Engineering Structures - July 2017

Published:	July 2017

Articles in this Issue

Author(s)	Title	Page(s)
Martin, P.-O. / Couchaux, M. / Vassart, O. / Bureau, A.	An analytical method for the resistance of cellular beams with sinusoidal openings	113-126
Fernandes, Walliston S. / Greco, Marcelo / Almeida, Valério S.	Application of the smooth evolutionary structural optimization method combined with a multi-criteria decision procedure	40-51
Kalamar, Roman / Bedon, Chiara / Eliášová, Martina	Assessing the structural behaviour of square hollow glass columns subjected to combined compressive and impact loads via full-scale experiments	127-140
Cambronero-Barrientos, Francisco / Díaz-del-Valle, Julián / Martínez-Martínez, José-Antonio	Beam element for thin-walled beams with torsion, distortion, and shear lag	571-588
Nikolić, Aleksandar / Šalinić, Slaviša	Buckling analysis of non-prismatic columns: A rigid multibody approach	511-521
Emadali, Lotfollah / Motagh, Mahdi / Haghshenas Haghighi, Mahmud	Characterizing post-construction settlement of the Masjed-Soleyman embankment dam, Southwest Iran, using TerraSAR-X SpotLight radar imagery	261-273
Micallef, M. / Vollum, R. L. / Izzuddin, B. A.	Crack development in transverse loaded base-restrained reinforced concrete walls	522-539
Paraskeva, T. S. / Grigoropoulos, G. / Dimitrakopoulos, E. G.	Design and experimental verification of easily constructible bamboo footbridges for rural areas	540-548
Nasiri, Ehsan / Liu, Yi	Development of a detailed 3D FE model for analysis of the in-plane behaviour of masonry infilled concrete frames	603-616
Menkulasi, Fatmir / Kuruppuarachchi, Dinesha	Development of alternative concrete bridge superstructure systems for short and medium span bridges	274-294
Habte, Filmon / Chowdhury, Arindam Gan / Zisis, Ioannis	Effect of wind-induced internal pressure on local frame forces of low-rise buildings	455-468
Lee, Jong-Han	Evaluation of the lateral stability of precast beams on an elastic bearing support with a consideration of the initial sweep	101-112
Howson, W. P. / Watson, A.	Exact eigensolution of a class of multi-level elastically connected members	375-383
Kang, Shao-Bo / Tan, Kang Hai / Zhou, Xu-Hong / Yang, Bo	Experimental investigation on shear strength of engineered cementitious composites	141-151
Thi, V. D. / Khelifa, M. / Oudjene, M. / Ganaoui, M. El / Rogaume, Y.	Finite element analysis of heat transfer through timber elements exposed to fire	11-21
Gohar, Samar / Afefy, Hamdy M. / Kassem, Nesreen M. / Taher, Salah El-Din F.	Flexural performance of self-compacted perforated concrete beams under repeated loading	441-454
Nordhagen, H. O. / Munkejord, S. T. / Hammer, M. / Gruben, G. / Fourmeau, M. / Dumoulin, S.	A fracture-propagation-control model for pipelines transportingCO2-rich mixtures including a new method for material-model calibration	245-260
de Waal, Leo / Fernando, Dilum / Nguyen, Van Thuan / Cork, Ryan / Foote, Jack	FRP strengthening of 60 year old pre-stressed concrete bridge deck units	346-357
Javidan, Fatemeh / Heidarpour, Amin / Zhao, Xiao-Ling / Fallahi, Hossein	Fundamental behaviour of high strength and ultra-high strength steel subjected to low cycle structural damage	427-440
Sideris, Petros / Nikoukalam, M. T. / Salehi, M.	A generalized normal flow method with online step controls for pushover analysis of nonlinear softening structures	232-244
Liu, Yang / Yang, Changxi / Tan, Zhicheng	Hybrid element-based virtual distortion method for finite element model updating of bridges with wide-box girders	558-570
Hester, David / Brownjohn, James / Bocian, Mateusz / Xu, Yan	Low cost bridge load test: Calculating bridge displacement from acceleration for load assessment calculations	358-374
Petrović, Miloš / Mojsilović, Nebojša / Stojadinović, Božidar	Masonry walls with a multi-layer bed joint subjected to in-plane cyclic loading: An experimental investigation	189-203
Morsy, R. / Marzouk, H. / Haddara, M. / Gu, X.	Multi-channel random decrement smart sensing system for concrete bridge girders damage location identification	469-476
Ko, Junyoung / Cho, Jaeyeon / Jeong, Sangseom	Nonlinear 3D interactive analysis of superstructure and piled raft foundation	204-218
Kataoka, Marcela Novischi / Ferreira, Marcelo Araújo / de Cresce El Debs, Ana Lúcia Homce	Nonlinear FE analysis of slab-beam-column connection in precast concrete structures	306-315
Lu, Yiqiu / Henry, Richard S.	Numerical modelling of reinforced concrete walls with minimum vertical reinforcement	330-345
Torres, Wilson / Almazán, José Luis / Sandoval, Cristián / Boroschek, Ruben	Operational modal analysis and FE model updating of the Metropolitan Cathedral of Santiago, Chile	169-188
Tessari, Rodolfo K. / Kroetz, Henrique M. / Beck, André T.	Performance-based design of steel towers subject to wind action	549-557
Kanyilmaz, Alper / Castiglioni, Carlo Andrea	Reducing the seismic vulnerability of existing elevated silos by means of base isolation devices	477-497
Yang, Y. B. / Yau, J. D.	Resonance of high-speed trains moving over a series of simple or continuous beams with non-ballasted tracks	295-305
Guo, Yu-Tao / Tao, Mu-Xuan / Nie, Xin / Fan, Jian-Sheng	Rigidity and moment distribution of steel-concrete composite waffle floor systems considering the spatial effect	498-510
Du, Zuo-Lei / Liu, Yao-Peng / Chan, Siu-Lai	A second-order flexibility-based beam-column element with member imperfection	410-426
Greco, A. / Cannizzaro, F. / Pluchino, A.	Seismic collapse prediction of frame structures by means of genetic algorithms	152-168
Sasmal, Saptarshi / Nath, Dikshita	Seismic performance of non-invasive single brace made of steel and shape memory alloy for retrofit of gravity load designed sub-assemblages	316-329
Yun, Hyun-Do / Kim, Sun-Woo / Park, Wan-Shin / Jang, Young-Il	Shear behavior of strain-hardening cement composite walls under quasi-static cyclic loading	398-409
Zhang, Zhongwen / Li, Bing	Shear lag effect in tension flange of RC walls with flanged sections	64-76
Gottsäter, Erik / Larsson Ivanov, Oskar / Molnár, Miklós / Crocetti, Roberto / Nilenius, Filip / Plos, Mario	Simulation of thermal load distribution in portal frame bridges	219-231
Leitner, M. / Khurshid, M. / Barsoum, Z.	Stability of high frequency mechanical impact (HFMI) post-treatment induced residual stress states under cyclic loading of welded steel joints	589-602
Pan, Yi / Rui, Guo / Li, Hongyi / Tang, Hongyuan / Xu, Long	Study on stress-strain relation of concrete confined by CFRP under preload	52-63
Vu, Van D. / Mir, Arash / Nguyen, Giang D. / Sheikh, Abdul Hamid	A thermodynamics-based formulation for constitutive modelling using damage mechanics and plasticity theory	22-39
Kwan, A. K. H. / Ma, F. J.	Two-dimensional early thermal crack analysis of concrete structures by finite element method	1-10
Steensels, R. / Vandewalle, L. / Vandoren, B. / Degee, H.	A two-stage modelling approach for the analysis of the stress distribution in anchorage zones of pre-tensioned, concrete elements	384-397
Su, J. Z. / Xia, Y. / Zhu, L. D. / Zhu, H. P. / Ni, Y. Q.	Typhoon- and temperature-induced quasi-static responses of a supertall structure	91-100
Odijie, Agbomerie Charles / Quayle, Stephen / Ye, Jianqiao	Wave induced stress profile on a paired column semisubmersible hull formation for column reinforcement	77-90

About this
data sheet
IssueID
17951
Published on:
04/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - July 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - July 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.