Materials and Structures - v. 50, n. 5 (October 2017)

Published:	October 2017

Author(s)	Title	Page(s)
Boccadoro, Lorenzo / Steiger, René / Zweidler, Simon / Frangi, Andrea	Analysis of shear transfer and gap opening in timber–concrete composite members with notched connections
Botas, Sandro / Veiga, Rosário / Velosa, Ana	Bond strength in mortar/ceramic tile interface—testing procedure and adequacy evaluation
Gaurav, Govind / Singh, Bhupinder	Bond strength prediction of tension lap splice for deformed steel bars in recycled aggregate concrete
Medina, J. M. / Sáez del Bosque, I. F. / Frías, M. / Sánchez de Rojas, M. I. / Medina, C.	Characterisation and valorisation of biomass waste as a possible addition in eco-cement design
O'Flaherty, Fin / Lambert, Paul / Mangat, Pal / Starinieri, Vincenzo	Determination of transfer stress from ruptured pre-load galvanised tendons in tanks and bund walls
Zapała-Sławeta, J.	The effect of meta-halloysite on alkali–aggregate reaction in concrete
Huang, Haidong / Garcia, Reyes / Guadagnini, Maurizio / Pilakoutas, Kypros	Effect of section geometry on development of shrinkage-induced deformations in box girder bridges
Farzanian, K. / Ghahremaninezhad, A.	The effect of the capillary forces on the desorption of hydrogels in contact with a porous cementitious material
Ferrotti, Gilda / Ragni, Davide / Lu, Xiaohu / Canestrari, Francesco	Effect of warm mix asphalt chemical additives on the mechanical performance of asphalt binders
Lin, Xiaoshan / Gravina, Rebecca J.	An effective numerical model for reinforced concrete beams strengthened with high performance fibre reinforced cementitious composites
Frank, Timothy E. / Lepech, Michael D. / Billington, Sarah L.	Experimental testing of reinforced concrete and reinforced ECC flexural members subjected to various cyclic deformation histories
Dong, Mansheng / Hao, Yanhai / Zhang, Chao / Li, Linglin	Failure mechanism analysis of asphalt–aggregate systems subjected to direct shear loading
Khoury, Eliane / Cazacliu, Bogdan / Remond, Sébastien	Impact of the initial moisture level and pre-wetting history of recycled concrete aggregates on their water absorption
Ouyang, Xiaowei / Koleva, D. A. / Ye, Guang / van Breugel, K.	Insights into the mechanisms of nucleation and growth of C–S–H on fillers
Wang, Licheng / Bao, Jiuwen	Investigation on chloride penetration into unsaturated concrete under short-term sustained tensile loading
Chen, Jun / Tang, Tao / Zhang, Yuqing	Laboratory characterization of directional dependence of permeability for porous asphalt mixtures
Liu, Ya / Xi, Zhonghua / Cai, Jun / Xie, Hongfeng	Laboratory investigation of the properties of epoxy asphalt rubber (EAR)
Qiu, Xin / Xiao, Shanglin / Yang, Qing / Wang, Yujie / Wang, Feng	Meso-scale analysis on shear failure characteristics of asphalt–aggregate interface
Dhanasekar, M. / Thamboo, J. A. / Nazir, S.	On the in-plane shear response of the high bond strength concrete masonry walls
Yuan, B. / Yu, Q. L. / Brouwers, H. J. H.	Phase modification induced drying shrinkage reduction on Na2CO3 activated slag by incorporating Na2SO4
Hoque, Nusrat / Shukri, Ahmad Azim / Jumaat, Mohd. Zamin	Prediction of IC debonding failure of precracked FRP strengthened RC beams using global energy balance
Chen, Conglin / Podolsky, Joseph H. / Hernández, Nacú B. / Hohmann, Austin D. / Williams, R. Christopher / Cochran, Eric W.	Preliminary investigation of bioadvantaged polymers as sustainable alternatives to petroleum-derived polymers for asphalt modification
Ioannou, Ioannis / Charalambous, Cleopatra / Hall, Christopher	The temperature variation of the water sorptivity of construction materials
Franzoni, Elisa / Leemann, Andreas / Griffa, Michele / Lura, Pietro	The " Terranova" render of the Engineering Faculty in Bologna (1931–1935): reasons for an outstanding durability
Pinel, A. / Jorand, Y. / Olagnon, C. / Charlot, A. / Fleury, E.	Towards poured earth construction mimicking cement solidification: demonstration of feasibility via a biosourced polymer

Author(s)

Title

Page(s)

Boccadoro, Lorenzo / Steiger, René / Zweidler, Simon / Frangi, Andrea

Analysis of shear transfer and gap opening in timber–concrete composite members with notched connections

Botas, Sandro / Veiga, Rosário / Velosa, Ana

Bond strength in mortar/ceramic tile interface—testing procedure and adequacy evaluation

Gaurav, Govind / Singh, Bhupinder

Bond strength prediction of tension lap splice for deformed steel bars in recycled aggregate concrete

Medina, J. M. / Sáez del Bosque, I. F. / Frías, M. / Sánchez de Rojas, M. I. / Medina, C.

Characterisation and valorisation of biomass waste as a possible addition in eco-cement design

O'Flaherty, Fin / Lambert, Paul / Mangat, Pal / Starinieri, Vincenzo