Materials and Structures - v. 50, n. 3 (June 2017)

Published:	June 2017

Author(s)	Title	Page(s)
Boz, Ilker / Tavassoti-Kheiry, Pezhouhan / Solaimanian, Mansour	The advantages of using impact resonance test in dynamic modulus master curve construction through the abbreviated test protocol
Faleschini, Flora / Santamaria, Amaia / Zanini, Mariano Angelo / San José, José-Tomás / Pellegrino, Carlo	Bond between steel reinforcement bars and Electric Arc Furnace slag concrete
Villagrán-Zaccardi, Y. A. / Egüez-Alava, H. / De Buysser, K. / Gruyaert, E. / De Belie, N.	Calibrated quantitative thermogravimetric analysis for the determination of portlandite and calcite content in hydrated cementitious systems
Starck, S. / Beushausen, H. / Alexander, M. / Torrent, R.	Complementarity of in situ and laboratory-based concrete permeability measurements
Li, Ning / Shi, Caijun / Wang, Qing / Zhang, Zuhua / Ou, Zhihua	Composition design and performance of alkali-activated cements
Ghantous, Rita Maria / Poyet, Stéphane / L'Hostis, Valérie / Tran, Nhu-Cuong / François, Raoul	Effect of accelerated carbonation conditions on the characterization of load-induced damage in reinforced concrete members
Zhang, Wenyan / Na, Seunghyun / Kim, Junho / Choi, Hyeonggil / Hama, Yukio	Evaluation of the combined deterioration by freeze–thaw and carbonation of mortar incorporating BFS, limestone powder and calcium sulfate
Marchi, Luca / Scotta, Roberto / Pozza, Luca	Experimental and theoretical evaluation of TCC connections with inclined self-tapping screws
Diotallevi, Pier Paolo / Landi, Luca / Guiduzzi, Marco	Experimental tests of RC beams strengthened with composite materials using IPN water-based resins
Arends, T. / Pel, L. / Huinink, H. P.	Hygromorphic response dynamics of oak: towards accelerated material characterization
Yang, Xu / Sun, Zhenping / Yang, Haijing / Ji, Yanliang / Jiang, Xiaoxing / Chen, Chao / Setzer, Max J.	Identification of hydration stage of calcium sulfoaluminate cement at an early age with helium pycnometry
Feijoo, Jorge / Ottosen, L. M. / Nóvoa, X. R. / Rivas, Teresa / de Rosario, Iván	An improved electrokinetic method to consolidate porous materials
Miljković, Miomir / Radenberg, Martin / Fang, Xing / Lura, Pietro	Influence of emulsifier content on cement hydration and mechanical performance of bitumen emulsion mortar
Bernard, E. S. / Xu, G. G.	Influence of fibre count on variability in post-crack performance of fibre reinforced concrete
Wang, Qiang / Yang, Jun / Chen, Honghui	Long-term properties of concrete containing limestone powder
Bentz, Dale P. / Stutzman, Paul E. / Zunino, Franco	Low-temperature curing strength enhancement in cement-based materials containing limestone powder
Makowska, Michalina / Hartikainen, Ari / Pellinen, Terhi	The oxidation of bitumen witnessed in-situ by infrared spectroscopy
Ghannoum, Maria / Baroth, Julien / Rospars, Claude / Millard, Alain	Prediction of the size effect in concrete structures using an analytical approach to the weakest link and localization method (WL2)
Baykara, Haci / Cornejo, Mauricio H. / Murillo, Roberto / Gavilanes, Andrea / Paredes, Cecilia / Elsen, Jan	Preparation, characterization and reaction kinetics of green cement: Ecuadorian natural mordenite-based geopolymers
Amziane, Sofiane / Collet, Florence / Lawrence, Mike / Magniont, Camille / Picandet, vincent / Sonebi, Mohammed	Recommendation of the RILEM TC 236-BBM: characterisation testing of hemp shiv to determine the initial water content, water absorption, dry density, particle size distribution and thermal conductivity
Dobruský, Svatopluk	Reliability-based code calibration applied to thin elements made of UHPFRC
Hofko, Bernhard / Alavi, Mohammad Zia / Grothe, Hinrich / Jones, David / Harvey, John	Repeatability and sensitivity of FTIR ATR spectral analysis methods for bituminous binders
Sabau, C. / Gonzalez-Libreros, J. H. / Sneed, L. H. / Sas, G. / Pellegrino, C. / Täljsten, B.	Use of image correlation system to study the bond behavior of FRCM-concrete joints

Author(s)

Title

Page(s)

Boz, Ilker / Tavassoti-Kheiry, Pezhouhan / Solaimanian, Mansour

The advantages of using impact resonance test in dynamic modulus master curve construction through the abbreviated test protocol

Faleschini, Flora / Santamaria, Amaia / Zanini, Mariano Angelo / San José, José-Tomás / Pellegrino, Carlo

Bond between steel reinforcement bars and Electric Arc Furnace slag concrete

Villagrán-Zaccardi, Y. A. / Egüez-Alava, H. / De Buysser, K. / Gruyaert, E. / De Belie, N.

Calibrated quantitative thermogravimetric analysis for the determination of portlandite and calcite content in hydrated cementitious systems

Starck, S. / Beushausen, H. / Alexander, M. / Torrent, R.

Complementarity of in situ and laboratory-based concrete permeability measurements

Li, Ning / Shi, Caijun / Wang, Qing / Zhang, Zuhua / Ou, Zhihua

Composition design and performance of alkali-activated cements

Ghantous, Rita Maria / Poyet, Stéphane / L'Hostis, Valérie / Tran, Nhu-Cuong / François, Raoul

Effect of accelerated carbonation conditions on the characterization of load-induced damage in reinforced concrete members

Zhang, Wenyan / Na, Seunghyun / Kim, Junho / Choi, Hyeonggil / Hama, Yukio

Evaluation of the combined deterioration by freeze–thaw and carbonation of mortar incorporating BFS, limestone powder and calcium sulfate

Marchi, Luca / Scotta, Roberto / Pozza, Luca

Experimental and theoretical evaluation of TCC connections with inclined self-tapping screws

Diotallevi, Pier Paolo / Landi, Luca / Guiduzzi, Marco

Experimental tests of RC beams strengthened with composite materials using IPN water-based resins

Arends, T. / Pel, L. / Huinink, H. P.

Hygromorphic response dynamics of oak: towards accelerated material characterization

Yang, Xu / Sun, Zhenping / Yang, Haijing / Ji, Yanliang / Jiang, Xiaoxing / Chen, Chao / Setzer, Max J.

Identification of hydration stage of calcium sulfoaluminate cement at an early age with helium pycnometry

Feijoo, Jorge / Ottosen, L. M. / Nóvoa, X. R. / Rivas, Teresa / de Rosario, Iván

An improved electrokinetic method to consolidate porous materials

Miljković, Miomir / Radenberg, Martin / Fang, Xing / Lura, Pietro

Influence of emulsifier content on cement hydration and mechanical performance of bitumen emulsion mortar

Bernard, E. S. / Xu, G. G.

Influence of fibre count on variability in post-crack performance of fibre reinforced concrete

Wang, Qiang / Yang, Jun / Chen, Honghui

Long-term properties of concrete containing limestone powder

Bentz, Dale P. / Stutzman, Paul E. / Zunino, Franco

Low-temperature curing strength enhancement in cement-based materials containing limestone powder

Makowska, Michalina / Hartikainen, Ari / Pellinen, Terhi

The oxidation of bitumen witnessed in-situ by infrared spectroscopy

Ghannoum, Maria / Baroth, Julien / Rospars, Claude / Millard, Alain

Prediction of the size effect in concrete structures using an analytical approach to the weakest link and localization method (WL2)

Baykara, Haci / Cornejo, Mauricio H. / Murillo, Roberto / Gavilanes, Andrea / Paredes, Cecilia / Elsen, Jan

Preparation, characterization and reaction kinetics of green cement: Ecuadorian natural mordenite-based geopolymers

Amziane, Sofiane / Collet, Florence / Lawrence, Mike / Magniont, Camille / Picandet, vincent / Sonebi, Mohammed

Recommendation of the RILEM TC 236-BBM: characterisation testing of hemp shiv to determine the initial water content, water absorption, dry density, particle size distribution and thermal conductivity

Dobruský, Svatopluk

Reliability-based code calibration applied to thin elements made of UHPFRC

Hofko, Bernhard / Alavi, Mohammad Zia / Grothe, Hinrich / Jones, David / Harvey, John

Repeatability and sensitivity of FTIR ATR spectral analysis methods for bituminous binders

Sabau, C. / Gonzalez-Libreros, J. H. / Sneed, L. H. / Sas, G. / Pellegrino, C. / Täljsten, B.

Use of image correlation system to study the bond behavior of FRCM-concrete joints

Advertisement

Materials and Structures - v. 50, n. 3 (June 2017)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Materials and Structures - v. 50, n. 3 (June 2017)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.