Engineering Structures - September 2014

Published:	September 2014

Articles in this Issue

Author(s)	Title	Page(s)
Chen, Xinzhong	Analysis of crosswind fatigue of wind-excited structures with nonlinear aerodynamic damping	145-156
Rebelo, C. / Moura, A. / Gervásio, H. / Veljkovic, M. / Simões da Silva, L.	Comparative life cycle assessment of tubular wind towers and foundations – Part 1: Structural design	283-291
Gervásio, H. / Rebelo, C. / Moura, A. / Veljkovic, M. / Simões da Silva, L.	Comparative life cycle assessment of tubular wind towers and foundations – Part 2: Life cycle analysis	292-299
Zhang, Shenwei / Zhou, Wenxing	Cost-based optimal maintenance decisions for corroding natural gas pipelines based on stochastic degradation models	74-85
Akisanya, A. R. / Ivanović, A.	Debonding along the fixed anchor length of a ground anchorage	23-31
Makkonen, Lasse / Lehtonen, Pertti / Hirviniemi, Mika	Determining ice loads for tower structure design	229-232
Pi, Yong-Lin / Bradford, Mark Andrew	Effects of nonlinearity and temperature field on in-plane behaviour and buckling of crown-pinned steel arches	1-12
De Luca, Flavia / Verderame, Gerardo M. / Manfredi, Gaetano	Eurocode-based seismic assessment of modern heritage RC structures: The case of the Tower of the Nations in Naples (Italy)	96-110
Van Engelen, Niel C. / Osgooei, Peyman M. / Tait, Michael J. / Konstantinidis, Dimitrios	Experimental and finite element study on the compression properties of Modified Rectangular Fiber-Reinforced Elastomeric Isolators (MR-FREIs)	52-64
Papastergiou, Dimitrios / Lebet, Jean-Paul	Experimental investigation and modelling of the structural behaviour of confined grouted interfaces for a new steel–concrete connection	180-192
Jaeger, Thomas	Extended sandwich model for reinforced concrete slabs: Shear strength with transverse reinforcement	218-228
Goel, S. / Singh, S. P.	Fatigue performance of plain and steel fibre reinforced self compacting concrete using S–N relationship	65-73
Siqueira, Gustavo H. / Sanda, Adamou S. / Paultre, Patrick / Padgett, Jamie E.	Fragility curves for isolated bridges in eastern Canada using experimental results	311-324
Wang, Peijun / Ma, Qijie / Wang, Xudong	Investigation on Vierendeel mechanism failure of castellated steel beams with fillet corner web openings	44-51
Pavković, Krunoslav / Rajčić, Vlatka / Haiman, Miljenko	Large diameter fastener in locally reinforced and non-reinforced timber loaded perpendicular to grain	256-265
Bernat-Maso, Ernest / Gil, Lluís / Roca, Pere / Sarrablo, Vicenç / Puigvert, Francesc	Mechanical characterisation of Textile Ceramic plates. Testing on elastic foundations	193-204
Shin, H. / Singh, M. P.	Minimum failure cost-based energy dissipation system designs for buildings in three seismic regions – Part I: Elements of failure cost analysis	266-274
Shin, H. / Singh, M. P.	Minimum failure cost-based energy dissipation system designs for buildings in three seismic regions – Part II: Application to viscous dampers	275-282
Canha, Rejane Martins Fernandes / Kuchma, Daniel Alexander / El Debs, Mounir Khalil / de Souza, Rafael Alves	Numerical analysis of reinforced high strength concrete corbels	130-144
Long, X. / Bao, J. Q. / Tan, K. H. / Lee, C. K.	Numerical simulation of reinforced concrete beam/column failure considering normal-shear stress interaction	32-43
Lee, Soobum / Tovar, Andrés	Outrigger placement in tall buildings using topology optimization	122-129
Siqueira, Gustavo H. / Tavares, Danusa H. / Paultre, Patrick / Padgett, Jamie E.	Performance evaluation of natural rubber seismic isolators as a retrofit measure for typical multi-span concrete bridges in eastern Canada	300-310
Bobby, Sarah / Spence, Seymour M. J. / Bernardini, Enrica / Kareem, Ahsan	Performance-based topology optimization for wind-excited tall buildings: A framework	242-255
Tabandeh, Armin / Gardoni, Paolo	Probabilistic capacity models and fragility estimates for RC columns retrofitted with FRP composites	13-22
Sharma, Hrishikesh / Gardoni, Paolo / Hurlebaus, Stefan	Probabilistic demand model and performance-based fragility estimates for RC column subject to vehicle collision	86-95
Hu, Nan / Dai, Gong-Lian / Yan, Bin / Liu, Ke	Recent development of design and construction of medium and long span high-speed railway bridges in China	233-241
Jara, J. M. / López, M. G. / Jara, M. / Olmos, B. A.	Rotation and damage index demands for RC medium-length span bridges	205-217
Ohsaki, Makoto / Iwatsuki, Osamu / Watanabe, Hidekazu	Seismic response of building frames with flexible base optimized for reverse rocking response	170-179
Hassanein, M. F. / Kharoob, O. F.	Shear buckling behavior of tapered bridge girders with steel corrugated webs	157-169
Lui, Wing-Man / Ashraf, Mahmud / Young, Ben	Tests of cold-formed duplex stainless steel SHS beam–columns	111-121

About this
data sheet
IssueID
17946
Published on:
04/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - September 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - September 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.