Frattura ed Integrità Strutturale - v. 17, n. 65 (June 2023)

Published:	June 2023

Author(s)	Title	Page(s)
Wang, Lin	Automatic detection of concrete cracks from images using Adam-SqueezeNet deep learning model	289-299
Namdar, Abdoullah / Karimpour-Fard, Mehran / Mughieda, Omer / Berto, Filippo / Muhammad, Nurmunira	Crack simulation for the cover of the landfill – A seismic design	112-134
Mettanadi, Andre Hartawan / Prabowo, Aditya Rio / Kusharjanta, Bambang / Muttaqie, Teguh / Laksono, Fajar Budi / Nubli, Haris	Crashworthiness performance of the designed concave hexagonal structures as filler element in cylindrical shell in multiple load cases	135-159
Sassu, Mauro / Puppio, Mario Lucio / Safabakhsh, Aida	Damage and restoration of historical urban walls: literature review and case of studies	194-207
Pham Bao, Toan / Le-Ngoc, Vien / Vuong Cong, Luan / Ngo Kieu, Nhi	Damage assessment in beam-like structures by correlation of spectrum using machine learning	300-319
Chorfi, Sofiane / Kamel, Fedaoui / Brahim, Necib	Experimental and numerical inspection of cracks in ferrule cracking of BK1 cement crusher	47-58
Ahmad, Seleem / Ali, Esraa / Moawad, Mohamed / Elemam, Hesham	Experimental and numerical investigation the effect of concrete strength and area of steel reinforcement on mechanical performance of functionally graded reinforced concrete beams	270-288
Patel, Paresh / Joshi, Digesh / Makawana, Rinkesh	Experimental studies to evaluate tensile and bond strength of Stainless-Steel Wire Mesh (SSWM)	257-269
Iziumova, Anastasia / Maxim Zhelnin, Maxim Zhelnin / Anastasia Kostina, Anastasia Kostina / Aleksei Vshivkov, Aleksei Vshivkov / Elena Gachegova, Elena Gachegova / Oleg Plekhov, Oleg Plekhov / Swaroop, S.	Fatigue life investigation of notched TC4 specimens subjected to different patterns of laser shock peening	100-111
Aboul Nour, Louay / Gamal, Mariam / Ghoniem, Amr	Glass Fiber for Improved Behavior of Light Expanded Clay Aggregate Concrete Beams: An Experimental Study	1-16
Ferro, Paolo / Fabrizi, Alberto / Bonollo, Franco / Elsayed, H. S. A. / Berto, Filippo / Savio, Gianpaolo	High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering	246-256
Bahmanabadi, H. / Azadi, Mohammad / Dadashi, A. / Torkian, J. / Parast, M. S. A. / Winter, G. / Grun, F.	Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys	224-245
Lobanov, Dmitriy / Slovikov, Stanislav / Lunegova, Ekaterina	Influence of Internal Technological Defects on the Mechanical Properties of Structural CFRP	74-87
Fakoor, Mahdi / Tabatabaee, Seyed Mohammad Javad	Investigation into effective mechanical properties of porous material produced by the additive manufacturing method	208-223
Ganesh, K. / Hemachandra Reddy, K. / Sudhakar Babu, S. / Suresh, R.	Investigation on Microstructure, Hardness, Wear behavior and Fracture Surface Analysis of Strontium (Sr) and Calcium (Ca) Content A357 Modified Alloy by Statistical Technique	32-46
Joshi, Anant / Gouda, Shivakumar / Sridhar, I. / Umar Farooq, M. A. / Uppin, Vinayak / Maruthi Prashanth, B. H.	Matrix Hybridization Effects on Interlaminar Fracture Toughness of Glass Epoxy Laminates using Nano and Micro fillers	59-73
Uppin, Vinayak / Gouda, Shivakumar / Sridhar, I.	Mechanisms for Introduction of Pseudo Ductility in Fiber Reinforced Polymer Composites- A Review	17-31
Hatti, Gururaj / Lakshmikanthan, Avinash / Naveen, G. J.	Microstructure Characterization, Mechanical and Wear Behavior of Silicon Carbide and Neem Leaf Powder Reinforced AL7075 Alloy hybrid MMC’s.
Xiong, Zhihua / She, Jiachen / Liang, Zhuoxi / Mou, Xulin / Zhang, Yu	Structural Health Evaluation of Arch Bridge by Field Test and Optimized BPNN Algorithm	160-177
Sreenivasa Iyengar, S. R. / Sethuramu, D. / Ravikumar, M.	A Study on Micro-structure, Hardness and Optimization of Wear Characteristics of Al6061/TiB2/CeO2 Hotrolled MMCs using Taguchi Method: Study on Micro-structure, Hardness and Optimization of Wear Characteristics of Al6061/TiB2/CeO2 Hotrolled MMCs using Taguchi Method	178-193

Author(s)

Title

Page(s)

Wang, Lin

Automatic detection of concrete cracks from images using Adam-SqueezeNet deep learning model

289-299

Namdar, Abdoullah / Karimpour-Fard, Mehran / Mughieda, Omer / Berto, Filippo / Muhammad, Nurmunira

Crack simulation for the cover of the landfill – A seismic design

112-134

Mettanadi, Andre Hartawan / Prabowo, Aditya Rio / Kusharjanta, Bambang / Muttaqie, Teguh / Laksono, Fajar Budi / Nubli, Haris

Crashworthiness performance of the designed concave hexagonal structures as filler element in cylindrical shell in multiple load cases

135-159

Sassu, Mauro / Puppio, Mario Lucio / Safabakhsh, Aida

Damage and restoration of historical urban walls: literature review and case of studies

194-207

Pham Bao, Toan / Le-Ngoc, Vien / Vuong Cong, Luan / Ngo Kieu, Nhi

Damage assessment in beam-like structures by correlation of spectrum using machine learning

300-319

Chorfi, Sofiane / Kamel, Fedaoui / Brahim, Necib

Experimental and numerical inspection of cracks in ferrule cracking of BK1 cement crusher

47-58

Ahmad, Seleem / Ali, Esraa / Moawad, Mohamed / Elemam, Hesham

Experimental and numerical investigation the effect of concrete strength and area of steel reinforcement on mechanical performance of functionally graded reinforced concrete beams

270-288

Patel, Paresh / Joshi, Digesh / Makawana, Rinkesh

Experimental studies to evaluate tensile and bond strength of Stainless-Steel Wire Mesh (SSWM)

257-269

Iziumova, Anastasia / Maxim Zhelnin, Maxim Zhelnin / Anastasia Kostina, Anastasia Kostina / Aleksei Vshivkov, Aleksei Vshivkov / Elena Gachegova, Elena Gachegova / Oleg Plekhov, Oleg Plekhov / Swaroop, S.

Fatigue life investigation of notched TC4 specimens subjected to different patterns of laser shock peening

100-111

Aboul Nour, Louay / Gamal, Mariam / Ghoniem, Amr

Glass Fiber for Improved Behavior of Light Expanded Clay Aggregate Concrete Beams: An Experimental Study

1-16

Ferro, Paolo / Fabrizi, Alberto / Bonollo, Franco / Elsayed, H. S. A. / Berto, Filippo / Savio, Gianpaolo

High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering

246-256

Bahmanabadi, H. / Azadi, Mohammad / Dadashi, A. / Torkian, J. / Parast, M. S. A. / Winter, G. / Grun, F.

Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

224-245

Lobanov, Dmitriy / Slovikov, Stanislav / Lunegova, Ekaterina

Influence of Internal Technological Defects on the Mechanical Properties of Structural CFRP

74-87

Fakoor, Mahdi / Tabatabaee, Seyed Mohammad Javad

Investigation into effective mechanical properties of porous material produced by the additive manufacturing method

208-223

Ganesh, K. / Hemachandra Reddy, K. / Sudhakar Babu, S. / Suresh, R.

Investigation on Microstructure, Hardness, Wear behavior and Fracture Surface Analysis of Strontium (Sr) and Calcium (Ca) Content A357 Modified Alloy by Statistical Technique

32-46

Joshi, Anant / Gouda, Shivakumar / Sridhar, I. / Umar Farooq, M. A. / Uppin, Vinayak / Maruthi Prashanth, B. H.

Matrix Hybridization Effects on Interlaminar Fracture Toughness of Glass Epoxy Laminates using Nano and Micro fillers

59-73

Uppin, Vinayak / Gouda, Shivakumar / Sridhar, I.

Mechanisms for Introduction of Pseudo Ductility in Fiber Reinforced Polymer Composites- A Review

17-31

Hatti, Gururaj / Lakshmikanthan, Avinash / Naveen, G. J.

Microstructure Characterization, Mechanical and Wear Behavior of Silicon Carbide and Neem Leaf Powder Reinforced AL7075 Alloy hybrid MMC’s.

Xiong, Zhihua / She, Jiachen / Liang, Zhuoxi / Mou, Xulin / Zhang, Yu

Structural Health Evaluation of Arch Bridge by Field Test and Optimized BPNN Algorithm

160-177

Sreenivasa Iyengar, S. R. / Sethuramu, D. / Ravikumar, M.

A Study on Micro-structure, Hardness and Optimization of Wear Characteristics of Al6061/TiB2/CeO2 Hotrolled MMCs using Taguchi Method: Study on Micro-structure, Hardness and Optimization of Wear Characteristics of Al6061/TiB2/CeO2 Hotrolled MMCs using Taguchi Method

178-193

Advertisement

Frattura ed Integrità Strutturale - v. 17, n. 65 (June 2023)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 17, n. 65 (June 2023)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.