Frattura ed Integrità Strutturale - v. 11, n. 42 (September 2017)

Published:	September 2017

Author(s)	Title	Page(s)
Strafella, Alessandra / Coglitore, Antonino / Fabbri, Paride / Salernitano, Elena	15-15Ti(Si) austenitic steel: creep behaviour in hostile environment	352-365
De Santis, Alberto / Iacoviello, Daniela / Di Cocco, Vittorio / Iacoviello, Francesco	Classification of ductile cast iron specimens: a machine learning approach	231-238
Seitl, Stanislav / Ríos, José D. / Cifuentes, Héctor	Comparison of fracture toughness values of normal and high strength concrete determined by three point bend and modified disk-shaped compact tension specimens	56-65
Rozumek, D. / Marciniak, Z.	Crack growth of explosive welding zirconium-steel bimetal subjected to cyclic bending	40-45
Krepl, Ondrej / Klusak, Jan	Crack onset assessment near the sharp material inclusion tip by means of modified maximum tangential stress criterion	66-73
Vasco, Marina C. / Polydoropoulou, Panagiota / Chamos, Apostolos N. / Pantelakis, Spiros G.	Effect of corrosion and sandblasting on the high cycle fatigue behavior of reinforcing B500C steel bars	9-22
Seitl, Stanislav / Miarka, Petr	Evaluation of mixed mode I/II fracture toughness of C 50/60 from Brazilian disc test	119-127
Jadidi, Ali / Amiri, Milad / Zeighami, Ehsanollah	Experimental evaluation of steel fiber effect on mechanical properties of steel fiber-reinforced cement matrix	249-262
Bolzon, G. / Shahmardani, M. / Liu, R. / Zappa, E.	Failure analysis of thin metal foils	328-336
Ferro, P. / Peron, M. / Razavi, S. M. J. / Berto, F. / Torgersen, J.	The fatigue behavior of V-notches in presence of residual stresses: recent developments and future outcomes	189-195
Rozumek, D. / Faszynka, S.	Fatigue crack growth in 2017A-T4 alloy subjected to proportional bending with torsion	23-29
Huffman, P. J. / Ferreira, J. / Correia, J. A. F. O. / de Jesus, A. M. P. / Lesiuk, G. / Berto, F. / Fernández-Canteli, A. / Glinka, G.	Fatigue crack propagation prediction of a pressure vessel mild steel based on a strain energy density model	74-84
Peron, M. / Razavi, S. M. J. / Berto, F. / Torgersen, J. / Colussi, M.	Fracture assessment of magnetostrictive materials	223-230
Khitab, Anwar / Ahmad, Sajjad / Khushnood, Rao Arsalan / Rizwan, Syed Ali / Ferro, Giuseppe Andrea / Restuccia, Luciana / Ali, Mustajab / Mehmood, Imran	Fracture toughness and failure mechanism of high performance concrete incorporating carbon nanotubes	238-248
Davydova, Marina / Panteleev, Ivan / Naimark, Oleg	Fragmentation of Mansurov granite under quasi-static compression	170-180
De Corte, Wouter / Helincks, Peter / Boel, Veerle / Klusak, Jan / Seitl, Stanislav / De Schutter, Geert	Generalised fracture mechanics approach to the interfacial failure analysis of a bonded steel-concrete joint	147-160
Kowalski, M.	Identification of fatigue and mechanical characteristics of explosively welded steel - titanium composite	85-92
Milosevic, Igor / Winter, Gerhard / Grün, Florian / Kober, Martin	Influence of the stress gradient on the fatigue life calculation of a martensitic high strength steel	1-8
Tretyakova, Tatyana V. / Wildemann, Valery E.	Influence the loading conditions and the stress concentrators on the spatial-time inhomogeneity due to the yield delay and the jerky flow: study by using the digital image correlation and the infrared analysis	303-314
Tocci, Marialaura / Pola, Annalisa / Montesano, Lorenzo / Marina La Vecchia, G. / Merlin, Mattia / Garagnani, Gian Luca	Investigation of mechanical properties of AlSi3Cr alloy	337-351
Brotzu, A. / Felli, F. / Pilone, D.	Investigation on some factors affecting crack formation in high resistance aluminum alloys	272-279
Peron, M. / Razavi, S. M. J. / Berto, F. / Torgersen, J. / Mutignani, F.	Local strain energy density for the fatigue assessment of hot dip galvanized welded joints: some recent outcomes	205-213
Peron, M. / Razavi, S. M. J. / Berto, F. / Torgersen, J. / Marsavina, L.	Local strain energy density for the fracture assessment of polyurethane specimens weakened by notches of different shape	214-222
Orlova, Dina V. / Lunev, Alexey G. / Danilova, Lidiya V. / Zuev, Lev B.	Macroscopic criteria for the deformation and fracture of iron based alloys	293-302
Campagnolo, A. / Razavi, S. M. J. / Peron, M. / Torgersen, J. / Berto, F.	Mode II brittle fracture: recent developments	181-188
Pawliczek, R. / Lachowicz, C. T.	Modeling of the stress-strain relationship for specimens made of S355J0 steel subjected to bending block loading with mean load	30-39
Peron, M. / Razavi, S. M. J. / Berto, F. / Torgersen, J.	Notch stress intensity factors under mixed mode loadings: an overview of recent advanced methods for rapid calculation	196-204
Olzak, Miroslaw / Piechna, Janusz / Pyrzanowski, Pawel	Numerical analysis of the influence of liquid on propagation of a rolling contact fatigue crack	46-55
Ruzicka, Vladimir / Malikova, Lucie / Seitl, Stanislav	Over-deterministic method: The influence of rounding numbers on the accuracy of the values of Williams’ expansion terms	128-135
Klon, Jiri / Seitl, Stanislav / Šimonová, Hana / Keršner, Zbynĕk / Kumpová, Ivana / Vavrik, Daniel	Pilot evaluation of a fracture process zone in a modified compact tension specimen by X-ray tomography	161-169
Raposo, P. / Correia, J. A. F. O. / de Jesus, A. M. P. / Calçada, R. A. B.	Probabilistic fatigue S-N curves derivation for notched components	105-118
Correia, J. A. F. O. / de Jesus, A. M. P. / Calçada, R. / Pedrosa, B. / Rebelo, C. / da Silva, Luís Simões	Statistical analysis of fatigue crack propagation data of materials from ancient portuguese metallic bridges	136-146
Testa, Gabriel / Bonora, Nicola / Gentile, Domenico / Ruggiero, Andrew / Iannitti, Gianluca / Carlucci, Antonio / Madi, Yazid	Strain capacity assessment of API X65 steel using damage mechanics	315-327
Carvalho, Hermes / Fakury, Ricardo Hallal / Vilela, Paula Moura Leite	Structural integrity assessment and rehabilitating of Hercilio Luz bridge	93-104
He, Jiang-fu / Yin, Qi-lei / Yin, Kun	Study on the abrasion property of the anvil inside a hydraulic DTH hammer fitted with horizontal oriented sliders	263-271
Nianga, Jean-Marie / Marhabi, Driss	Theoretical model of homogenized piezoelectric materials with small non-collinear periodic cracks	280-292

Author(s)

Title

Page(s)

Strafella, Alessandra / Coglitore, Antonino / Fabbri, Paride / Salernitano, Elena

15-15Ti(Si) austenitic steel: creep behaviour in hostile environment

352-365

De Santis, Alberto / Iacoviello, Daniela / Di Cocco, Vittorio / Iacoviello, Francesco

Classification of ductile cast iron specimens: a machine learning approach

231-238

Seitl, Stanislav / Ríos, José D. / Cifuentes, Héctor

Comparison of fracture toughness values of normal and high strength concrete determined by three point bend and modified disk-shaped compact tension specimens

56-65

Rozumek, D. / Marciniak, Z.

Crack growth of explosive welding zirconium-steel bimetal subjected to cyclic bending

40-45

Krepl, Ondrej / Klusak, Jan

Crack onset assessment near the sharp material inclusion tip by means of modified maximum tangential stress criterion

66-73

Vasco, Marina C. / Polydoropoulou, Panagiota / Chamos, Apostolos N. / Pantelakis, Spiros G.

Effect of corrosion and sandblasting on the high cycle fatigue behavior of reinforcing B500C steel bars

9-22

Seitl, Stanislav / Miarka, Petr

Evaluation of mixed mode I/II fracture toughness of C 50/60 from Brazilian disc test

119-127

Jadidi, Ali / Amiri, Milad / Zeighami, Ehsanollah

Experimental evaluation of steel fiber effect on mechanical properties of steel fiber-reinforced cement matrix

249-262

Bolzon, G. / Shahmardani, M. / Liu, R. / Zappa, E.

Failure analysis of thin metal foils

328-336

Ferro, P. / Peron, M. / Razavi, S. M. J. / Berto, F. / Torgersen, J.

The fatigue behavior of V-notches in presence of residual stresses: recent developments and future outcomes

189-195

Rozumek, D. / Faszynka, S.

Fatigue crack growth in 2017A-T4 alloy subjected to proportional bending with torsion

23-29

Huffman, P. J. / Ferreira, J. / Correia, J. A. F. O. / de Jesus, A. M. P. / Lesiuk, G. / Berto, F. / Fernández-Canteli, A. / Glinka, G.

Fatigue crack propagation prediction of a pressure vessel mild steel based on a strain energy density model

74-84

Peron, M. / Razavi, S. M. J. / Berto, F. / Torgersen, J. / Colussi, M.

Fracture assessment of magnetostrictive materials

223-230

Khitab, Anwar / Ahmad, Sajjad / Khushnood, Rao Arsalan / Rizwan, Syed Ali / Ferro, Giuseppe Andrea / Restuccia, Luciana / Ali, Mustajab / Mehmood, Imran

Fracture toughness and failure mechanism of high performance concrete incorporating carbon nanotubes

238-248

Davydova, Marina / Panteleev, Ivan / Naimark, Oleg

Fragmentation of Mansurov granite under quasi-static compression

170-180

De Corte, Wouter / Helincks, Peter / Boel, Veerle / Klusak, Jan / Seitl, Stanislav / De Schutter, Geert

Generalised fracture mechanics approach to the interfacial failure analysis of a bonded steel-concrete joint

147-160

Kowalski, M.

Identification of fatigue and mechanical characteristics of explosively welded steel - titanium composite

85-92

Milosevic, Igor / Winter, Gerhard / Grün, Florian / Kober, Martin