Journal of Building Engineering - May 2022

Published:	May 2022

Articles in this Issue

Author(s)	Title	Page(s)
Liu, Peng-Fei / Li, Chao / Li, Hong-Nan / Li, Gang / Zhang, Hao	Airbag loading test and numerical simulation on out-of-plane mechanical behavior of a cast-in-situ composite wall with MTPC	103985
Gálvez, Miguel A. / Gil, Tomas / Barraza, Rodrigo / Kapstein, Paula	Analysis of the influence of the position of the reflective layer on the thermal performance of a multi-layer lightweight wall panel	103849
Pelletier, Kate / Calautit, John	Analysis of the performance of an integrated multistage helical coil heat transfer device and passive cooling windcatcher for buildings in hot climates	103899
Siti Syazwani, N. / Ervina Efzan, M. N. / Kok, C. K. / Nurhidayatullaili, M. J.	Analysis on extracted jute cellulose nanofibers by fourier transform infrared and X-Ray diffraction	103744
İpek, Süleyman / Güneyisi, Esra Mete	Application of Eurocode 4 design provisions and development of new predictive models for eccentrically loaded CFST elliptical columns	103945
Kizinievič, Olga / Kizinievič, Viktor / Trambitski, Yahor / Voisniene, Violeta	Application of paper sludge and clay in manufacture of composite materials: Properties and biological susceptibility	104003
Zhang, Yuzhuo / Xu, Qian / Wang, Qinghe / Zhou, Mei / Liu, Haiqing / Guo, Haiyang	Axial compressive behavior of circular concrete-filled steel tube stub columns prepared with spontaneous-combustion coal gangue aggregate	103987
Zhang, Xiaochen / Wu, Xiangguo / Zhang, Dong / Huang, Qingwei / Chen, Baochun	Axial compressive behaviors of reinforced concrete composite column with precast ultra-high performance concrete (UHPC) jacket	103956
Scorpio, Michelangelo / Laffi, Roberta / Teimoorzadeh, Ainoor / Ciampi, Giovanni / Masullo, Massimiliano / Sibilio, Sergio	A calibration methodology for light sources aimed at using immersive virtual reality game engine as a tool for lighting design in buildings	103998
Abu-Hamdeh, Nidal H. / Alsulami, Radi A. / Hatamleh, Randa I.	A case study in the field of building sustainability energy: Performance enhancement of solar air heater equipped with PCM: A trade-off between energy consumption and absorbed energy	103903
Navaratnam, Satheeskumar / Satheeskumar, Aarani / Zhang, Guomin / Nguyen, Kate / Venkatesan, Srikanth / Poologanathan, Keerthan	The challenges confronting the growth of sustainable prefabricated building construction in Australia: Construction industry views	103935
Yamada, Satoshi / Ishida, Takanori	Collapse behavior of weak column type steel moment resisting frames built with square hollow section columns subjected to bi-directional horizontal ground motion	103960
Kamari, Aliakbar / Schultz, Carl Peter Leslie	A combined principal component analysis and clustering approach for exploring enormous renovation design spaces	103971
Hwang, Hee-Young / Kwon, Yang-Hee / Hong, Sung-Gul / Kang, Sung-Hoon	Comparative study of effects of natural organic additives and cellulose ether on properties of lime-clay mortars	103972
Cheng, Gensheng / Li, Haitao / Li, Hang / Ashraf, Mahmud	Compression resistance of short LBL columns with local damage after retrofitting using basalt fiber reinforced polymer	103941
Xu, Feiyang / Xuan, Shiqing / Li, Wei / Meng, Xinmiao / Gao, Ying	Compressive performance of steel-timber composite L-shaped columns under concentric loading	103967
Elshahawi, Mahmoud / Hückler, Alex / Schlaich, Mike	Constitutive relations and finite element modelling of Infra Lightweight Concrete (ILC)	103869
Alsanat, Husam / Gunalan, Shanmuganathan / Gatheeshgar, Perampalam / Poologanathan, Keerthan / Thabet, Ahmed Mostafa	Design of roll-formed aluminium lipped channel sections with web opening subjected to web crippling under end-two-flange load case	103887
Hu, Baolin / Min, Yujun / Wang, Changhong / Xu, Qing / Keleta, Yonas	Design, analysis and application of the double-stage yield buckling restrained brace	103980
Khdair, Adnan I. / Abu Rumman, Ghaida / Basha, Muhammad	Developing building enhanced with PCM to reduce energy consumption	103923
Xu, Renze / Qian, Bosen / Wu, Fan / Li, Xueliang / Zhang, Guoliang / Wang, Luhai	Dispersion of evaporating droplets in the passenger compartment of high-speed train	104001
Xiao, Qiyuan / Long, Guangcheng / Feng, Ruiping / Zeng, Xiaohui / Dong, Rongzhen / Xiang, Yu / Yang, Kai	Effect of alternating current field on rheology of fresh cement-based pastes	103771
Sakcalı, Gökhan Barış / Ozturk, Yusuf / Celik, Ilyas Devran / Davraz, Metin	The effect of new generation polyurethane wall block on single span steel frame behavior	103986
Bayraktar, Oguzhan Yavuz / Kaplan, Gökhan / Benli, Ahmet	The effect of recycled fine aggregates treated as washed, less washed and unwashed on the mechanical and durability characteristics of concrete under MgSO4 and freeze-thaw cycles	103924
Alqaed, Saeed	The effect of using phase change material in the natural ventilation duct of a building on temperature uniformity at different hours of the day	103974
Lyu, Weihua / Wang, Zhichao / Li, Xiaofeng / Xin, Xiaodong / Chen, Shengpeng / Yang, Yingxia / Xu, Zhaowei / Yang, Qiang / Li, Hao	Energy efficiency and economic analysis of utilizing magnetic bearing chillers for the cooling of data centers	103920
McDonald, Lewis J. / Afzal, Waheed / Glasser, Fredrik P.	Evidence of scawtite and tilleyite formation at ambient conditions in hydrated Portland cement blended with freshly-precipitated nano-size calcium carbonate to reduce greenhouse gas emissions	103906
Bian, Jinliang / Cao, Wanlin / Qiao, Qiyun / Zhang, Jianwei	Experimental and numerical studies of prefabricated structures using CFST frame and composite wall	103886
Liu, Zhenzhen / Lu, Yiyan / Li, Na / Zong, Shuai	Experimental investigation and computational simulation of slender self-stressing concrete-filled steel tube columns	103893
Abbasnejadfard, Mostafa / Bastami, Morteza / Hashemi, Seyed-Abdolreza	Experimental investigation on the stress-strain behavior of unsaturated polyester polymer concrete subjected to monotonic and cyclic loadings	103966
Chen, Hongyu / Zhu, Hongguang / Liu, Yan / Chen, Zhiyi / Yang, Yaowen	Experimental study on the effect of column lateral friction torque on seismic performance of IMS structure middle joints	103983
Wang, Yan / Tahmasebi, Farhang / Cooper, Elizabeth / Stamp, Samuel / Chalabi, Zaid / Burman, Esfandiar / Mumovic, Dejan	Exploring the relationship between window operation behavior and thermal and air quality factors: A case study of UK residential buildings	103997
Madkour, Hany / Maher, Marwa / Ali, Osama	Finite element analysis for interior slab-column connections reinforced with GFRP bars using damage plasticity model	104013
Rahnavard, Rohola / Craveiro, Hélder D. / Simões, Rui A. / Laím, Luís / Santiago, Aldina	Fire resistance of concrete-filled cold-formed steel (CF-CFS) built-up short columns	103854
Sifan, Mohamed / Gatheeshgar, Perampalam / Navaratnam, Satheeskumar / Nagaratnam, Brabha / Poologanathan, Keerthan / Thamboo, Julian / Suntharalingam, Thadshajini	Flexural behaviour and design of hollow flange cold-formed steel beam filled with lightweight normal and lightweight high strength concrete	103878
Li, Xiulin / Wen, Weiping / Zhai, Changhai	A framework for the lifecycle cost assessment of structures considering multiple mainshock-aftershock sequences	103940
Tang, Zhenyun / Dong, Yue / Liu, Hao / Li, Zhenbao	Frequency domain analysis method of TLD controlled MDOFs system subject to earthquake excitation	103910
Dong, J. F. / Wang, Q. Y. / Guan, Z. W. / Chai, H. K.	High-temperature behaviour of basalt fibre reinforced concrete made with recycled aggregates from earthquake waste	103895
do Amaral, Leo Maia / Rodrigues, Conrado de Souza / Poggiali, Flávia Spitale Jacques	Hornification on vegetable fibers to improve fiber-cement composites: A critical review	103947
Gutland, Michael / Bucking, Scott / Quintero, Mario Santana	Hygrothermal modelling of historic rubble masonry walls: Accounting for geometric and compositional variability	103929
Alzaza, Ahmad / Ohenoja, Katja / Illikainen, Mirja	Improved strength development and frost resistance of Portland cement ground-granulated blast furnace slag binary binder cured at 0 °C with the addition of calcium silicate hydrate seeds	103904
Purev, Uelun-Ujin / Hagishima, Aya / Buyan, Munkhbayar	Indoor thermal environment of Mongolian traditional mobile housing used as urban habitat in winter	103927
Zhu, Ruizhao / Guo, Tong / Tesfamariam, Solomon	Inelastic displacement demand for non‐degrading bilinear SDOF oscillators with self-centering viscous-hysteretic devices	104010
Yang, Zhengxian / Shi, Peng / Zhang, Yong / Li, Zhenming	Influence of liquid-binder ratio on the performance of alkali-activated slag mortar with superabsorbent polymer	103934
Hwang, Sangchul / Ozbakkaloglu, Togay / Kazmi, Syed Minhaj Saleem / Munir, Muhammad Junaid	Influence of off-spec fly ash and surfactant-coated nano-iron-oxide on the fresh and hardened properties of cement pastes: An exploratory study	103976
Kan, Ankang / Zheng, Ni / Zhu, Wenbing / Cao, Dan / Wang, Wei	Innovation and development of vacuum insulation panels in China: A state-of-the-art review	103937
Hatamleh, Randa I. / Abu-Hamdeh, Nidal H. / Bantan, Rashad A. R.	Integration of a solar air heater to a building equipped with PCM to reduce the energy demand	103948
Tang, Hao / Ding, Yong / Liu, Xue / Singer, Brett C.	Investigating the influence of environmental information on perceived indoor environmental quality: An exploratory study	103933
Borah, Bonisha / Kaushik, Hemant B. / Singhal, Vaibhav	Lateral load-deformation models for seismic analysis and performance-based design of confined masonry walls	103978
Bazli, Milad / Heitzmann, Michael / Ashrafi, Hamed	Long-span timber flooring systems: A systematic review from structural performance and design considerations to constructability and sustainability aspects	103981
Mohammadi, Behzad / Ershad-Langroudi, Amir / Moradi, Gholamreza / Safaiyan, Abdolrasoul / Habibi, Peymaneh	Mechanical and sound absorption properties of open-cell polyurethane foams modiﬁed with rock wool fiber	103872
Xiong, Ming-Xiang / Pi, Peng-Wei / Gong, Wei / Yang, Min-Feng / Ou, Zheng-Feng	Mechanical properties of TMCP high strength steels with different strength grades at elevated temperatures	103874
Çavdar, Ayfer D. / Yel, Husnu / Torun, Sevda B.	Microcrystalline cellulose addition effects on the properties of wood cement boards	103975
Feng, Wanhui / Tang, Yunchao / He, Weiming / Wei, Wenbo / Yang, Yongmin	Mode Ⅰ dynamic fracture toughness of rubberised concrete using a drop hammer device and split Hopkinson pressure bar	103995
Yan, Bowen / Ma, Chenyan / Yuan, Yangjin / Dong, Zhichao / Huang, Hanjie / Wang, Zhisong	Modeling of downburst outflows and wind pressures on a high-rise building under different terrain conditions	103738
Li, Yaqiang / Li, Yue / Li, Hongwen	Multi-scale investigation of creep properties of potassium magnesium phosphate cement	103949
Santa Cruz Astorqui, J. / Amores, C. Porras / Ramírez, C. Piña / Del Río Merino, M. / Sáez, P. Villoria / Barriguete, A. Vidales	New execution process of a panel-based façade system that reduces project duration and improves workers' working conditions	103894
Wu, Tao / Sun, Ying / Cao, Zhenggang / Chen, Yang	A new recommended load cycle for dynamic wind-resistant test of roof system based on the principle of damage equivalence	103911
Gelis, Kadir / Ozbek, Kadir / Celik, Ali Naci / Ozyurt, Omer	A novel cooler block design for photovoltaic thermal systems and performance evaluation using factorial design	103928
Li, Xuanzhi / Xue, Suduo / Liu, Yue	A novel form finding method for minimum surface of cable net	103939
Hosseinnia, Seyed Mojtaba / Sorin, Mikhail	Numerical approach for sizing vertical ground heat exchangers based on constant design load and desired outlet temperature	103932
Djerouni, Salah / Elias, Said / Abdeddaim, Mahdi / Rupakhety, Rajesh	Optimal design and performance assessment of multiple tuned mass damper inerters to mitigate seismic pounding of adjacent buildings	103994
Kim, SeongHun / Kwak, Hyo-Gyoung	Optimization of an RC frame structure based on a plastic analysis and direct search of a section database	103959
Cao, Xu-Yang / Feng, De-Cheng / Wang, Zhun / Wu, Gang	Parametric investigation of the assembled bolt-connected buckling-restrained brace and performance evaluation of its application into structural retrofit	103988
Shi, Wenchao / Min, Yunran / Ma, Xiaochen / Chen, Yi / Yang, Hongxing	Performance evaluation of a novel plate-type porous indirect evaporative cooling system: An experimental study	103898
Fares, Galal / Al-Negheimish, Abdulaziz / Alhozaimy, Abdulrahman M. / Khan, M. Iqbal	Polycarboxylate superplasticizer and viscosity modifying agent: Mode of addition and its effect on cement paste rheology using image analysis	103946
Benaicha, Mouhcine / Jalbaud, Olivier / Alaoui, Adil Hafidi / Burtschell, Yves	Porosity effects on rheological and mechanical behavior of self-compacting concrete	103964
Brown, Tristen / Elshaer, Ahmed	Pounding of structures at proximity: A state-of-the-art review	103991
Ren, Chen / Cao, Shi-Jie / Haghighat, Fariborz	A practical approach for preventing dispersion of infection disease in naturally ventilated room	103921
Kasinikota, Pardhasaradhi / Tripura, Deb Dulal	Prediction of physical-mechanical properties of hollow interlocking compressed unstabilized and stabilized earth blocks at different moisture conditions using ultrasonic pulse velocity	103961
Ding, Zihao / Zheng, Shixiong / Yu, Bo	Probabilistic prediction and calibration for residual shear strength of corroded reinforced concrete columns	103901
Peng, Jiahao / Hou, Chao / Shen, Luming	Progressive collapse analysis of corner-supported composite modular buildings	103977
Wang, Zefang / Yan, Jiachuan / Lin, Youzhu / Fan, Feng	Punching shear performance of steel-fiber reinforced concrete-steel sandwich plates under different patch loading heads	103955
Zhang, Hexing / Lu, Kunpeng / Zhang, Wuzhou / Li, Dalang / Yang, Genlan	Quantification and acoustic emission characteristics of sandstone damage evolution under dry–wet cycles	103996
Chu, Duc Chinh / Kleib, Joelle / Amar, Mouhamadou / Benzerzour, Mahfoud / Abriak, Nor-Edine	Recycling of dredged sediment as a raw material for the manufacture of Portland cement – Numerical modeling of the hydration of synthesized cement using the CEMHYD3D code	103871
Murad, Yasmin Zuhair	Retrofitting heat-damaged non-ductile RC beam-to-column joints subjected to cyclic and axial loading with FRCM composites	103952
Mirzai, Nadia M. / Jeong, Seong-Hoon / Hu, Jong Wan	Seismic collapse behavior of steel structures with a smart axial polyurethane friction damper	103839
Ke, Ke / Zhou, Xuhong / Zhu, Min / Yam, Michael C. H. / Wang, Yuhang / Zhang, Huanyang	Seismic evaluation of industrial steel moment resisting frames with shape memory alloys using performance-spectra-based method	103950
Khansefid, Ali / Yadollahi, Seyed Mahmoudreza / Müller, Gerhard / Taddei, Francesca / Kumawat, Aditi	Seismic performance assessment of a masonry building under earthquakes induced by geothermal power plants operation	103909
Xue, Jianyang / Yuan, Zhen / Ren, Guoqi / Qi, Liangjie / Zhang, Wei / Wei, Jinghui	Seismic performance of glued-laminated wood frame and frame brace structure: Experimental and finite element analysis	103944
Zhang, Jianxin / Pei, Zonghu / Rong, Xian	Seismic performance of HSS reinforced interior beam-column joints with high-strength steel fiber concrete and enhanced reinforcements	103958
Sun, Zeyang / Chen, Youjun / Xu, Shi-Yu / Sun, Yunlou / Wu, Gang	Shaking table test of concrete columns hybrid reinforced by steel/FRP bars	103938
Kay, Raphael / Nitièma, Kevin / Katrycz, Charlie / Jakubiec, J. Alstan / Hoban, Nicholas / Hatton, Benjamin D.	Shape-programmable fluid bubbles for responsive building skins	103942
Pan, Zuanfeng / Zheng, Wei / Xiao, Jianzhuang / Chen, Zongping / Chen, Yuliang / Xu, Jinjun	Shear behavior of steel reinforced recycled aggregate concrete beams after exposure to elevated temperatures	103953
Sun, Xiaoyan / Ye, Boxing / Lin, Kangjian / Wang, Hailong	Shear performance of 3D printed concrete reinforced with flexible or rigid materials based on direct shear test	103860
Li, Ruizhe / Deng, Mingke / Zhang, Yangxi / Wei, Ding	Shear strengthening of reinforced concrete deep beams with highly ductile fiber-reinforced concrete jacket	103957
Shan, Zhiwei / Chen, Lijie / Wang, Qisheng / Wu, Hui / Gao, Boqing	Simplified quadrilateral grid generation of complex free-form gridshells by surface fitting	103827
Li, Shengli / Wang, Hongran / Liu, Xin / Guo, Pan / Wang, Xidong / Chu, Yajie	Simulation of wind profile in coastal areas by using a structural wind-resistant moving vehicle tester: CFD and experimental investigations	103951
Abdelaal, Fatma / Guo, Brian H. W.	Stakeholders’ perspectives on BIM and LCA for green buildings	103931
Wang, Huajie / Yang, Haibo / Qian, Hongliang / Chen, Deshen / He, Yuan / Fan, Feng	Static experimental analysis and optimization of innovative pre-engineered tubular section beam-column connections in cold-form steel frames	103989
Mishra, Mayank / Lourenço, Paulo B. / Ramana, G. V.	Structural health monitoring of civil engineering structures by using the internet of things: A review	103954
Wasim, Muhammad / Oliveira, Osmar / Ngo, Tuan Duc	Structural performance of prefabricated glass fibre concrete floor panel versus compressed fibre cement floor panel for an optimised volumetric module- A case study	103819
El-Said, Emad M. S. / Hegazi, A. A. / Awad, A. M.	Study of heat and mass transfer through a porous carbon tube as a humidification media for evaporative cooling system with swirl flow	103926
Liu, Tingzhang / Jin, Linyi / Zhong, Chujun / Xue, Fan	Study of thermal sensation prediction model based on support vector classification (SVC) algorithm with data preprocessing	103919
Chen, Bingjiang / Pang, Lufeng / Zhou, Zaibo / Chang, Qingshan / Fu, Peng	Study on the activation mechanism and hydration properties of gold tailings activated by mechanical-chemical-thermal coupling	104014
Song, Yanli / Chen, Xin / Zhang, Zhao / Cao, Shi / Du, Tao / Guo, Haifeng	Study on the control of kitchen pollutants by exhaust hood with air-filled slots	103891
García-Lodeiro, I. / Gonzalez-Aguza, S. / Zarzuela, R. / Pardos, Y. / Garcia-Navarro, R. / Tébar, A. / Mosquera, M. J. / Blanco-Varela, M. T.	Studying the dosage-dependent influence of hydrophobic alkoxysilane/siloxane admixtures on the performance of repair micromortars	103905
Zaker Esteghamati, Mohsen / Sharifnia, Houri / Ton, Diep / Asiatico, Patricia / Reichard, Georg / Flint, Madeleine M.	Sustainable early design exploration of mid-rise office buildings with different subsystems using comparative life cycle assessment	104004
Pan, Junzheng / He, Jianming / Zhu, Ji / Gao, Xiaojian	Theoretical and experimental study on the electrical resistivity method for evaluating fresh concrete segregation	103943
Aghasizadeh, Sara / Kari, Behrouz Mohammad / Fayaz, Rima	Thermal performance of balcony thermal bridge solutions in reinforced concrete and steel frame structures	103984
Li, Jin / Wang, Wei / Jin, Hongyu / Li, Yushen / Bu, Nan	Thermal responses of people exhibiting high metabolic rates when exercising in piloti spaces in hot and humid areas	103930
Wang, Huafei / Gu, Qiang / Qi, Yi	Thickness demand for concrete panel in design of C-PSW/CE under cyclic loading	104011
Zhou, Ji / Chen, Zongping / Chen, Yuliang / Song, Chunmei / Li, Junya / Zhong, Ming	Torsional behavior of steel reinforced concrete beam with welded studs: Experimental investigation	103879
Abdel-Gawwad, Hamdy A. / Khalil, Khalil A. / Gouda, Ayman A. / Elkhoresy, Abdelrahman H. / Arif, Mohammed A.	Understanding the effect of hydrozincite and witherite nanominerals on the performance and phase composition of alkali-activated slag	103963
Tanks, Jonathon / Naito, Kimiyoshi	UV durability assessment of a thermoplastic epoxy-based hybrid composite rod for structural reinforcement and retrofitting	103922
Kannan, Uthradevi / Gafoor, Shibil Abdul / Srivastava, Sonali / Nithyadharan, M. / Gupta, Soujit Sen / Maliyekkal, Shihabudheen M.	A waste-derived nanocomposite sealant for repairing micro-cracks in concrete	103965

About this
data sheet
IssueID
60331
Published on:
06/01/2022
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Journal of Building Engineering - May 2022

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Journal of Building Engineering - May 2022

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.