Journal of Building Engineering - November 2019

Published:	November 2019

Articles in this Issue

Author(s)	Title	Page(s)
Dias Barkokebas, Regina / Chen, Yuxiang / Yu, Haitao / Al-Hussein, Mohamed	Achieving housing energy-efficiency requirements: Methodologies and impacts on housing construction cost and energy performance	100874
Månsson, Tommie / Rukundo, Adones / Almgren, Magnus / Tsigas, Philippas / Marx, Christian / Ostermeyer, York	Analysis of door openings of refrigerated display cabinets in an operational supermarket	100899
Zuhaib, Sheikh / Hajdukiewicz, Magdalena / Goggins, Jamie	Application of a staged automated calibration methodology to a partially-retrofitted university building energy model	100866
Lu, Xinrui / Memari, Ali	Application of infrared thermography for in-situ determination of building envelope thermal properties	100885
Kim, Boksun / Wisniewski, Josef / Baker, Toby / Oyinlola, Muyiwa	Behaviour of sand-filled plastic bottled clay panels for sustainable homes	100895
Aghapour, Amir Hossein / Yazdani, Maziar / Jolai, Fariborz / Mojtahedi, Mohammad	Capacity planning and reconfiguration for disaster-resilient health infrastructure	100853
Kumar, V. R. Prasath / Gunasekaran, K. / Shyamala, T.	Characterization study on coconut shell concrete with partial replacement of cement by GGBS	100830
Elmushyakhi, Abraham	Collapse mechanisms of out-of-plane preload composite sandwich beams under in-plane loading	100875
Sivrikaya, Hüseyin / Tesařová, Daniela / Jeřábková, Eva / Can, Ahmet	Color change and emission of volatile organic compounds from Scots pine exposed to heat and vacuum-heat treatment	100918
Teng-teng, Huang / Da-wei, Zhang / Yu-xi, Zhao / Jun-jin, Liu / Jian-hui, Li	Comprehensive appraisal of the safety of hidden frame glass curtain wall based on fuzzy theory	100863
Amer, Mohamed / Mustafa, Ahmed / Attia, Shady	Conceptual framework for off-site roof stacking construction	100873
Fattah, Mohammed Y. / Salim, Nahla M. / Alwan, Kamal K.	Contact pressure distribution under circular shallow foundation subjected to vertical and rocking vibration modes	100908
Marvila, M. T. / Azevedo, A. R. G. / Alexandre, J. / Zanelato, E. B. / Azeredo, N. G. / Simonassi, N. T. / Monteiro, S. N.	Correlation between the properties of structural clay blocks obtained by destructive tests and Ultrasonic Pulse Tests	100869
Asman, Gifty Efua / Kissi, Ernest / Agyekum, Kofi / Baiden, Bernard Kofi / Badu, Edward	Critical components of Environmentally Sustainable Buildings Design Practices of office buildings in Ghana	100925
Hassan, Osama A. B. / Öberg, Fredrik / Gezelius, Emil	Cross-laminated timber flooring and concrete slab flooring: A comparative study of structural design, economic and environmental consequences	100881
Mourak, Abdellah / Hajjaji, Mohamed / Alagui, Abdelhakim	Cured cuttlebone/chitosan-heated clay composites: Microstructural characterization and practical performances	100872
Carrillo, Julian / Oyarzo-Vera, Claudio / Blandón, Carlos	Damage assessment of squat, thin and lightly-reinforced concrete walls by the Park & Ang damage index	100921
Asefi, Maziar / Bahremandi-Tolou, Mahnaz	Design challenges of reciprocal frame structures in architecture	100867
Müller, Petr / Novak, Josef / Holan, Jakub	Destructive and non-destructive experimental investigation of polypropylene fibre reinforced concrete subjected to high temperature	100906
Koçer, Mustafa / Ozturk, Murat / Arslan, M. Hakan	Determination of moment, shear and ductility capacities of spiral columns using an artificial neural network	100878
Moghtadernejad, Saviz / Mirza, M. Saeed / Chouinard, Luc E.	Determination of the fuzzy measures for multicriteria and optimal design of a building façade using Choquet integrals	100877
Demis, Sotiris / Papadakis, Vagelis G.	Durability design process of reinforced concrete structures - Service life estimation, problems and perspectives	100876
Garay Martinez, Roberto / Chemisana, Daniel / Arrien, Amaia Uriarte	Dynamic performance assessment of multidimensional heat transfer in buildings	100893
Cree, Duncan / Pliya, Prosper	Effect of elevated temperature on eggshell, eggshell powder and eggshell powder mortars for masonry applications	100852
Pachideh, Ghasem / Gholhaki, Majid	Effect of pozzolanic materials on mechanical properties and water absorption of autoclaved aerated concrete	100856
Saedi, Mohammad / Behfarnia, Kiachehr / Soltanian, Hamid	The effect of the blaine fineness on the mechanical properties of the alkali-activated slag cement	100897
Sahraoui, M. / Bouziani, T.	Effects of fine aggregates types and contents on rheological and fresh properties of SCC	100890
Pandey, Arunabh / Kumar, Brind	Effects of rice straw ash and micro silica on mechanical properties of pavement quality concrete	100889
Parhizkar, Tarannom / Aramoun, Fereshteh / Esbati, Saeed / Saboohi, Yadollah	Efficient performance monitoring of building central heating system using Bayesian Network method	100835
Kumar, Sumit / Dutta, Sekhar Chandra	An effort towards constructing building structures on backfilled soil	100891
Huang, Zhide / Xie, Mowen / Chen, Chen / Du, Yan / Zhao, Jinhui	Engineering application of a safety-state evaluation model for hidden frame-supported glass curtain walls based on remote vibration	100915
Dewi, Sri Murni / Munawir, As'ad	Enhancing bamboo reinforcement using a hose-clamp to increase bond-stress and slip resistance	100896
Pierobon, Francesca / Huang, Monica / Simonen, Kathrina / Ganguly, Indroneil	Environmental benefits of using hybrid CLT structure in midrise non-residential construction: An LCA based comparative case study in the U.S. Pacific Northwest	100862
Yucel, Melda / Bekdaş, Gebrail / Nigdeli, Sinan Melih / Sevgen, Selcuk	Estimation of optimum tuned mass damper parameters via machine learning	100847
Heracleous, C. / Michael, A.	Experimental assessment of the impact of natural ventilation on indoor air quality and thermal comfort conditions of educational buildings in the Eastern Mediterranean region during the heating period	100917
Rafsanjani, Hamed Nabizadeh / Ghahramani, Ali	Extracting occupants' energy-use patterns from Wi-Fi networks in office buildings	100864
Piroozfar, Poorang / Farr, Eric R. P. / Zadeh, Amir H. M. / Timoteo Inacio, Sonia / Kilgallon, Steven / Jin, Ruoyu	Facilitating Building Information Modelling (BIM) using Integrated Project Delivery (IPD): A UK perspective	100907
Gautam, Basudev / Rijal, Hom Bahadur / Shukuya, Masanori / Imagawa, Hikaru	A field investigation on the wintry thermal comfort and clothing adjustment of residents in traditional Nepalese houses	100886
Zareei, Seyed Alireza / Ameri, Farshad / Bahrami, Nasrollah / Shoaei, Parham / Musaeei, Hamid Reza / Nurian, Foad	Green high strength concrete containing recycled waste ceramic aggregates and waste carpet fibers: Mechanical, durability, and microstructural properties	100914
Seyam, Shaimaa	The impact of greenery systems on building energy: Systematic review	100887
Valinejadshoubi, Masoud / Heidari, Sahar / Zamani, Pantea	The impact of temperature difference of the sunny and shady yards on the natural ventilation of the vernacular buildings	100880
Fedorik, F. / Heiskanen, R. / Laukkarinen, A. / Vinha, J.	Impacts of multiple refurbishment strategies on hygrothermal behaviour of basement walls	100902
Yin, Peng / Pate, Michael / Battaglia, Francine	In-field performance evaluation and economic analysis of residential ground source heat pumps in heating operation	100932
Tapia-Hernández, Edgar / García-Carrera, Salvador	Inelastic response of ductile eccentrically braced frames	100903
Alotaibi, Sorour / Chakroun, Walid / Habchi, Carine / Ghali, Kamel / Ghaddar, Nesreen	Influence of mixed and displacement air distribution systems' design on concentrations of micro-particles emitted from floor or generated by breathing	100855
de Oliveira Junior, André Luis / Pedroti, Leonardo Gonçalves / de Assis Oliveira, Jaqueline / Hilarino Fernandes, Wellington Emílio / Fineza, Adonai Gomes / Monteiro, Sergio Neves / Nalon, Gustavo Henrique	The influence of partial replacement of natural sand aggregates by grits residues on the mechanical properties of an ecological mortar	100912
Sedaghatdoost, Arash / Behfarnia, Kiachehr / Bayati, Mohammad / Vaezi, Mohammad Sadegh	Influence of recycled concrete aggregates on alkali-activated slag mortar exposed to elevated temperatures	100871
Ren, Guangying / Heo, Yeonsook / Sunikka-Blank, Minna	Investigating an adequate level of modelling for retrofit decision-making: A case study of a British semi-detached house	100837
Bilal, Muhammad / Oyedele, Lukumon O. / Kusimo, Habeeb / Owolabi, Hakeem A. / Akanb, Lukman A. / Ajayi, Anuoluwapo O. / Akinade, Olugbenga O. / Davila Delgado, Juan Manuel	Investigating profitability performance of construction projects using big data: A project analytics approach	100850
Ahmed, Ayaz / Qayoum, Adnan / Mir, Fasil Qayoom	Investigation of the thermal behavior of the natural insulation materials for low temperature regions	100849
Arshadi, Hamed / Kheyroddin, Ali / Naderpour, Hosein	Investigation on the behavior of special moment frames with high-strength reinforcements subjected to cyclic loading	100905
Foraboschi, Paolo	Lateral load-carrying capacity of steel columns with fixed-roller end supports	100879
Taurino, Rosa / Ferretti, Daniele / Cattani, Luca / Bozzoli, Fabio / Bondioli, Federica	Lightweight clay bricks manufactured by using locally available wine industry waste	100892
Foraboschi, Paolo	Masonry does not limit itself to only one structural material: Interlocked masonry versus cohesive masonry	100831
Dizhur, Dmytro / Giaretton, Marta / Giongo, Ivan / Walsh, Kevin Q. / Ingham, Jason M.	Material property testing for the refurbishment of a historic URM building in Yangon, Myanmar	100858
Nadhari, Wan Noor Aidawati Wan / Danish, Mohammed / Nasir, Muhammad Syafiq Ridhwan Mohd / Geng, Boon Jia	Mechanical properties and dimensional stability of particleboard fabricated from steam pre-treated banana trunk waste particles	100848
Simo-Tagne, Merlin / Ndukwu, Macmanus Chinenye / Rogaume, Yann	Modelling and numerical simulation of hygrothermal transfer through a building wall for locations subjected to outdoor conditions in Sub-Saharan Africa	100901
Zhou, Yuekuan / Zheng, Siqian / Zhang, Guoqiang	Multivariable optimisation of a new PCMs integrated hybrid renewable system with active cooling and hybrid ventilations	100845
Thomas, C. / Rico, J. / Tamayo, P. / Setién, J. / Ballester, F. / Polanco, J. A.	Neutron shielding concrete incorporating B4C and PVA fibers exposed to high temperatures	100859
Olivito, Renato Sante / Porzio, Saverio	A new multi-control-point pushover methodology for the seismic assessment of historic masonry buildings	100926
Akaf, Hamid Reza / Kohansal, Mohammad Ebrahim / Moshari, Shahab / Gholami, Javad	A novel decision-making method for the prioritization of passive heating systems use; case study: Tehran	100865
Zhou, Xuan / Wang, Bingwen / Liang, Liequan / Yan, Junwei / Pan, Dongmei	An operational parameter optimization method based on association rules mining for chiller plant	100870
Yoon, Yeo Beom / Seo, Byeongmo / Koh, Brian Baewon / Cho, Soolyeon	Performance analysis of a double-skin façade system installed at different floor levels of high-rise apartment building	100900
Singh, Maninder / Saini, Babita / Chalak, H. D.	Performance and composition analysis of engineered cementitious composite (ECC) – A review	100851
Gagnon, Richard / Gosselin, Louis / Armand Decker, Stéphanie	Performance of a sequential versus holistic building design approach using multi-objective optimization	100883
Ajam, L. / Ben El Haj Hassen, A. / Reguigui, N.	Phosphogypsum utilization in fired bricks: Radioactivity assessment and durability	100928
Duan, Shuangping	A predictive model for airflow in a typical solar chimney based on solar radiation	100916
Samara, Kelly / Sun, Mingyu / Cha, Eun Jeong / LaFave, James	Probabilistic modeling and fragility assessment of limestone wall tie connections subjected to wind loads	100884
Sahu, Santosini / Sarkar, Pradip / Davis, Robin	Quantification of uncertainty in compressive strength of fly ash brick masonry	100843
Mustafaraj, Enea / Yardim, Yavuz	Retrofitting damaged unreinforced masonry using external shear strengthening techniques	100913
Singh, Navdeep / Kumar, Pawan / Goyal, Paresh	Reviewing the behaviour of high volume fly ash based self compacting concrete	100882
Davila Delgado, Juan Manuel / Oyedele, Lukumon / Ajayi, Anuoluwapo / Akanbi, Lukman / Akinade, Olugbenga / Bilal, Muhammad / Owolabi, Hakeem	Robotics and automated systems in construction: Understanding industry-specific challenges for adoption	100868
Kafodya, Innocent / Okonta, F. / Kloukinas, Panos	Role of fiber inclusion in adobe masonry construction	100904
Abd-Elhamed, Ayman / Mahmoud, Sayed	Simulation analysis of TMD controlled building subjected to far- and near-fault records considering soil-structure interaction	100930
Islam, Shriful / Hoque, N. M. Robiul / Hoque, M. Aminul / Mishra, Partha N. / Mamun, M. M. H. / Dey, Susmita	Strength development in fine-grained paddy field soil by lime addition	100857
Alshehri, Faisal / Beck, Stephen / Ingham, Derek / Ma, Lin / Pourkashanian, Mohammed	Techno-economic analysis of ground and air source heat pumps in hot dry climates	100825
Kong, Sih Ying / See, Ziu Hoe / Lee, Chern Leing / Yang, Xu / Wong, Leong Sing / Goh, Teck Shang	Thermal and mechanical properties of mortar incorporated with paraffin/palm oil fuel ash composite	100923
Gasparri, Eugenia / Aitchison, Mathew	Unitised timber envelopes. A novel approach to the design of prefabricated mass timber envelopes for multi-storey buildings	100898
Makul, Natt	Utilization of microwave-accelerated heating and dewatering in low-pressure conditions to accelerated-cure Type-I cement paste for early-age compressive strength development	100920

About this
data sheet
IssueID
28468
Published on:
28/06/2019
Last updated on:
26/07/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Journal of Building Engineering - November 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Journal of Building Engineering - November 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.