Engineering Structures - October 2018

Published:	October 2018

Articles in this Issue

Author(s)	Title	Page(s)
Martins, Luís / Silva, Vitor / Bazzurro, Paolo / Marques, Mário	Advances in the derivation of fragility functions for the development of risk-targeted hazard maps	669-680
Sandhaas, Carmen / Görlacher, Rainer	Analysis of nail properties for joint design	231-240
Zhang, Y. F. / Zhang, W. / Yao, Z. G.	Analysis on nonlinear vibrations near internal resonances of a composite laminated piezoelectric rectangular plate	89-106
Massone, Leonardo M. / Orrego, Gonzalo N.	Analytical model for shear strength estimation of reinforced concrete beam-column joints	681-692
Čas, B. / Planinc, I. / Schnabl, S.	Analytical solution of three-dimensional two-layer composite beam with interlayer slips	269-282
Ortega, Javier / Vasconcelos, Graça / Rodrigues, Hugo / Correia, Mariana	Assessment of the efficiency of traditional earthquake resistant techniques for vernacular architecture	1-27
Eid, Rami / Kovler, Konstantin / David, Israel / Khoury, Waseem / Miller, Shay	Behavior and design of high-strength circular reinforced concrete columns subjected to axial compression	472-480
Wang, J. J. / Song, Y. C. / Wang, W. / Li, J.	Calibrations of numerical models by experimental impact tests using scaled steel boxes	481-494
Loong, Cheng Ning / Chang, Chih-Chen / Dimitrakopoulos, Elias G.	Circuit nonlinearity effect on the performance of an electromagnetic energy harvester-structure system	449-459
Albino, J. C. R. / Almeida, C. A. / Menezes, I. F. M. / Paulino, G. H.	Co-rotational 3D beam element for nonlinear dynamic analysis of risers manufactured with functionally graded materials (FGMs)	283-299
Lee, Chang Seok / Han, Sang Whan	Computationally effective and accurate simulation of cyclic behaviour of old reinforced concrete columns	892-907
Peralta, L. / Hube, M. A.	Deck rotation of straight bridges induced by asymmetric characteristics and effect of transverse diaphragms	729-743
Taghinezhadbilondy, Ramin / Yakel, Aaron / Azizinamini, Atorod	Deck-pier connection detail for the simple for dead load and continuous for live load bridge system in seismic regions	76-88
Claus, Timo / Seim, Werner	Development of the multiple tenon timber connection based on experimental studies and FE simulation	331-339
Palermo, Michele / Silvestri, Stefano / Landi, Luca / Gasparini, Giada / Trombetti, Tomaso	A " direct five-step procedure" for the preliminary seismic design of buildings with added viscous dampers	933-950
Gendy, Samer Sabry F. Mehanny / Ayoub, Ashraf	Displacement and mixed fibre beam elements for modelling of slender reinforced concrete structures under cyclic loads	620-630
Qian, Feng / Xu, Tian-Bing / zuo, Lei	A distributed parameter model for the piezoelectric stack harvester subjected to general periodic and random excitations	191-202
Kammouh, Omar / Cimellaro, Gian Paolo / Mahin, Stephen A.	Downtime estimation and analysis of lifelines after an earthquake	393-403
Sharaky, I. A. / Baena, M. / Barris, C. / Sallam, H. E. M. / Torres, L.	Effect of axial stiffness of NSM FRP reinforcement and concrete cover confinement on flexural behaviour of strengthened RC beams: Experimental and numerical study	987-1001
Rahimi, A. / Maheri, Mahmoud R.	The effects of retrofitting RC frames by X-bracing on the seismic performance of columns	813-830
Xu, Hu / Gentilini, Cristina / Yu, Zhixiang / Qi, Xin / Zhao, Shichun	An energy allocation based design approach for flexible rockfall protection barriers	831-852
El-Nemr, Amr / Ahmed, Ehab A. / El-Safty, Adel / Benmokrane, Brahim	Evaluation of the flexural strength and serviceability of concrete beams reinforced with different types of GFRP bars	606-619
Misseri, Giulia / DeJong, Matthew Justin / Rovero, Luisa	Experimental and numerical investigation of the collapse of pointed masonry arches under quasi-static horizontal loading	180-190
Liu, Jian / Wu, Chengqing / Su, Yu / Li, Jun / Shao, Ruizhe / Chen, Gang / Liu, Zhongxian	Experimental and numerical studies of ultra-high performance concrete targets against high-velocity projectile impacts	166-179
Ricci, Paolo / Di Domenico, Mariano / Verderame, Gerardo M.	Experimental assessment of the in-plane/out-of-plane interaction in unreinforced masonry infill walls	960-978
Jawdhari, Akram / Peiris, Abheetha / Harik, Issam	Experimental study on RC beams strengthened with CFRP rod panels	693-705
Zhang, Xihong / Hao, Hong / Li, Chao / Do, Tin Van	Experimental study on the behavior of precast segmental column with domed shear key and unbonded Post-Tensioning tendon under impact loading	589-605
Cai, Jingming / Pan, Jinlong / Su, Hao / Lu, Cong	Experimental study on the hysteretic behavior of ECC-encased CFST columns	107-121
Galassi, Stefano / Misseri, Giulia / Rovero, Luisa / Tempesta, Giacomo	Failure modes prediction of masonry voussoir arches on moving supports	706-717
Riveros, Guillermo A. / Mahmoud, Hussam / Lozano, Christine M.	Fatigue repair of underwater navigation steel structures using Carbon Fiber Reinforced Polymer (CFRP)	718-728
Yin, Hao / Shi, Gang	Finite element analysis on the seismic behavior of fully prefabricated steel frames	28-51
Truong, Gia Toai / Lee, Hye-Hak / Choi, Kyoung-Kyu	Flexural behavior of RC beams strengthened with NSM GFRP strips after exposed to high temperatures	203-215
Richards, Paul W. / Barnwell, Nick V. / Tryon, Joshua E. / Sadler, Ashley L.	Flexural strength and stiffness of block-out connections for steel columns	404-415
Cao, Dongxing / Gao, Yanhui / Yao, Minghui / Zhang, Wei	Free vibration of axially functionally graded beams using the asymptotic development method	442-448
Chou, Chung-Che / Beato, Alexis Rafael Ovalle	Gusset design considering buckling forces in frame and brace action directions: Test and finite element analysis of a self-centering braced frame for verification	643-655
Seok, Seungwook / Haikal, Ghadir / Ramirez, Julio A. / Lowes, Laura N.	High-resolution finite element modeling for bond in high-strength concrete beam	918-932
Kusano, Ibuki / Baldomir, Aitor / Jurado, José Ángel / Hernández, Santiago	The importance of correlation among flutter derivatives for the reliability based optimum design of suspension bridges	416-428
Witek, Maciej / Batura, Anatolii / Orynyak, Igor / Borodii, Mykhailo	An integrated risk assessment of onshore gas transmission pipelines based on defect population	150-165
Buitrago, Manuel / Adam, José M. / Calderón, Pedro A. / Moragues, Juan J.	Load limiters on shores: Design and experimental research	1029-1038
Buitrago, Manuel / Adam, José M. / Moragues, Juan J. / Calderón, Pedro A.	Load transmission between slabs and shores during the construction of RC building structures – A review	951-959
Ye, C. / Acikgoz, S. / Pendrigh, S. / Riley, E. / DeJong, M. J.	Mapping deformations and inferring movements of masonry arch bridges using point cloud data	530-545
Casey, C. D. / Harvey, P. S. / Song, W.	Multi-unit rolling isolation system arrays: Analytical model and sensitivity analysis	656-668
Qu, Hongya / Li, Tiantian / Chen, Genda	Multiple analytical mode decompositions for nonlinear system identification from forced vibration	979-986
Díaz, E. / Robles, P. / Tomás, R.	Multitechnical approach for damage assessment and reinforcement of buildings located on subsiding areas: Study case of a 7-story RC building in Murcia (SE Spain)	744-757
Keshmiri, Alireza / Wu, Nan / Wang, Quan	A new nonlinearly tapered FGM piezoelectric energy harvester	52-60
Meisami, Farhad / Moavenian, Majid / Afsharfard, Aref	Nonlinear behavior of single bolted flange joints: A novel analytical model	908-917
Mortazavi, Maryam / Heo, YeongAe	Nonlinear dynamic response of steel materials and plain plate systems to impact loads: Review and validation	758-767
Soares, Delfim / Großeholz, Georg	Nonlinear structural dynamic analysis by a stabilized central difference method	383-392
Siano, Rossella / Roca, Pere / Camata, Guido / Pelà, Luca / Sepe, Vincenzo / Spacone, Enrico / Petracca, Massimo	Numerical investigation of non-linear equivalent-frame models for regular masonry walls	512-529
Ji, Yongcheng / Kim, Yail J.	Numerical investigations into the behavior of light rail bridges	216-230
Fang, Ming / Li, Tianyu	On the geometry design of the stiffened pipe structure: A finite element model	853-869
Saitua, Felipe / Lopez-Garcia, Diego / Taflanidis, Alexandros A.	Optimization of height-wise damper distributions considering practical design issues	768-786
Sadeghi Marzaleh, Abdollah / Nerbano, Stella / Sebastiani Croce, Andrea / Steiger, René	OSB sheathed light-frame timber shear walls with strong anchorage subjected to vertical load, bending moment, and monotonic lateral load	787-799
Pourfalah, Saeed / Cotsovos, Demetrios M. / Suryanto, Benny / Moatamedi, Mojtaba	Out-of-plane behaviour of masonry specimens strengthened with ECC under impact loading	1002-1018
Gourav, K. / Venkatarama Reddy, B. V.	Out-of-plane flexure behaviour of fly ash-lime-gypsum brick masonry walls	241-250
De Angelis, Alessandra / Pecce, Maria Rosaria	Out-of-plane structural identification of a masonry infill wall inside beam-column RC frames	546-558
Rizzo, Fabio / Barbato, Michele / Sepe, Vincenzo	Peak factor statistics of wind effects for hyperbolic paraboloid roofs	313-330
Fan, Wei / Xu, Xin / Zhang, Zhiyong / Shao, Xudong	Performance and sensitivity analysis of UHPFRC-strengthened bridge columns subjected to vehicle collisions	251-268
Kruszewski, Dominic / Wille, Kay / Zaghi, Arash E.	Push-out behavior of headed shear studs welded on thin plates and embedded in UHPC	429-441
Adam, José M. / Parisi, Fulvio / Sagaseta, Juan / Lu, Xinzheng	Research and practice on progressive collapse and robustness of building structures in the 21st century	122-149
Zhang, Ailin / Ma, Xiaofei / Fang, Hao / Mu, Junlin / Liu, Tingyong	Seismic behaviour of connections between prefabricated RC flat slabs and square steel tube columns	800-812
Blasi, Gianni / Aiello, Maria Antonietta / Maddaloni, Giuseppe / Pecce, Maria Rosaria	Seismic response evaluation of medical gas and fire-protection pipelines' Tee-Joints	1039-1053
Blebo, Felix C. / Roke, David A.	Seismic-resistant self-centering rocking core system with buckling restrained columns	372-382
Nezami, Saman / Lee, Soobum / Jin, Jiwon / Kang, Ki-Weon	Shape optimization of railroad vibration energy harvester for structural robustness and power generation performance	460-471
Loss, Cristiano / Hossain, Afrin / Tannert, Thomas	Simple cross-laminated timber shear connections with spatially arranged screws	340-356
Shen, Kongjian / Wan, Shui / Mo, Y. L. / Li, Xiayuan / Song, Aiming	A softened membrane model for composite box-girders with corrugated steel webs under pure torsion	357-371
Tomeo, Romeo / Pitilakis, Dimitris / Bilotta, Antonio / Nigro, Emidio	SSI effects on seismic demand of reinforced concrete moment resisting frames	559-572
Li, M. / Zhao, X. / Li, X. / Chang, X. P. / Li, Y. H.	Stability analysis of oil-conveying pipes on two-parameter foundations with generalized boundary condition by means of Green's functions	300-312
Ferrotto, M. F. / Fischer, O. / Cavaleri, L.	A strategy for the finite element modeling of FRP-confined concrete columns subjected to preload	1054-1067
Lin, Siqi / Zhao, Yan-Gang / He, Liusheng	Stress paths of confined concrete in axially loaded circular concrete-filled steel tube stub columns	1019-1028
Hassanein, M. F. / Patel, V. I. / El Hadidy, A. M. / Al Abadi, H. / Elchalakani, Mohamed	Structural behaviour and design of elliptical high-strength concrete-filled steel tubular short compression members	495-511
Sychterz, Ann C. / Smith, Ian F. C.	Using dynamic measurements to detect and locate ruptured cables on a tensegrity structure	631-642
Senjanović, Ivo / Alujević, Neven / Ćatipović, Ivan / Čakmak, Damjan / Vladimir, Nikola	Vibration analysis of rotating toroidal shell by the Rayleigh-Ritz method and Fourier series	870-891
Wang, Wenxi / Wang, Xiuyong / Hua, Xugang / Song, Gangbing / Chen, Zhengqing	Vibration control of vortex-induced vibrations of a bridge deck by a single-side pounding tuned mass damper	61-75
Fu, Ji-Yang / Wu, Ben-Gang / Wu, Jiu-Rong / Deng, Ting / Pi, Yong-Lin / Xie, Zhuang-Ning	Wind resistant size optimization of geometrically nonlinear lattice structures using a modified optimality criterion method	573-588

About this
data sheet
IssueID
18062
Published on:
02/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - October 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - October 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.