Structural Concrete - v. 24, n. 4 (July 2023)

Published:	July 2023

Articles in this Issue

Author(s)	Title	Page(s)
Höffgen, Jan P. / Malárics‐Pfaff, Viktória / Wengrzik, Doris B. / Dehn, Frank	Analysis and evaluation of direct shear tests on concrete joints in hydraulic structures	5055-5062
Berrocal, Carlos G. / Chen, E. / Löfgren, Ingemar / Lundgren, Karin	Analysis of the flexural response of hybrid reinforced concrete beams with localized reinforcement corrosion	4799-4822
Ruiz, Rafael / Todisco, Leonardo / Corres, Hugo	Application of high‐performance fibre reinforced concrete to precast girders for road bridges: Conceptual considerations and numerical analyses	4645-4659
	Approach to assessment of existing structures in the fib Model Code 2020	4387-4395
	Assessment of existing structures in fib ModelCode 2020: Solutions and examples	4424-4432
Biricik, Öznur / Husein Bayqra, Sultan / Kaya, Yahya / Mardani, Ali	Assessment of mechanical properties of fiber reinforced cementitious system exposed to high temperature	4733-4750
Colombo, Matteo / Conforti, Antonio / di Prisco, Marco / Leporace‐Guimil, Bruno / Plizzari, Giovanni / Zani, Giulio	The basis for ductility evaluation in SFRC structures in MC2020: An investigation on slabs and shallow beams	4406-4423
Haavisto, Jukka / Alho, Heikki / Laaksonen, Anssi	Behavior of lap splices in reinforced concrete beams after bar yielding	5245-5264
Anil, Özgür / Cevik, Abdulkadir	Bond‐slip model between anchored CFRP strip and concrete by using ANN	4841-4868
Pressmair, Nadine / Xia, Yi / Wu, Hongfei / Langelaar, Matthijs / Hendriks, Max A. N. / Majdouba, Ahmad / Mogra, Mihir / Grisaro, Hezi / Amir, Oded / Kromoser, Benjamin	Bridging the gap between mathematical optimization and structural engineering: Design, experiments and numerical simulation of optimized concrete girders	5314-5330
Golafshani, Emadaldin Mohammadi / Kashani, Alireza / Arashpour, Mehrdad	Chloride diffusion modeling of concrete using tree‐based forest models	5614-5634
Umar, Hussaini Abdullahi / Zeng, Xiaohui / Long, Guangcheng / Li, Yirui / Zhao, Hong	The combined effect of fiber and asphalt emulsion on properties of self‐compacting concrete	5465-5480
Kumar, Rakesh / Rai, Baboo / Samui, Pijush	A comparative study of prediction of compressive strength of ultra‐high performance concrete using soft computing technique	5538-5555
Kocaer, Oznur / Aldemir, Alper	Compressive stress–strain model for the estimation of the flexural capacity of reinforced geopolymer concrete members	5102-5121
Hassani, Mohammad Sheikh / Matos, José C. / Zhang, Y. X. / Teixeira, Elisabete	Concrete production with domestic and industrial wastewaters—A literature review	5582-5599
Ueda, Tamon / Shimomura, Takumi / Matthews, Stuart L.	Conservation and intervention in MC2020	4464-4475
Fang, Yumin / Zhang, Huzhi / Yin, Bin	Construction of strut‐and‐tie models for members under complex stress states based on topology optimization	5233-5244
Torrijos, María C. / Zerbino, Raul L. / Giaccio, Graciela M. / Cuenca, Estefanía / Conforti, Antonio	Contribution of steel fibers to the flexural and shear behavior of RC beams damaged by alkali‐silica reaction	4719-4732
Wang, Jialei / Wang, Yao / Wang, Rui / Li, Wangxin / Xu, Yidong	Creep behavior of graphene oxide reinforced cement composites: Experiments, numerical simulations, and prediction models	5441-5450
Ruiz, Rafael / Doniak, Lígia Oliva / Todisco, Leonardo / Corres, Hugo	Database of shear tests for prestressed fibre reinforced concrete beams without vertical stirrups and comparison with code provisions	4565-4576
	Design method for bridge deck link slabs prepared using BFRP bar‐reinforced ecological high‐ductility cementitious composites by theoretical calculation and numerical simulation	4889-4902
Vestergaard, Daniel / Poulsen, Peter Noe / Cao Hoang, Linh / Larsen, Kasper Paaske / Feddersen, Bent	Design‐oriented nonlinear‐elastic buckling analysis of reinforced concrete wall structures using convex optimization	5167-5183
	Effect of chloride penetration on CFRP sheet, CFRP‐concrete interface, and CFR‐strengthened concrete beams	4869-4888
Rezvaniyanzadeh, Alireza / Fadaee, Mohammad Javad	Effect of ground granulated blast furnace slag on the properties of hybrid‐fiber‐reinforced high‐strength concrete under normal and high temperatures	4680-4701
Mathews, Grady / Wertz, Brady / Khan, Taha / Jafari, Khashayar / Loux, Theresa / Bylone, Robert	Evaluation of ultralightweight foamed glass aggregates in precast concrete	5406-5416
Kasuga, Akio	Evolution of fib model codes: Mastering challenges and encountering new ones	4336-4340
Palieraki, Vasiliki / Oikonomopoulou, Erato / Genesio, Giovacchino / Vintzileou, Elizabeth	Experimental cyclic behavior of concrete interfaces with postinstalled reinforcing bars or alternative connectors	5265-5283
	Experimental investigation of a precast segmental Twin‐Deck box girder bridge simultaneously erected with double bridge erection gantries	4492-4503
Lima de Resende, Thomás / Taissum Cardoso, Daniel Carlos	Experimental investigation of the shear behavior of steel fiber reinforced concrete slender beams without stirrups through crack kinematics and shear transfer mechanisms	4779-4798
Dinh, Ngoc Hieu / Pham, Huu Hiep / Kim, Seung‐Hee / Choi, Kyoung‐Kyu	Experimental investigation on flexural and direct shear behaviors of specimens made of lightweight carbon textile‐reinforced cementitious composites	5027-5054
Sun, Chuanzhi / Zhuang, Mei‐Ling / Wang, Zhenbo / Chen, Baodong / Gao, Li / Qiao, Yan / Zhu, Hanbo / Zhang, Weihua / Yang, Jun / Yu, Changrong	Experimental investigation on the seismic performance of prefabricated fiber‐reinforced concrete beam‐column joints using grouted sleeve connections	4702-4718
	Experimental investigation on the use of Fabric‐Reinforced Cementitious Mortars for the retrofitting of reinforced concrete dapped‐end beams	4577-4605
Thoma, Sebastian / Fischer, Oliver	Experimental investigations on the shear strength of prestressed beam elements with a focus on the analysis of crack kinematics	4993-5010
Buda‐Ożóg, Lidia / Zięba, Joanna / Sieńkowska, Katarzyna / Nykiel, Damian	Experimental research and numerical simulations of the actual response flat slab in case of column loss	5331-5348
Xu, Hai‐Yang / Wang, Dan‐Dan / Wang, Ruo‐Yun / Kang, Shao‐Bo / Liu, Kun	Experimental studies on tensile behavior of reinforced engineered cementitious composite members with double steel rebars	5522-5537
Yavuz, Demet / Yazici, Şemsi	Experimental study of aggregate size and gradation on pervious concretes' mechanic, hydraulic, and surface properties	5451-5464
Liu, Pin / Guo, Chen / Cui, Shengai / Xia, Wei / Wang, Xuewei / Chen, Xuemei	Experimental study on crack propagation process of rock‐concrete interface in hot‐dry curing environment at different temperatures	5506-5521
Geng, Fei / Xu, Chao / Wen, Zengping	Explicitly quantifying the effect of bond stress on the failure of reinforced concrete membranes	5284-5298
Zhu, Feng / Bergmeister, Konrad	FE‐analysis of long‐term performance of an epoxy bonded anchor based on nanoindentation and CT‐scan	5086-5101
Rubino, Alessio / Accornero, Federico / Carpinteri, Alberto	Flexural behavior and minimum reinforcement condition in hybrid‐reinforced concrete beams	4767-4778
Su, Chang / Wang, Xin / Ding, Lining / Liu, Shui / Wu, Zhishen	Flexural property and design method evaluation of BFRP and steel bars hybrid reinforced concrete beams	4942-4959
Liu, Zhao / Lei, Haipeng	Graphical modeling of discontinuous stress field for RC deep beams under uniform load	5011-5026
Jiang, Zhisheng / Zheng, Wenzhong / Wang, Ying / Li, Sheng / Sun, Linqi	Green demolition technology of reinforced concrete slab: Application of soundless chemical demolition agents and its evaluation system	4549-4564
Vandevyvere, Brecht / Vandewalle, Lucie / Li, Jiabin	Improved simplified constitutive tensile model for fiber‐reinforced concrete	4624-4644
	Integrating near‐surface mounted SMA and externally bonded CFRP for concrete beams strengthened in flexure	4903-4916
Li, Shengyu / Hong, Yu / Chen, Liangjun / Pu, Qianhui	Investigation of the strut‐and‐tie model of a single‐plane cable‐stayed bridge tower under vertical component of the cable force	4515-4529
Guo, Wenqi / Feng, Kun / Zhou, Yili / Cao, Xiangpeng / Zhao, Lixiang	Investigation on the shear performance of circumferential joints of segments in super‐large cross‐section shield tunnels	4978-4992
Thüsing, Kai / Sobotta, Sacha / Schlüter, Dominik / Hoinka, Jennifer / Ayoubi, Mazen / Kropp, Thomas / Schumann, Alexander / Drossel, Welf‐Guntram	Iron‐based shape memory alloy active assembly connectors for civil structures	5184-5196
Petraroia, Diego N. / Medeghini, Filippo / Plückelmann, Sven / Mark, Peter / Breitenbücher, Rolf	Material reduced tunnel lining segments for moderately swelling soils	5150-5166
Ma, Jinfeng / Bai, Guoliang / Liang, Lili / Wang, Lei / Su, Ningfen	Mechanical behavior of semi‐grouting sleeve and steel bar connection	5299-5313
Wu, Huiqin / Zhu, Zhen / Chen, Yuliang / Li, Hong / Jiang, Weiqin	Mechanical properties of short polypropylene fiber enhanced recycled concrete under cyclic compression	4751-4766
Şahin, Hatice Gizem / Mardani, Ali	Mechanical properties, durability performance and interlayer adhesion of 3DPC mixtures: A state‐of‐the‐art review	5481-5505
Ben Seghier, Mohamed El Amine / Golafshani, Emadaldin Mohammadi / Jafari‐Asl, Jafar / Arashpour, Mehrdad	Metaheuristic‐based machine learning modeling of the compressive strength of concrete containing waste glass	5417-5440
Markić, Tomislav / Kaufmann, Walter	Modeling and design of concrete hinges under general loading	5122-5149
Müller, Harald S. / Boumaaza, Mouna	Modeling concrete properties: New approaches in MC2020	4396-4405
Strauss, Alfred / Bergmeister, Konrad / Daró, Paola / Mancini, Giuseppe / Sattler, Fabian / Bigaj‐van Vliet, Agnieszka	Monitoring and data‐informed approaches for the assessment of existing structures	4433-4445
Metelli, Giovanni / Cairns, John / Plizzari, Giovanni	A new fib Model Code proposal for a beam‐end type bond test	4446-4463
Kazemi, Ramin / Eskandari‐Naddaf, Hamid / Korouzhdeh, Tahereh	New insight into the prediction of strength properties of cementitious mortar containing nano‐ and micro‐silica based on porosity using hybrid artificial intelligence techniques	5556-5581
Zaghian, Sepideh / Martín‐Pérez, Beatriz / Almansour, Husham / Shirkhani, Hamidreza	Nonlinear finite element modeling of bridge piers under the combined effect of corrosion, freeze–thaw cycles, and service load	5215-5232
Kurt, Zafer / Ustabas, Ilker / Cakmak, Talip	Novel binder material in geopolymer mortar production: Obsidian stone powder	5600-5613
Havaei, GholamReza	Numerical evaluation of seismically retrofitted bridge concrete column under extreme loading	5349-5369
Divya, M. / Sripathibabu, Arun Krishna Vellore / Rajendran, Senthilkumar	Numerical studies on the behavior of cold‐formed double‐channel shear connector	5197-5214
Ali, Yahia M. S. / Wang, Xin / Abdelaleem, Tarek / Liu, Shui / Wu, Zhishen	Numerical study on the structural performance of the continuous concrete slabs reinforced with hybrid BFRP/steel bars	4917-4941
Matthews, Stuart / Bigaj‐van Vliet, Agnieszka / Dieteren, Gerrie	Outlook upon fib Model Code for Concrete Structures (2020)	4334-4335
Ruiz, Rafael / Starchevich, Gian Biagio / Todisco, Leonardo / Corres, Hugo	Parametric analysis of variables influencing the design of I‐girder bridge decks made of high‐performance fiber reinforced concrete	4606-4623
Soniya, Soundararaj Manju / Chithra, Rethnasamy	Performance analysis of cost‐effective hybrid polypropylene‐steel engineered cementitious composites and prediction based on artificial neural network	4823-4840
Bigaj‐van Vliet, Agnieszka / Matthews, Stuart	Performance‐based approach in model code 2020: Working on future‐oriented standardization	4362-4367
Ruiz, Miguel Fernández / Regúlez, Borja / Todisco, Leonardo / Faria, Duarte M. V. / Corres, Hugo	Reliability‐ and sustainability‐driven strategies for the maintenance of existing structures	4530-4548
Fernández‐Ordóñez, David / Ruiz, Miguel Fernández / Tošić, Nikola / Wan‐Wendner, Roman / de la Fuente, Albert	Rethinking databases: The fib project for a connected data repository	4480-4491
Formisano, Antonio / Felitti, Matteo / Oliveto, Francesco / Mendicino, Lorenzo	The robustness of reinforced concrete tied arch bridges: A case study	4504-4514
Rettinger, Martin / Hückler, Alex / Schlaich, Mike	Rosensteinsteg II—A cable footbridge with deck elements of CFRP‐reinforced concrete	4476-4479
Huang, Zhenyu / Deng, Weixiong / Zhao, Xiaolong / Zhou, Yingwu / Xing, Feng / Hou, Pengkun / Chen, Cheng	Shear design and life cycle assessment of novel limestone calcined clay cement reinforced concrete beams	5063-5085
Jędrzejewska, Agnieszka / Zych, Mariusz / Kanavaris, Fragkoulis / Chen, Fangjie / Ito, Shintaro / Torrenti, Jean Michel / Schlicke, Dirk / Asamoto, Shingo / Azenha, Miguel	Standardized models for cracking due to restraint of imposed strains—The state of the art	5388-5405
Jovanović, Balša / Caspeele, Robby / Lombaert, Geert / Reynders, Edwin / Van Coile, Ruben	State‐of‐the‐art review on the post‐fire assessment of concrete structures	5370-5387
Hájek, Petr	Sustainability perspective in fib MC2020: Contribution of concrete structures to sustainability	4352-4361
Lee, Minu / Mata‐Falcón, Jaime / Popescu, Mariana / Kaufmann, Walter	Thin‐walled concrete beams with stay‐in‐place flexible formworks and integrated textile shear reinforcement	4960-4977
Bayrak, Barış / Kılıç, Mahmut / Maali, Mahyar / Çelebi, Oğuzhan / Aydın, Abdulkadir Cüneyt	Torsional behavior of hybrid fiber reinforced shear walls an experimental point of view	4660-4679
Caspeele, Robby / Van Den Hende, Karel	Validation of the harmonized partial factor method for design and assessment of concrete structures as proposed for fib model code 2020	4368-4376
Andrade, Carmen / Linger, Lionel	Verification of durability of new and existing structures through the design, construction and operational phases	4377-4386

About this
data sheet
IssueID
70311
Published on:
01/09/2023
Last updated on:
01/09/2023

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structural Concrete - v. 24, n. 4 (July 2023)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structural Concrete - v. 24, n. 4 (July 2023)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.