Engineering Structures - February 2019

Published:	February 2019

Articles in this Issue

Author(s)	Title	Page(s)
Salehi, Hadi / Das, Saptarshi / Chakrabartty, Shantanu / Biswas, Subir / Burgueno, Rigoberto	An algorithmic framework for reconstruction of time-delayed and incomplete binary signals from an energy-lean structural health monitoring system	603-620
Zhu, Yazhi / Kanvinde, Amit / Pan, Zuanfeng	Analysis of post-necking behavior in structural steels using a one-dimensional nonlocal model	321-331
Zhou, Xuhong / Zhao, Yi / Liu, Jiepeng / Chen, Yohchia Frank / Yang, Yuanlong	Bending experiment on a novel configuration of cold-formed U-shaped steel-concrete composite beams	124-133
Wang, Weiqiang / Wu, Chengqing / Liu, Zhongxian	Compressive behavior of hybrid double-skin tubular columns with ultra-high performance fiber-reinforced concrete (UHPFRC)	419-441
Rackauskaite, Egle / Kotsovinos, Panagiotis / Jeffers, Ann / Rein, Guillermo	Computational analysis of thermal and structural failure criteria of a multi-storey steel frame exposed to fire	524-543
Zhang, Long / Huang, Jingyu	Dynamic interaction analysis of the high-speed maglev vehicle/guideway system based on a field measurement and model updating method	1-17
Jiang, Lizhong / Kang, Xin / Li, Changqing / Shao, Guangqiang	Earthquake response of continuous girder bridge for high-speed railway: A shaking table test study	249-263
Barros, Mariana / Cavaco, Eduardo / Neves, Luis / Júlio, Eduardo	Effect of non-structural masonry brick infill walls on the robustness of a RC framed building severely damaged due to a landslide	274-283
Zhang, Yao / Zhao, Haisheng / Lie, Seng Tjhen	Estimation of mode shapes of beam-like structures by a moving lumped mass	654-668
Fiorino, Luigi / Bucciero, Bianca / Landolfo, Raffaele	Evaluation of seismic dynamic behaviour of drywall partitions, façades and ceilings through shake table testing	103-123
Farzad, Mahsa / Shafieifar, Mohamadreza / Azizinamini, Atorod	Experimental and numerical study on an innovative sandwich system utilizing UPFRC in bridge applications	349-356
Chen, Junbo / Chan, Tak-Ming / Su, Ray Kai Leung / Castro, José Miguel	Experimental assessment of the cyclic behaviour of concrete-filled steel tubular beam-columns with octagonal sections	544-560
Centelles, Xavier / Castro, J. Ramon / Cabeza, Luisa F.	Experimental results of mechanical, adhesive, and laminated connections for laminated glass elements – A review	192-204
Wang, Yu-Hang / Yu, Jie / Liu, Jie-Peng / Chen, Y. Frank	Experimental study on assembled monolithic steel-concrete composite beam in positive moment	494-509
Wang, Sihao / Liu, Yuqing / He, Jun / Xin, Haohui / Yao, Hongbing	Experimental study on cyclic behavior of composite beam with corrugated steel web considering different shear-span ratio	669-684
Ma, Fuhao / Gilbert, Benoit P. / Guan, Hong / Xue, Huizhong / Lu, Xinzheng / Li, Yi	Experimental study on the progressive collapse behaviour of RC flat plate substructures subjected to corner column removal scenarios	728-741
Meng, Xianjie / Li, Tieying / Yang, Qingshan	Experimental study on the seismic mechanism of a full-scale traditional Chinese timber structure	484-493
Lapi, Massimo / Ramos, António Pinho / Orlando, Maurizio	Flat slab strenghtening techniques against punching-shear	160-180
Hou, Hetao / Ji, Kefan / Wang, Wenhao / Qu, Bing / Fang, Mingji / Qiu, Canxing	Flexural behavior of precast insulated sandwich wall panels: Full-scale tests and design implications	750-761
Zhu, Zewen / Zhu, Eryu / Ni, Yuancheng / Li, Dongdong	Flexural fatigue behavior of large-scale beams strengthened with side near surface mounted (SNSM) CFRP strips	134-147
Verma, Amrit Shankar / Jiang, Zhiyu / Vedvik, Nils Petter / Gao, Zhen / Ren, Zhengru	Impact assessment of a wind turbine blade root during an offshore mating process	205-222
Bompa, D. V. / Elghazouli, A. Y.	Inelastic cyclic behaviour of RC members incorporating threaded reinforcement couplers	468-483
Zhang, Qian / Cheng, Xiaoquan / Cheng, Yujia / Li, Weidong / Hu, Renwei	Investigation of tensile behavior and influence factors of composite-to-metal 2D-scarf bonded joint	284-294
Lin, R. M. / Ng, T. Y.	An iterative method for exact eigenvalues and eigenvectors of general nonviscously damped structural systems	630-641
Wadi, H. / Amziane, S. / Toussaint, E. / Taazount, M.	Lateral load-carrying capacity of hemp concrete as a natural infill material in timber frame walls	264-273
Gil, Beatriz / Goñi, Rufino / Bijlaard, Frans / Bayo, Eduardo	Major axis steel joint under torsion: Stiffness and strength characterization	586-602
Buchanan, C. / Gardner, L.	Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges	332-348
Jiang, Hao / Sun, Liqiang / Dong, Dongying / Li, Guangyao / Cui, Junjia	Microstructure and mechanical property evolution of CFRP/Al electromagnetic riveted lap joint in a severe condition	181-191
Faccio Júnior, Celso Jaco / Cardozo, Ana Carolina Pegoraro / Monteiro Júnior, Valdemar / Gay Neto, Alfredo	Modeling wind turbine blades by geometrically-exact beam and shell elements: A comparative approach	357-378
Gao, Wenjun / Lu, Xilin	Modelling unbonded prestressing tendons in self-centering connections through improved sliding cable elements	809-828
Khy, Kimleng / Chintanapakdee, Chatpan / Warnitchai, Pennung / Wijeyewickrema, Anil C.	Modified response spectrum analysis to compute shear force in tall RC shear wall buildings	295-309
Le, N. T. / Thambiratnam, D. P. / Nguyen, A. / Chan, T. H. T.	A new method for locating and quantifying damage in beams from static deflection changes	779-792
Yuan, Peng / Cai, C. S. / Li, Dejian / Xu, Guoji / Li, Chuanxi	A novel method for determining the spatial responses of a cable-stayed bridge with four cable-planes	223-233
Kamil, Ghanim Mohammed / Liang, Qing Quan / Hadi, Muhammad N. S.	Numerical analysis of axially loaded rectangular concrete-filled steel tubular short columns at elevated temperatures	89-102
Bartoli, Gianni / Betti, Michele / Galano, Luciano / Zini, Giacomo	Numerical insights on the seismic risk of confined masonry towers	713-727
Ghazizadeh, Sina / Cruz-Noguez, Carlos A. / Li, Yong	Numerical study of hybrid GFRP-steel reinforced concrete shear walls and SFRC walls	700-712
Albero, V. / Espinos, A. / Serra, E. / Romero, M. L. / Hospitaler, A.	Numerical study on the flexural behaviour of slim-floor beams with hollow core slabs at elevated temperature	561-573
Ferreira, Fernando / Simões, Luís	Optimum design of a cable-stayed steel footbridge with three dimensional modelling and control devices	510-523
Jafari, Mohammad / Sarkar, Partha P.	Parameter identification of wind-induced buffeting loads and onset criteria for dry-cable galloping of yawed/inclined cables	685-699
Chen, Hongbing / Masud, Mahadi / Sawab, Jamshaid / Huang, Hsuan Wen / Xu, Bin / Mo, Y. L. / Hsu, Thomas T. C.	Parametric study on the non-contact splices at drilled shaft to bridge column interface based on multiscale modeling approach	400-418
Xie, Gui-hua / Feng, Qian-hong / Wang, C. M. / Tang, Yong-sheng / Liu, Rong-gui	Prediction and optimization of stress distribution in bonded anchors for CFRP tendons	50-66
Xie, Yazhou / Zheng, Qiu / Yang, Chuang-Sheng Walter / Zhang, Wenyang / DesRoches, Reginald / Padgett, Jamie E. / Taciroglu, Ertugrul	Probabilistic models of abutment backfills for regional seismic assessment of highway bridges in California	452-467
Zhao, Wentong / Yang, Hong / Chen, Jinfeng / Sun, Panxu	A proposed model for nonlinear analysis of RC beam-column joints under seismic loading	829-843
Kawano, Alexandre / Zine, Abdelmalek	Reliability evaluation of continuous beam structures using data concerning the displacement of points in a small region	379-387
Bertolesi, Elisa / Adam, José M. / Rinaudo, Paula / Calderón, Pedro A.	Research and practice on masonry cross vaults – A review	67-88
Zanini, Mariano Angelo / Hofer, Lorenzo / Faleschini, Flora	Reversible ground motion-to-intensity conversion equations based on the EMS-98 scale	310-320
Arena, Andrea / Carboni, Biagio / Angeletti, Fabio / Babaz, Mathieu / Lacarbonara, Walter	Ropeway roller batteries dynamics: Modeling, identification, and full-scale validation	793-808
Yang, Y. B. / Yau, J. D. / Urushadze, S.	Scanning the modal coupling of slender suspension footbridges by a virtual moving vehicle	574-585
Pantoli, Elide / Hutchinson, Tara	Seismic accelerations in architectural precast concrete cladding	742-749
Xin, Lifeng / Li, Xiaozhen / Zhang, Zetian / Zhao, Lufeng	Seismic behavior of long-span concrete-filled steel tubular arch bridge subjected to near-fault fling-step motions	148-159
Zhang, Ruifu / Zhao, Zhipeng / Dai, Kaoshan	Seismic response mitigation of a wind turbine tower using a tuned parallel inerter mass system	29-39
Fiset, Mathieu / Bastien, Josée / Mitchell, Denis	Shear strengthening of concrete members with unbonded transverse reinforcement	40-49
Xu, Wenbin / Cao, Yang / Liu, Binghua	Strength efficiency evaluation of cemented tailings backfill with different stratified structures	18-28
Kang, Fei / Li, Junjie / Zhao, Sizeng / Wang, Yujun	Structural health monitoring of concrete dams using long-term air temperature for thermal effect simulation	642-653
Huang, Le / Chi, Yin / Xu, Lihua / Deng, Fangqian	A thermodynamics-based damage-plasticity model for bond stress-slip relationship of steel reinforcement embedded in fiber reinforced concrete	762-778
Wang, Yan-Jie / Wu, Zhi-Min / Zheng, Jian-Jun / Zhou, Xiang-Ming	Three-dimensional analytical model for the pull-out response of anchor-mortar-concrete anchorage system based on interfacial bond failure	234-248
Montoya-Vargas, S. / Aristizabal-Ochoa, J. Dario	Torsion of prismatic I-beams with partially restrained warping at the end supports: Bending analogy method	621-629
Liu, Yiming / Zhang, Qinghua / Meng, Weina / Bao, Yi / Bu, Yizhi	Transverse fatigue behaviour of steel-UHPC composite deck with large-size U-ribs	388-399
Farzampour, Alireza / Eatherton, Matthew R.	Yielding and lateral torsional buckling limit states for butterfly-shaped shear links	442-451

About this
data sheet
IssueID
21722
Published on:
23/11/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - February 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - February 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.