Engineering Structures - November 2023

Published:	November 2023

Articles in this Issue

Author(s)	Title	Page(s)
Wang, Jianze / Jiang, Yongqing / Huang, Qinyong / Guan, Xingquan / Dai, Kaoshan	An adapted LSTM-DRRNet approach for predicting floor acceleration response spectrum	116849
Kalliontzis, Dimitrios / Kotzamanis, Vasileios	Addressing geometric and material nonlinearities in fluid-structure interaction with the ALE-SSM framework	116851
Zheng, Yanfeng / Wu, Hanwen / Li, Siyuan / Zhang, Jingyao / Yang, Chao / Luo, Yaozhi	Analysis of dynamic process of thick-panel origami structures based on finite particle method	116761
Stiles, John W. / Marshall, Justin D. / Roueche, David / Norred, Culver	Analysis of full-scale wind and pressure measurements on a low-rise frame-supported fabric expedient aircraft hangar	116871
Pang, Li / Jiang, Chong / Zhang, Chaoyang	An analytical method for predicting the soil-structure interaction of axially loaded piles in sands incorporating the two-surface plasticity model	116841
Broyles, Jonathan M. / Hopper, Michael W.	Assessment of the embodied carbon performance of post-tensioned voided concrete plates as a sustainable floor solution in multi-story buildings	116847
Freyssinet, Clément / Rey, Valentine / Schoefs, Franck / Moro, Tanguy	Bayesian calibration of a non linear damage model of steel structures with random material property: Sensitivity analysis and reliability assessment	116853
Liao, JinJing / Zeng, Jun-Jie / Xiang, He-Yi / Dai, Hai-Shuan / Zeng, Wen-Qing / Zhou, Jie-Kai / Zhang, Lihai	Behavior of hybrid FRP-concrete-steel double-skin tubular beams with ultra-high strength concrete and PBL shear connectors under bending	116865
Zhu, Yongmei / Guan, Wei / Wang, Weili / Dong, Cunhao / Zhang, Jian	Buckling performance of stiffened polymer composite cylindrical shell	116848
Nguyen, Truong-Thanh / Sorelli, Luca / Blanchet, Pierre	Composite slab floors made of cross laminated timber and ultra high-performance concrete: Early-age deflection, stripping time, and its implication on the structural performances	116810
Zingoni, Alphose / Kaluba, Chisanga	A consistent group-theoretic transformation for the block-diagonalization of structural matrices	116708
Tripathi, Mayank / Dhakal, Rajesh P.	Constitutive model for reinforcing bars including bar buckling and low-cycle fatigue	116772
Ma, Bin / Zhang, Qian-qing	A critical state three-dimensional multi-shear model for soil-structure interfaces under monotonic and cyclic loading	116866
AbdelAleem, Basem H. / Ismail, Mohamed K. / Hassan, Assem A. A. / El-Dakhakhni, Wael	Cyclic behavior of lightweight engineered cementitious composite beam-column joints	116786
Huang, Jingxiang / Liu, Peng / Yu, Zhiwu / Cheng, Xiang / Zhi, Weiting / Zhang, Sanling	Damage of CRTS III type ballastless track-32 m simply supported girder structural system under long-term deformation effects	116814
Zeng, Cheng / Huang, Jinsong / Wang, Hongrui / Xie, Jiawei / Zhang, Yuting	Deep Bayesian survival analysis of rail useful lifetime	116822
Zhang, Ye / Zhong, Wen / Li, Yanlong / Wen, Lifeng	A deep learning prediction model of DenseNet-LSTM for concrete gravity dam deformation based on feature selection	116827
Kim, Kun-Soo / Park, Ki-Tae / Jung, Kyu-San / Kim, Robin Eunju / Ali, Tabish / Park, Changjin	Development of a novel connection method using expanded rib and spiral bars for reinforced concrete beams with cold joints	116863
Cao, Yingri / Peng, Pan / Wang, Haishen / Sun, Jiangbo / Xiao, Genqi / Zuo, Zhengfa	Development of an innovative three-dimensional vibration isolation bearing	116890
Gao, Zhenguo / Wang, Weichen / Zhou, Zefeng / Yan, Yue / Pradhan, Dhruba L.	Dynamic response of a steel catenary riser at touch-down zone	116839
Longjam, Sonia / Shirai, Kazutaka	Earthquake response control effects of coupled structural systems incorporating a negative stiffness connector: Experimental and numerical investigation	116793
Jin, Liu / Zhang, Jiangxing / Song, Bo / Li, Dong / Li, Ping / Du, Xiuli	Effect of stirrups on shear performance of geometrically-similar reinforced concrete deep beams: An experimental study	116883
He, Shaohua / Yang, Gang / Jiang, Zheng / Wang, Qiao / Dong, You	Effective width evaluation for HSS-UHPC composite beams with perfobond strip connectors	116828
Miao, Liyue / Jin, Liu / Chen, Fengjuan / Du, Xiuli	Experiment study on seismic performance and size effect in BFRP-RC squat shear walls with different horizontal reinforcement ratios	116888
Huang, Zhaoqi / Zhao, Xianzhong / Sivakumaran, Ken S.	Experimental and analytical studies on the behavior of connections between high-rise braced steel storage racks and the spine bracing	116798
Zhao, Chunfeng / Zhang, Li / He, Kaicheng / Chen, Yingjie / Li, Xiaojie	Experimental and numerical study on the blast resistance of C-shaped doubled steel concrete slab (C-DSCS) with L-shaped connectors	116900
Wang, Gaofei / Wei, Yang / Zhang, Yirui / Liu, Lin / Lin, Yu	Experimental behavior of concrete-filled double-skin tubular columns with outer galvanized corrugated steel tubes under axial compression	116856
Gehri, Nicola / Mata-Falcón, Jaime / Kaufmann, Walter	Experimental investigation of the shear response of large-scale fibre-reinforced concrete panels	116598
Yang, Xing-Ju / Lin, Feng / Gu, Xiang-Lin	Experimental studies on improving progressive collapse resistance of RC beam–column assemblies using kinked steel plates	116842
Tong, Jing-Zhong / Yu, Chao-Qun / Tong, Gen-shu / Xu, Shi-lang	Experimental study on axial resistant behavior of multi-celled corrugated-plate CFST walls	116795
Chen, Boshan / Wang, Yuanqing / Xu, Dongdong / Wang, Zhongxing / Liu, Xiaoling / Lim, James B. P.	An experimental study on shear resistance of austenitic and duplex stainless steel plate girders with perforated webs	116823
Long, Jiejie / Wang, Yongchang / Lou, Guobiao / Wen, Zhaohan / Hu, Zhiyou / Yang, Tao / Ke, Lu	Experimental, numerical and analytical investigation of bending performance of bolted demountable composite beams with profiled steel decking	116887
Wang, Jiaqi / Qi, Hao / Zhang, Zaiyu / Zhang, Bin / Sun, Qing	Failure mechanism of a Q690 steel tubular transmission Tower: Full-Scale experiment and numerical simulation	116881
Bui, Linh Van Hong / Nguyen-Thoi, Trung	Flexural–shear deformation theory (FSDT) for modeling of mechanical responses of RC beams strengthened in shear with ETS-FRP bars	116830
Sobhani, Emad / Safaei, Babak	Free oscillations of porous multi-graded graphene oxide nanocomposites coupled hemispherical-cylindrical shell-configuration structures under various edge constraints	116850
Wang, Xun / Cheng, Lijuan	Full-Range fatigue behavior of NSM CFRP-to-Concrete bonded joints	116812
Li, Lingfang / Shan, Yushi / Jing, Qiang / Yan, Yu / Xia, Zili / Xia, Yong	Global temperature behavior monitoring and analysis of a three-tower cable-stayed bridge	116855
Hu, Shuling / Zhang, Ruibin / Wang, Wei	Hybrid self-centering dual rocking core system for seismic resilience by controlling both structural and nonstructural damage	116796
Diaz Arancibia, Mauricio / Okumus, Pinar	Live load and long-term response of steel bridges with high skew	116811
Grzeszykowski, B. / Lewandowski-Szewczyk, M. J. / Niedośpiał, M.	Load introduction to composite columns revisited—Significance of force allocation and shear connection stiffness	116800
Liu, Zeng-Yu / Yang, Jia-Hua / Lam, Heung-Fai / Peng, Lin-Xin	A Markov chain Monte Carlo-based Bayesian framework for system identification and uncertainty estimation of full-scale structures	116886
Zhang, Haiyan / Jiang, Weian / Wu, Bo / Wen, Bo / Qi, Congyue / Yuan, Lijun	Model fire test and similarity relationship development of RC columns subjected to uneven fire exposure	116858
Conde, Jorge / da Silva, Luís Simões / Santos, Ana Francisca / Seyoum Lemma, Melaku / Tankova, Trayana	A model for the initial stiffness of the face plate component	116836
Tapia, Cristóbal / Aicher, Simon	A new concept for column-to-column connections for multi-storey timber buildings—Numerical and experimental investigations	116770
Lu, Zhao-Hui / Yang, Zhong-Ning / Li, Chun-Qing	A new empirical model for flexural stiffness of corroded post-tensioned concrete beams	116860
Stojanović, Vladimir / Deng, Jian / Petković, Marko D. / Milić, Dunja	Non-stability of a bogie moving along a specific infinite complex flexibly beam-layer structure	116788
Hernandez-Estrada, Edwin / Lastres-Danguillecourt, Orlando / Robles-Ocampo, Jose B. / Ibañez Duharte, Guillermo	A novel method for frequency analysis of a small wind turbine with tubular guyed tower: An experimental evaluation	116870
Bhandari, Sujit / Fischer, Erica C. / Riggio, Mariapaola / Muszyński, Lech	Numerical assessment of In-plane behavior of multi-panel CLT shear walls for modular structures	116846
Wang, Xijun / He, Minjuan / Dong, Hanlin / Li, Zheng	Numerical modeling strategies and parametric analyses of platform-type and balloon-type cross-laminated timber (CLT) shear walls under lateral loads	116857
AbdAllah, AbdelRahman / AbdelRahman, Belal / Galal, Khaled	Numerical study of the seismic performance of fully grouted reinforced masonry shear walls with boundary elements subjected to dynamic loading	116804
Tang, Zhengqi / Li, Zhengliang / Wang, Tao / Lu, Dagang / Tan, Yiqiu	PDEM-based multi-component and global reliability evaluation framework for steel tubular transmission towers with semi-rigid connections	116838
Bastami, Morteza / Salehi, Mohsen / Ghorbani, Masoud / Sarvghad Moghadam, Abdoreza	Performance of special RC shear walls under lateral cyclic and axial loads	116813
Tran, Duong T. / Pham, Thong M. / Hao, Hong / Ha, Ngoc San / Vo, Nhi H. / Chen, Wensu	Precast segmental beams made of fibre-reinforced geopolymer concrete and FRP tendons against impact loads	116862
Ismail, Mohamed K. / AbdelAleem, Basem H. / Hassan, Assem A. A. / El-Dakhakhni, Wael	Prediction of tapered steel plate girders shear strength using multigene genetic programming	116806
Zhong, Jian / Zhu, Yanyan / Mangalathu, Sujith / Gao, Kang	Probabilistic curvature-and-drift limit states predictive models of high-strength bridge columns	116859
Belluco, Sergio / Faleschini, Flora / Hofer, Lorenzo / Pellegrino, Carlo	Probabilistic investigation of transmission length formulations considering model uncertainties	116837
Zhang, Ruibin / Hu, Shuling / Wang, Wei	Probabilistic residual displacement-based design for enhancing seismic resilience of BRBFs using self-centering braces	116808
Meng, Bao / Xiong, Yunpeng / Zhong, Weihui / Duan, Shichao / Li, Hui	Progressive collapse behaviour of composite substructure with large rectangular beam-web openings	116861
Feng, Bin / Chen, Li / Li, Haoyang / Chen, Dapeng / Zhou, Donglei	Propagation of the blast wave in the enclosed blast wall structure (EBWS) at a hazardous chemical storage yard—A mechanism study	116763
Pozo, Juan D. / Hube, Matías A. / Kurama, Yahya C.	Quantification of variability in simulated seismic performance of RC wall buildings	116872
Tobber, L. / Yang, T. Y. / Najam, F. A.	Seismic design and evaluation of controlled rocking outrigger core wall (CROCW) system using equivalent energy design procedure (EEDP)	116845
Mi, Peng / Tan, Ping / Li, Yiming / Liu, Zhibin / Tang, Mengxiong / Zhou, Fulin	Seismic design and experimental testing of precast tolerance concrete shear wall subject to cyclic load	116882
Yue, Kefeng / Xu, Lueqin / Liu, Jie / Fan, Lei / Xu, Lihan	Seismic performance of an energy dissipating shear key for highway bridges using butterfly-shaped steel plates	116885
Pan, Xiaoying / Gencturk, Bora / Aryan, Hadi / Zhuang, Bozhou	Self-healing performance of reinforced concrete beams using engineered aggregates	116829
Li, Fang / Wu, Jun / Arbabi, Freydoon / Liu, Shanhong	A semi-analytical formulation for suspended cables with singularity method	116809
Koh, Mattis / Wang, Yue / Shea, Kristina / Chen, Tian	Shape reconfiguring bistable structures using heat activated fibers	116792
Khakalo, Sergei / Niiranen, Jarkko	Structural buckling analysis of pre-twisted strips	116787
Moradi, Mohammad Javad / Mehrpour, Gita / Adelzadeh, Masoud / Hajiloo, Hamzeh	Structural damage levels of bridges in vehicular collision fires: Predictions using an artificial neural network (ANN) model	116840
Ma, Haomin / Cheng, Zhibao / Shi, Zhifei / Marzani, Alessandro	Structural vibration mitigation via an inertial amplification mechanism based absorber	116764
Zeng, Qiang / Ohsaki, Makoto / Zhang, Jingyao / Zhu, Shaojun / Li, Zhengning / Guo, Xiaonong	Structured triangular mesh generation method for free-form gridshells based on conformal mapping and virtual interaction forces	116879
Xu, Chen / Xiao, Han / Wang, Wei / Ma, Biao / Cheng, Bin / Su, Qingtian	Thermostatic shrinkage effect monitoring and analysis of novel Post-Combination Steel-UHPC composite decks	116864
Plans, Albert / Grau, David / Soltanalipour, Milad / Ferrer-Ballester, Miquel / Marimon, Frederic / Andreu, Antoni	Three-dimensional finite element modeling for bending and pull-out tests of composite slabs	116785
Hu, Jie / Li, Weibai / Li, Jiachun / Chen, Xing / Yao, Song / Huang, Xiaodong	Topology optimization of porous structures by considering acoustic and mechanical characteristics	116843
Tadele, Sisay / Aldabagh, Saif / Zhang, Qi / Shahria Alam, M.	Variability of mechanical properties of steel rebars in North America and its effects on the seismic fragility of reinforced concrete columns	116805

About this
data sheet
IssueID
70419
Published on:
02/09/2023
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - November 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - November 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.