Frattura ed Integrità Strutturale - v. 9, n. 34 (September 2015)

Published:	September 2015

Author(s)	Title	Page(s)
Ševík, M. / Huta, P. / Vassilopoulos, A. P. / Shahverdi, M.	Analytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint
Kosteski, L. E. / Soares, F. S. / Iturrioz, I.	Applications of lattice method in the simulation of crack path in heterogeneous materials
Matvienko, Yu. G. / Semenova, M. M.	The concept of the average stress in the fracture process zone for the search of the crack path
Berto, F.	Crack initiation at V-notch tip subjected to in-plane mixed mode loading: An application of the fictitious notch rounding concept
Shanyavskiy, A.	Crack path for run-out specimens in fatigue tests: is it belonging to high- or very-high-cycle fatigue regime?
Judt, P. O. / Ricoeur, A.	Crack path predictions and experiments in plane structures considering anisotropic properties and material interfaces
Pook, L. P.	Crack paths and the linear elastic analysis of cracked bodies
Gates, Nicholas R. / Fatemi, Ali	Crack paths in smooth and precracked specimens subjected to multiaxial cyclic stressing
Schramm, B. / Richard, H. A.	Crack propagation in fracture mechanical graded structures
Caligiuri, Robert D.	Critical crack path assessments in failure investigations
Brighenti, Roberto / Carpinteri, Andrea / Scorza, Daniela	Effect of fibre arrangement on the multiaxial fatigue of fibrous composites: a micromechanical computational model
Žužek, B. / Sedlaek, M. / Podgornik, B.	Effect of segregations on mechanical properties and crack propagation in spring steel
Pokluda, J. / Vojtek, T. / Hohenwarter, A. / Pippan, R.	Effects of microstructure and crystallography on crack path and intrinsic resistance to shear-mode fatigue crack growth
Náhlík, L. / Štegnerová, K. / Huta, P.	Estimation of stepwise crack propagation in ceramic laminates with strong interfaces
Kikuchi, S. / Imai, T. / Kubozono, H. / Nakai, Y. / Ueno, A. / Ameyama, K.	Evaluation of near-threshold fatigue crack propagation in Ti-6Al-4V Alloy with harmonic structure created by Mechanical Milling and Spark Plasma Sintering
Sumi, Y.	Fracture morphology and its evolution A review on crack path stability and brittle fracture along butt-weld
Gallo, P. / Berto, F.	High temperature fatigue tests and crack growth in 40CrMoV13.9 notched components
Nakai, Y. / Shiozawa, D. / Kikuchi, S. / Sato, K. / Obama, T.	In situ observation of rolling contact fatigue cracks by laminography using ultrabright synchrotron radiation
Fischer, C. / Fricke, W.	Influence of local stress concentrations on the crack propagation in complex welded components
Nambu, K. / Egami, N.	Influence of vacuum carburizing treatment on fatigue crack growth characteristic in DSG2
Scorza, Daniela / Carpinteri, Andrea / Fortese, Giovanni / Vantadori, Sabrina / Ferretti, Daniele / Brighenti, Roberto	Investigation of Mode I fracture toughness of red Verona marble after thermal treatment
Lesiuk, G. / Szata, M.	Kinetics of fatigue crack growth and crack paths in the old puddled steel after 100-years operating time
	Life estimation by varying the critical plane orientation in the modified Carpinteri-Spagnoli criterion
Meneghetti, G. / Atzori, B. / Campagnolo, A. / Berto, F.	A link between the peak stresses and the averaged strain energy density for cracks under mixed-mode (I+II) loading
Berto, F.	Local approaches for the fracture assessment of notched components: the research work developed by Professor Paolo Lazzarin
Hos, Y. / Vormwald, M.	Measurement and simulation of crack growth rate and direction under non-proportional loadings
Vo, Thi-Tuyet-Giang / Martinuzzi, Philippe / Tran, Van-Xuan / McLachlan, Neil / Steer, Alan	Modelling 3D crack propagation in ageing graphite bricks of Advanced Gas-cooled Reactor power plant
Marciniak, Z. / Rozumek, D.	Models of initiation fatigue crack paths proposed by Macha
Ivanova, I. / Assih, J.	Static and dynamic experimental study of strengthened inforced short concrete corbel by using carbon fabrics, crack path in shear zone
Campagnolo, A. / Berto, F. / Pook, L. P.	Three-dimensional effects on cracked discs and plates under nominal Mode III loading
Brighenti, Roberto / Carpinteri, Andrea / Corbari, Nicholas	A unified approach for static and dynamic fracture failure in solids and granular materials by a particle method

Author(s)

Title

Page(s)

Ševík, M. / Huta, P. / Vassilopoulos, A. P. / Shahverdi, M.

Analytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint

Kosteski, L. E. / Soares, F. S. / Iturrioz, I.

Applications of lattice method in the simulation of crack path in heterogeneous materials

Matvienko, Yu. G. / Semenova, M. M.

The concept of the average stress in the fracture process zone for the search of the crack path

Berto, F.

Crack initiation at V-notch tip subjected to in-plane mixed mode loading: An application of the fictitious notch rounding concept

Shanyavskiy, A.