Engineering Structures - September 2015

Published:	September 2015

Author(s)	Title	Page(s)
Shokrabadi, Mehrdad / Banazadeh, Mehdi / Shokrabadi, Mehran / Mellati, Afshin	Assessment of seismic risks in code conforming reinforced concrete frames	14-28
Hwang, Hyeon-Jong / Eom, Tae-Sung / Park, Hong-Gun	Design considerations for interior RC beam–column joint with additional bars	1-13
Tan, P. / Fang, C. J. / Chang, C. M. / Spencer, B. F. / Zhou, F. L.	Dynamic characteristics of novel energy dissipation systems with damped outriggers	128-140
Baran, Eray	Effects of cast-in-place concrete topping on flexural response of precast concrete hollow-core slabs	109-117
Huang, Q. / Xu, Y. L. / Liu, H. J.	An efficient algorithm for simultaneous identification of time-varying structural parameters and unknown excitations of a building structure	29-37
Jara, J. M. / Reynoso, J. R. / Olmos, B. A. / Jara, M.	Expected seismic performance of irregular medium-span simply supported bridges on soft and hard soils	174-185
Chen, An / Norris, Thomas G. / Hopkins, Paul M. / Yossef, Mostafa	Experimental investigation and finite element analysis of flexural behavior of insulated concrete sandwich panels with FRP plate shear connectors	95-108
Guo, Yan-Lin / Zhao, Si-Yuan / Pi, Yong-Lin / Bradford, Mark Andrew / Dou, Chao	An experimental study on out-of-plane inelastic buckling strength of fixed steel arches	118-127
Li, Xiaowei / Zhao, Junhai / Ma, Guowei / Chen, Wei	Experimental study on the seismic performance of a double-span traditional timber frame	141-150
Genikomsou, Aikaterini S. / Polak, Maria Anna	Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS	38-48
Pavlović, Marko / Heistermann, Christine / Veljković, Milan / Pak, Daniel / Feldmann, Markus / Rebelo, Carlos / da Silva, Luís Simões	Friction connection vs. ring flange connection in steel towers for wind converters	151-162
Füssl, J. / Kluger-Eigl, W. / Blab, R.	Mechanical performance of pavement structures with paving slabs – Part I: Full-scale accelerated tests as validation for a numerical simulation tool	212-220
Füssl, J. / Kluger-Eigl, W. / Eberhardsteiner, L. / Blab, R.	Mechanical performance of pavement structures with paving slabs – Part II: Numerical simulation tool validated by means of full-scale accelerated tests	221-229
Jiang, Youbao / Sun, Guoheng / He, Yihua / Beer, Michael / Zhang, Jianren	A nonlinear model of failure function for reliability analysis of RC frame columns with tension failure	74-80
Kang, Shao-Bo / Tan, Kang Hai / Yang, En-Hua	Progressive collapse resistance of precast beam–column sub-assemblages with engineered cementitious composites	186-200
Zafar, Adeel / Andrawes, Bassem	Seismic behavior of SMA–FRP reinforced concrete frames under sequential seismic hazard	163-173
Colombo, J. I. / Almazán, J. L.	Seismic reliability of continuously supported steel wine storage tanks retrofitted with energy dissipation devices	201-211
Moustafa, Mohamed A. / Mosalam, Khalid M.	Seismic response of bent caps in as-built and retrofitted reinforced concrete box-girder bridges	59-73
Alessandri, S. / Giannini, R. / Paolacci, F. / Malena, M.	Seismic retrofitting of an HV circuit breaker using base isolation with wire ropes. Part 1: Preliminary tests and analyses	251-262
Alessandri, S. / Giannini, R. / Paolacci, F. / Amoretti, M. / Freddo, A.	Seismic retrofitting of an HV circuit breaker using base isolation with wire ropes. Part 2: Shaking-table test validation	263-274
Gil, Beatriz / Bijlaard, Frans / Bayo, Eduardo	T-stub behavior under out-of-plane bending. II: Parametric study and analytical characterization	241-250
Gil, Beatriz / Goñi, Rufino	T-stub behaviour under out-of-plane bending. I: Experimental research and finite element modelling	230-240
Wang, Gaohui / Wang, Yongxiang / Lu, Wenbo / Zhou, Chuangbing / Chen, Ming / Yan, Peng	XFEM based seismic potential failure mode analysis of concrete gravity dam–water–foundation systems through incremental dynamic analysis	81-94

Author(s)

Title

Page(s)

Shokrabadi, Mehrdad / Banazadeh, Mehdi / Shokrabadi, Mehran / Mellati, Afshin

Assessment of seismic risks in code conforming reinforced concrete frames

14-28

Hwang, Hyeon-Jong / Eom, Tae-Sung / Park, Hong-Gun

Design considerations for interior RC beam–column joint with additional bars

1-13

Tan, P. / Fang, C. J. / Chang, C. M. / Spencer, B. F. / Zhou, F. L.

Dynamic characteristics of novel energy dissipation systems with damped outriggers

128-140