Engineering Structures - August 2019

Published:	August 2019

Articles in this Issue

Author(s)	Title	Page(s)
Quaranta, Giuseppe / Mollaioli, Fabrizio	Analysis of near-fault pulse-like seismic signals through Variational Mode Decomposition technique	121-135
Bernat-Maso, Ernest / Gil, Lluís	Assessing the performance of CFRP strengthening on masonry walls using experimental modal analysis	184-193
Ribeiro, Lucas S. / Wilhelm, Volmir E. / Faria, Étore F. / Correa, Jairo M. / dos Santos, Ana Carolina P.	A comparative analysis of long-term concrete deformation models of a buttress dam	301-307
Froli, Maurizio / Giresini, Linda / Laccone, Francesco	Dynamics of a new seismic isolation device based on tribological smooth rocking (TROCKSISD)	154-169
Gao, Fei / Chen, Pan / Xia, Yong / Zhu, Hong-Ping / Weng, Shun	Efficient calculation and monitoring of temperature actions on supertall structures	1-11
Daňková, J. / Mec, P. / Šafrata, J.	Experimental investigation and performance of timber-concrete composite floor structure with non-metallic connection system	207-218
Alsaif, Abdulaziz / Garcia, Reyes / Figueiredo, Fabio P. / Neocleous, Kyriacos / Christofe, Andreas / Guadagnini, Maurizio / Pilakoutas, Kypros	Fatigue performance of flexible steel fibre reinforced rubberised concrete pavements	170-183
Joseph, Roshan / Li, Lingfang / Haider, Mohammad Faisal / Giurgiutiu, Victor	Hybrid SAFE-GMM approach for predictive modeling of guided wave propagation in layered media	194-206
Bachtiar, Erik V. / Konopka, Daniel / Schmidt, Benjamin / Niemz, Peter / Kaliske, Michael	Hygro-mechanical analysis of wood-adhesive joints	258-270
Reichert, I. / Olney, P. / Lahmer, T.	Influence of the error description on model-based design of experiments	100-109
Lakavath, Chandrashekhar / Joshi, Suhas S. / Prakash, S. Suriya	Investigation of the effect of steel fibers on the shear crack-opening and crack-slip behavior of prestressed concrete beams using digital image correlation	28-42
Lam, Heung-Fai / Hu, Jun / Zhang, Feng-Liang / Ni, Yan-Chun	Markov chain Monte Carlo-based Bayesian model updating of a sailboat-shaped building using a parallel technique	12-27
Lacidogna, Giuseppe / Scaramozzino, Domenico / Carpinteri, Alberto	A matrix-based method for the structural analysis of diagrid systems	340-352
Li, Wenxiong / Ma, Haitao	A novel model order reduction scheme for fast and accurate material nonlinear analyses of large-scale engineering structures	238-257
Allahvirdizadeh, Reza / Oliveira, Daniel V. / Silva, Rui A.	Numerical modeling of the seismic out-of-plane response of a plain and TRM-strengthened rammed earth subassembly	43-56
Yan, Z. / Chen, Y. / Sun, X. P. / Zhang, H. Q.	Performance evaluation of an "m" shaped SCM wall in reinforcement of pile-supported wharf under yard heaped loads with centrifuge modelling	308-323
Ahmed, Saddam M. / Avudaiappan, Siva / Sheet, Ikhlas S. / Saavedra Flores, Erick I. / Pina, Juan C. / Yanez, Sergio J. / Guzmán, Carlos F.	Prediction of longitudinal shear resistance of steel-concrete composite slabs	295-300
Yan, Wangchen / Deng, Lu / Zhang, Feng / Li, Tiange / Li, Shaofan	Probabilistic machine learning approach to bridge fatigue failure analysis due to vehicular overloading	91-99
O'Flaherty, Fin / Browne, Elena	A proposal to modify the moment coefficient in Eurocode 2 for predicting the residual strength of corroded reinforced concrete beams	324-339
McCombie, Paul F.	Rocking of a bell tower – Investigation by non-contact video measurement	271-280
Castaldo, Paolo / Gino, Diego / Mancini, Giuseppe	Safety formats for non-linear finite element analysis of reinforced concrete structures: discussion, comparison and proposals	136-153
Binici, Baris / Canbay, Erdem / Aldemir, Alper / Demirel, İsmail Ozan / Uzgan, Ugur / Eryurtlu, Zafer / Bulbul, Koray / Yakut, Ahmet	Seismic behavior and improvement of autoclaved aerated concrete infill walls	68-81
Brandolese, Sara / Fiorin, Laura / Scotta, Roberto	Seismic demand and capacity assessment of suspended ceiling systems	219-237
Zhao, Zhipeng / Zhang, Ruifu / Jiang, Yiyao / Pan, Chao	Seismic response mitigation of structures with a friction pendulum inerter system	110-120
Li, Qi / Liu, Huijuan / Wang, Tiancheng / Bao, Enhe	Study on shear force distribution in structural design of BRBF structure with high β value	82-90
Stathas, Nikos / Karakasis, Ioannis / Strepelias, Elias / Palios, Xenfon / Bousias, Stathis / Fardis, Michael N.	Tests and analysis of RC building, with or without masonry infills, for instant column loss	57-67
Yu, Miao / Zhao, Lin / Zhan, Yanyan / Cui, Wei / Ge, Yaojun	Wind-resistant design and safety evaluation of cooling towers by reinforcement area criterion	281-294

About this
data sheet
IssueID
28413
Published on:
07/06/2019
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - August 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - August 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.