Engineering Structures - February 2015

Published:	February 2015

Author(s)	Title	Page(s)
Ramos, Luís F. / Miranda, Tiago / Mishra, Mayank / Fernandes, Francisco M. / Manning, Elizabeth	A Bayesian approach for NDT data fusion: The Saint Torcato church case study	120-129
Tannous, Mikhael / Cartraud, Patrice / Dureisseix, David / Torkhani, Mohamed	A beam to 3D model switch for rotor dynamics applications	54-66
Wan, Hong-Xia / Mahendran, Mahen	Bending and torsion of hollow flange channel beams	300-312
Fernandes, Pedro M. G. / Silva, Patrícia M. / Sena-Cruz, José	Bond and flexural behavior of concrete elements strengthened with NSM CFRP laminate strips under fatigue loading	350-361
Gong, Shunfeng / Li, Gen	Buckle propagation of pipe-in-pipe systems under external pressure	207-222
Castellazzi, G. / de Miranda, S. / Formica, G. / Molari, L. / Ubertini, F.	Coupled hygro-mechanical multiscale analysis of masonry walls	266-278
Larosche, Aaron / Ziehl, Paul / Mangual, Jese / ElBatanouny, Mohamed K.	Damage evaluation of prestressed piles to cast in place bent cap connections with Acoustic Emission	184-194
Ghafoori, E. / Motavalli, M. / Nussbaumer, A. / Herwig, A. / Prinz, G. S. / Fontana, M.	Determination of minimum CFRP pre-stress levels for fatigue crack prevention in retrofitted metallic beams	29-41
Ahmari, Saeed / Yang, Mijia / Zhong, Hai	Dynamic interaction between vehicle and bridge deck subjected to support settlement	172-183
Settineri, D.	An effective method for the evaluation of the pdf response of dynamic systems subjected to non-stationary loads	419-429
Siekierski, Wojciech	An efficient method for analysis of service load stresses in bridge gusset plates	152-161
Feau, Cyril / Politopoulos, Ioannis / Kamaris, George S. / Mathey, Charlie / Chaudat, Thierry / Nahas, Georges	Experimental and numerical investigation of the earthquake response of crane bridges	89-101
Schanack, Frank / Ramos, Óscar Ramón / Reyes, Juan Patricio / Alvarado Low, Andrés	Experimental study on the influence of concrete cracking on timber concrete composite beams	362-367
Fontanari, V. / Benedetti, M. / Monelli, B. D. / Degasperi, F.	Fire behavior of steel wire ropes: Experimental investigation and numerical analysis	340-349
Amina, Tahar Berrabah / Mohamed, Belharizi / André, Laulusa / Abdelmalek, Bekkouche	Fluid–structure interaction of Brezina arch dam: 3D modal analysis	19-28
Vieira, R. F. / Virtuoso, F. B. E. / Pereira, E. B. R.	A higher order beam model for thin-walled structures with in-plane rigid cross-sections	1-18
Bock, Sławomir	Impact of shaft steelwork on grain size distribution of filling material during shaft closure based on the DEM simulations	102-119
Mohamed, Nedal / Soliman, Ahmed M. / Nehdi, Moncef L.	Mechanical performance of full-scale precast steel fibre-reinforced concrete pipes	287-299
Bosco, Melina / Marino, Edoardo M. / Rossi, Pier Paolo	Modelling of steel link beams of short, intermediate or long length	406-418
Ružić, D. / Kolšek, J. / Planinc, I. / Saje, M. / Hozjan, T.	Non-linear fire analysis of restrained curved RC beams	130-139
Cao, Bochao / Sarkar, Partha P.	Numerical simulation of dynamic response of a long-span bridge to assess its vulnerability to non-synoptic wind	67-75
Yang, Qiao Jie / Hayman, Brian	Prediction of post-buckling and ultimate compressive strength of composite plates by semi-analytical methods	42-53
Fiorino, Luigi / Landolfo, Raffaele / Mazzolani, Federico Massimo	The refurbishment of gasometers as a relevant witness of industrial archaeology	252-265
Klemczak, Barbara / Knoppik-Wróbel, Agnieszka	Reinforced concrete tank walls and bridge abutments: Early-age behaviour, analytic approaches and numerical models	233-251
Pimenta, R. J. / Queiroz, G. / Diniz, S. M. C.	Reliability-based design recommendations for sinusoidal-web beams subjected to lateral-torsional buckling	195-206
Dyanati, Mojtaba / Huang, Qindan / Roke, David	Seismic demand models and performance evaluation of self-centering and conventional concentrically braced frames	368-381
Palmisano, Fabrizio / Elia, Angelo	Shape optimization of strut-and-tie models in masonry buildings subjected to landslide-induced settlements	223-232
Kassem, Wael	Shear strength of squat walls: A strut-and-tie model and closed-form design formula	430-438
Guezouli, Samy / Kaing, Sao Serey / Lachal, Alain	A simplified 2D model to study the contact–friction at the interfaces of steel–concrete composite beam-to-beam joint	76-88
Pargana, J. B. / Leitão, V. M. A.	A simplified stress–strain model for coated plain-weave fabrics used in Tensioned Fabric Structures	439-450
Giovanis, Dimitris G. / Papadopoulos, Vissarion	Spectral representation-based neural network assisted stochastic structural mechanics	382-394
Przybylski, Jacek	Static and dynamic analysis of a flextensional transducer with an axial piezoelectric actuation	140-151
Shirmohammadi, Fatemeh / Esmaeily, Asad / Kiaeipour, Zohreh	Stress–strain model for circular concrete columns confined by FRP and conventional lateral steel	395-405
Wang, Shen	Thermal analysis of cylindrical concrete shell at transition boundary between regions with different reinforcement configurations	279-286
Elsharawy, Mohamed / Galal, Khaled / Stathopoulos, Ted	Torsional and shear wind loads on flat-roofed buildings	313-324
Tekgoz, M. / Garbatov, Y. / Guedes Soares, C.	Ultimate strength assessment of welded stiffened plates	325-339
Londoño, Julián M. / Neild, Simon A. / Wagg, David J.	Using a damper amplification factor to increase energy dissipation in structures	162-171

Author(s)

Title

Page(s)

Ramos, Luís F. / Miranda, Tiago / Mishra, Mayank / Fernandes, Francisco M. / Manning, Elizabeth

A Bayesian approach for NDT data fusion: The Saint Torcato church case study

120-129

Tannous, Mikhael / Cartraud, Patrice / Dureisseix, David / Torkhani, Mohamed

A beam to 3D model switch for rotor dynamics applications

54-66

Wan, Hong-Xia / Mahendran, Mahen

Bending and torsion of hollow flange channel beams

300-312

Fernandes, Pedro M. G. / Silva, Patrícia M. / Sena-Cruz, José

Bond and flexural behavior of concrete elements strengthened with NSM CFRP laminate strips under fatigue loading

350-361

Gong, Shunfeng / Li, Gen

Buckle propagation of pipe-in-pipe systems under external pressure

207-222

Castellazzi, G. / de Miranda, S. / Formica, G. / Molari, L. / Ubertini, F.

Coupled hygro-mechanical multiscale analysis of masonry walls

266-278

Larosche, Aaron / Ziehl, Paul / Mangual, Jese / ElBatanouny, Mohamed K.

Damage evaluation of prestressed piles to cast in place bent cap connections with Acoustic Emission

184-194

Ghafoori, E. / Motavalli, M. / Nussbaumer, A. / Herwig, A. / Prinz, G. S. / Fontana, M.

Determination of minimum CFRP pre-stress levels for fatigue crack prevention in retrofitted metallic beams

29-41

Ahmari, Saeed / Yang, Mijia / Zhong, Hai

Dynamic interaction between vehicle and bridge deck subjected to support settlement

172-183

Settineri, D.

An effective method for the evaluation of the pdf response of dynamic systems subjected to non-stationary loads

419-429

Siekierski, Wojciech

An efficient method for analysis of service load stresses in bridge gusset plates

152-161

Feau, Cyril / Politopoulos, Ioannis / Kamaris, George S. / Mathey, Charlie / Chaudat, Thierry / Nahas, Georges

Experimental and numerical investigation of the earthquake response of crane bridges

89-101

Schanack, Frank / Ramos, Óscar Ramón / Reyes, Juan Patricio / Alvarado Low, Andrés

Experimental study on the influence of concrete cracking on timber concrete composite beams

362-367

Fontanari, V. / Benedetti, M. / Monelli, B. D. / Degasperi, F.

Fire behavior of steel wire ropes: Experimental investigation and numerical analysis

340-349

Amina, Tahar Berrabah / Mohamed, Belharizi / André, Laulusa / Abdelmalek, Bekkouche

Fluid–structure interaction of Brezina arch dam: 3D modal analysis

19-28

Vieira, R. F. / Virtuoso, F. B. E. / Pereira, E. B. R.

A higher order beam model for thin-walled structures with in-plane rigid cross-sections

1-18

Bock, Sławomir

Impact of shaft steelwork on grain size distribution of filling material during shaft closure based on the DEM simulations

102-119

Mohamed, Nedal / Soliman, Ahmed M. / Nehdi, Moncef L.

Mechanical performance of full-scale precast steel fibre-reinforced concrete pipes

287-299

Bosco, Melina / Marino, Edoardo M. / Rossi, Pier Paolo

Modelling of steel link beams of short, intermediate or long length

406-418

Ružić, D. / Kolšek, J. / Planinc, I. / Saje, M. / Hozjan, T.

Non-linear fire analysis of restrained curved RC beams

130-139

Cao, Bochao / Sarkar, Partha P.

Numerical simulation of dynamic response of a long-span bridge to assess its vulnerability to non-synoptic wind

67-75

Yang, Qiao Jie / Hayman, Brian

Prediction of post-buckling and ultimate compressive strength of composite plates by semi-analytical methods

42-53

Fiorino, Luigi / Landolfo, Raffaele / Mazzolani, Federico Massimo

The refurbishment of gasometers as a relevant witness of industrial archaeology

252-265

Klemczak, Barbara / Knoppik-Wróbel, Agnieszka

Reinforced concrete tank walls and bridge abutments: Early-age behaviour, analytic approaches and numerical models

233-251

Pimenta, R. J. / Queiroz, G. / Diniz, S. M. C.

Reliability-based design recommendations for sinusoidal-web beams subjected to lateral-torsional buckling

195-206

Dyanati, Mojtaba / Huang, Qindan / Roke, David

Seismic demand models and performance evaluation of self-centering and conventional concentrically braced frames

368-381

Palmisano, Fabrizio / Elia, Angelo

Shape optimization of strut-and-tie models in masonry buildings subjected to landslide-induced settlements

223-232

Kassem, Wael

Shear strength of squat walls: A strut-and-tie model and closed-form design formula

430-438

Guezouli, Samy / Kaing, Sao Serey / Lachal, Alain

A simplified 2D model to study the contact–friction at the interfaces of steel–concrete composite beam-to-beam joint

76-88

Pargana, J. B. / Leitão, V. M. A.

A simplified stress–strain model for coated plain-weave fabrics used in Tensioned Fabric Structures

439-450

Giovanis, Dimitris G. / Papadopoulos, Vissarion

Spectral representation-based neural network assisted stochastic structural mechanics

382-394

Przybylski, Jacek

Static and dynamic analysis of a flextensional transducer with an axial piezoelectric actuation

140-151

Shirmohammadi, Fatemeh / Esmaeily, Asad / Kiaeipour, Zohreh

Stress–strain model for circular concrete columns confined by FRP and conventional lateral steel

395-405

Wang, Shen

Thermal analysis of cylindrical concrete shell at transition boundary between regions with different reinforcement configurations

279-286

Elsharawy, Mohamed / Galal, Khaled / Stathopoulos, Ted

Torsional and shear wind loads on flat-roofed buildings

313-324

Tekgoz, M. / Garbatov, Y. / Guedes Soares, C.

Ultimate strength assessment of welded stiffened plates

325-339

Londoño, Julián M. / Neild, Simon A. / Wagg, David J.

Using a damper amplification factor to increase energy dissipation in structures

162-171

Advertisement

Engineering Structures - February 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - February 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.