. R. / Rasouli, M.	Effects of substructure mass participation on natural period of multi-column base isolated bridges	88-104
Sagadevan, R. / Rao, B. N.	Experimental and analytical investigation of punching shear capacity of biaxial voided slabs	340-352
Abed, Farid / El Refai, Ahmed / Abdalla, Suliman	Experimental and finite element investigation of the shear performance of BFRP-RC short beams	689-701
Yapıcı, Orhan / Gündüz, A. Necmettin / Aksoylar, Cenk	Experimental and numerical investigation of material non-linearity in steel elements under different loading protocols	74-87
Christoforou, Eftychios G. / Phocas, Marios C. / Matheou, Maria / Müller, Andreas	Experimental implementation of the 'effective 4-bar method' on a reconfigurable articulated structure	157-165
Newell, Shane / Goggins, Jamie	Experimental study of hybrid precast concrete lattice girder floor at construction stage	866-885
Huo, Jingsi / Zhang, Xiaofei / Yang, Jin / Xiao, Yan	Experimental study on dynamic behavior of CFRP-to-steel interface	465-475
Ardila-Giraldo, Oscar A. / Pujol, Santiago	Failure mechanisms of small-scale reinforced concrete beams impacted by soft missiles	620-634
Elchalakani, M. / Patel, V. I. / Karrech, A. / Hassanein, M. F. / Fawzia, S. / Yang, B.	Finite element simulation of circular short CFDST columns under axial compression	607-619
Pouladi, Pouya / Ronaldson, John / Clifton, G. Charles / Ingham, Jason M. / Wrzesien, Andrzej M. / Lim, James B. P.	Finite-element assisted design of eaves joint of cold-formed steel portal frames having single channel-sections	452-464
Hama, Sheelan Mahmoud / Mahmoud, Akram Shakir / Yassen, Mohamed Mahir	Flexural behavior of reinforced concrete beam incorporating waste glass powder	510-518
Conrad, Kyle / Phillips, Adam R.	Full scale testing and development of wood-steel composite shear walls	268-278
Russell, J. M. / Sagaseta, J. / Cormie, D. / Jones, A. E. K.	Historical review of prescriptive design rules for robustness after the collapse of Ronan Point	365-373
Kotoky, Needhi / Dutta, Anjan / Deb, Sajal K.	Hybrid testing for evaluation of seismic performance of highway bridge with pier made of HyFRC	848-865
Maheri, Mahmoud R. / Khajeheian, M. K. / Vatanpour, F.	In-plane seismic retrofitting of hollow concrete block masonry walls with RC layers	425-436
BaniAsad, E. / Dehestani, M.	Incorporation of corrosion and bond-slip effects in properties of reinforcing element embedded in concrete beams	105-115
Motwani, Prashant / Laskar, Arghadeep	Influence of excessive end slippage on transfer length of prestressing strands in PC members	676-688
Selvaraj, Sivaganesh / Madhavan, Mahendrakumar	Investigation on sheathing-fastener connection failures in cold-formed steel wall panels	176-188
Narendra, Perumalla V. R. / Prasad, Kartik / Krishna, Ede Hari / Kumar, Vikas / Singh, Konjengbam Darunkumar	Low-Cycle-Fatigue (LCF) behavior and cyclic plasticity modeling of E250A mild steel	594-606
Zampieri, Paolo / Amoroso, Marco / Pellegrino, Carlo	The masonry buttressed arch on spreading support	226-236
Sherman, Ryan J. / Collins, William N. / Connor, Robert J.	Material characterization of high-toughness steel	33-41
Achintha, Mithila / Balan, Bogdan	Mechanical prestressing of annealed glass beams using pretensioned GFRP: Characterisation and potentiality	11-19
Carrillo, Julian / Sánchez, Martha / Bojórquez, Edén	Minimum wall-area index for low-rise concrete housing	903-911
Dong, Minhao / Lokuge, Weena / Elchalakani, Mohamed / Karrech, Ali	Modelling glass fibre-reinforced polymer reinforced geopolymer concrete columns	813-821
van der Spuy, Pierre / Lenner, Roman / de Wet, Tertius / Caprani, Colin	Multiple lane reduction factors based on multiple lane weigh in motion data	543-549
Yang, Yaqiang / Fahmy, Mohamed F. M. / Cui, Jing / Pan, Zhihong / Shi, Jianzhe	Nonlinear behavior analysis of flexural strengthening of RC beams with NSM FRP laminates	374-384
Momeni, Mohammad / Hadianfard, Mohammad Ali / Bedon, Chiara / Baghlani, Abdolhossein	Numerical damage evaluation assessment of blast loaded steel columns with similar section properties	189-203
Roy, Krishanu / Lim, James B. P.	Numerical investigation into the buckling behaviour of face-to-face built-up cold-formed stainless steel channel sections under axial compression	42-73
Saleh, Zein / Sheikh, M. Neaz / Remennikov, Alex M. / Basu, Abheek	Numerical investigations on the flexural behavior of GFRP-RC beams under monotonic loads	255-267
Jumaa, Ghazi Bahroz / Yousif, Ali Ramadhan	Numerical modeling of size effect in shear strength of FRP-reinforced concrete beams	237-254
Li, Zhejian / Chen, Wensu / Hao, Hong	Numerical study of blast mitigation performance of folded structure with foam infill	581-593
Nasrin, Sabreena / Ibrahim, Ahmed	Numerical study on the low-velocity impact response of ultra-high-performance fiber reinforced concrete beams	570-580
Akın, Emre	Open ground story in properly designed reinforced concrete frame buildings with shear walls	822-831
Girão Coelho, Ana M. / Lawson, R. Mark / Aggelopoulos, Eleftherios S.	Optimum use of composite structures for demountable construction	116-133
Saranya, P. / Nagarajan, Praveen / Shashikala, A. P.	Performance evaluation of geopolymer concrete beams under monotonic loading	560-569
Siam, Ahmad S. / Ezzeldin, Mohamed / El-Dakhakhni, Wael	Reliability of displacement capacity prediction models for reinforced concrete block shear walls	385-398
Shoaei, Parham / Mahsuli, Mojtaba	Reliability-based design of steel moment frame structures isolated by lead-rubber bearing systems	765-778
Graciano, Carlos / Loaiza, Nelson / Casanova, Euro	Resistance of slender austenitic stainless steel I- girders subjected to patch loading	924-934
Dehghani, Ayoub / Aslani, Farhad	A review on defects in steel offshore structures and developed strengthening techniques	635-657
Areiza-Hurtado, Mauricio / Aristizabal-Ochoa, J. Dario	Second-order analysis of a beam-column on elastic foundation partially restrained axially with initial deflections and semirigid connections	134-146
Attari, Nassereddine / Youcef, Youcef Si / Amziane, Sofiane	Seismic performance of reinforced concrete beam–column joint strengthening by frp sheets	353-364
Kumar, M. Suneel / Senthilkumar, R. / Sourabha, L.	Seismic performance of special concentric steel braced frames	166-175
Kabir, Mohammad Z. / Rezaifar, Omid	Shaking table examination on dynamic characteristics of a scaled down 4-story building constructed with 3D-panel system	411-424
Ahmed, Ghafur H. / Aziz, Omar Q.	Shear strength of joints in precast posttensioned segmental bridges during 1959–2019, review and analysis	527-542
Selvaraj, Sivaganesh / Madhavan, Mahendrakumar	Sheathing braced design of cold-formed steel structural members subjected to torsional buckling	489-509
Abdelrahman, A. H. A. / Du, Zuo-Lei / Liu, Yao-Peng / Chan, Siu-Lai	Stability design of single angle member using effective stress-strain method	298-308
Areiza-Hurtado, Mauricio / Vega-Posada, Carlos A. / Aristizabal-Ochoa, J. Dario	Stiffness matrix and loading vector of a two-layer Timoshenko composite beam	20-32
Hosseini, Alireza Sadat / Bahaari, Mohammad Reza / Lesani, Mohammad	Stress concentration factors in FRP-strengthened offshore steel tubular T-joints under various brace loadings	779-793
Tang, Gan / Yin, Lingfeng / Li, Zhanjie / Li, Yong / You, Liguo	Structural behaviors of bolted connections using laminated bamboo and steel plates	324-339
Alrebeh, Salih K. / Ekmekyapar, Talha	Structural performance of short concrete-filled steel tube columns with external and internal stiffening under axial compression	702-716
natesan, vijayakumar / Madhavan, Mahendrakumar	Structural performance on bolted sleeved connections between two CFS channel sections subjected to combined bending and shear	794-812
Govindan, Senthil kumar / Madhavan, Mahendrakumar	Study on cold-formed and hot rolled steel composite panel system	886-902
Yalciner, Hakan / Kumbasaroglu, Atila / Turan, Ahmet İhsan	Torsional behavior of reinforced concrete beams with corroded reinforcement	476-488
Keyvani, Sharare / Hoseini Vaez, Seyed Rohollah	Using DLO procedure to investigate the effect of openings on ultimate load and collapse pattern of slabs	717-727

About this
data sheet
IssueID
28267
Published on:
02/03/2019
Last updated on:
26/07/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structures - August 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structures - August 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.