Smart Materials and Structures - v. 20, n. 1 (January 2011)

Published:	January 2011

Articles in this Issue

Author(s)	Title	Page(s)
Hoang, N. / Zhang, N. / Du, H.	An adaptive tunable vibration absorber using a new magnetorheological elastomer for vehicular powertrain transient vibration reduction	015019
Weber, F. / Boston, C. / Maślanka, M.	An adaptive tuned mass damper based on the emulation of positive and negative stiffness with an MR damper	015012
Kim, Sang-Myeong / Wang, Semyung / Brennan, Michael J.	Comparison of negative and positive position feedback control of a flexible structure	015011
Schröck, Johannes / Meurer, Thomas / Kugi, Andreas	Control of a flexible beam actuated by macro-fiber composite patches: I. Modeling and feedforward trajectory control	015015
Schröck, Johannes / Meurer, Thomas / Kugi, Andreas	Control of a flexible beam actuated by macro-fiber composite patches: II. Hysteresis and creep compensation, experimental results	015016
Krahn, J. / Sameoto, D. / Menon, C.	Controllable biomimetic adhesion using embedded phase change material	015014
Park, Jae-Sang / Kim, Seong-Hwan / Jung, Sung Nam / Lee, Myeong-Kyu	Design and analysis of variable-twist tiltrotor blades using shape memory alloy hybrid composites	015001
Jang, Hong-Kyu / Lee, Won-Jun / Kim, Chun-Gon	Design and fabrication of a microstrip patch antenna with a low radar cross section in the X-band	015007
Wang, Quan / Wu, Nan	Detecting the delamination location of a beam with a wavelet transform: an experimental study	012002
Li, C. / Lim, C. W. / Yu, J. L.	Dynamics and stability of transverse vibrations of nonlocal nanobeams with a variable axial load	015023
Kang, Tae June / Choi, Ajeong / Kim, Dai-Hong / Jin, Kyoungcheol / Seo, Dong Kyun / Jeong, Dae Hong / Hong, Seong-Hyeon / Park, Yung Woo / Kim, Yong Hyup	Electromechanical properties of CNT-coated cotton yarn for electronic textile applications	015004
Liang, Junrui / Liao, Wei-Hsin	Energy flow in piezoelectric energy harvesting systems	015005
Lu, Xi / Lu, Mingyu / Zhou, Li-min / Su, Zhongqing / Cheng, Li / Ye, Lin / Meng, Guang	Evaluation of welding damage in welded tubular steel structures using guided waves and a probability-based imaging approach	015018
Yip, Joanne / Feng, Li Shu / Hang, Choy Wing / Marcus, Yuen Chun Wah / Wai, Kan Chi	Experimentally validated improvement of IPMC performance through alternation of pretreatment and electroless plating processes	015009
Kim, Gi-Woo / Wang, K. W.	Helmholtz resonance in a piezoelectric–hydraulic pump-based hybrid actuator	015010
Angioni, S. L. / Meo, M. / Foreman, A.	Impact damage resistance and damage suppression properties of shape memory alloys in hybrid composites—a review	013001
Ji, Hongli / Qiu, Jinhao / Xia, Pinqi / Guyomar, Daniel	The influence of switching phase and frequency of voltage on the vibration damping effect in a piezoelectric actuator	015008
Pertsch, Alexander / Kim, Jin-Yeon / Wang, Yang / Jacobs, Laurence J.	An intelligent stand-alone ultrasonic device for monitoring local structural damage: implementation and preliminary experiments	015022
Garcia, Ephrahim	Introduction to the 2011 volume	010201
Feng, Guo-Hua / Tsai, Jen-Wei	Investigation of electrical to mechanical energy conversion of a three-dimensional four-electrode multidirectional-controllable IPMC transducer with/without an optical fiber enclosed	015027
Glushkov, Evgeny / Glushkova, Natalia / Lammering, Rolf / Eremin, Artem / Neumann, Mirko N.	Lamb wave excitation and propagation in elastic plates with surface obstacles: proper choice of central frequencies	015020
Wang, Gang / Chen, Shengbing / Wen, Jihong	Low-frequency locally resonant band gaps induced by arrays of resonant shunts with Antoniou's circuit: experimental investigation on beams	015026
Xu, Dehui / Xiong, Bin / Wang, Yuelin	Micromachined thermoelectric IR sensors fabricated by a self-aligned process	015013
Dissanayake, Don W. / Al-Sarawi, Said / Abbott, Derek	Modelling and simulation of wirelessly and securely interrogated low-powered actuators for bio-MEMS	015025
Hu, J. / Xu, F. / Huang, A. Q. / Yuan, F. G.	Optimal design of a vibration-based energy harvester using magnetostrictive material (MsM)	015021
Peters, Kara	Polymer optical fiber sensors—a review	013002
Ozbulut, Osman E. / Hurlebaus, Stefan	Seismic assessment of bridge structures isolated by a shape memory alloy/rubber-based isolation system	015003
Yuan, Yan Chao / Ye, Yueping / Rong, Min Zhi / Chen, Haibin / Wu, Jingshen / Zhang, Ming Qiu / Qin, Shi Xiang / Yang, Gui Cheng	Self-healing of low-velocity impact damage in glass fabric/epoxy composites using an epoxy–mercaptan healing agent	015024
Chughtai, Saulat S. / Werner, Herbert	Simply structured controllers for parameter varying distributed systems	015006
Yin, Jianbo / Xia, Xiang / Xiang, Liqin / Zhao, Xiaopeng	Temperature effect of electrorheological fluids based on polyaniline derived carbonaceous nanotubes	015002
Huang, H. / Paramo, D. / Deshmukh, S.	Unpowered wireless transmission of ultrasound signals	015017
Smith, Colin / Villanueva, Alex / Joshi, Keyur / Tadesse, Yonas / Priya, Shashank	Working principle of bio-inspired shape memory alloy composite actuators	012001

About this
data sheet
IssueID
21282
Published on:
02/12/2018
Last updated on:
03/08/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Smart Materials and Structures - v. 20, n. 1 (January 2011)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Smart Materials and Structures - v. 20, n. 1 (January 2011)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.