Engineering Structures - March 2019

Published:	March 2019

Articles in this Issue

Author(s)	Title	Page(s)
Mostofinejad, Davood / Hajrasouliha, Mohammadjavad	3D beam–column corner joints retrofitted with X-shaped FRP sheets attached via the EBROG technique	987-998
Hong, Huan-Peng / Yuan, Huang / Deng, Lu / Bai, Yu	Axial capacity of steel tube-reinforced concrete stub columns	523-532
Xin, Yu / Hao, Hong / Li, Jun / Wang, Zuo-Cai / Wan, Hua-Ping / Ren, Wei-Xin	Bayesian based nonlinear model updating using instantaneous characteristics of structural dynamic responses	459-474
Li, Hai-Ting / Young, Ben	Behaviour of cold-formed high strength steel RHS under localised bearing forces	1049-1058
Wang, Yuyin / Yang, Ligui / Yang, Hua / Liu, Changyong	Behaviour of concrete-filled corrugated steel tubes under axial compression	475-495
Ivorra, Salvador / Foti, Dora / Gallo, Valentina / Vacca, Vitantonio / Bru, David	Bell's dynamic interaction on a reinforced concrete bell tower	965-975
Mahlknecht, Ursula / Brandner, Reinhard	Block shear failure mechanism of axially-loaded groups of screws	220-242
Zhou, Hao / Torres, Juan P. / Fernando, Dilum / Law, Angus / Emberley, Richard	The bond behaviour of CFRP-to-steel bonded joints with varying bond properties at elevated temperatures	1121-1133
Yang, Y. B. / Zhang, Bin / Chen, Yanan / Qian, Yao / Wu, Yuntian	Bridge damping identification by vehicle scanning method	637-645
Qin, Chao / Mahmoud, Hussam	Collapse performance of composite steel frames under fire	662-676
Araya-Letelier, G. / Parra, P. F. / Lopez-Garcia, D. / Garcia-Valdes, A. / Candia, G. / Lagos, R.	Collapse risk assessment of a Chilean dual wall-frame reinforced concrete office building	770-779
Jiang, Zi-qin / Yang, Xiao-Feng / Dou, Chao / Li, Chao / Zhang, Ai-Lin	Cyclic testing of replaceable damper: Earthquake-resilient prefabricated column-flange beam-column joint	922-936
Qiu, Canxing / Zhang, Yichen / Qu, Bing / Dai, Chunxue / Hou, Hetao / Li, Han	Cyclic testing of seismic dampers consisting of multiple energy absorbing steel plate clusters	255-264
Murray, Cameron D. / Diaz Arancibia, Mauricio / Okumus, Pinar / Floyd, Royce W.	Destructive testing and computer modeling of a scale prestressed concrete I-girder bridge	195-205
Madera Sierra, Ingrid E. / Losanno, Daniele / Strano, Salvatore / Marulanda, Johannio / Thomson, Peter	Development and experimental behavior of HDR seismic isolators for low-rise residential buildings	894-906
Bai, Rui / Liu, Si-Wei / Liu, Yao-Peng / Chan, Siu-Lai	Direct analysis of tapered-I-section columns by one-element-per-member models with the appropriate geometric-imperfections	907-921
Gao, Fei / Xiao, Zigang / Guan, Xingquan / Zhu, Hongping / Du, Guofeng	Dynamic behavior of CHS-SHS tubular T-joints subjected to low-velocity impact loading	720-740
Lu, Xiang / Wu, Zhenyu / Pei, Liang / He, Kun / Chen, Jiankang / Li, Zefa / Yang, Zhe	Effect of the spatial variability of strength parameters on the dynamic damage characteristics of gravity dams	281-289
Alavi-Dehkordi, Sayedmahdi / Mostofinejad, Davood / Alaee, Pooya	Effects of high-strength reinforcing bars and concrete on seismic behavior of RC beam-column joints	702-719
Zhu, Zhihui / Gong, Wei / Wang, Lidong / Bai, Yu / Yu, Zhiwu / Zhang, Lei	Efficient assessment of 3D train-track-bridge interaction combining multi-time-step method and moving track technique	290-302
Gernay, Thomas / Van Coile, Ruben / Elhami Khorasani, Negar / Hopkin, Danny	Efficient uncertainty quantification method applied to structural fire engineering computations	1-17
Nijgh, Martin Paul / Gîrbacea, Ioan Andrei / Veljković, Milan	Elastic behaviour of a tapered steel-concrete composite beam optimized for reuse	366-374
Yi, Jiang / Li, Jianzhong	Experimental and numerical study on seismic response of inclined tower legs of cable-stayed bridges during earthquakes	180-194
Wu, Dongyue / Liang, Shuting / Shen, Mengying / Guo, Zhengxing / Zhu, Xiaojun / Sun, Chongfang	Experimental estimation of seismic properties of new precast shear wall spatial structure model	319-339
Xu, Qingfeng / Chen, Lingzhu / Han, Chongqing / Harries, Kent A. / Xu, Zhimin	Experimental research on fire-damaged RC continuous T-beams subsequently strengthened with CFRP sheets	135-149
van de Lindt, John W. / Furley, Jace / Amini, M. Omar / Pei, Shiling / Tamagnone, Gabriele / Barbosa, Andre R. / Rammer, Doug / Line, Philip / Fragiacomo, Massimo / Popovski, Marjan	Experimental seismic behavior of a two-story CLT platform building	408-422
Bao, Wei / Jiang, Jin / Shao, Yongsong / Liu, Yuan	Experimental study of the lateral performance of a steel stud wall with a semi-rigid connected frame	677-689
Tan, Ee Loon / Varsani, Harshard / Liao, Feiyu	Experimental study on demountable steel-concrete connectors subjected to combined shear and tension	110-123
Ye, X. W. / Xi, P. S. / Nagode, Marko	Extension of REBMIX algorithm to von Mises parametric family for modeling joint distribution of wind speed and direction	1134-1145
Huang, Cheng / Chen, Tao / Feng, Siyuan	Finite element analysis of fatigue crack growth in CFRP-repaired four-point bend specimens	398-407
Yin, Hor / Shirai, Kazutaka / Teo, Wee	Finite element modelling to predict the flexural behaviour of ultra-high performance concrete members	741-755
Kim, Sang-Hyun / Park, Sung Yong / Park, YoungHwan / Jeon, Se-Jin	Friction characteristics of post-tensioning tendons in full-scale structures	389-397
Torres, Benjamín / Bertolesi, Elisa / Calderón, Pedro A. / Moragues, Juan J. / Adam, José M.	A full-scale timbrel cross vault subjected to vertical cyclical displacements in one of its supports	791-804
Hajiloo, Hamzeh / Green, Mark F.	GFRP reinforced concrete slabs in fire: Finite element modelling	1109-1120
Xu, You-Lin / Wang, Zhi-Lu / Li, Guo-Qiang / Chen, Suwen / Yang, Yeong-bin	High-speed running maglev trains interacting with elastic transitional viaducts	562-578
Chen, Shuxian / Xie, Xu / Zhuge, Hanqing	Hysteretic model for steel piers considering the local buckling of steel plates	303-318
Do, Tin V. / Pham, Thong M. / Hao, Hong	Impact force profile and failure classification of reinforced concrete bridge columns against vehicle impact	443-458
Ning, Ning / Ma, Zhongguo John / Zhang, Pengpeng / Yu, Dehu / Wang, Jianlang	Influence of masonry infills on seismic response of RC frames under low frequency cyclic load	70-82
Morais, Jordana L. / Silva, Frederico M. A.	Influence of modal coupling and geometrical imperfections on the nonlinear buckling of cylindrical panels under static axial load	816-829
Liu, Yang / Guo, Zixiong / Liu, Xiaojuan / Chicchi, Rachel / Shahrooz, Bahram	An innovative resilient rocking column with replaceable steel slit dampers: Experimental program on seismic performance	830-840
Wu, Pengtao / Wu, Chengqing / Liu, Zhongxian / Hao, Hong	Investigation of shear performance of UHPC by direct shear tests	780-790
Yang, Yang / Li, Chun / Bashir, Musa / Wang, Jin / Yang, Chunmin	Investigation on the sensitivity of flexible foundation models of an offshore wind turbine under earthquake loadings	756-769
Nguyen, T. N. Hang / Tan, Kang-Hai / Kanda, Tetsushi	Investigations on web-shear behavior of deep precast, prestressed concrete hollow core slabs	579-593
Zhou, Peng / Guo, Yan-Lin / Bradford, Mark Andrew / Pi, Yong-Lin / Tong, Jing-Zhong	Load resistance and hysteretic response of multiple cross-arm pre-tensioned cable stayed buckling-restrained braces	949-964
Nguyen, Wilson / Bandelt, Matthew J. / Trono, William / Billington, Sarah L. / Ostertag, Claudia P.	Mechanics and failure characteristics of hybrid fiber-reinforced concrete (HyFRC) composites with longitudinal steel reinforcement	243-254
Zhou, Kan / Han, Lin-Hai	Modelling the behaviour of concrete-encased concrete-filled steel tube (CFST) columns subjected to full-range fire	265-280
Mohammadi Darestani, Yousef / Shafieezadeh, Abdollah	Multi-dimensional wind fragility functions for wood utility poles	937-948
Ke, Ke / Wang, Fuming / Yam, Michael C. H. / Deng, Lu / He, Yongjun	A multi-stage-based nonlinear static procedure for estimating seismic demands of steel MRFs equipped with steel slit walls	1091-1108
Ferdous, Wahid / Bai, Yu / Ngo, Tuan Duc / Manalo, Allan / Mendis, Priyan	New advancements, challenges and opportunities of multi-storey modular buildings – A state-of-the-art review	883-893
Vannucci, P. / Masi, F. / Stefanou, I.	A nonlinear approach to the wind strength of Gothic Cathedrals: The case of Notre Dame of Paris	860-873
Zhou, Rui / Ge, Yaojun / Yang, Yongxin / Liu, Shiyi / Du, Yanliang / Zhang, Lihai	A nonlinear numerical scheme to simulate multiple wind effects on twin-box girder suspension bridges	1072-1090
Luo, Jun / Zeng, Zhiping	A novel algorithm for longitudinal track-bridge interactions considering loading history and using a verified mechanical model of fasteners	52-68
Sellin, Jean-Philippe / Sousa, Helder / Barthélémy, Jean-François / Torrenti, Jean-Michel	Novel semi-analytical model to calculate shear forces due to viscoelastic interactions	999-1013
Yun, Wanying / Lu, Zhenzhou / Feng, Kaixuan / Jiang, Xian	A novel step-wise AK-MCS method for efficient estimation of fuzzy failure probability under probability inputs and fuzzy state assumption	340-350
Zhou, Lina / Chui, Ying-Hei / Ni, Chun	Numerical study on seismic force modification factors of hybrid light wood frame structures connected to a stiff core	874-882
Ekmekyapar, Talha / Alhatmey, Ihssan A. H.	Post-fire resistance of internally ring stiffened high performance concrete filled steel tube columns	375-388
Li, Xiuling / Xu, Zhenbo / Bao, Yi / Cong, Zhengang	Post-fire seismic behavior of two-bay two-story frames with high-performance fiber-reinforced cementitious composite joints	150-159
Kanyilmaz, Alper	The problematic nature of steel hollow section joint fabrication, and a remedy using laser cutting technology: A review of research, applications, opportunities	1027-1048
Mata-Falcón, Jaime / Pallarés, Luis / Miguel, Pedro F.	Proposal and experimental validation of simplified strut-and-tie models on dapped-end beams	594-609
Deng, Kailai / Yan, Guihao / Yang, Haipeng / Zhao, Canhui	RC arch bridge seismic performance evaluation by sectional N-M interaction and coupling effect of brace beams	18-29
Quayyum, Shahriar	Refined parametric models for wind load resistances of wood-frame walls	841-859
Soo Lon Wah, William / Owen, John S. / Chen, Yung-Tsang / Elamin, Ahmed / Roberts, Gethin Wyn	Removal of masking effect for damage detection of structures	646-661
Motaleb, Mehdi / Lindquist, Will / Ibrahim, Ahmed / Hindi, Riyadh	Repair assessment for distortion-induced fatigue cracks in a seismically retrofitted double-deck bridge complex	124-134
Shan, Li / Petrone, Floriana / Kunnath, Sashi	Robustness of RC buildings to progressive collapse: Influence of building height	690-701
Eslami, Mohammadreza / Namba, Hisashi / Kodur, Venkatesh / Mahamid, Mustafa / Ali Morovat, Mohamed	Seismic behavior of composite beam connected to HSS column with large width-to-thickness ratio	423-442
Ye, Zhihang / Feng, De-Cheng / Wu, Gang	Seismic control of modularized suspended structures with optimal vertical distributions of the secondary structure parameters	160-179
Hui, Li / Hraib, Faress / Gillis, Brandon / Vicente, Miguel / Hindi, Riyadh	A Simplified method to minimize exterior girder rotation of steel bridges during deck construction	84-93
Li, Zhenbao / Yu, Chunyi / Xie, Yongping / Ma, Hua / Tang, Zhenyun	Size effect on seismic performance of high-strength reinforced concrete columns subjected to monotonic and cyclic loading	206-219
Zamanifar, Hossein / Sarrami-Foroushani, Saeid / Azhari, Mojtaba	Static and dynamic analysis of corrugated-core sandwich plates using finite strip method	30-51
Obaidat, Ala' T. / Ashour, Ahmed / Galal, Khaled	Stress-strain model for C-shape confined concrete masonry boundary elements of RM shear walls	1059-1071
Maung, P. / Prusty, B. G. / White, J. M. / David, M. / Phillips, A. W. / St John, N. A.	Structural performance of a shape-adaptive composite hydrofoil using automated fibre placement	351-365
Sharif, Alfarabi M. / Al-Mekhlafi, Galal M. / Al-Osta, Mohammed A.	Structural performance of CFRP-strengthened concrete-filled stainless steel tubular short columns	94-109
Dhanapal, Jothiarun / Ghaednia, Hossein / Das, Sreekanta / Velocci, Jonathan	Structural performance of state-of-the-art VectorBloc modular connector under axial loads	496-509
Fang, Cheng / Zheng, Yue / Chen, Junbai / Yam, Michael C. H. / Wang, Wei	Superelastic NiTi SMA cables: Thermal-mechanical behavior, hysteretic modelling and seismic application	533-549
Afshan, S. / Theofanous, M. / Wang, J. / Gkantou, M. / Gardner, L.	Testing, numerical simulation and design of prestressed high strength steel arched trusses	510-522
Zhang, Yahui / Li, Yuyin / Kennedy, David	An uncertain computational model for random vibration analysis of subsea pipelines subjected to spatially varying ground motions	550-561
Zeng, Qiang / Guo, Xiaonong / Huang, Zewei / Zong, Shaohan	Uniaxial compression bearing capacity of bolted ball-cylinder joint	976-986
Petrone, Floriana / Monti, Giorgio	Unified code-compliant equations for bending and ductility capacity of full and hollow rectangular RC sections	805-815
Coletta, Giorgia / Miraglia, Gaetano / Pecorelli, Marica / Ceravolo, Rosario / Cross, Elizabeth / Surace, Cecilia / Worden, Keith	Use of the cointegration strategies to remove environmental effects from data acquired on historical buildings	1014-1026
Ghassempour, Mina / Failla, Giuseppe / Arena, Felice	Vibration mitigation in offshore wind turbines via tuned mass damper	610-636

About this
data sheet
IssueID
26931
Published on:
11/01/2019
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - March 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - March 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.