Journal of Building Engineering - July 2018

Published:	July 2018

Articles in this Issue

Author(s)	Title	Page(s)
Nolting, Lars / Steiger, Simone / Praktiknjo, Aaron	Assessing the validity of European labels for energy efficiency of heat pumps	476-486
Krarti, Moncef / Dubey, Kankana	Benefits of energy efficiency programs for residential buildings in Bahrain	40-50
Dabaieh, Marwa / Johansson, Erik	Building Performance and Post Occupancy Evaluation for an off-grid low carbon and solar PV plus-energy powered building. A case from the Western Desert in Egypt	418-428
Allahverdi, Ali / Maleki, Afsaneh / Mahinroosta, Mostafa	Chemical activation of slag-blended Portland cement	76-83
D'Altri, Antonio Maria / Castellazzi, Giovanni / de Miranda, Stefano	Collapse investigation of the Arquata del Tronto medieval fortress after the 2016 Central Italy seismic sequence	245-251
Colaco, A. M. / Colaco, S. G. / Kurian, C. P. / Kini, Savitha G.	Color characterization of multicolor multichip LED luminaire for indoor	19-32
Ahmad, Rehab M. / Reffat, Rabee M.	A comparative study of various daylighting systems in office buildings for improving energy efficiency in Egypt	360-376
Jani, D. B. / Mishra, Manish / Sahoo, Pradeep Kumar	A critical review on application of solar energy as renewable regeneration heat source in solid desiccant – vapor compression hybrid cooling system	107-124
Bhatnagar, Mayank / Mathur, Jyotirmay / Garg, Vishal	Determining base temperature for heating and cooling degree-days for India	270-280
Tucker, Matthew / Masuri, Mohd Rayme Anang	The development of facilities management-development process (FM-DP) integration framework	377-385
Masuka, Shamiso / Gwenzi, Willis / Rukuni, Tungamirai	Development, engineering properties and potential applications of unfired earth bricks reinforced by coal fly ash, lime and wood aggregates	312-320
Mahamid, Mustafa / Houshiar, Majid	Direct design method and design diagrams for reinforced concrete columns and shear walls	66-75
Godbole, Siddhesh / Lam, Nelson / Mafas, Mohamed / Fernando, Saman / Gad, Emad / Hashemi, Javad	Dynamic loading on a prefabricated modular unit of a building during road transportation	260-269
Dwaikat, Luay N. / Ali, Kherun N.	The economic benefits of a green building – Evidence from Malaysia	448-453
Mazzoli, A. / Corinaldesi, V. / Donnini, J. / Di Perna, C. / Micheli, D. / Vricella, A. / Pastore, R. / Bastianelli, L. / Moglie, F. / Mariani Primiani, V.	Effect of graphene oxide and metallic fibers on the electromagnetic shielding effect of engineered cementitious composites	33-39
Trompetter, W. J. / Boulic, M. / Ancelet, T. / Garcia-Ramirez, J. C. / Davy, P. K. / Wang, Y. / Phipps, R.	The effect of ventilation on air particulate matter in school classrooms	164-171
De Silva, G. H. M. J. Subashi / Perera, B. V. A.	Effect of waste rice husk ash (RHA) on structural, thermal and acoustic properties of fired clay bricks	252-259
Ge, Jian / Wu, Jiajing / Chen, Shuqin / Wu, Jindong	Energy efficiency optimization strategies for university research buildings with hot summer and cold winter climate of China based on the adaptive thermal comfort	321-330
Haghshenaskashani, Samira / Sajadi, Behrang	Evaluation of thermal comfort, IAQ and energy consumption in an impinging jet ventilation (IJV) system with/without ceiling exhaust	142-153
Xiong, Houren / Xu, Jinming / Yuan, Kelong	Experimental study on the temperature field of ETICS cladding system with finishing colorful steel plate	438-447
Dong, Lihui / Chen, Xiyuan / Wang, Zhenbin / Zhang, Zheyu	Factors affecting overall and local temperature distribution in aircraft cabins	125-129
Mishra, Rajesh	FEM based prediction of 3D woven fabric reinforced concrete under mechanical load	95-106
Dwaikat, Luay N. / Ali, Kherun N.	Green buildings life cycle cost analysis and life cycle budget development: Practical applications	303-311
Tukia, Toni / Uimonen, Semen / Siikonen, Marja-Liisa / Donghi, Claudio / Lehtonen, Matti	High-resolution modeling of elevator power consumption	210-219
Zeng, Cheng / Liu, Shuli / Shukla, Ashish / Yang, Benqiang	Identifying the occupant's satisfaction and awareness for the performance of Eco houses in the United Kingdom	281-291
Ibrahim, Mohamad / Bianco, Lorenza / Ibrahim, Oussama / Wurtz, Etienne	Low-emissivity coating coupled with aerogel-based plaster for walls' internal surface application in buildings: Energy saving potential based on thermal comfort assessment	454-466
Gui, Xue-chen / Ma, Yi-teng / Chen, Shu-qin / Ge, Jian	The methodology of standard building selection for residential buildings in hot summer and cold winter zone of China based on architectural typology	352-359
Sharma, Ashutosh / Mittal, Hemant / Gairola, Ajay	Mitigation of wind load on tall buildings through aerodynamic modifications: Review	180-194
Mangkuto, Rizki A. / Feradi, Fathurrahman / Putra, Rialdi Eka / Atmodipoero, R. Triyogo / Favero, Federico	Optimisation of daylight admission based on modifications of light shelf design parameters	195-209
Ahadi, Amin alah / Saghafi, Mahmoud Reza / Tahbaz, Mansoureh	The optimization of light-wells with integrating daylight and stack natural ventilation systems in deep-plan residential buildings: A case study of Tehran	220-244
Subhashini, S. / Thirumaran, K.	A passive design solution to enhance thermal comfort in an educational building in the warm humid climatic zone of Madurai	395-407
Raj S., Saranya / Sharma, Anil Kumar / Anand, K. B.	Performance appraisal of coal ash stabilized rammed earth	51-57
Touma, Albert Al / Ouahrani, Djamel	Quantifying savings in spaces energy demands and CO 2 emissions by shading and lighting controls in the Arabian Gulf	429-437
Hassanzadeh, Rahim / Khalili, Mehran	Replacing the wet cooling tower with a ground source heat exchanger as a clean technology	331-342
Dewey, Justin / Tuladhar, Rabin / Sivakugan, Nagaratnam	Review of design methods for round notched timber sections subjected to flexure and shear	130-141
Mittal, Hemant / Sharma, Ashutosh / Gairola, Ajay	A review on the study of urban wind at the pedestrian level around buildings	154-163
Kavaklioglu, Kadir	Robust modeling of heating and cooling loads using partial least squares towards efficient residential building design	467-475
Zhao, Fu-Yun / Shen, Guang / Liu, Ke-Jun / Xu, Ying / Liu, Di / Wang, Han-Qing	Room airborne pollutant separation by the use of air curtains in the large building enclosure: Infiltration efficiency and partial enclosure ventilation rate	386-394
Sghiouri, Haitham / Mezrhab, Ahmed / Karkri, Mustapha / Naji, Hassane	Shading devices optimization to enhance thermal comfort and energy performance of a residential building in Morocco	292-302
Yin, Xunzhi / Lawrence, Mike / Maskell, Daniel	Straw bale construction in northern China – Analysis of existing practices and recommendations for future development	408-417
Araji, Mohamad T. / Shahid, Iqbal	Symbiosis optimization of building envelopes and micro-algae photobioreactors	58-65
Lv, Liugen / Luo, Yiying / Huang, Chen	A synchronizing thermal model based on three kinds of radiant models to compute interior air temperature and interior wall temperature	343-351
Bodian, Séckou / Faye, Mactar / Sene, Ndeye Awa / Sambou, Vincent / Limam, Oualid / Thiam, Ababacar	Thermo-mechanical behavior of unfired bricks and fired bricks made from a mixture of clay soil and laterite	172-179
Salama, Ahmed E. / Kassem, Magdy E. / Mahmoud, Ahmed A.	Torsional behavior of T- shaped reinforced concrete beams with large web openings	84-94
Bellia, Laura / Borrelli, Martina / De Masi, Rosa Francesca / Ruggiero, Silvia / Vanoli, Giuseppe Peter	University building: Energy diagnosis and refurbishment design with cost-optimal approach. Discussion about the effect of numerical modelling assumptions	1-18

About this
data sheet
IssueID
16998
Published on:
01/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Journal of Building Engineering - July 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Journal of Building Engineering - July 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.