Journal of Building Engineering - January 2018

Published:	January 2018

Author(s)	Title	Page(s)
Barg, Steve / Flager, Forest / Fischer, Martin	An analytical method to estimate the total installed cost of structural steel building frames during early design	41-50
Lang, Dominik H. / Kumar, Amit / Sulaymanov, Sulaymon / Meslem, Abdelghani	Building typology classification and earthquake vulnerability scale of Central and South Asian building stock	261-277
Alexandra Morassi, Shandy / Ribeiro da Silva, Júlia Lopes / Ortenzi, Altibano	Comparative result between standard requirements and finite element analysis of wood-frame panels	78-84
Shafigh, Payam / Chai, Lee Jin / Mahmud, Hilmi Bin / Nomeli, Mohammad A.	A comparison study of the fresh and hardened properties of normal weight and lightweight aggregate concretes	252-260
Afram, Abdul / Fung, Alan S. / Janabi-Sharifi, Farrokh / Raahemifar, Kaamran	Development and performance comparison of low-order black-box models for a residential HVAC system	137-155
Yao, Runming / Costanzo, Vincenzo / Li, Xinyi / Zhang, Qiulei / Li, Baizhan	The effect of passive measures on thermal comfort and energy conservation. A case study of the hot summer and cold winter climate in the Yangtze River region	298-310
Samanta, Avik / Pandey, Pranjul	Effects of ground motion modification methods and ground motion duration on seismic performance of a 15-storied building	14-25
Rashidian-Dezfouli, Hassan / Afshinnia, Kaveh / Rangaraju, Prasada Rao	Efficiency of Ground Glass Fiber as a cementitious material, in mitigation of alkali-silica reaction of glass aggregates in mortars and concrete	171-180
Lv, Weihua / Shen, Chong / Li, Xianting	Energy efficiency of an air conditioning system coupled with a pipe-embedded wall and mechanical ventilation	229-235
Aksogan, Orhan / Resatoglu, Rifat / Binici, Hanifi	An environment friendly new insulation material involving waste newsprint papers reinforced by cane stalks	33-40
Hataf, Nader / Sayadi, Mehdi	Experimental and numerical study on the bearing capacity of soils reinforced using geobags	290-297
Moreno, Jose D. / Pellicer, Teresa M. / Adam, José M. / Bonilla, Mercedes	Exposure of RC building structures to the marine environment of the Valencia coast	109-121
Ashish, Deepankar Kumar	Feasibility of waste marble powder in concrete as partial substitution of cement and sand amalgam for sustainable growth	236-242
Mathew, George / Joseph, Benny	Flexural behaviour of geopolymer concrete beams exposed to elevated temperatures	311-317
Košir, Mitja / Gostiša, Tamara / Kristl, Živa	Influence of architectural building envelope characteristics on energy performance in Central European climatic conditions	278-288
Beckett, C. T. S. / Cardell-Oliver, R. / Ciancio, D. / Huebner, C.	Measured and simulated thermal behaviour in rammed earth houses in a hot-arid climate. Part A: Structural behaviour	243-251
Ravi, R. / Rajesh, M. / Thirumalini, S.	Mechanical and physical properties of natural additive dispersed lime	70-77
Srivastava, Manjesh / Kumar, Vikas	The methods of using low cost housing techniques in India	102-108
El-Dieb, Amr S. / El-Ghareeb, Mahmoud A. / Abdel-Rahman, Mohamed A. H. / Nasr, El Sayed A.	Multifunctional electrically conductive concrete using different fillers	61-69
Martani, Claudio / Cattarinussi, Laurent / Adey, Bryan T.	A new process for the evaluation of the net-benefit of flexible ground-floor ceiling in the face of use transition uncertainty	156-170
Bedon, Chiara / Amadio, Claudio	Numerical assessment of vibration control systems for multi-hazard design and mitigation of glass curtain walls	1-13
Estêvão, João M. C. / Barreto, Vítor	Numerical comparative analysis of second order effects of recycled aggregate concrete columns	95-101
Hamdy, Gehan / Kamal, Osama / Al-Hariri, Osama / El-Salakawy, Tarik	Plane and vaulted masonry elements strengthened by different techniques – Testing, numerical modeling and nonlinear analysis	203-217
Yang, Chunsheng / Shen, Weiming / Chen, Qiangqiang / Gunay, Burak	A practical solution for HVAC prognostics: Failure mode and effects analysis in building maintenance	26-32
Zhai, Zhiqiang (John) / Rivas, Jessica	Promoting variable refrigerant flow system with a simple design and analysis tool	218-228
Short, C. Alan	The recovery of natural environments in architecture: Delivering the recovery	328-333
Dutta, Arindam / Samanta, Akash	Reducing cooling load of buildings in the tropical climate through window glazing: A model to model comparison	318-327
Muttashar, Habeeb Lateef / Ariffin, Mohd Azreen Mohd / Hussein, Mohammed Noori / Hussin, Mohd Warid / Ishaq, Shafiq Bin	Self-compacting geopolymer concrete with spend garnet as sand replacement	85-94
Delgarm, Navid / Sajadi, Behrang / Azarbad, Khadijeh / Delgarm, Saeed	Sensitivity analysis of building energy performance: A simulation-based approach using OFAT and variance-based sensitivity analysis methods	181-193
Hazarika, Amrita / Hazarika, Indranuj / Gogoi, Mumee / Bora, Shilpi Shaya / Borah, Rashmi Rekha / Goutam, Prasanta Jyoti / Saikia, Nabajyoti	Use of a plant based polymeric material as a low cost chemical admixture in cement mortar and concrete preparations	194-202
Zhang, Kexin / Sun, Quansheng	The use of Wire Mesh-Polyurethane Cement (WM-PUC) composite to strengthen RC T-beams under flexure	122-136
Barroso, Carlos E. / Oliveira, Daniel V. / Ramos, Luís F.	Vernacular schist farm walls: materials, construction techniques and sustainable rebuilding solutions	334-352
Elias, Said / Matsagar, Vasant	Wind response control of tall buildings with a tuned mass damper	51-60

Author(s)

Title

Page(s)

Barg, Steve / Flager, Forest / Fischer, Martin

An analytical method to estimate the total installed cost of structural steel building frames during early design

41-50

Lang, Dominik H. / Kumar, Amit / Sulaymanov, Sulaymon / Meslem, Abdelghani

Building typology classification and earthquake vulnerability scale of Central and South Asian building stock

261-277

Alexandra Morassi, Shandy / Ribeiro da Silva, Júlia Lopes / Ortenzi, Altibano

Comparative result between standard requirements and finite element analysis of wood-frame panels

78-84

Shafigh, Payam / Chai, Lee Jin / Mahmud, Hilmi Bin / Nomeli, Mohammad A.

A comparison study of the fresh and hardened properties of normal weight and lightweight aggregate concretes

252-260

Afram, Abdul / Fung, Alan S. / Janabi-Sharifi, Farrokh / Raahemifar, Kaamran

Development and performance comparison of low-order black-box models for a residential HVAC system

137-155

Yao, Runming / Costanzo, Vincenzo / Li, Xinyi / Zhang, Qiulei / Li, Baizhan

The effect of passive measures on thermal comfort and energy conservation. A case study of the hot summer and cold winter climate in the Yangtze River region

298-310

Samanta, Avik / Pandey, Pranjul

Effects of ground motion modification methods and ground motion duration on seismic performance of a 15-storied building

14-25

Rashidian-Dezfouli, Hassan / Afshinnia, Kaveh / Rangaraju, Prasada Rao

Efficiency of Ground Glass Fiber as a cementitious material, in mitigation of alkali-silica reaction of glass aggregates in mortars and concrete

171-180

Lv, Weihua / Shen, Chong / Li, Xianting

Energy efficiency of an air conditioning system coupled with a pipe-embedded wall and mechanical ventilation

229-235

Aksogan, Orhan / Resatoglu, Rifat / Binici, Hanifi

An environment friendly new insulation material involving waste newsprint papers reinforced by cane stalks

33-40

Hataf, Nader / Sayadi, Mehdi

Experimental and numerical study on the bearing capacity of soils reinforced using geobags

290-297

Moreno, Jose D. / Pellicer, Teresa M. / Adam, José M. / Bonilla, Mercedes

Exposure of RC building structures to the marine environment of the Valencia coast

109-121

Ashish, Deepankar Kumar

Feasibility of waste marble powder in concrete as partial substitution of cement and sand amalgam for sustainable growth

236-242

Mathew, George / Joseph, Benny

Flexural behaviour of geopolymer concrete beams exposed to elevated temperatures

311-317

Košir, Mitja / Gostiša, Tamara / Kristl, Živa

Influence of architectural building envelope characteristics on energy performance in Central European climatic conditions

278-288

Beckett, C. T. S. / Cardell-Oliver, R. / Ciancio, D. / Huebner, C.

Measured and simulated thermal behaviour in rammed earth houses in a hot-arid climate. Part A: Structural behaviour

243-251

Ravi, R. / Rajesh, M. / Thirumalini, S.

Mechanical and physical properties of natural additive dispersed lime

70-77

Srivastava, Manjesh / Kumar, Vikas

The methods of using low cost housing techniques in India

102-108

El-Dieb, Amr S. / El-Ghareeb, Mahmoud A. / Abdel-Rahman, Mohamed A. H. / Nasr, El Sayed A.

Multifunctional electrically conductive concrete using different fillers

61-69

Martani, Claudio / Cattarinussi, Laurent / Adey, Bryan T.

A new process for the evaluation of the net-benefit of flexible ground-floor ceiling in the face of use transition uncertainty

156-170

Bedon, Chiara / Amadio, Claudio

Numerical assessment of vibration control systems for multi-hazard design and mitigation of glass curtain walls

1-13

Estêvão, João M. C. / Barreto, Vítor

Numerical comparative analysis of second order effects of recycled aggregate concrete columns

95-101

Hamdy, Gehan / Kamal, Osama / Al-Hariri, Osama / El-Salakawy, Tarik

Plane and vaulted masonry elements strengthened by different techniques – Testing, numerical modeling and nonlinear analysis

203-217

Yang, Chunsheng / Shen, Weiming / Chen, Qiangqiang / Gunay, Burak

A practical solution for HVAC prognostics: Failure mode and effects analysis in building maintenance

26-32

Zhai, Zhiqiang (John) / Rivas, Jessica

Promoting variable refrigerant flow system with a simple design and analysis tool

218-228

Short, C. Alan

The recovery of natural environments in architecture: Delivering the recovery

328-333

Dutta, Arindam / Samanta, Akash

Reducing cooling load of buildings in the tropical climate through window glazing: A model to model comparison

318-327

Muttashar, Habeeb Lateef / Ariffin, Mohd Azreen Mohd / Hussein, Mohammed Noori / Hussin, Mohd Warid / Ishaq, Shafiq Bin

Self-compacting geopolymer concrete with spend garnet as sand replacement

85-94

Delgarm, Navid / Sajadi, Behrang / Azarbad, Khadijeh / Delgarm, Saeed

Sensitivity analysis of building energy performance: A simulation-based approach using OFAT and variance-based sensitivity analysis methods

181-193

Hazarika, Amrita / Hazarika, Indranuj / Gogoi, Mumee / Bora, Shilpi Shaya / Borah, Rashmi Rekha / Goutam, Prasanta Jyoti / Saikia, Nabajyoti

Use of a plant based polymeric material as a low cost chemical admixture in cement mortar and concrete preparations

194-202

Zhang, Kexin / Sun, Quansheng

The use of Wire Mesh-Polyurethane Cement (WM-PUC) composite to strengthen RC T-beams under flexure

122-136

Barroso, Carlos E. / Oliveira, Daniel V. / Ramos, Luís F.

Vernacular schist farm walls: materials, construction techniques and sustainable rebuilding solutions

334-352

Elias, Said / Matsagar, Vasant

Wind response control of tall buildings with a tuned mass damper

51-60

Advertisement

Journal of Building Engineering - January 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Journal of Building Engineering - January 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.