Structural Concrete - v. 25, n. 1 (January 2024)

Published:	January 2024

Articles in this Issue

Author(s)	Title	Page(s)
Ingle, Vaibhav Vinod / Kaliyavaradhan, Senthil Kumar / Ambily, P. S. / Shekar, Deepadharshan	3D printable concrete without chemical admixtures: Fresh and hardened properties	365-378
Zhou, Chaoyang / Fan, Wenhua / Tang, Ming / Wang, Yi	Analysis of interfacial stresses on narrow beams strengthened by FRP straps with a side anchorage system	603-619
Chu, Yunpeng / Yi, Gangxin / Song, Gu / Liang, Feng / Gong, Yindong	Analysis of the influence on structural seismic performance by the composite reinforcement method	549-565
Esmaeili‐Falak, Mahzad / Sarkhani Benemaran, Reza	Application of optimization‐based regression analysis for evaluation of frost durability of recycled aggregate concrete	716-737
Sun, Qingmei	Artificial rabbit optimization‐based ANFIS model development for predicting the compressive strength of GGBFS‐based concrete	334-348
Saleh, Eman / Murad, Yasmin / Tarawneh, Ahmad / Alghossoon, Abdullah / Almasabha, Ghassan	Automated analysis and design for recycled aggregate reinforced concrete beams	207-224
van der Esch, Anton / Wolfs, Rob / Fennis, Sonja / Roosen, Marco / Wijte, Simon	Categorization of formulas for calculation of crack width and spacing in reinforced concrete elements	32-48
Anto, J. / Bhuvaneshwari, M.	A comprehensive summary on the enhancement of properties of concrete with recycled polypropylene materials	225-238
Godart, Bruno / Dierkens, Michael / Cordier, Nathalie / Thauvin, Benoît / Bouichou, Myriam / Marie‐Victoire, Elisabeth	Data acquired on some old reinforced concrete structures to validate the threshold levels of the French performance‐based method for the durability of concrete structures	677-695
Zhang, Zaiyu / Li, Wenshi / Guo, Xiaoyang / Sun, Qing / Tian, Penggang / Wu, Yanru	Development of theoretical model for predicting flexural behavior of GFRP reinforced concrete beams with CFRP grid‐reinforced ECC	583-602
Chen, Ju / Hu, Liang / Wang, Jun / Song, Sha‐Sha	Eccentric compression behavior of circular concrete‐filled steel tubes reinforced with internal latticed steel angles	169-184
Niu, Haicheng / Li, Bohan / Gao, Jinlong / Xie, Shu	Effect of hybrid fibers on the flexural performance of high‐strength recycled aggregate concrete beams	403-422
Ali, Manar / Elsayed, Mahmoud / Tayeh, Bassam A. / Maglad, Ahmed M. / El‐Azim, Ahmed Abd	Effect of hybrid steel, polypropylene, polyvinyl alcohol, and jute fibers on the properties of ultra‐high performance fiber reinforced concrete exposed to elevated temperature	492-505
Abu el‐hassan, Khaled / Hakeem, Ibrahim Y. / Amin, Mohamed / Tayeh, Bassam A. / Zeyad, Abdullah M. / Agwa, Ibrahim Saad / Elsakhawy, Yara	Effects of nano titanium and nano silica on high‐strength concrete properties incorporating heavyweight aggregate	239-264
Chang, Wei / Hao, Meijing / Zheng, Wenzhong	Estimation of ductility of concrete columns under horizontal seismic load	111-136
Miclăușoiu, Dan‐Andrei / Nedelcu, Mihai / Blanksvärd, Thomas	Experimental and numerical analysis of different vertical connections of precast shear walls with special regard towards deformability	85-110
Sepulveda, B. D. G. / Visintin, P. / Sturm, A. B. / Oehlers, D. J.	Experimental and theoretical analysis of cracking and tension stiffening in UHPFRC under high‐cycle fatigue	379-402
Khaloo, Alireza / Khodabakhshi, Nahid / Raissi Dehkordi, Morteza	Experimental investigation of innovative reinforcement method for two‐way concrete slabs using perforated steel plates	49-68
Rossi, Edoardo / Randl, Norbert / Mészöly, Tamás / Harsányi, Peter	Experimental investigation on shear strengthening with fiber/textile reinforced concrete	537-548
Marchão, Carla / Marreiros, Rui / Ribeiro, Filipe	Experimental study on the cracking behavior of anchorage zones	154-168
Li, Dong / Hejazi, S. M. Ali S. / Jin, Liu / Du, Xiuli	An extended universal morphological model for concrete mode‐I fracture: Parametric and case studies	265-282
Feng, Ran / Tang, Jing‐Pu / Liu, Panpan / Wang, Fangying / Zeng, Jun‐Jie / Zhu, Ji‐Hua	Flexural and cracking behavior of corroded RC continuous beams strengthened with energized C‐FRCM system	659-676
Sharifi, Yasser / Visrudi, Hasan Najafi	Hydrochloric acid resistance of mortars incorporating waste glass powder as cementitious materials	303-319
Hu, Xinyu / Xue, Weichen / Zheng, Renguang	Hysteretic performance of prestressed concrete beams with AFRP tendons under cyclic loading	620-636
Skadins, Ulvis / Červenka, Jan	Lessons learnt from blind competition of shear behavior of fiber‐reinforced concrete T‐beam	506-525
Wang, Kai‐Lai / Li, Jingyi / Li, Li / Deng, E. / Zhang, Yang / Li, Zongli	Machine learning to estimate the bond strength of the corroded steel bar‐concrete	696-715
Mai, Anh Duc / Sheikh, M. Neaz / Nguyen, Quang Trung / Pham, Anh Duc / Hadi, Muhammad N. S.	A new approach for the strength interaction diagram of FRP strengthened square steel reinforced high strength concrete columns	637-658
Júnior, Edmir José dos Santos / Krahl, Pablo Augusto / Monteiro, Francisco Alex Correia / Cordeiro, Sérgio Gustavo Ferreira	New damage evolution law in plastic damage models for fiber‐reinforced cementitious composites	440-455
Ahmed, Mizan / Shahin, Ramy I. / Yehia, Saad A. / Emara, Mohamed / Patel, Vipulkumar Ishvarbhai / Liang, Qing Quan	Nonlinear analysis of square steel‐reinforced concrete‐filled steel tubular short columns considering local buckling	69-84
Tahir, Muhammad / Shoaib Karam, Muhammad / Hassam, Muhammad / Umer, Muhammad / Hameed, Rashid	Numerical evaluation of axial compressive behavior of hollow concrete columns reinforced with GFRP bars and spirals	566-582
Vandevyvere, Brecht / Vandewalle, Lucie / Li, Jiabin	Numerically optimized post‐cracking branch of the constitutive tensile model for fiber‐reinforced concrete with natural and recycled aggregates	473-491
Chao, Xu	Optimal boosting method of HPC concrete compressive and tensile strength prediction	283-302
Miceli, Elena / Castaldo, Paolo	Robustness improvements for 2D reinforced concrete moment resisting frames: Parametric study by means of NLFE analyses	9-31
Poorahad Anzabi, Pooria / Shiravand, Mahmoud R.	Segments arrangement effect on improvement of self‐centering precast post‐tensioned segmental piers seismic performance	185-206
Iavarone, Fabiola / Vecchio, Frank J. / Plizzari, Giovanni / Minelli, Fausto	Shear bond between existing concrete and high‐strength fiber reinforced overlay: Influence of substrate strength and interface roughness	526-536
Attia, Mohammed M. / Abdelsalam, Bassam Abdelsalam / Eita, M. A. / Ahmed, Mizan / Liang, Qing Quan / Rageh, Basem O.	Tests and finite element modeling of concrete beams reinforced with reused steel bars	137-153
Jamal, Ahmed Salah / Bzeni, Dillshad K. H. / Shi, Jinyan	Thermal and mechanical performance of lightweight geopolymer concrete with pumice aggregate	349-364
Nováček, Jan / Tomečka, Petr / Stráský, Jiří	Tram stop Výstaviště in Prague Holešovice	5-8
Karim, Rizwan / Shafei, Behrouz	Ultra‐high performance concrete under direct tension: Investigation of a hybrid of steel and synthetic fibers	423-439

About this
data sheet
IssueID
71851
Published on:
10/02/2024
Last updated on:
10/02/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structural Concrete - v. 25, n. 1 (January 2024)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structural Concrete - v. 25, n. 1 (January 2024)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.