International Journal of Concrete Structures and Materials - v. 14, n. 1 (January 2020)

Published:	January 2020

Articles in this Issue

Author(s)	Title	Page(s)
Li, Shichang / Yin, Shiping / Gao, Yu	Analysis of Interface Properties Between TRC and Concrete Under Chloride Attack Based on Fracture Energy
Diab, Hesham M. / Sayed, Ahmed M.	An Anchorage Technique for Shear Strengthening of RC T-Beams Using NSM-BFRP Bars and BFRP Sheet
Lee, Jaeha / Lopez, Maria	Application of Frictional Bond-Slip Model to Large-Scale FRP-Strengthened T-Beams with U-wraps
Liu, Yanming / Shi, Tao / Zhao, Yujing / Gu, Yuan / Zhao, Zhifang / Chen, Jiabin / Zheng, Bingmiao / Shi, Shichong	Autogenous Shrinkage and Crack Resistance of Carbon Nanotubes Reinforced Cement-Based Materials
Ryu, Eunmi / Kang, Jewon / Lee, Jieun / Shin, Yeongsoo / Kim, Heesun	Automated Detection of Surface Cracks and Numerical Correlation with Thermal-Structural Behaviors of Fire Damaged Concrete Beams
Baasankhuu, Batzaya / Choi, Donguk / Ha, Sangsu	Behavior of Small-Scale Concrete Cylinders in Compression Laterally Confined by Basalt Fiber and PEN Fiber Reinforced Polymer Composites
Zou, Xingxing / Sneed, Lesley H.	Bond Behavior Between Steel Fiber Reinforced Polymer (SRP) and Concrete
Liu, Xia / Wang, Xin / Xie, Kangyu / Wu, Zhishen / Li, Feng	Bond Behavior of Basalt Fiber-Reinforced Polymer Bars Embedded in Concrete Under Mono-tensile and Cyclic Loads
Figueira, Diogo / Sousa, Carlos / Serra Neves, Afonso	Constitutive Model for Aggregate Interlock in FEM Analyses of Concrete Interfaces with Embedded Steel Bars
Huang, Ruiyuan / Li, Shichao / Meng, Long / Jiang, Dong / Li, Ping	Coupled Effect of Temperature and Strain Rate on Mechanical Properties of Steel Fiber-Reinforced Concrete
Bhosale, Aniket B. / Prakash, S. Suriya	Crack Propagation Analysis of Synthetic vs. Steel vs. Hybrid Fibre-Reinforced Concrete Beams Using Digital Image Correlation Technique
Jo, Jun Ho / Jo, Byung Wan / Cho, Woohyun / Kim, Jung-Hoon	Development of a 3D Printer for Concrete Structures: Laboratory Testing of Cementitious Materials
Nabilah, Abu Bakar / Koh, Chan Ghee / Izian, Abd. Karim / Abd. Aziz, Farah Nora Aznieta	Development of Finite Element Analysis for Intermediate Length Coupling Beams Considering Bond-Slip Interface
Ibrahim, Mohammed / Ahmad, Aftab / Barry, Mohammed S. / Alhems, Luai M. / Mohamed Suhoothi, A. C.	Durability of Structural Lightweight Concrete Containing Expanded Perlite Aggregate
Zhang, Na / Zhou, Jian / Ma, Guo-Wei	Dynamic Properties of Strain-Hardening Cementitious Composite Reinforced with Basalt and Steel Fibers
Lee, Jong-Won / Jang, Young-Il / Park, Wan-Shin / Yun, Hyun-Do / Kim, Sun-Woo	The Effect of Fly Ash and Recycled Aggregate on the Strength and Carbon Emission Impact of FRCCs
Hwang, Hyeon-Jong / Yang, Fan / Zang, Li / Baek, Jang-Woon / Ma, Gao	Effect of Impact Load on Splice Length of Reinforcing Bars
Li, Huabing / Zuo, Jiandong / Dong, Biqin / Xing, Feng	Effect of Lamellar Inorganic Fillers on the Properties of Epoxy Emulsion Cement Mortar
Chrysanidis, Theodoros A.	Evaluation of Out-of-Plane Response of R/C Structural Wall Boundary Edges Detailed with Maximum Code-Prescribed Longitudinal Reinforcement Ratio
Michelini, E. / Bernardi, P. / Cerioni, R. / Belletti, B.	Experimental and Numerical Assessment of Flexural and Shear Behavior of Precast Prestressed Deep Hollow-Core Slabs
Liu, TingJin / Lu, Jiandong / Liu, Hongyuan	Experimental and Numerical Studies on the Mechanical Performance of a Wall-beam-strut Joint with Mechanical Couplers for Prefabricated Underground Construction
Qiu, Minghong / Shao, Xudong / Wille, Kay / Yan, Banfu / Wu, Jiajia	Experimental Investigation on Flexural Behavior of Reinforced Ultra High Performance Concrete Low-Profile T-Beams
Zhao, Jun / Shen, Fuqiang / Si, Chenzhe / Sun, Yuping / Yin, Lu	Experimental Investigation on Seismic Resistance of RC Shear Walls with CFRP Bars in Boundary Elements
Chiu, Cien-Kuo / Tandri, Alexander Ivan	Experimental Investigation on the Force-Crack Quantification Model for HSRC Columns with Flexure–Shear and Shear Failure Modes
Sun, Chong-fang / Liang, Shu-ting / Zhu, Xiao-jun / Li, Hu / Guo, Jian-min / Li, Gang / Song, Ya-min / Wu, Dong-yue	Experimental Study and Numerical Simulation of Precast Shear Wall with Rabbet-Unbonded Horizontal Connection
Chen, Xudong / Shi, Dandan / Guo, Shengshan	Experimental Study on Damage Evaluation, Pore Structure and Impact Tensile Behavior of 10-Year-Old Concrete Cores After Exposure to High Temperatures
Tarquini, Danilo / de Almeida, João Pacheco / Beyer, Katrin	Extended Tension Chord Model for Boundary Elements of RC Walls Accounting for Anchorage Slip and Lap Splices Presence
Cai, Bin / Li, Bo / Fu, Feng	Finite Element Analysis and Calculation Method of Residual Flexural Capacity of Post-fire RC Beams
Li, Zhong-Xian / Du, Chun-yu / Liang, Xiao / Zhao, Bo	Flexural Behavior of Circular Hollow RC Piers with Reduced Amounts of Inner Hoops
Ahmed, Hemn Qader / Jaf, Dilshad Kakasor / Yaseen, Sinan Abdulkhaleq	Flexural Capacity and Behaviour of Geopolymer Concrete Beams Reinforced with Glass Fibre-Reinforced Polymer Bars
Ge, Wenjie / Ashour, Ashraf F. / Lu, Weigang / Cao, Dafu	Flexural Performance of Steel Reinforced ECC-Concrete Composite Beams Subjected to Freeze–Thaw Cycles
Lv, Yujing / Zhang, Wenhua / Wu, Fan / Li, Huang / Zhang, Yunsheng / Xu, Guodong	Influence of Initial Damage Degree on the Degradation of Concrete Under Sulfate Attack and Wetting–Drying Cycles
Liu, Ruyan / Chi, Yin / Chen, Shengyun / Jiang, Qinghui / Meng, Xiaoyu / Wu, Kun / Li, Shengjia	Influence of Pore Structure Characteristics on the Mechanical and Durability Behavior of Pervious Concrete Material Based on Image Analysis
Zhao, Yu / Cao, Xiaozhe / Zhou, Yongjun / Wang, Gangqiang / Tian, Ruixin	Lateral Load Distribution for Hollow Slab Bridge: Field Test Investigation
Alaloul, Wesam Salah / John, Vivekka Olivia / Musarat, Muhammad Ali	Mechanical and Thermal Properties of Interlocking Bricks Utilizing Wasted Polyethylene Terephthalate
Liu, Haifeng / Chen, Xiaolong / Che, Jialing / Liu, Ning / Zhang, Minghu	Mechanical Performances of Concrete Produced with Desert Sand After Elevated Temperature
Kim, Taewan / Kang, Choonghyun	The Mechanical Properties of Alkali-Activated Slag-Silica Fume Cement Pastes by Mixing Method
Wu, Di / Hou, Wentao / Liu, Shuai / Liu, Huaibin	Mechanical Response of Barricade to Coupled THMC Behavior of Cemented Paste Backfill
Huang, Qian / Zhao, Liang / Zhao, Chenggong / Liu, Dongsheng / Wang, Chaoqiang	Microstructure Change of Nanosilica–Cement Composites Partially Exposed to Sulfate Attack
Manzi, Stefania / Saccani, Andrea / Baldazzi, Luca / Lancellotti, Isabella	Mix-design and Properties of Mortars from Alkali-activated Fly Ashes Containing High Amounts of Unburned Carbon Matter
Cui, Liang / Fall, Mamadou	Numerical Simulation of Consolidation Behavior of Large Hydrating Fill Mass
Samarakoon, S. M. Samindi M. K. / Hodne, Bjarte	Parametric Study of Different Unbonded Tendon Layouts in Pre-stressed Concrete Flat Plates
Kim, Yong-Hyok / Park, Cho-Bum / Choi, Byoung Il / Shin, Tae Yong / Jun, Yubin / Kim, Jae Hong	Quantitative Measurement of Water Absorption of Coarse Lightweight Aggregates in Freshly-Mixed Concrete
Zhang, Rongling / Liu, Peng / Ma, Lina / Yang, Zijiang / Chen, Huisu / Zhu, Han Xing / Xiao, Huigang / Li, Jia	Research on the Corrosion/Permeability/Frost Resistance of Concrete by Experimental and Microscopic Mechanisms Under Different Water–Binder Ratios
Yamato, Koichiro / Sasaki, Akira / Ito, Takayasu / Yoshitake, Isamu	Resistance Properties to Chloride Ingress of Standard-Cured Concrete Made with an Admixture Incorporating Rich SiO2 and Al2O3
Aili, Abudushalamu / Maruyama, Ippei	Review of Several Experimental Methods for Characterization of Micro- and Nano-Scale Pores in Cement-Based Material
Nahar, Tahmina Tasnim / Cao, Anh-Tuan / Kim, Dookie	Risk Assessment of Aged Concrete Gravity Dam Subjected to Material Deterioration Under Seismic Excitation
Yuan, Tian-Feng / Yoo, Doo-Yeol / Yang, Jun-Mo / Yoon, Young-Soo	Shear Capacity Contribution of Steel Fiber Reinforced High-Strength Concrete Compared with and without Stirrup
Hashim, Doaa Talib / Hejazi, Farzad / Yen Lei, Voo	Simplified Constitutive and Damage Plasticity Models for UHPFRC with Different Types of Fiber
Choi, Seung-Ho / Hwang, Jin-Ha / Han, Sun-Jin / Cho, Hae-Chang / Kim, Jae Hyun / Kim, Kang Su	Simplified Effective Compressive Strengths of Columns with Intervening Floor Slabs
Liu, Bin / Fan, Wei / Huang, Xu / Shao, Xudong / Kang, Lijing	A Simplified Method to Predict Damage of Axially-Loaded Circular RC Columns Under Lateral Impact Loading
Huang, Jie / Shi, Jun / Xiao, Hengheng / Shen, Jiyang / Yang, Baisong	Stressing State Analysis of Reinforcement Concrete Beams Strengthened with Carbon Fiber Reinforced Plastic
Ghosn, Samer / Cherkawi, Nour / Hamad, Bilal	Studies on Hemp and Recycled Aggregate Concrete
Lei, Bin / Li, Wengui / Liu, Huajian / Tang, Zhuo / Tam, Vivian W. Y.	Synergistic Effects of Polypropylene and Glass Fiber on Mechanical Properties and Durability of Recycled Aggregate Concrete
Askandar, Nasih Habeeb / Mahmood, Abdulkareem Darweesh	Torsional Strengthening of RC Beams with Continuous Spiral Near-Surface Mounted Steel Wire Rope
Climent-Llorca, Miguel Ángel / Miró-Oca, Marina / Poveda-Martínez, Pedro / Ramis-Soriano, Jaime	Use of Higher-Harmonic and Intermodulation Generation of Ultrasonic Waves to Detecting Cracks due to Steel Corrosion in Reinforced Cement Mortar

About this
data sheet
IssueID
35899
Published on:
10/01/2020
Last updated on:
10/01/2020

Advertisement