Engineering Structures - December 2014

Published:	December 2014

Articles in this Issue

Author(s)	Title	Page(s)
Riera, Jorge Daniel / Miguel, Letícia Fleck Fadel / Iturrioz, Ignacio	Assessment of Brazilian tensile test by means of the truss-like Discrete Element Method (DEM) with imperfect mesh	10-21
Lam, H. F. / Hu, Q. / Wong, M. T.	The Bayesian methodology for the detection of railway ballast damage under a concrete sleeper	289-301
Lin, Zhaofei / Liu, Yuqing / He, Jun	Behavior of stud connectors under combined shear and tension loads	362-376
LeBorgne, M. R. / Ghannoum, W. M.	Calibrated analytical element for lateral-strength degradation of reinforced concrete columns	35-48
Conceição, José / Faria, Rui / Azenha, Miguel / Mamede, Flávio / Souza, Flávio	Early-age behaviour of the concrete surrounding a turbine spiral case: Monitoring and thermo-mechanical modelling	327-340
Hu, Y. / Baniotopoulos, C. / Yang, J.	Effect of internal stiffening rings and wall thickness on the structural response of steel wind turbine towers	148-161
Roh, Hwasung / Ou, Yu-Chen / Kim, Jinkyu / Kim, WooSeok	Effect of yielding level and post-yielding stiffness ratio of ED bars on seismic performance of PT rocking bridge piers	454-463
Ogueta-Gutiérrez, M. / Franchini, S. / Alonso, G.	Effects of bird protection barriers on the aerodynamic and aeroelastic behaviour of high speed train bridges	22-34
Shafaei, Jalil / Zareian, Mohammad Sajjad / Hosseini, Abdollah / Marefat, Mohammad Sadegh	Effects of joint flexibility on lateral response of reinforced concrete frames	412-431
Nandan, Harsh / Singh, Mahendra P.	Effects of thermal environment on structural frequencies: Part I – A simulation study	480-490
Nandan, Harsh / Singh, Mahendra P.	Effects of thermal environment on structural frequencies: Part II – A system identification model	491-498
Khampanit, Amnart / Leelataviwat, Sutat / Kochanin, Jensak / Warnitchai, Pennung	Energy-based seismic strengthening design of non-ductile reinforced concrete frames using buckling-restrained braces	110-122
Gong, Kuangmin / Ding, Jie / Chen, Xinzhong	Estimation of long-term extreme response of operational and parked wind turbines: Validation and some new insights	135-147
Vessby, Johan / Källsner, Bo / Olsson, Anders / Girhammar, Ulf Arne	Evaluation of softening behaviour of timber light-frame walls subjected to in-plane forces using simple FE models	464-479
Moreira, Susana / Ramos, Luís F. / Oliveira, Daniel V. / Lourenço, Paulo B.	Experimental behavior of masonry wall-to-timber elements connections strengthened with injection anchors	98-109
D'Amico, B. / Kermani, A. / Zhang, H.	Form finding and structural analysis of actively bent timber grid shells	195-207
Malekjafarian, A. / OBrien, E. J.	Identification of bridge mode shapes using Short Time Frequency Domain Decomposition of the responses measured in a passing vehicle	386-397
Yu, Jiayong / Meng, Xiaolin / Shao, Xudong / Yan, Banfu / Yang, Lei	Identification of dynamic displacements and modal frequencies of a medium-span suspension bridge using multimode GNSS processing	432-443
Song, Ruiqiang / Li, Yue / van de Lindt, John W.	Impact of earthquake ground motion characteristics on collapse risk of post-mainshock buildings considering aftershocks	349-361
Abidelah, Anis / Bouchaïr, Abdelhamid / Kerdal, Djamel Elddine	Influence of the flexural rigidity of the bolt on the behavior of the T-stub steel connection	181-194
Curadelli, O. / Amani, M.	Integrated structure-passive control design of linear structures under seismic excitations	256-264
Ed-dinari, Aberrahmane / Mottaqui, Hicham / Braikat, Bouazza / Jamal, Mohammad / Mohri, Foudil / Damil, Noureddine	Large torsion analysis of thin-walled open sections beams by the Asymptotic Numerical Method	240-255
Ibrahim, Sherif A.	Lateral torsional buckling strength of unsymmetrical plate girders with corrugated webs	123-134
Dias-Da-Costa, D. / Carmo, R. N. F. / Graça-e-Costa, R. / Valença, J. / Alfaiate, J.	Longitudinal reinforcement ratio in lightweight aggregate concrete beams	219-229
Xu, Qingfeng / Harries, Kent / Li, Xiangmin / Liu, Qiong / Gottron, Jennifer	Mechanical properties of structural bamboo following immersion in water	230-239
Pagani, Roberto / Bocciarelli, Massimiliano / Carvelli, Valter / Pisani, Marco Andrea	Modelling high temperature effects on bridge slabs reinforced with GFRP rebars	318-326
Shin, Jinwon / Whittaker, Andrew S. / Cormie, David / Wilkinson, Will	Numerical modeling of close-in detonations of high explosives	88-97
Viet, L. D. / Nghi, N. B.	On a nonlinear single-mass two-frequency pendulum tuned mass damper to reduce horizontal vibration	175-180
Kozmar, Hrvoje / Procino, Lorenzo / Borsani, Alessandra / Bartoli, Gianni	Optimizing height and porosity of roadway wind barriers for viaducts and bridges	49-61
Zheng, Jian-Jun / Dai, Jian-Guo	Prediction of the nonlinear pull-out response of FRP ground anchors using an analytical transfer matrix method	377-385
Mahdavipour, M. A. / Deylami, A.	Probabilistic assessment of strain hardening ratio effect on residual deformation demands of Buckling-Restrained Braced Frames	302-308
Moharrami, M. / Tootkaboni, M.	Reducing response of offshore platforms to wave loads using hydrodynamic buoyant mass dampers	162-174
Azinović, Boris / Koren, David / Kilar, Vojko	The seismic response of low-energy buildings founded on a thermal insulation layer – A parametric study	398-411
Shafaei, Jalil / Hosseini, Abdollah / Marefat, Mohammad Sadegh	Seismic retrofit of external RC beam–column joints by joint enlargement using prestressed steel angles	265-288
Colajanni, Piero / La Mendola, Lidia / Mancini, Giuseppe / Recupero, Antonino / Spinella, Nino	Shear capacity in concrete beams reinforced by stirrups with two different inclinations	444-453
Breveglieri, Matteo / Aprile, Alessandra / Barros, Joaquim A. O.	Shear strengthening of reinforced concrete beams strengthened using embedded through section steel bars	76-87
Thenozhi, Suresh / Yu, Wen	Stability analysis of active vibration control of building structures using PD/PID control	208-218
Bednarz, Łukasz J. / Jasienko, Jerzy / Rutkowski, Marcin / Nowak, Tomasz P.	Strengthening and long-term monitoring of the structure of an historical church presbytery	62-75
Terán-Guillén, J. / Cicero, S. / Garcia, T. / Alvarez, J. A. / Martínez-Madrid, M. / Pérez-Quiroz, J. T.	Structural integrity assessment of the cast steel upper anchorage elements used in a cable stayed bridge	309-317
Zhang, Hao / Ellingwood, Bruce R. / Rasmussen, Kim J. R.	System reliabilities in steel structural frame design by inelastic analysis	341-348
Cai, Yancheng / Young, Ben	Transient state tests of cold-formed stainless steel single shear bolted connections	1-9

About this
data sheet
IssueID
17960
Published on:
01/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - December 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - December 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.