Frattura ed Integrità Strutturale - v. 15, n. 56 (March 2021)

Published:	March 2021

Author(s)	Title	Page(s)
Mohamed Ben Ali, Amina / Bouziane, Salah / Bouzerd, Hamoudi	Computation of mode I strain energy release rate of symmetrical and asymmetrical sandwich structures using mixed finite element	229-239
Rizvi, Saadat Ali / Ali, Wajahat	Development of mathematical model and optimization of GMA welding parameters of IS 2062 grade A steel weldments	84-93
Wasekar, Milind K. / Khond, Mohan P.	Effect of addition of different reinforcements on the microstructure and mechanical characterization of the Al-Flyash composites	217-228
Boudjemaa, Ismail / Sahli, Abderahmane / Benkhettou, Abdelkader / Benbarek, Smail	Effect of multi-layer prosthetic foam liner on the stresses at the stump–prosthetic interface	187-194
Melais, Saloua / Bouali, Meriem Fakhreddine / Melaikia, Ahmed / Amirat, Amine	Effects of coarse sand dosage on the physic-mechanical behavior of sand concrete	151-159
Staroverov, Oleg / Strungar, Elena / Wildemann, Valery	Evaluation of the survivability of CFRP honeycomb-cored panels in compression after impact tests	1-15
Madqour, Mahmoud / Fawzy, Khaled / Hassan, Hilal	Experimental and analytical investigations of reinforced concrete beams strengthened by different CFRP sheet schemes.	123-136
Bai, Hao / Du, Wei / Shou, Yundong / Chen, Lichuan / Berto, Filippo	Experimental investigation of cracking behaviors of ductile and brittle rock-like materials	16-45
Nehar, Kheira Camellia / Benamara, Dalila	Experimental study and modeling of the mechanical behavior of recycled aggregates-based high-strength concrete	203-216
Benaissa, Soufiane / Habibi, Samir / Semsoum, Djameleddine / Merzouk, Hassen / Mezough, Abdelnou / Boutabout, Benali / Montagne, Alex	Exploitation of static and dynamic methods for the analysis of the mechanical nanoproperties of polymethylmetacrylate by indentation	46-55
Pilone, Daniela / Brotzu, Andrea / Felli, Ferdinando / Ciufolini, Ignazio / Negri, Barbara / Paris, Claudio	Haynes 242 Alloy for Lares 2 Satellite	56-64
Konieczny, Mateusz / Gasiak, Grzegorz / Achtelik, Henryk	Influence of the applied layer on the state of stress in a bimetallic perforated plate under two load variants	137-150
Joshi, Ajith / Basavarajappa, S. / Ellangovan, S. / Jayakumar, B.M	Investigation on influence of SiCp on three-body abrasive wear behaviour of glass/epoxy composites	65-73
Ravikumar, M. / Suresh, R. / Reddappa, H. N. / Ram Mohan, Y. S. / Nagaraja, C. R. / Babu, E. R.	Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques	160-170
Regad, Abdelmalek / Benzerga, Djebara / Berrekia, Habib / Haddi, Abdelkader / Chekhar, Nourredine	Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite	115-122
Eleonsky, Sviatoslav / Pisarev, Vladimir / Zajtsev, Mikhail / Zichenkov, Mikhail / Abdullin, Marat	Residual stresses near cold-expanded hole at different stages of high-cycle fatigue by crack compliance data	171-196
Moulgada, Abdelmadjid / Ait kaci, Djafar / Zagane, Mohammed El Sallah / Abderrahmane, Sahli / Zahi, Rachid	Study of mechanical behavior by fatigue of a cracked plate repaired by different composite patches	195-202
Boulifa, Iliasse / Hadji, Ali	Study of the Influence of Alloying Elements on the Mechanical Characteristics and Wear Behavior of a Ductile Cast Iron	74-83
Hammoum, Hocine / Miloudi, Nassima / Bouzelha, Karima / Aoues, Younes / Amiri, Ouali	Temporal analysis of the performance of an elevated concrete tank considering the corrosion of the steel reinforcement	94-114

Author(s)

Title

Page(s)

Mohamed Ben Ali, Amina / Bouziane, Salah / Bouzerd, Hamoudi

Computation of mode I strain energy release rate of symmetrical and asymmetrical sandwich structures using mixed finite element

229-239

Rizvi, Saadat Ali / Ali, Wajahat

Development of mathematical model and optimization of GMA welding parameters of IS 2062 grade A steel weldments

84-93

Wasekar, Milind K. / Khond, Mohan P.

Effect of addition of different reinforcements on the microstructure and mechanical characterization of the Al-Flyash composites

217-228

Boudjemaa, Ismail / Sahli, Abderahmane / Benkhettou, Abdelkader / Benbarek, Smail

Effect of multi-layer prosthetic foam liner on the stresses at the stump–prosthetic interface

187-194

Melais, Saloua / Bouali, Meriem Fakhreddine / Melaikia, Ahmed / Amirat, Amine

Effects of coarse sand dosage on the physic-mechanical behavior of sand concrete

151-159

Staroverov, Oleg / Strungar, Elena / Wildemann, Valery

Evaluation of the survivability of CFRP honeycomb-cored panels in compression after impact tests

1-15

Madqour, Mahmoud / Fawzy, Khaled / Hassan, Hilal

Experimental and analytical investigations of reinforced concrete beams strengthened by different CFRP sheet schemes.

123-136

Bai, Hao / Du, Wei / Shou, Yundong / Chen, Lichuan / Berto, Filippo

Experimental investigation of cracking behaviors of ductile and brittle rock-like materials

16-45

Nehar, Kheira Camellia / Benamara, Dalila

Experimental study and modeling of the mechanical behavior of recycled aggregates-based high-strength concrete

203-216

Benaissa, Soufiane / Habibi, Samir / Semsoum, Djameleddine / Merzouk, Hassen / Mezough, Abdelnou / Boutabout, Benali / Montagne, Alex

Exploitation of static and dynamic methods for the analysis of the mechanical nanoproperties of polymethylmetacrylate by indentation

46-55

Pilone, Daniela / Brotzu, Andrea / Felli, Ferdinando / Ciufolini, Ignazio / Negri, Barbara / Paris, Claudio

Haynes 242 Alloy for Lares 2 Satellite

56-64

Konieczny, Mateusz / Gasiak, Grzegorz / Achtelik, Henryk

Influence of the applied layer on the state of stress in a bimetallic perforated plate under two load variants

137-150

Joshi, Ajith / Basavarajappa, S. / Ellangovan, S. / Jayakumar, B.M

Investigation on influence of SiCp on three-body abrasive wear behaviour of glass/epoxy composites

65-73

Ravikumar, M. / Suresh, R. / Reddappa, H. N. / Ram Mohan, Y. S. / Nagaraja, C. R. / Babu, E. R.

Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques

160-170

Regad, Abdelmalek / Benzerga, Djebara / Berrekia, Habib / Haddi, Abdelkader / Chekhar, Nourredine

Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite

115-122

Eleonsky, Sviatoslav / Pisarev, Vladimir / Zajtsev, Mikhail / Zichenkov, Mikhail / Abdullin, Marat

Residual stresses near cold-expanded hole at different stages of high-cycle fatigue by crack compliance data

171-196

Moulgada, Abdelmadjid / Ait kaci, Djafar / Zagane, Mohammed El Sallah / Abderrahmane, Sahli / Zahi, Rachid

Study of mechanical behavior by fatigue of a cracked plate repaired by different composite patches

195-202

Boulifa, Iliasse / Hadji, Ali

Study of the Influence of Alloying Elements on the Mechanical Characteristics and Wear Behavior of a Ductile Cast Iron

74-83

Hammoum, Hocine / Miloudi, Nassima / Bouzelha, Karima / Aoues, Younes / Amiri, Ouali

Temporal analysis of the performance of an elevated concrete tank considering the corrosion of the steel reinforcement

94-114

Advertisement

Frattura ed Integrità Strutturale - v. 15, n. 56 (March 2021)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 15, n. 56 (March 2021)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.