Engineering Structures - February 2020

Published:	February 2020

Articles in this Issue

Author(s)	Title	Page(s)
Ousji, H. / Belkassem, B. / Pyl, L. / Vantomme, J.	Air-blast loading on empty metallic beverage can used as sacrificial cladding: Experimental, analytical and numerical study	109979
Buitrago, Manuel / Sagaseta, Juan / Adam, José M.	Avoiding failures during building construction using structural fuses as load limiters on temporary shoring structures	109906
Markulak, Damir / Dokšanović, Tihomir / Radić, Ivan / Zovkic, Jurko	Behaviour of steel frames infilled with environmentally and structurally favourable masonry units	109909
Cacciotti, R.	Brick masonry response to wind driven rain	110080
Yang, Xia / Tang, Chao / Chen, Yu / Qiao, Tian-Yang	Compressive behavior of steel-reinforced concrete-filled square steel tubular stub columns after exposure to elevated temperature	110048
Ma, Wen / Li, Zhixiang / Xie, Suchao	Crashworthiness analysis of thin-walled bio-inspired multi-cell corrugated tubes under quasi-static axial loading	110069
Douglas, Isabella / Napolitano, Rebecca K. / Garlock, Maria / Glisic, Branko	Cuba’s National School of Ballet: Redefining a structural icon	110040
dos Santos, G. B. / Gardner, L.	Design recommendations for stainless steel I-sections under concentrated transverse loading	109810
Liu, Fengcheng / Feng, Ruoqiang / Tsavdaridis, Konstantinos Daniel / Yan, Guirong	Designing efficient grid structures considering structural imperfection sensitivity	109910
Broth, Zachary / Hoult, Neil A.	Dynamic distributed strain sensing to assess reinforced concrete behaviour	110036
Said, Mohamed / Abd El-Azim, Ahmed A. / Ali, Mahmoud M. / El-Ghazaly, Hany / Shaaban, Ibrahim	Effect of elevated temperature on axially and eccentrically loaded columns containing Polyvinyl Alcohol (PVA) fibers	110065
Knaack, Adam M. / Kurama, Yahya C.	Effect of recycled concrete coarse aggregates on service-load deflections of reinforced concrete columns	109955
Taube, Christopher / Timmler, Hans-Georg / Morgenthal, Guido	Enhanced method for the nonlinear structural analysis based on direct energy principles	109789
Lozina, Zeljan / Sedlar, Damir / Bartulovic, Andela	An evaluation of the generalized–α time integration scheme for a transient response of nonlinear structures	109992
Zhu, Peihua / Zhang, Qilin / Luo, Xiaoqun / Ouyang, Yuanwen / Yin, Jian	Experimental and numerical studies on ductile-fracture-controlled ultimate resistance of bars in aluminum alloy gusset joints under monotonic tensile loading	109834
Yang, T. Y. / Li, Tianyi / Tobber, Lisa / Pan, Xiao	Experimental and numerical study of honeycomb structural fuses	109814
Shi, Benkai / Zhu, Wenxiang / Yang, Huifeng / Liu, Weiqing / Tao, Haotian / Ling, Zhibin	Experimental and theoretical investigation of prefabricated timber-concrete composite beams with and without prestress	109901
Chung, Kwok-Fai / Ho, Ho-Cheung / Hu, Yi-Fei / Wang, Kai / Liu, Xiao / Xiao, Meng / Nethercot, David A.	Experimental evidence on structural adequacy of high strength S690 steel welded joints with different heat input energy	110051
Xu, Haoming / Yu, Min / Xue, Congcong / Xu, Lihua / Ye, Jianqiao	Experimental study on fire resistance of precast concrete columns with efficient reinforcement	109947
Bouziadi, Farid / Boulekbache, Bensaid / Haddi, Abdelkader / Hamrat, Mostefa / Djelal, Chafika	Finite element modeling of creep behavior of FRP-externally strengthened reinforced concrete beams	109908
Singha, Tripuresh Deb / Rout, Mrutyunjay / Bandyopadhyay, Tanmoy / Karmakar, Amit	Free vibration analysis of rotating pretwisted composite sandwich conical shells with multiple debonding in hygrothermal environment	110058
Huang, Haoyu / Gao, Yan / Chang, Wen-Shao	Human-induced vibration of cross-laminated timber (CLT) floor under different boundary conditions	110016
Osuna-Sequera, Carlos / Llana, Daniel F. / Iñiguez-González, Guillermo / Arriaga, Francisco	The influence of cross-section variation on bending stiffness assessment in existing timber structures	110082
Fan, Liang / Tan, Xiao / Zhang, Qinghua / Meng, Weina / Chen, Genda / Bao, Yi	Monitoring corrosion of steel bars in reinforced concrete based on helix strains measured from a distributed fiber optic sensor	110039
Couchaux, M. / Alhasawi, A. / Ben Larbi, A.	Monotonic and cyclic tests on beam to column bolted connections with thermal insulation layer	109621
Zhang, Zili	Numerical and experimental investigations of the sloshing modal properties of sloped-bottom tuned liquid dampers for structural vibration control	110042
Xu, B. / Bompa, D. V. / Elghazouli, A. Y. / Ruiz-Teran, A. M. / Stafford, P. J.	Numerical assessment of reinforced concrete members incorporating recycled rubber materials	110017
Sejkot, Petr / Ormarsson, Sigurdur / Vessby, Johan / Källsner, Bo	Numerical out-of-plane stability analysis of long span timber trusses with focus on buckling length calculations	109670
Pane, Vincenzo / Bellavita, Diego / Castori, Giulio / Vecchietti, Alessia / Cecconi, Manuela	On the interaction between spread foundations and tie-beams under eccentric loading	109907
Petrini, Francesco / Giaralis, Agathoklis / Wang, Zixiao	Optimal tuned mass-damper-inerter (TMDI) design in wind-excited tall buildings for occupants’ comfort serviceability performance and energy harvesting	109904
Thusoo, Shreya / Kono, Susumu / Hamada, Junji / Asai, Yoichi	Performance of precast hollow steel-encased high-strength concrete piles	109995
Audebert, M. / Dhima, D. / Bouchaïr, A.	Proposal for a new formula to predict the fire resistance of timber connections	110041
Silva, R. V. / de Brito, J.	Reinforced recycled aggregate concrete slabs: Structural design based on Eurocode 2	110047
Yi, Ju / Wang, Lei / Floyd, Royce W. / Zhang, Jianren	Rotation-affected bond strength model between steel strand and concrete	110060
Hu, Shuling / Wang, Wei / Qu, Bing	Seismic economic losses in mid-rise steel buildings with conventional and emerging lateral force resisting systems	110021
Hu, Shuling / Wang, Wei / Qu, Bing	Seismic evaluation of low-rise steel building frames with self-centering energy-absorbing rigid cores designed using a force-based approach	110038
Xu, Gang / Li, Aiqun	Seismic performance and design approach of unbonded post-tensioned precast sandwich wall structures with friction devices	110037
Li, Wei / Xu, Li-Feng / Qian, Wei-Wu	Seismic performance of concrete-encased CFST column to steel beam joints with different connection details	109875
Qu, Yang / Luo, Yongfeng / Huang, Qinglong / Zhu, Zhaochen	Seismic response evaluation of single-layer latticed shells based on equivalent modal stiffness and linearized iterative approach	110068
Jaimes, Miguel A. / Candia, Gabriel	Seismic risk of sliding ground-mounted rigid equipment	110066
Massone, Leonardo M. / Ostoic, Daslav F.	Shear strength estimation of masonry walls using a panel model	109900
Celano, Francesca / Dolšek, Matjaž	A simplified risk-targeted decision model for the verification of the seismic performance of critical infrastructure components to the operational limit state	110019
Wilkie, David / Galasso, Carmine	Site-specific ultimate limit state fragility of offshore wind turbines on monopile substructures	109903
Liu, Yang / Tsang, Kin Shun / Hoh, Hsin Jen / Shi, Xiaopeng / Pang, John Hock Lye	Structural fatigue investigation of transverse surface crack growth in rail steels and thermite welds subjected to in-plane and out-of-plane loading	110076
Shi-ping, Yin / Shi-chang, Li / Xun, Su / Xiang-qian, Hu	Study of the mechanical properties of TRC-strengthened eccentric columns exposed to dry and wet cycles in a chloride salt erosion environment	110014
Hu, Jianhui / Chen, Wujun / Li, Yipo / Qu, Yegao / Zhao, Bing / Yang, Deqing	Temperature-stress-time methodology for flat-patterning ETFE cushions in use for large-span building structures	109607
Wang, Fangying / Zhao, Ou / Young, Ben	Testing and numerical modelling of S960 ultra-high strength steel angle and channel section stub columns	109902
Piscopo, V. / Scamardella, A.	Ultimate strength assessment of intact and pitted platings under biaxial compression	110079
Pacheco, João Nuno / de Brito, Jorge / Chastre, Carlos / Evangelista, Luís	Uncertainty of shear resistance models: Influence of recycled concrete aggregate on beams with and without shear reinforcement	109905
Orlowski, Kristopher	Verified and validated design curves and strength reduction factors for post-tensioned composite steel-timber stiffened wall systems	110053
Janocha, Marek Jan / Ong, Muk Chen / Li, Zhong	Vortex-induced vibrations of two cylinders with different diameters close to a horizontal plane boundary at low Reynolds number	109893

About this
data sheet
IssueID
35895
Published on:
04/01/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - February 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - February 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.