Journal of Building Engineering - November 2020

Published:	November 2020

Articles in this Issue

Author(s)	Title	Page(s)
Tramontin Souza, Marcelo / Ferreira, Igor Maia / Guzi de Moraes, Elisângela / Senff, Luciano / Novaes de Oliveira, Antonio Pedro	3D printed concrete for large-scale buildings: An overview of rheology, printing parameters, chemical admixtures, reinforcements, and economic and environmental prospects	101833
Xiao, Jianzhuang / Zou, Shuai / Yu, Ying / Wang, Yu / Ding, Tao / Zhu, Ying / Yu, Jiangtao / Li, Shuaishuai / Duan, Zhenhua / Wu, Yuching / Li, Lingzhi	3D recycled mortar printing: System development, process design, material properties and on-site printing	101779
Proença, M. / Neves e Sousa, A. / Garrido, M. / Correia, J. R.	Acoustic performance of composite sandwich panels for building floors: Experimental tests and numerical-analytical simulation	101751
Mazar, Mohammad M. / Rezaeizadeh, Amin	Adaptive model predictive climate control of multi-unit buildings using weather forecast data	101449
Santarsiero, Giuseppe / Masi, Angelo	Analysis of slab action on the seismic behavior of external RC beam-column joints	101608
Mortezagholi, Mohamad Hosein / Zahrai, Seyed Mehdi	Analytical and numerical studies on reducing lateral restraints in conventional & all steel Buckling Restrained Braces	101513
Huang, Lin / Deng, Lianhua / Li, Angui / Gao, Ran / Zhang, Linhua / Lei, Wenjun	Analytical model for solar radiation transmitting the curved transparent surface of solar greenhouse	101785
Ju, Hyunjin / Han, Sun-Jin / Kim, Kang Su	Analytical model for torsional behavior of RC members combined with bending, shear, and axial loads	101730
Bahgat, Ruwaa / Reffat, Rabee M. / Elkady, Shawkat L.	Analyzing the impact of design configurations of urban features on reducing solar radiation	101664
Lim, Hansol / Kang, Yong-Kwon / Jeong, Jae-Weon	Application of a phase change material to a thermoelectric ceiling radiant cooling panel as a heat storage layer	101787
Kaleta-Jurowska, Alina / Grzeszczyk, Stefania / Dziubiński, Marek	Application of multiple step change in shear rate model for determination of thixotropic behaviour of cement pastes	101494
Wasim, Muhammad / Han, Thomas Michael / Huang, Haoran / Madiyev, Miras / Ngo, Tuan Duc	An approach for sustainable, cost-effective and optimised material design for the prefabricated non-structural components of residential buildings	101474
Noorifard, Azadeh / Tabeshpour, Mohammad Reza / Mehdizadeh Saradj, Fatemeh	An approximate method to identify torsion caused by infill walls through geometric specifications of architectural plans	101799
Cucca, Giorgio / Ianakiev, Anton	Assessment and optimisation of energy consumption in building communities using an innovative co-simulation tool	101681
Aygörmez, Yurdakul / Canpolat, Orhan / Al-mashhadani, Mukhallad M.	Assessment of geopolymer composites durability at one year age	101453
Sibenik, Goran / Kovacic, Iva	Assessment of model-based data exchange between architectural design and structural analysis	101589
Phap, Vu Minh / Thu Huong, Nguyen Thi / Hanh, Pham Thi / Van Duy, Pham / Van Binh, Doan	Assessment of rooftop solar power technical potential in Hanoi city, Vietnam	101528
Yang, Xincong / Yu, Yantao / Shirowzhan, Sara / Sepasgozer, Samad / Li, Heng	Automated PPE-Tool pair check system for construction 2 safety using smart IoT	101721
Ding, Beidou / Liu, Jinling / Huang, Zhenhua / Li, Xian / Wu, Xiaosuo / Cai, Liping	Axial force identification of space grid structural members using particle swarm optimization method	101674
Cao, Shi / Wu, Chengqing / Wang, Weiqiang	Behavior of FRP confined UHPFRC-filled steel tube columns under axial compressive loading	101511
Dey, Tanish / Das, Chandra Sekhar / Mishra, Naval	Behaviour of confined recycled aggregate concrete under compressive loading: An experimental investigation	101825
Rashwan, M. A. / Al Basiony, T. M. / Mashaly, A. O. / Khalil, M. M.	Behaviour of fresh and hardened concrete incorporating marble and granite sludge as cement replacement	101697
Tobbala, D. E. / Abdelsalam, Bassam Abdelsalam / Agwa, Ibrahim Saad	Bond performance of a hybrid coating zinc-rich epoxy incorporating nano-ferrite for steel rebars subjected to high temperatures in concrete	101698
Tariq, Faraz / Bhargava, Pradeep	Bond-slip models for super ductile TMT bars with normal strength concrete exposed to elevated temperatures	101585
Mirski, Radosław / Dukarska, Dorota / Derkowski, Adam / Czarnecki, Rafał / Dziurka, Dorota	By-products of sawmill industry as raw materials for manufacture of chip-sawdust boards	101460
Pelliccia, Giulia / Baldinelli, Giorgio / Bianconi, Fabio / Filippucci, Marco / Fioravanti, Marco / Goli, Giacomo / Rotili, Antonella / Togni, Marco	Characterisation of wood hygromorphic panels for relative humidity passive control	101829
Hafez, Azza I. / Khedr, Maaly M. A. / Osman, Randa M. / Sabry, Rania / Mohammed, Mona S.	A Comparative Investigation of the Unit Cost for the Preparation of Modified Sand and Clay Bricks From Rice Husk Waste	101765
Yu, Jia / Kang, Yanming / Zhai, Zhiqiang (John)	Comparison of ground coupled heat transfer models for predicting underground building energy consumption	101808
Nadkarni, Rohit R. / Puthuvayi, Bimal	A comprehensive literature review of Multi-Criteria Decision Making methods in heritage buildings	101814
Lazar, Nina / Chithra, K.	A comprehensive literature review on development of Building Sustainability Assessment Systems	101450
Siddiqui, Nadeem / Abbas, Husain / Almusallam, Tarek / Binyahya, Abobaker / Al-Salloum, Yousef	Compression behavior of FRP-strengthened RC square columns of varying slenderness ratios under eccentric loading	101512
Chiranjiakumari Devi, Sanglakpam / Ahmad Khan, Rizwan	Compressive strength and durability behavior of graphene oxide reinforced concrete composites containing recycled concrete aggregate	101800
Soufeiani, Leila / Foliente, Greg / Nguyen, Kate T. Q. / San Nicolas, Rackel	Corrosion protection of steel elements in façade systems – A review	101759
Massone, Leonardo M. / Cáceres, Iván	Damage correlation in flexural walls with a displacement approach method for boundary detailing	101807
Benzaama, M. H. / Rajaoarisoa, L. H. / Ajib, B. / Lecoeuche, S.	A data-driven methodology to predict thermal behavior of residential buildings using piecewise linear models	101523
Chang, SooWon / Castro-Lacouture, Daniel / Yamagata, Yoshiki	Decision support for retrofitting building envelopes using multi-objective optimization under uncertainties	101413
Mashayekhi, Ali / Heravi, Gholamreza	A decision-making framework opted for smart building's equipment based on energy consumption and cost trade-off using BIM and MIS	101653
Akinosho, Taofeek D. / Oyedele, Lukumon O. / Bilal, Muhammad / Ajayi, Anuoluwapo O. / Delgado, Manuel Davila / Akinade, Olugbenga O. / Ahmed, Ashraf A.	Deep learning in the construction industry: A review of present status and future innovations	101827
Ngo, Duc Chinh / Saliba, Jacqueline / Saiyouri, Nadia / Sbartaï, Zoubir Mehdi	Design of a soil concrete as a new building material – Effect of clay and hemp proportions	101553
Tian, Zhichao / Wei, Shen / Shi, Xing	Developing data-driven models for energy-efficient heating design in office buildings	101778
Maleki, Behzad / Khadang, Amirhosein / Maddah, Heydar / Alizadeh, Mostafa / Kazemian, Ali / Ali, Hafiz Muhammad	Development and thermal performance of nanoencapsulated PCM/ plaster wallboard for thermal energy storage in buildings	101727
Awan, Usman / Knight, Ian	Domestic sector energy demand and prediction models for Punjab Pakistan	101790
Alrshoudi, Fahed / Mohammadhosseini, Hossein / Tahir, Mahmood Md / Alyousef, Rayed / Alghamdi, Hussam / Alharbi, Yousef / Alsaif, Abdulaziz	Drying shrinkage and creep properties of prepacked aggregate concrete reinforced with waste polypropylene fibers	101522
Mohammadhosseini, Hossein / Alrshoudi, Fahed / Tahir, Mahmood Md / Alyousef, Rayed / Alghamdi, Hussam / Alharbi, Yousef R. / Alsaif, Abdulaziz	Durability and thermal properties of prepacked aggregate concrete reinforced with waste polypropylene fibers	101723
Eliche-Quesada, D. / Ruiz-Molina, S. / Pérez-Villarejo, L. / Castro, E. / Sánchez-Soto, P. J.	Dust filter of secondary aluminium industry as raw material of geopolymer foams	101656
You, Young-Chan / Lee, Dongkeun	Effect of anchors on the seismic performance of exposed column-base plate weak-axis connections	101803
Hosen, Md.Akter / Jumaat, Mohd.Zamin / Alsubari, Belal / Sulong, N. H. Ramli / Ibrahim, Zainah / Alengaram, U.Johnson / Hashim, Huzaifa	Effect of Bonding Materials on the Flexural Improvement in RC Beams Strengthened with SNSM Technique Using GFRP Bars	101777
Çelikten, Serhat / Sarıdemir, Mustafa / Akçaözoğlu, Kubilay	Effect of calcined perlite content on elevated temperature behaviour of alkali activated slag mortars	101717
Ju, Cheng / Liu, Yushi / Jia, Minjie / Yu, Kunyang / Yu, Zhenyun / Yang, Yingzi	Effect of calcium oxide on mechanical properties and microstructure of alkali-activated slag composites at sub-zero temperature	101561
Wang, Feiliang / Yang, Jian / Nyunn, Sandy / Azim, Iftikhar	Effect of concrete infill walls on the progressive collapse performance of precast concrete framed substructures	101461
Yang, Zixu / Xiao, Hansong / Ji, Changqi / Wang, Baolong / Shi, Wenxing	Effect of installation height of indoor unit on field heating performance of room air conditioner	101527
Shi, Jia-Wei / Cao, Wen-Hai / Xu, Bing-Lei	Effect of liquid rubber modification on the bond behavior of externally bonded FRP laminate-concrete interface under dynamic loading	101533
Mathew, George / Issac, Binu M.	Effect of molarity of sodium hydroxide on the aluminosilicate content in laterite aggregate of laterised geopolymer concrete	101486
Ramos, Giovanny A. / de Matos, Paulo R. / Pelisser, Fernando / Gleize, Philippe J. P.	Effect of porcelain tile polishing residue on eco-efficient geopolymer: Rheological performance of pastes and mortars	101699
Al-Saawani, Mohammed A. / El-Sayed, Ahmed K. / Al-Negheimish, Abdulaziz I.	Effect of shear-span/depth ratio on debonding failures of FRP-strengthened RC beams	101771
Shi, Jinyan / Liu, Baoju / Wu, Xiang / Tan, Jinxia / Dai, Jingdan / Ji, Roujia	Effect of steam curing on surface permeability of concrete: Multiple transmission media	101475
Aldayel Aldossary, Mohammed Hamdan / Ahmad, Shamsad / Bahraq, Ashraf Awadh	Effect of total dissolved solids-contaminated water on the properties of concrete	101496
Durgun, Muhammed Yasin	Effect Of Wetting-Drying Cycles On Gypsum Plasters Containing Ground Basaltic Pumice And Polypropylene Fibers	101801
Chikhi, M.	Effective thermal conductivity of porous biomaterials: Numerical Investigation	101763
Shi, Di / Ye, Jiayuan / Zhang, Wensheng	Effects of activator content on properties, mineralogy, hydration and microstructure of alkali-activated materials synthesized from calcium silicate slag and ground granulated blast furnace slag	101791
Dif, Fodil / Douara, Taha Hocine / Zaitri, Rebih / Mouli, Mohamed	Effects of combined natural volcanic powders on the thermo-physical and mechanical properties of structural eco-concrete	101835
Nalon, Gustavo Henrique / Ribeiro, José Carlos Lopes / Araújo, Eduardo Nery Duarte de / Pedroti, Leonardo Gonçalves / Franco de Carvalho, José Maria / Santos, Rodrigo Felipe / Aparecido-Ferreira, Alex	Effects of different kinds of carbon black nanoparticles on the piezoresistive and mechanical properties of cement-based composites	101724
Chintalapudi, Karthik / Pannem, Rama Mohan Rao	The effects of Graphene Oxide addition on hydration process, crystal shapes, and microstructural transformation of Ordinary Portland Cement	101551
Chen, Deshen / Xu, Wucheng / Qian, Hongliang / Sun, Jianyun / Li, Jingfang	Effects of non-uniform temperature on closure construction of spatial truss structure	101532
Zhang, Changsen / Hu, Zhichao / Zhu, Huajun / Wang, Xu / Gao, Jie	Effects of silane on reaction process and microstructure of metakaolin-based geopolymer composites	101695
Li, Jiteng / Zhao, Tianyi / Wang, Peng / Yoon, Sungmin / Yu, Yuebin	Effects of various partitions on the accuracy of virtual in-situ calibration in building energy systems	101538
Matar, Pierre / Barhoun, Jean	Effects of waterproofing admixture on the compressive strength and permeability of recycled aggregate concrete	101521
Xin, Song / Xu, Hong / Li, Sasa / Wang, Wenhao / Guo, Jianghui / Yang, Wenyu	Efficiency evaluation of a floor standing air conditioner with different installation positions and air supply parameters applied to a large laboratory	101701
Shahsavar Goldanlou, Aysan / Kalbasi, Rasool / Afrand, Masoud	Energy usage reduction in an air handling unit by incorporating two heat recovery units	101545
Samadi, Mostafa / Huseien, Ghasan Fahim / Lim, Nor Hasanah Abdul Shukor / Mohammadhosseini, Hossein / Alyousef, Rayed / Mirza, Jahangir / Rahman, Ahmad Baharuddin Abd	Enhanced performance of nano-palm oil ash-based green mortar against sulphate environment	101640
Sadick, Abdul-Manan / Kamardeen, Imriyas	Enhancing employees’ performance and well-being with nature exposure embedded office workplace design	101789
Xin, Jianda / Zhang, Guoxin / Liu, Yi / Wang, Zhenhong / Yang, Ning / Wang, Yifeng / Mou, Rongfeng / Qiao, Yu / Wang, Juan / Wu, Zhe	Environmental impact and thermal cracking resistance of low heat cement (LHC) and moderate heat cement (MHC) concrete at early ages	101668
Gomes, Raul / Silvestre, José Dinis / de Brito, Jorge	Environmental, economic and energy life cycle assessment "from cradle to cradle" (3E-C2C) of flat roofs	101436
Sadhukhan, Debanjan / Peri, Sai / Sugunaraj, Niroop / Biswas, Avhishek / Selvaraj, Daisy Flora / Koiner, Katelyn / Rosener, Andrew / Dunlevy, Matt / Goveas, Neena / Flynn, David / Ranganathan, Prakash	Estimating surface temperature from thermal imagery of buildings for accurate thermal transmittance (U-value): A machine learning perspective	101637
Moradibistouni, Milad / Vale, Brenda / Isaacs, Nigel	Evaluating the use of polymers in residential buildings: Case study of a single storey detached house in New Zealand	101517
Hwang, Ruey-Lung / Lin, Tzu-Ping / Lin, Feng-Yi	Evaluation and mapping of building overheating risk and air conditioning use due to the urban heat island effect	101726
Bagheri, Seyedeh Marjan / Koushkbaghi, Mahdi / Mohseni, Ehsan / Koushkbaghi, Shahnaz / Tahmouresi, Behzad	Evaluation of environment and economy viable recycling cement kiln dust for use in green concrete	101809
Abed, Mohammed / de Brito, Jorge	Evaluation of high-performance self-compacting concrete using alternative materials and exposed to elevated temperatures by non-destructive testing	101720
Kowalski, Piotr / Kwiecień, Dariusz	Evaluation of simple evaporative cooling systems in an industrial building in Poland	101555
Shi, Jinyan / Liu, Baoju / Wu, Xiang / Qin, Jiali / Jiang, Junyi / He, Zhihai	Evolution of mechanical properties and permeability of concrete during steam curing process	101796
Pang, Rui / Xu, Zhu / Liang, Shuting / Zhu, Xiaojun / Hu, Kui	Experimental and analytical investigation on the in-plane mechanical property of discretely connected precast RC floor diaphragm	101819
Xue, Jianyang / Zhao, Xiangbi / Ke, Xiaojun / Zhang, Xin / Zhang, Fengliang / Zhang, Peng	Experimental and numerical investigation of high-strength concrete encased steel columns with rectangular-spiral stirrups	101518
Berardi, Umberto / Kisilewicz, Tomasz / Kim, Sumin / Lechowska, Agnieszka / Paulos, Jason / Schnotale, Jacek	Experimental and numerical investigation of the thermal transmittance of PVC window frames with silica aerogel	101665
Shobi, Mostafa Omran / Salarian, Hesamoddin / Nichkoohi, Ali Lohrasbi / Nimvari, Majid Eshagh	Experimental and numerical investigations of a modified designed baseboard radiator using an air gap enhancing free convection heat transfer	101535
Čekon, Miroslav / Šikula, Ondřej	Experimental and numerical study on the thermal performance of polycarbonate panels	101715
Santos, Paulo / Mateus, Diogo	Experimental assessment of thermal break strips performance in load-bearing and non-load-bearing LSF walls	101693
Bhowmik, Mrinal / Muthukumar, P. / Anandalakshmi, R.	Experimental based multi-objective optimisation for structured packed bed liquid desiccant dehumidification systems	101813
Aquino, Caroline D. / Branco, Jorge M.	Experimental evaluation of a modular timber unit filled with insulated corkboard	101725
Mofid, T. / Tavakoli, H. R.	Experimental investigation of post-earthquake behavior of RC beams	101673
Lakshani, M. M. T. / Jayathilaka, T. K. G. A. / Thamboo, J. A.	Experimental investigation of the unconfined compressive strength characteristics of masonry mortars	101558
Benmahiddine, Ferhat / Bennai, Fares / Cherif, Rachid / Belarbi, Rafik / Tahakourt, Abdelkader / Abahri, Kamilia	Experimental investigation on the influence of immersion/drying cycles on the hygrothermal and mechanical properties of hemp concrete	101758
Ashkezari, Ghasem Dehghani / Fotouhi, Farzan / Razmara, Mehrdad	Experimental relationships between steel fiber volume fraction and mechanical properties of ultra-high performance fiber-reinforced concrete	101613
Wang, Junqiang / Du, Bin	Experimental studies of thermal and acoustic properties of recycled aggregate crumb rubber concrete	101836
Ben Zaid, Zaineb / Tilioua, Amine / Lamaamar, Ibtissam / Ansari, Omar / Souli, Hanène / Hamdi Alaoui, Moulay Ahmed	An experimental study of the efficacy of integrating a phase change material into a clay-straw wall in the Drâa-Tafilalet Region (Errachidia Province), Morocco	101670
Ghasemi, Mehdi / Toghraie, Davood / Abdollahi, Ali	An experimental study on airborne particles dispersion in a residential room heated by radiator and floor heating systems	101677
Mo, Jinxu / Zeng, Lei / Guo, Fan / Liu, Yanhua / Ma, Linling / Chen, Buqing / Liu, Xianpan	Experimental study on damping properties of rubber powder modified styrene-acrylic emulsion concrete beam	101728
Liangdong, Ma / Tixiu, Ren / Tianjiao, Zhang / Tianyi, Zhao / Jili, Zhang	Experimental study on effect of operating parameters on performance of serially cascaded wastewater source heat pump	101458
Yurt, Ümit	An experimental study on fracture energy of alkali activated slag composites incorporated different fibers	101519
Cheng, Junfeng / Luo, Xiaoyong / Xiang, Ping	Experimental study on seismic behavior of RC beams with corroded stirrups at joints under cyclic loading	101489
Xue, Kai / Cao, Guangyu / Liu, Meng / Zhang, Yixian / Pedersen, Christoffer / Mathisen, Hans Martin / Stenstad, Liv-Inger / Skogås, Jan Gunnar	Experimental study on the effect of exhaust airflows on the surgical environment in an operating room with mixing ventilation	101837
Kalamees, Targo / Põldaru, Mattias / Ilomets, Simo / Klõšeiko, Paul / Kallavus, Urve / Rosenberg, Margit / Öiger, Karl	Failure analysis of a spray polyurethane foam roofing system	101752
Mattera, Claudio Giovanni / Jradi, Muhyiddine / Skydt, Mathis Riber / Engelsgaard, Sebastian Skals / Shaker, Hamid Reza	Fault detection in ventilation units using dynamic energy performance models	101635
Shao, Teng / Jin, Hong	A field investigation on the winter thermal comfort of residents in rural houses at different latitudes of northeast severe cold regions, China	101476
Alchaar, Aktham / Abed, Farid	Finite Element Analysis of Thin-Shell Concrete Sandwich Panel Under Eccentric Loading	101804
Kadhim, Majid M. A. / Jawdhari, Akram R. / Altaee, Mohammed J. / Adheem, Ali Hadi	Finite element modelling and parametric analysis of FRP strengthened RC beams under impact load	101526
Liu, Fangzhou / Battini, Jean-Marc / Pacoste, Costin	Finite element modelling for the dynamic analysis of hollow-core concrete floors in buildings	101750
Gnanachelvam, Sayilacksha / Ariyanayagam, Anthony / Mahendran, Mahen	Fire resistance of LSF wall systems lined with different wallboards including bio-PCM mat	101628
Mohammed, Hasan Jasim / Aayeel, Omar Khaleefah	Flexural Behavior of Reinforced Concrete Beams Containing Recycled Expandable Polystyrene Particles	101805
Alawad, Omar M. / Gombeda, Matthew J. / Quiel, Spencer E. / Naito, Clay J.	Flexural performance of non-loadbearing blast-resistant precast concrete cladding panels with discrete connections	101438
Nuruzzaman, Md / Camargo Casimiro, Jhanssen Orlando / Sarker, Prabir Kumar	Fresh and hardened properties of high strength self-compacting concrete using by-product ferronickel slag fine aggregate	101686
Das, Shaswat Kumar / Mustakim, Syed Mohammed / Adesina, Adeyemi / Mishra, Jyotirmoy / Alomayri, Thamer Salman / Assaedi, Hasan Suliman / Kaze, Cyriaque Rodrigue	Fresh, Strength and Microstructure Properties of Geopolymer Concrete Incorporating Lime and Silica Fume as Replacement of Fly Ash	101780
Gong, Mingju / Wang, Jin / Bai, Yin / Li, Bo / Zhang, Lei	Heat load prediction of residential buildings based on discrete wavelet transform and tree-based ensemble learning	101455
Zhang, Yixian / Cao, Guangyu / Feng, Guohui / Xue, Kai / Pedersen, Christoffer / Mathisen, Hans Martin / Stenstad, Liv-Inger / Skogås, Jan Gunnar	The impact of air change rate on the air quality of surgical microenvironment in an operating room with mixing ventilation	101770
Ślusarek, Jan / Orlik-Kożdoń, Bożena / Bochen, Jerzy / Muzyczuk, Tomasz	Impact of the imperfection of thermal insulation on structural changes of thin-layer façade claddings in ETICS	101487
Chuta, Edgar / Colin, Johan / Jeong, Jena	The impact of the water-to-cement ratio on the surface morphology of cementitious materials	101716
Zender – Świercz, Ewa	Improvement of indoor air quality by way of using decentralised ventilation	101663
Said, Mohamed / Adam, Maher A. / Arafa, Alaa E. / Moatasem, Ahmed	Improvement of punching shear strength of reinforced lightweight concrete flat slab using different strengthening techniques	101749
Jang, Ryan / Collinge, William	Improving BIM asset and facilities management processes: A Mechanical and Electrical (M&E) contractor perspective	101540
Cortiços, Nuno D.	Improving residential building efficiency with membranes over façades: The Mediterranean context	101421
Chaudhuri, Anirban / Bhattacharyya, Subarna / Chaudhuri, Punarbasu / Sudarshan, Mathummal / Mukherjee, Somnath	In vitro deterioration study of concrete and marble by Aspergillus tamarii	101774
Spósito, Felipe A. / Higuti, Ricardo T. / Tashima, Mauro M. / Akasaki, Jorge L. / Melges, José Luiz P. / Assunção, Camila C. / Bortoletto, Marcelo / Silva, Rodrigo G. / Fioriti, Cesar F.	Incorporation of PET wastes in rendering mortars based on Portland cement/hydrated lime	101506
Dar, M. Adil / Sahoo, Dipti Ranjan / Jain, Arvind K.	Influence of chord compactness and slenderness on axial compression behavior of built-up battened CFS columns	101743
Wang, Qinghe / Li, Zhe / Zhang, Yuzhuo / Zhang, Huan / Zhou, Mei / Fang, Yanfeng	Influence of coarse coal gangue aggregates on elastic modulus and drying shrinkage behaviour of concrete	101748
Zhao, Zhongwei / Zhang, Mengzhou / Wu, Gang / Liang, Bing / Yuan, Ye / Liu, Haiqing	Influence of compression force on the probability distribution of moment capacity for WHSJs with randomly located corrosion	101619
Franco de Carvalho, José Maria / Schmidt, Wolfram / Kühne, Hans-Carsten / Fiorotti Peixoto, Ricardo André	' Influence of high-charge and low-charge PCE-based superplasticizers on Portland cement pastes containing particle-size designed recycled mineral admixtures	101515
Mohammed, Hazha / Sadique, Monower / Shaw, Andy / Brás, Ana	The influence of incorporating plastic within concrete and the potential use of microwave curing; A review	101824
Janusz, Marchwiński / Karolina, Kurtz-Orecka	Influence of photovoltaic installation on energy performance of a nursery building in Warsaw (Central European conditions)	101630
Kumar, Pawan / Singh, Navdeep	Influence of recycled concrete aggregates and Coal Bottom Ash on various properties of high volume fly ash-self compacting concrete	101491
Yang, Dong / Dong, Song / Du, Tao / Ji, Wenhui	Influences of vent location on the removal of gaseous contaminants and indoor thermal environment	101679
Kheradmand, Mohammad / Azenha, Miguel / Vicente, Romeu / de Aguiar, José L. B.	An innovative approach for temperature control of massive concrete structures at early ages based on post-cooling: Proof of concept	101832
Li, Guoqing / Meng, Xin / Zhang, Xiaowei / Zhang, Ling / Du, Chenqiu / Li, Nan / Yu, Wei / Xiong, Jie / Zhang, Shaoxing / Li, Baizhan	An innovative ventilation system using piston wind for the thermal environment in Shanghai subway station	101276
Wang, Zejie / Gao, Huan / Liu, Hao / Liao, Libing / Mei, Lefu / Lv, Guocheng / Zhu, Guodian / Huang, Danlan	Inorganic thermal insulation material prepared from pitchstone	101745
Duarte, Paulo Cesar / Nakao, Fernando / Ortenzi, Altibano	Integrated product development and lifecycle management in building production – A case study for logistic of mortar distribution in building sites	101802
Yi, Yun Kyu / Kang, Bhujon	Integrating a wind turbine into a parking pavilion for generating electricity	101471
Hosseinzadeh, Yousef / Jalili, Shahin / Khani, Reza	Investigating the effects of flax fibers application on multi-objective optimization of laminated composite plates for simultaneous cost minimization and frequency gap maximization	101477
Musarat, Muhammad Ali / Alaloul, Wesam Salah / Liew, M. S. / Maqsoom, Ahsen / Qureshi, Abdul Hannan	Investigating the impact of inflation on building materials prices in construction industry	101485
Norvaišiene, Rosita / Buhagiar, Vincent / Burlingis, Arūnas / Miškinis, Kestutis	Investigation of mechanical resistance of external thermal insulation composite systems (ETICS)	101682
Mohammed, Azad A. / Hagi Fattah, Omed A.	Investigation of parameters affecting direct shear behavior of concrete strengthened with CFRP laminate	101480
Wu, Hangzi / Sun, Xiaoying / Wu, Yue	Investigation of the relationships between thermal, acoustic, illuminous environments and human perceptions	101839
Li, Shengli / Chu, Yajie / Liu, Xin / Liu, Lulu / Guo, Pan / Wang, Xidong / Li, Panjie	Investigation on passive simulation method and factors influencing the type-C-terrain wind profile of a structural wind-resistant moving-vehicle tester	101482
Bellum, Ramamohana Reddy / Muniraj, Karthikeyan / Indukuri, Chandra Sekhar Reddy / Madduru, Sri Rama Chand	Investigation on Performance Enhancement of Fly ash-GGBFS Based Graphene Geopolymer Concrete	101659
Thanaraj, Daniel Paul / Anand, N. / Arulraj, Prince / Al-Jabri, Khalifa	Investigation on structural and thermal performance of reinforced concrete beams exposed to standard fire	101764
Keppert, Martin / Kobera, Libor / Scheinherrová, Lenka / Doleželová, Magdalena / Brus, Jiri / Černý, Robert	Kinetics of pozzolanic reaction and carbonation in ceramic – lime system: Thermogravimetry and solid-state NMR spectroscopy study	101729
Gong, Jie / Han, Xiaocheng / Su, Wufeng / Xi, Zhonghua / Cai, Jun / Wang, Qingjun / Li, Jinghai / Xie, Hongfeng	Laboratory evaluation of warm-mix epoxy SBS modified asphalt binders containing Sasobit	101550
Balasbaneh, Ali Tighnavard / Yeoh, David / Abidin, Ahmad Razin Zainal	Life Cycle Sustainability Assessment of Window Renovations in Schools against Noise Pollution in Tropical Climates	101784
Adhikari, Pramodit / Mahmoud, Hussam / Xie, Aiwen / Simonen, Kathrina / Ellingwood, Bruce	Life-cycle cost and carbon footprint analysis for light-framed residential buildings subjected to tornado hazard	101657
Kadhim, Abdullah / Sadique, Monower / Al-Mufti, Rafal / Hashim, Khalid	Long-term performance of novel high-calcium one-part alkali-activated cement developed from thermally activated lime kiln dust	101766
Yousefli, Zahra / Nasiri, Fuzhan / Moselhi, Osama	Maintenance workflow management in hospitals: An automated multi-agent facility management system	101431
Prachasaree, Woraphot / Limkatanyu, Suchart / Hawa, Abideng / Sukontasukkul, Piti / Chindaprasirt, Prinya	Manuscript title: Development of strength prediction models for fly ash based geopolymer concrete	101704
Tanveer, Muhammad / Usman, Muhammad / Khan, Imdad U. / Farooq, Syed H. / Hanif, Asad	Material optimization of tuned liquid column ball damper (TLCBD) for the vibration control of multi-storey structure using various liquid and ball densities	101742
Yazici, Sevil / Tanaçan, Leyla	Material-based computational design (MCD) in sustainable architecture	101543
Franco, Alessandro / Leccese, Francesco	Measurement of CO2 concentration for occupancy estimation in educational buildings with energy efficiency purposes	101714
Erfanimanesh, A. / Sharbatdar, M. K.	Mechanical and Microstructural Characteristics of Geopolymer Paste, Mortar, and Concrete Containing Local Zeolite and Slag Activated by Sodium Carbonate	101781
Basha, Shaik Inayath / Ali, M. R. / Al-Dulaijan, S. U. / Maslehuddin, M.	Mechanical and thermal properties of lightweight recycled plastic aggregate concrete	101710
Guo, Xiaonong / Zong, Shaohan / Shen, Zhirong / Zhu, Shaojun / Yuan, Shiyan	Mechanical behavior of in-service axial compression angle steel members strengthened by welding	101736
Wong, Chee Lum / Mo, Kim Hung / Alengaram, U. Johnson / Yap, Soon Poh	Mechanical strength and permeation properties of high calcium fly ash-based geopolymer containing recycled brick powder	101655
Ziganshin, A. M. / Logachev, K. I.	Minimizing local drag by shaping a flanged slotted hood along the boundaries of vortex zones occurring at inlet	101666
Yeung, Jaime S. K. / Yam, Michael C. H. / Wong, Y. L.	Model for predicting shrinkage of concrete using calcium sulfoaluminate cement blended with OPC, PFA and GGBS	101671
Reuge, N. / Collet, F. / Pretot, S. / Moissette, S. / Bart, M. / Lanos, C.	Modeling of hygrothermal transfers through a bio-based multilayered wall tested in a bi-climatic room	101470
Elkhayat, Youssef O. / Ibrahim, Mona G. / Tokimatsu, Koji / Ali, Ahmed AbdelMonteleb M.	Multi-criteria selection of high-performance glazing systems: A case study of an office building in New Cairo, Egypt	101466
Lu, Shilei / Yu, Zewen / Fan, Minchao	Multi-layered and multi-dimensional suitability evaluation of tubular daylight guidance systems	101820
Yong, Zhang / Li-juan, Yuan / Qian, Zhang / Xiao-yan, Sun	Multi-objective optimization of building energy performance using a particle swarm optimizer with less control parameters	101505
Shokrollahi, Samaneh / Hadavi, Mohammad / Heidarinejad, Ghassem / Pasdarshahri, Hadi	Multi-objective optimization of underfloor air distribution (UFAD) systems performance in a densely occupied environment: A combination of numerical simulation and Taguchi algorithm	101495
Yekrangnia, Mohammad / Asteris, Panagiotis G.	Multi-strut macro-model for masonry infilled frames with openings	101683
Şimşek, Barış	Multi-walled carbon nanotubes with different features reinforced cement pastes: a compressive and systematic approach using principal component analysis	101792
Gámez-Espinosa, Erasmo / Bellotti, Natalia / Deyá, Cecilia / Cabello, Marta	Mycological studies as a tool to improve the control of building materials biodeterioration	101738
Torres, Isabel / Matias, Gina / Faria, Paulina	Natural hydraulic lime mortars - the effect of ceramic residues on physical and mechanical behaviour	101747
Liu, Jin-Cheng / Zhang, Zhigang	Neural network models to predict explosive spalling of PP fiber reinforced concrete under heating	101472
Hamada Fakra, Damien Ali / Alfonso José, Blázquez Recio / Murad, Nour Mohammad / Gatina, Jean Claude	A new affordable and quick experimental device for measuring the thermo-optical properties of translucent construction materials	101708
Ming, Zhang / Rui, Kang / Guangchun, Zhou / Xudong, Zhi / Parke, Gerard	A new method to fabricate a single-layer reticulated shell model and its shaking table test	101755
Luo, X. J.	A novel clustering-enhanced adaptive artificial neural network model for predicting day-ahead building cooling demand	101504
Naderpour, Hosein / Mirrashid, Masoomeh	A novel definition of damage states for structural elements in framed reinforced concrete buildings	101479
Dong, Qinghai / Li, Shuhong / Han, Cheng	Numerical and experimental study of the effect of solar radiation on thermal comfort in a radiant heating system	101497
Amini, Mohsen / Maddahian, Reza / Saemi, Simindokht	Numerical investigation of a new method to control the condensation problem in ceiling radiant cooling panels	101707
Guo, Penghua / Wang, Shuang / Lei, Yiqing / Li, Jingyin	Numerical simulation of solar chimney-based direct airside free cooling system for green data centers	101793
Zhao, Chunfeng / Ye, Xin / He, Kaicheng / Gautam, Avinash	Numerical study and theoretical analysis on blast resistance of fabricated concrete slab	101760
Tiji, Mohammadreza Ebrahimnataj / Eisapour, Mehdi / Yousefzadeh, Reza / Azadian, Mohammad / Talebizadehsardari, Pouyan	A numerical study of a PCM-based passive solar chimney with a finned absorber	101516
Gatheeshgar, Perampalam / Poologanathan, Keerthan / Gunalan, Shanmuganathan / Tsavdaridis, Konstantinos Daniel / Nagaratnam, Brabha / Iacovidou, Eleni	Optimised cold-formed steel beams in modular building applications	101607
Khan, Mehran / Ali, Majid	Optimization of concrete stiffeners for confined brick masonry structures	101689
Zhang, Huibo / Shi, Chengnan / Pan, Deng / Xuan, Yingli / He, Xueqiong	Optimization of effective moisture penetration depth model considering airflow velocity for gypsum-based materials	101539
Al-Saadi, Saleh N. / Al-Jabri, Khalifa S.	Optimization of envelope design for housing in hot climates using a genetic algorithm (GA) computational approach	101712
Khater, H. M. / Ghareib, Mahmoud	Optimization of geopolymer mortar incorporating heavy metals in producing dense hybrid composites	101684
Filomeno, R. H. / Rodier, L. B. / Ballesteros, J. E. M. / Rossignolo, J. A. / Savastano, H.	Optimizing the modified atmosphere parameters in the carbonation process for improved fiber-cement performance	101676
Bidabadi, Mehran Shirani / Akbari, Mahmood / Panahi, Omid	Optimum mix design of recycled concrete based on the fresh and hardened properties of concrete	101483
Alchapar, Noelia L. / Correa, Erica N.	Optothermal properties of façade coatings. Effects of environmental exposure over solar reflective index	101536
Picallo-Perez, Ana / Lazzaretto, Andrea / Sala, José M.	Overview and implementation of dynamic thermoeconomic & diagnosis analyses in HVAC&R systems	101429
Li, Zhiyong / Chang, Jiajia / Zhang, Sibin / Zhao, Yuqing / Gao, Jianling	Performance and economic analysis of a Bimetal Automatic Light Adjusting Device- Comparative studies	101678
Singh, Smita / Aswath, M. U. / Ranganath, R. V.	Performance assessment of bricks and prisms: Red mud based geopolymer composite	101462
Preet, Sajan / Sharma, Manoj Kumar / Mathur, Jyotirmay / Chowdhury, Amartya / Mathur, Sanjay	Performance evaluation of photovoltaic double-skin facade with forced ventilation in the composite climate	101733
Lin, Lin / Liu, Xiaohua / Zhang, Tao	Performance investigation of heating terminals in a railway depot: On-site measurement and CFD simulation	101818
Bankir, Muzeyyen Balcikanli / Sevim, Umur Korkut	Performance optimization of hybrid fiber concretes against acid and sulfate attack	101443
Berkak, Hichem / Bederina, Madani / Makhloufi, Zoubir	Physico-mechanical and microstructural properties of an eco-friendly limestone mortar modified with styrene-polyacrylic latex	101463
Tang, Hao / Ding, Yong / Singer, Brett C.	Post-occupancy evaluation of indoor environmental quality in ten nonresidential buildings in Chongqing, China	101649
Giustetto, Roberto / Pastero, Linda / Aquilano, Dino	Potential effects of the shape of gypsum aggregates on the early sulfation of marble and travertine	101794
Emamjomeh, Asalsadat / Zhu, Yimin / Beck, Melissa	The potential of applying immersive virtual environment to biophilic building design: A pilot study	101481
Liu, Yushi / Fu, Shixue / Gao, Jinlin / Yang, Yingzi	Prediction for temperature evolution and compressive strength of non-mass concrete with thermal insulation curing in cold weather	101737
Saradar, Ashkan / Nemati, Parisa / Paskiabi, Ali Shadmani / Moein, Mohammad Mohtasham / Moez, Hossein / Vishki, Elaheh Hassanzadeh	Prediction of mechanical properties of lightweight basalt fiber reinforced concrete containing silica fume and fly ash: Experimental and numerical assessment	101732
Kumar, Shashikant / Rai, Baboo / Biswas, Rahul / Samui, Pijush / Kim, Dookie	Prediction of rapid chloride permeability of self-compacting concrete using Multivariate Adaptive Regression Spline and Minimax Probability Machine Regression	101490
Miranda de Lima, Adauto José / Iwakiri, Setsuo / Satyanarayana, Kestur G. / Lomelí-Ramírez, María Guadalupe	Preparation and characterization of wood-cement particleboards produced using metakaolin, calcined ceramics and residues of Pinus spp.	101722
Yu, Hang / Li, Chaoen / Zhang, Kege / Tang, Yin / Song, Yuan / Wang, Meng	Preparation and thermophysical performance of diatomite-based composite PCM wallboard for thermal energy storage in buildings	101753
Yang, Hong / Yan, Yun / Hu, Zhihua	The preparation of nano calcium carbonate and calcium silicate hardening accelerator from marble waste by nitric acid treatment and study of early strength effect of calcium silicate on C30 concrete	101507
Liu, Yushi / Yu, Zhenyun / Lv, Chengbo / Meng, Fanlu / Yang, Yingzi	Preparation of waste cooking oil emulsion as shrinkage reducing admixture and its potential use in high performance concrete: Effect on shrinkage and mechanical properties	101488
Hamada, Hussein M. / Tayeh, Bassam A. / Al-Attar, Alyaa / Yahaya, Fadzil M. / Muthusamy, Khairunisa / Humada, Ali M.	The present state of the use of eggshell powder in concrete: A review	101583
González-Domínguez, Jaime / Sánchez-Barroso, Gonzalo / García-Sanz-Calcedo, Justo	Preventive maintenance optimisation of accessible flat roofs in healthcare centres using the Markov chain	101775
Łaźniewska-Piekarczyk, Beata / Piekarczyk, Adam	The problem of the equivalent time to start the internal frost resistance test on self-compacting concrete with supplementary cementitious materials	101503
Anjos, Marcos A. S. / Araújo, Tomaz R. / Ferreira, Ruan L. S. / Farias, Evilane C. / Martinelli, Antonio E.	Properties of self-leveling mortars incorporating a high-volume of sugar cane bagasse ash as partial Portland cement replacement	101694
Yang, Dingyi / Liu, Miao / Ma, Zhiming	Properties of the foam concrete containing waste brick powder derived from construction and demolition waste	101509
Akcay, Cemil / Şolt, Ayşen / Korkmaz, Nail Mahir / Sayin, Baris	A proposal for the reconstruction of a historical masonry building constructed in Ottoman Era (Istanbul)	101493
Xue, Jianyang / Zhang, Xin / Ren, Rui	Pseudo-dynamic test investigation of recycled concrete-encased steel frame	101834
Shirzadi, Mohammadreza / Mirzaei, Parham A. / Tominaga, Yoshihide	RANS model calibration using stochastic optimization for accuracy improvement of urban airflow CFD modeling	101756
Akinyemi, Banjo A. / Adesina, Adeyemi	Recent advancements in the use of biochar for cementitious applications: A review	101705
Song, Kwonsik / Ahn, Joseph / Ahn, Yonghan / Park, Moonsun / Kwon, Nahyun	Reduction and transformation of energy use data for end-user group categorization in dormitory buildings	101524
Wijayasundara, Mayuri / Zhang, Lihai / Duffield, Colin	Relating building space to performance outcomes – A methodology to explore the relationship	101662
Cu, Yen T. H. / Tran, Mien V. / Ho, Chinh H. / Nguyen, Phuc H.	Relationship between workability and rheological parameters of self-compacting concrete used for vertical pump up to supertall buildings	101786
Nguyen, Hoang D. / Shin, Myoungsu / Torbol, Marco	Reliability assessment of a planar steel frame subjected to earthquakes in case of an implicit limit-state function	101782
Pokorska-Silva, Iwona / Kadela, Marta / Fedorowicz, Lidia	A reliable numerical model for assessing the thermal behavior of a dome building	101706
Tena-Colunga, Arturo / Hernández-Ramírez, Héctor	Resilient seismic design of steel frames with hysteretic fuses in a code-oriented format	101768
Wang, Yanhua / Feng, Yan / Huang, Dongsheng / Huang, Zirui / Chen, Zhongfan	Restoring force model of an energy-dissipation joint and non-linear dynamic analysis of a hybrid frame	101762
Walter Costa, Joao Francisco / Amorim, Cláudia Naves David / Ribeiro Silva, Joara Cronemberger	Retrofit guidelines towards the achievement of net zero energy buildings for office buildings in Brasilia	101680
Jiang, Chenhui / Wang, Aiying / Bao, Xufan / Ni, Tongyuan / Ling, Jin	A review on geopolymer in potential coating application: materials, preparation and basic properties	101734
Ben Romdhane, Sahar / Amamou, Amani / Ben Khalifa, Rim / Mahjoub Said, Nejla / Younsi, Zohir / Jemni, Abdelmajid	A review on thermal energy storage using phase change materials in passive building applications	101563
Breysse, Denys / Romão, Xavier / Alwash, Maitham / Sbartaï, Zoubir Mehdi / Luprano, Vincenza A. M.	Risk evaluation on concrete strength assessment with NDT technique and conditional coring approach	101541
Gharbia, Marwan / Chang-Richards, Alice / Lu, Yuqian / Zhong, Ray Y. / Li, Heng	Robotic technologies for on-site building construction: A systematic review	101584
Mundra, Sanjay / Agrawal, Vinay / Nagar, Ravindra	Sandstone cutting waste as partial replacement of fine aggregates in concrete: A mechanical strength perspective	101534
Meddah, M. S. / Benkari, N. / Al-Saadi, S. N. / Al Maktoumi, Y.	Sarooj mortar: From a traditional building material to an engineered pozzolan -mechanical and thermal properties study	101754
He, Shaofeng / Deng, Zongcai / Yao, Junsuo	Seismic behavior of ultra-high performance concrete long columns reinforced with high-strength steel	101740
Chourasia, Ajay / Singhal, Shubham / Parashar, Jalaj	Seismic performance evaluation of full-scale confined masonry building using light weight cellular panels	101473
Adamus, Janina / Pomada, Marta	Selected issues of choosing composite materials for window supporting beams	101542
Yoon, Yong-Sik / Yang, Keun-Hyeok / Kwon, Seung-Jun	Service life of GGBFS concrete under carbonation through probabilistic method considering cold joint and tensile stress	101826
Shahrour, Norhan / Allouzi, Rabab	' Shear behavior of captive- and short- column effects using different basalt aggregate contents	101508
Haddad, Rami H. / Yaghmour, Emad M.	Side NSM CFRP strips with different profiles for strengthening reinforced concrete beams	101772
Mahadevan, Meera / Francis, Ann / Thomas, Albert	A simulation-based investigation of sustainability aspects of 3D printed structures	101735
Naderi, Ehsan / Sajadi, Behrang / Naderi, Erfan / Bakhti, Babak	Simulation-based performance analysis of residential direct evaporative coolers in four climate regions of Iran	101514
Fatourehchi, Dorsa / Zarghami, Esmaeil	Social sustainability assessment framework for managing sustainable construction in residential buildings	101761
Sabzehgar, Reza / Amirhosseini, Diba Zia / Rasouli, Mohammad	Solar power forecast for a residential smart microgrid based on numerical weather predictions using artificial intelligence methods	101629
Jahan Talukdar, Md. Sarwar / Talukdar, Tahmid Hassan / Singh, Manoj Kumar / Baten, Md. Abdul / Hossen, Md. Shahadat	Status of thermal comfort in naturally ventilated university classrooms of Bangladesh in hot and humid summer season	101700
Huang, Wei / Huang, Xiege / Xing, Qiong / Zhou, Zhi	Strength reduction factor of crumb rubber as fine aggregate replacement in concrete	101346
Tena-Colunga, Arturo / Hernández-Márquez, Obed / Archundia-Aranda, Hans I.	Strengthening of reinforced concrete prismatic and haunched beams using light jacketing	101757
Kumarappa, Darshan Ballekere / Peethamparan, Sulapha	Stress-strain characteristics and brittleness index of alkali-activated slag and class C fly ash mortars	101595
Tian, Guoji / Fan, Yuesheng / Wang, Huan / Peng, Kai / Zhang, Xin / Zheng, Huifan	Studies on the thermal environment and natural ventilation in the industrial building spaces enclosed by fabric membranes: A case study	101651
Guo, Yaodong / Liu, Yuanzhen / Wang, Wenjing / Zhang, Yu / Wang, Zhaoxu / Jiang, Lu	A study on heat transfer performance of recycled aggregate thermal insulation concrete	101797
Lu, Shilei / Su, Na / Li, Yuwei / Liu, Yang / Wang, Ran	Suitability evaluation of cold sources in green buildings based on a field study	101795
Kim, Soonho / Choi, Surak / Yoo, Doo-Yeol	Surface modification of steel fibers using chemical solutions and their pullout behaviors from ultra-high-performance concrete	101709
Nakagawa, Akito / Ikeda, Hiroki / Maeda, Yoshihiro / Nakaya, Takashi	A survey of high school students' clothing in classroom	101469
Narasimman, Kaarthika / Jassam, Taha M. / Velayutham, T. S. / Yaseer, M. M. M. / Ruzaimah, R.	The synergic influence of carbon nanotube and nanosilica on the compressive strength of lightweight concrete	101719
Liu, Baoju / Shi, Jinyan / Liang, Hui / Jiang, Junyi / Yang, Yuanxia / He, Zhihai	Synergistic enhancement of mechanical property of the high replacement low-calcium ultrafine fly ash blended cement paste by multiple chemical activators	101520
Ali, M. / Alabdulkarem, A. / Nuhait, A. / Al-Salem, K. / Iannace, G. / Almuzaiqer, R. / Al-turki, A. / Al-Ajlan, F. / Al-Mosabi, Y. / Al-Sulaimi, A.	Thermal and acoustic characteristics of novel thermal insulating materials made of Eucalyptus Globulus leaves and wheat straw fibers	101452
Ashkezari, Ghasem Dehghani / Razmara, Mehrdad	Thermal and mechanical evaluation of ultra-high performance fiber-reinforced concrete and conventional concrete subjected to high temperatures	101621
Triano-Juárez, J. / Macias-Melo, E. V. / Hernández-Pérez, I. / Aguilar-Castro, K. M. / Xamán, J.	Thermal behavior of a phase change material in a building roof with and without reflective coating in a warm humid zone	101648
Hadji, F. / Ihaddadene, N. / Ihaddadene, R. / Betga, A. / Charick, A. / Logerais, P. O.	Thermal conductivity of two kinds of earthen building materials formerly used in Algeria	101823
Gao, Yanna / He, Fan / Xu, Ting / Meng, Xi / Zhang, Ming / Yan, Lianyu / Gao, Weijun	Thermal performance analysis of sensible and latent heat thermal energy storage tanks: A contrastive experiment	101713
Nunes, Gustavo / de Melo Moura, Jorge Daniel / Güths, Saulo / Atem, Camila / Giglio, Thalita	Thermo-energetic performance of wooden dwellings: Benefits of cross-laminated timber in Brazilian climates	101468
Hamidavi, Tofigh / Abrishami, Sepehr / Hosseini, M.Reza	Towards intelligent structural design of buildings: A BIM-based solution	101685
Li, Hong Xian / Li, Yan / Zhang, Limao	A two-step approach for cost-effective design analysis of Net Zero Energy Homes	101546
Bomfim Fraga, Yuri Sotero / da Silva Rêgo, João Henrique / Silva Capuzzo, Valdirene Maria / da Silva Andrade, Daniel / Morais, Paulo Cesar	Ultrasonication and synergistic effects of silica fume and colloidal nanosilica on the C–S–H microstructure	101702
Bernardo, Luís F. A. / Andrade, Jorge M. A.	A unified softened truss model for RC and PC beams under torsion	101467
Qin, Fengjiang / Zhang, Zhigang / Yin, Zhiwei / Di, Jin / Xu, Liangjin / Xu, Xiaoqing	Use of high strength, high ductility engineered cementitious composites (ECC) to enhance the flexural performance of reinforced concrete beams	101746
Bamigboye, Gideon O. / Okara, Odochi / Bassey, Daniel E. / Jolayemi, Kayode J. / Ajimalofin, David	The use of Senilia senilis seashells as a substitute for coarse aggregate in eco-friendly concrete	101811
Benjeddou, Omrane / Alyousef, Rayed / Mohammadhosseini, Hossein / Soussi, Chokri / Khadimallah, Mohamed Amine / Alabduljabbar, Hisham / Tahir, Mahmood Md	Utilisation of waste marble powder as low-cost cementing materials in the production of mortar	101642
Wang, Yuan / Shen, Chao / Sun, Pengyi / Li, Chengyao / Zhang, Chunxiao	Utilization of Waste Heat from Commercial Kitchen Exhaust for Water Heating and Dish Drying	101788
Dong, Wenqiang / Chen, Youming / Bao, Yang / Fang, Aimin	A validation of dynamic hygrothermal model with coupled heat and moisture transfer in porous building materials and envelopes	101484
Xie, Zhong / Hu, Xiamin / Du, Hao / Zhang, Xiaoyu	Vibration behavior of timber-concrete composite floors under human-induced excitation	101744
Wang, Zeli / Li, Heng / Yang, Xintao	Vision-based robotic system for on-site construction and demolition waste sorting and recycling	101769
Darvish, Pouya / Alengaram, U. Johnson / Poh, Yap Soon / Ibrahim, Shaliza / Yusoff, Sumiani	Volume based design approach for sustainable palm oil clinker as whole replacement for conventional sand in mortar	101660
Ameri, Farshad / Zareei, Seyed Alireza / Behforouz, Babak	Zero-cement vs. cementitious mortars: An experimental comparative study on engineering and environmental properties	101620

About this
data sheet
IssueID
36774
Published on:
12/05/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Journal of Building Engineering - November 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Journal of Building Engineering - November 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.