Frattura ed Integrità Strutturale - v. 16, n. 60 (March 2022)

Published:	March 2022

Author(s)	Title	Page(s)
Berrahou, Mohamed / Benzineb, Hayet / Serier, Mohamed	Analysis of the adhesive damage for different shapes and types patch’s in Aircraft Structures corroded with an inclined crack	331-345
Boukhelkhal, Aboubakeur / Kenai, Said	Assessment of fluidity retention, mechanical strength and cost production of blended cement self-compacting concrete using the concept of a performance index	89-101
Gouda, Shivakumar / Joshi, Anant / Sridhar, I. / Umarfarooq, M. A. / Uppin, Vinayak / Vastrad, Jyoti / Gogoi, Nabaneeta / Edacherian, Abhilash	Crack suppression by natural fiber integration for improved interlaminar fracture toughness in fiber hybrid composites	158-173
Vyhlídal, Michal / Rozsypalová, Iva / Šimonová, Hana / Kucharczyková, Barbara / Vavro, Leona / Vavro, Martin / Němeček, Jiří / Rovnaníková, Pavla / Keršner, Zbynĕk	Effect of petrographic composition and chemistry of aggregate on the local and general fracture response of cementitious composites	13-29
Coêlho, Gabriel / Silva, António / Santos, Marco	Elastic surface crack interaction and its engineering critical assessment within the framework of fitness-for-service standards	134-145
Hassani, Nacera / Dehmous, Hocine	Experimental analysis of short concrete column under hygrothermo-mechanical accelerated aging	363-379
Jena, Shakti P. / Bulut, Cihan O. / Kurt, Serpil	Experimental and computational study on dynamic analysis of cracked simply supported structures under moving mass	114-133
Ahmad, Seleem / Graf, Abdo-Alfatah / El-Kholy, Abd El-Monem / Bneni, Mohamed / Elkilani, Ahmed	Experimental and numerical evaluation of compression confinement techniques for HSC beams reinforced with different ratios of high strength steel reinforcement	310-330
Messas, Tidjani / Achoura, Djamel / Abdelaziz, Boutrid / Mamen, Belgacem	Experimental investigation on the mechanical behavior of concrete reinforced with Alfa plant fibers	102-113
D'Angela, Danilo / Ercolino, Marianna	Fatigue crack growth analysis of welded bridge details	265-272
Yarullin, Rustam / Yakovlev, Mikhail	Fatigue growth rate of inclined surface cracks in aluminum and titanium alloys	451-463
Karimihaghighi, Razieh / Naghizadeh, Masoumeh / Javadpour, Sirus	FFS Master Software For Fitness-For-Service Assessment of Hydrogen Induced Cracking Equipment Based on API 579-1/ASME FFS-1	187-212
Awad, Fady / Husain, Mohamed / Fawzy, Khaled	Flexural behaviour of reinforced concrete beams strengthened by NSM technique using ECC	291-309
Sallam, Hossam El-Din M. / Elakhras, Ahmed / Seleem, Mohammad	Fracture toughness of matrix cracked FRC and FGC beams using equivalent TPFM	73-88
Morales, Cindy / Merlin, Mattia / Fortini, Annalisa / Garagnani, Gian Luca / Miranda, Argelia	Impact behaviour of dissimilar AA2024-T351/7075-T651 FSWed butt-joints: effects of Al2O3-SiC particles addition	504-515
Ahmed, Sayed / Atef, Hossam / Husain, Mohamed	Improvement of mechanical properties of railway track concrete sleepers using ultra high performance concrete (UHPC)	243-264
Djellal, Nacira / Mekki, Djamel eddine / Navarro, Elena / Marin, Pilar	Influence of Pr6O11 addition on structural and magnetic properties of mechanically alloyed Fe65Co35 nanoparticles	393-406
Shallan, Osman / Sakr, Thrwat / Khater, Mahmoud / Ahmed Ismail, Ahmed Ismail	Interaction diagram for RC column strengthened by steel angles and strips	1-12
Djeloud, Hamza / Moussaoui, Mustafa / Kellai, Ahmed / Hachi, Dahmane / Berto, Filippo / Bouchouicha, Benattou / Hachi, Brahim Elkhalil	Investigation fatigue crack initiation and propagation cruciform welded joints by extended finite element method (XFEM) and implementation SED approach	346-362
Szabó, Bence / Pásthy, L. / Orosz, Á. / Tamás, K.	The investigation of additive manufacturing and moldable materials to produce railway ballast grain analogs	213-228
Deliou, Adel / Bouchouicha, Benattou	Mechanical behavior of unidirectional composites according different failure criteria	30-42
Med Bouteben, Yasmine / Zeineddine, Boudaoud	Mechanical behaviour of sandy soils embankments treated with cement and reinforced with discrete elements (fibres)	174-186
Gopal Krishna, U. B. / Vasudeva, B. / Auradi, Virupaxi / Nagaral, Madeva	Mechanical Characterization and Tensile Fractography of Al7075-WCP-CoP Composite	283-290
Matallah, Mohammed / Taibi, Abdelsemi / Chimoto, T. T. / Maradzika, F. K.	Mesoscale investigation of mass concrete temperature control systems and their consequences on concrete mechanical behaviour.	416-437
Wang, Lin	Microstructure and anisotropic tensile performance of 316L stainless steel manufactured by selective laser melting	380-391
Bouchelarm, Mohammed A. / Boulenouar, Abdelkader / Chafi, Meriem	Numerical analysis of bonded composite patch efficiency in the case of lateral U and V-notched aluminium panels	62-72
Rivolta, Barbara / Gerosa, Riccardo / Boniardi, Marco / Casaroli, Andrea	On the peak strength of 7050 aluminum alloy: mechanical and corrosion resistance	273-282
Habibi, Samir / Semsoum, Djamel Zddine / Benaissa , Soufiane / Merzouk, Hassen	The proposition of analytical expression HM–(√P/S) in microindentation pile-up deformation mode	407-415
Zekriti, Najat / Majid, Fatima / Rhanim, Rajae / Mrani, Ibrahim / Rhanim, Hassan	PVC failure modelling through experimental and digital image correlation measurements	488-503
Bekhedda, Amine / Merbouh, M’hammed	Recycling of plastic waste polyethylene terephthalate (PET) as a modifier in asphalt mixture: study of Creep-Recovery at Low, Medium, and Hot Temperatures	438-450
Lobanov, Dmitriy / Yankin, Andrey S. / Berdnikova, Nataliya I.	Statistical evaluation of the effect of hygrothermal aging on the interlaminar shear of GFRP	146-157
Greco, Fabrizio / Gaetano, Daniele / Leonetti, Lorenzo / Lonetti, Paolo / Pascuzzo, Arturo / Skrame, Aurora	Structural and seismic vulnerability assessment of the Santa Maria Assunta Cathedral in Catanzaro (Italy): classical and advanced approaches for the analysis of local and global failure mechanisms	464-487
Chate, Ganesh R. / Kulkarni, Raviraj M. / Gowdru Chandrashekarappa, Manjunath Patel / Lakshmikanthan, Avinash / Harsha, H. M. / Tophakhane, Simran / Shaikh, Nazafali / Kongi, Suman / Iranavar, Pouravi	Synthesis and Characterization of Fe2O3 Nanoparticles Reinforced to Recycled Industrial Aluminium Scrap & Waste Aluminium Beverage Cans for Preparing Metal Matrix Nanocomposites	229-242
Guedaoura, Hamda / Hadidane, Yazid	Web post-buckling strength of thin-webbed cellular beams using carbon PFRP profiles	43-61

Author(s)

Title

Page(s)

Berrahou, Mohamed / Benzineb, Hayet / Serier, Mohamed

Analysis of the adhesive damage for different shapes and types patch’s in Aircraft Structures corroded with an inclined crack

331-345

Boukhelkhal, Aboubakeur / Kenai, Said

Assessment of fluidity retention, mechanical strength and cost production of blended cement self-compacting concrete using the concept of a performance index

89-101

Gouda, Shivakumar / Joshi, Anant / Sridhar, I. / Umarfarooq, M. A. / Uppin, Vinayak / Vastrad, Jyoti / Gogoi, Nabaneeta / Edacherian, Abhilash

Crack suppression by natural fiber integration for improved interlaminar fracture toughness in fiber hybrid composites

158-173

Vyhlídal, Michal / Rozsypalová, Iva / Šimonová, Hana / Kucharczyková, Barbara / Vavro, Leona / Vavro, Martin / Němeček, Jiří / Rovnaníková, Pavla / Keršner, Zbynĕk

Effect of petrographic composition and chemistry of aggregate on the local and general fracture response of cementitious composites

13-29

Coêlho, Gabriel / Silva, António / Santos, Marco

Elastic surface crack interaction and its engineering critical assessment within the framework of fitness-for-service standards

134-145

Hassani, Nacera / Dehmous, Hocine

Experimental analysis of short concrete column under hygrothermo-mechanical accelerated aging

363-379

Jena, Shakti P. / Bulut, Cihan O. / Kurt, Serpil

Experimental and computational study on dynamic analysis of cracked simply supported structures under moving mass

114-133

Ahmad, Seleem / Graf, Abdo-Alfatah / El-Kholy, Abd El-Monem / Bneni, Mohamed / Elkilani, Ahmed

Experimental and numerical evaluation of compression confinement techniques for HSC beams reinforced with different ratios of high strength steel reinforcement

310-330

Messas, Tidjani / Achoura, Djamel / Abdelaziz, Boutrid / Mamen, Belgacem

Experimental investigation on the mechanical behavior of concrete reinforced with Alfa plant fibers

102-113

D'Angela, Danilo / Ercolino, Marianna

Fatigue crack growth analysis of welded bridge details

265-272

Yarullin, Rustam / Yakovlev, Mikhail

Fatigue growth rate of inclined surface cracks in aluminum and titanium alloys

451-463

Karimihaghighi, Razieh / Naghizadeh, Masoumeh / Javadpour, Sirus

FFS Master Software For Fitness-For-Service Assessment of Hydrogen Induced Cracking Equipment Based on API 579-1/ASME FFS-1

187-212

Awad, Fady / Husain, Mohamed / Fawzy, Khaled

Flexural behaviour of reinforced concrete beams strengthened by NSM technique using ECC

291-309

Sallam, Hossam El-Din M. / Elakhras, Ahmed / Seleem, Mohammad

Fracture toughness of matrix cracked FRC and FGC beams using equivalent TPFM

73-88

Morales, Cindy / Merlin, Mattia / Fortini, Annalisa / Garagnani, Gian Luca / Miranda, Argelia

Impact behaviour of dissimilar AA2024-T351/7075-T651 FSWed butt-joints: effects of Al2O3-SiC particles addition

504-515

Ahmed, Sayed / Atef, Hossam / Husain, Mohamed

Improvement of mechanical properties of railway track concrete sleepers using ultra high performance concrete (UHPC)

243-264

Djellal, Nacira / Mekki, Djamel eddine / Navarro, Elena / Marin, Pilar

Influence of Pr6O11 addition on structural and magnetic properties of mechanically alloyed Fe65Co35 nanoparticles

393-406

Shallan, Osman / Sakr, Thrwat / Khater, Mahmoud / Ahmed Ismail, Ahmed Ismail

Interaction diagram for RC column strengthened by steel angles and strips

1-12

Djeloud, Hamza / Moussaoui, Mustafa / Kellai, Ahmed / Hachi, Dahmane / Berto, Filippo / Bouchouicha, Benattou / Hachi, Brahim Elkhalil

Investigation fatigue crack initiation and propagation cruciform welded joints by extended finite element method (XFEM) and implementation SED approach

346-362

Szabó, Bence / Pásthy, L. / Orosz, Á. / Tamás, K.

The investigation of additive manufacturing and moldable materials to produce railway ballast grain analogs

213-228

Deliou, Adel / Bouchouicha, Benattou

Mechanical behavior of unidirectional composites according different failure criteria

30-42

Med Bouteben, Yasmine / Zeineddine, Boudaoud

Mechanical behaviour of sandy soils embankments treated with cement and reinforced with discrete elements (fibres)

174-186

Gopal Krishna, U. B. / Vasudeva, B. / Auradi, Virupaxi / Nagaral, Madeva

Mechanical Characterization and Tensile Fractography of Al7075-WCP-CoP Composite

283-290

Matallah, Mohammed / Taibi, Abdelsemi / Chimoto, T. T. / Maradzika, F. K.

Mesoscale investigation of mass concrete temperature control systems and their consequences on concrete mechanical behaviour.

416-437

Wang, Lin

Microstructure and anisotropic tensile performance of 316L stainless steel manufactured by selective laser melting

380-391

Bouchelarm, Mohammed A. / Boulenouar, Abdelkader / Chafi, Meriem

Numerical analysis of bonded composite patch efficiency in the case of lateral U and V-notched aluminium panels

62-72

Rivolta, Barbara / Gerosa, Riccardo / Boniardi, Marco / Casaroli, Andrea

On the peak strength of 7050 aluminum alloy: mechanical and corrosion resistance

273-282

Habibi, Samir / Semsoum, Djamel Zddine / Benaissa , Soufiane / Merzouk, Hassen

The proposition of analytical expression HM–(√P/S) in microindentation pile-up deformation mode

407-415

Zekriti, Najat / Majid, Fatima / Rhanim, Rajae / Mrani, Ibrahim / Rhanim, Hassan

PVC failure modelling through experimental and digital image correlation measurements

488-503

Bekhedda, Amine / Merbouh, M’hammed

Recycling of plastic waste polyethylene terephthalate (PET) as a modifier in asphalt mixture: study of Creep-Recovery at Low, Medium, and Hot Temperatures

438-450

Lobanov, Dmitriy / Yankin, Andrey S. / Berdnikova, Nataliya I.

Statistical evaluation of the effect of hygrothermal aging on the interlaminar shear of GFRP

146-157

Greco, Fabrizio / Gaetano, Daniele / Leonetti, Lorenzo / Lonetti, Paolo / Pascuzzo, Arturo / Skrame, Aurora

Structural and seismic vulnerability assessment of the Santa Maria Assunta Cathedral in Catanzaro (Italy): classical and advanced approaches for the analysis of local and global failure mechanisms

464-487

Chate, Ganesh R. / Kulkarni, Raviraj M. / Gowdru Chandrashekarappa, Manjunath Patel / Lakshmikanthan, Avinash / Harsha, H. M. / Tophakhane, Simran / Shaikh, Nazafali / Kongi, Suman / Iranavar, Pouravi

Synthesis and Characterization of Fe2O3 Nanoparticles Reinforced to Recycled Industrial Aluminium Scrap & Waste Aluminium Beverage Cans for Preparing Metal Matrix Nanocomposites

229-242

Guedaoura, Hamda / Hadidane, Yazid

Web post-buckling strength of thin-webbed cellular beams using carbon PFRP profiles

43-61

Advertisement

Frattura ed Integrità Strutturale - v. 16, n. 60 (March 2022)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 16, n. 60 (March 2022)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.