Engineering Structures - November 2018

Published:	November 2018

Articles in this Issue

Author(s)	Title	Page(s)
Kodur, Venkatesh / Solhmirzaei, Roya / Agrawal, Ankit / Aziz, Esam M. / Soroushian, Parviz	Analysis of flexural and shear resistance of ultra high performance fiber reinforced concrete beams without stirrups	873-884
Shayanfar, Javad / Bengar, Habib Akbarzadeh / Parvin, Azadeh	Analytical prediction of seismic behavior of RC joints and columns under varying axial load	792-813
Krahl, Pablo Augusto / Carrazedo, Ricardo / El Debs, Mounir Khalil	Analytical solutions for rollover instability of concrete beams on elastomeric bearing pads	154-164
Miyamoto, Kou / She, Jinhua / Sato, Daiki / Yasuo, Nobuaki	Automatic determination of LQR weighting matrices for active structural control	308-321
Zeng, J. J. / Lin, G. / Teng, J. G. / Li, L. J.	Behavior of large-scale FRP-confined rectangular RC columns under axial compression	629-645
Hung, Chung-Chan / Hu, Fuo-Yao / Yen, Cheng-Hao	Behavior of slender UHPC columns under eccentric loading	701-711
Albuquerque, Gabriela L. / Silva, Augusto B. / Rodrigues, João Paulo C. / Silva, Valdir P.	Behavior of thermally restrained RC beams in case of fire	407-417
Lu, Junkai / Wu, Bin / Mei, Yang	Buckling mechanism of steel core and global stability design method for fixed-end buckling-restrained braces	447-461
Feng, Changda / Chen, Xinzhong	Characterization of translating tornado-induced pressures and responses of a low-rise building frame based on measurement data	495-508
Granata, Michele Fabio / Longo, Giuseppe / Recupero, Antonino / Arici, Marcello	Construction sequence analysis of long-span cable-stayed bridges	267-281
Cahís, X. / Simon, E. / Piedrafita, D. / Catalán, A.	Core behavior and low-cycle fatigue estimation of the Perforated Core Buckling-Restrained Brace	126-138
Schneider, Sebastian / Marx, Steffen	Design of railway bridges for dynamic loads due to high-speed traffic	396-406
Branco, Jorge M. / Verbist, Maxime / Descamps, Thierry	Design of three Step Joint typologies: Review of European standardized approaches	573-585
Li, Guo / Ji, Tianjian / Chen, Jun	Determination of the dynamic load factors for crowd jumping using motion capture technique	1-9
Izadi, M. R. / Ghafoori, E. / Shahverdi, M. / Motavalli, M. / Maalek, S.	Development of an iron-based shape memory alloy (Fe-SMA) strengthening system for steel plates	433-446
Manca, Mirko / Karrech, Ali / Dight, Phil / Ciancio, Daniela	Dual cohesive elements for 3D modelling of synthetic fibre-reinforced concrete	851-860
Pereira, Sérgio / Magalhães, Filipe / Gomes, Jorge P. / Cunha, Álvaro / Lemos, José V.	Dynamic monitoring of a concrete arch dam during the first filling of the reservoir	548-560
Colangelo, Felice	Effect of axial force-bending moment interaction on stochastic nonzero mean seismic response of reinforced concrete frames	139-153
Kanchanadevi, A. / Ramanjaneyulu, K.	Effect of corrosion damage on seismic behaviour of existing reinforced concrete beam-column sub-assemblages	601-617
Arafa, Ahmed / Farghaly, Ahmed Sabry / Benmokrane, Brahim	Effect of web reinforcement on the seismic response of concrete squat walls reinforced with glass-FRP bars	712-723
Deniz, Derya / Song, Junho / Hajjar, Jerome F.	Energy-based sidesway collapse fragilities for ductile structural frames under earthquake loadings	282-294
Akin, J. E.	Enhanced moment and shear recovery for classic beams and frames	814-825
Virgin, Lawrence N.	Enhancing the teaching of elastic buckling using additive manufacturing	338-345
Sattar, Siamak	Evaluating the consistency between prescriptive and performance-based seismic design approaches for reinforced concrete moment frame buildings	919-931
Wang, Hao / Xu, Shanhua / Li, Anbang / Kang, Kewu	Experimental and numerical investigation on seismic performance of corroded welded steel connections	10-25
Kristoffersen, Martin / Pettersen, Jon Eide / Aune, Vegard / Børvik, Tore	Experimental and numerical studies on the structural response of normal strength concrete slabs subjected to blast loading	242-255
Gauron, Olivier / Saidou, Adamou / Busson, Arnaud / Siqueira, Gustavo Henrique / Paultre, Patrick	Experimental determination of the lateral stability and shear failure limit states of bridge rubber bearings	39-48
Mou, Ben / Pang, Liyi / Qiao, Qiyun / Yang, Yiting	Experimental investigation of unequal-depth-beam-to-column joints with t-shape connector	663-674
Arrayago, I. / Ferrer, M. / Marimon, F. / Real, E. / Mirambell, E.	Experimental investigation on ferritic stainless steel composite slabs	538-547
Al-Humeidawi, Basim H. / Mandal, Parthasarathi	Experimental investigation on the combined effect of dowel misalignment and cyclic wheel loading on dowel bar performance in JPCP	256-266
Keipour, N. / Valipour, H. R. / Bradford, M. A.	Experimental study of steel-timber composite (STC) beam to steel column joints having a flush end-plate	906-918
Cheng, Xin / Chen, Yiyi / Niu, Li / Nethercot, David A.	Experimental study on H-section steel beam-columns under cyclic biaxial bending considering the effect of local buckling	826-839
Fahmy, Mohamed F. M. / Farghal, Omar A. / Sharobeem, Girgis F. G.	Exploratory study of adopting longitudinal column reinforcement details as a design-controllable tool to seismic behavior of exterior RC beam-column joints	95-110
Abdy, Abduljabbar I. / Hashemi, M. Javad / Al-Mahaidi, Riadh	Fatigue life improvement of steel structures using self-prestressing CFRP/SMA hybrid composite patches	358-372
Castilho, Eloísa / Schclar, Noemí / Tiago, Carlos / Braga Farinha, M. Luísa	FEA model for the simulation of the hydration process and temperature evolution during the concreting of an arch dam	165-177
Jensen, Thomas Westergaard / Poulsen, Peter Noe / Cao Hoang, Linh	Finite element limit analysis of slabs including limitations on shear forces	896-905
Feng, De-Cheng / Wu, Gang / Lu, Yong	Finite element modelling approach for precast reinforced concrete beam-to-column connections under cyclic loading	49-66
Lahouar, Mohamed Amine / Pinoteau, Nicolas / Caron, Jean-François / Foret, Gilles / Rivillon, Philippe	Fire design of post-installed bonded rebars: Full-scale validation test on a 2.94 × 2 × 0.15 m 3 concrete slab subjected to ISO 834-1 fire	81-94
Saljoughian, Alireza / Mostofinejad, Davood	Grooving methods in square RC columns strengthened with longitudinal CFRP under cyclic axial compression	724-735
Vicencio, Felipe / Alexander, Nicholas A.	Higher mode seismic structure-soil-structure interaction between adjacent building during earthquakes	322-337
Páez, Pablo M. / Sensale, Beradi	Improved prediction of long-term prestress loss in unbonded prestressed concrete members	111-125
Purasinghe, Rupa / Dusicka, Peter / Garth, John S. / Dedek, Gennelle / Lum, Howard	In-plane cyclic behavior of structural insulated panel wood walls including slit steel connectors	178-197
Lim, Ellys / Chouw, Nawawi	Influence of simultaneous multi-axial ground excitation and a compliant base on the response of a non-structural component with multiple supports	618-628
Barros, Joaquim A. O. / Foster, Stephen J.	An integrated approach for predicting the shear capacity of fibre reinforced concrete beams	346-357
Pavlovic, A. / Fragassa, C.	Investigating the resistance of reinforced barriers to high velocity projectiles	384-395
Li, Yan-Wen / Li, Guo-Qiang / Jiang, Jian / Sun, Fei-Fei	Mitigating seismic response of RC moment resisting frames using steel energy-dissipative columns	586-600
Basili, Michela / De Angelis, Maurizio / Pietrosanti, Daniele	Modal analysis and dynamic response of two adjacent single-degree-of-freedom systems linked by spring-dashpot-inerter elements	736-752
Caterino, Nicola / Cosenza, Edoardo	A multi-criteria approach for selecting the seismic retrofit intervention for an existing structure accounting for expected losses and tax incentives in Italy	840-850
Phocas, Marios C. / Alexandrou, Kristis	Numerical analysis and cable activation in hybrid bending-active structures with multiple cables	561-572
Kim, Chang-Soo / Gong, Yu	Numerical investigation of creep and shrinkage effects on minimum reinforcement of concentrically and eccentrically loaded RC columns	509-525
Jawdhari, Akram / Fam, Amir	Numerical study on mechanical and adhesive splices for ribbed GFRP plates used in concrete beams	478-494
Hájková, Karolina / Šmilauer, Vít / Jendele, Libor / Červenka, Jan	Prediction of reinforcement corrosion due to chloride ingress and its effects on serviceability	768-777
Xiang, Yang / Luo, Yong-feng / Huang, Qing-Long / Zhu, Zhao-chen	Probabilistic inelastic seismic demand spectra for large-span planar steel structures subjected to vertical ground motions	646-662
Alogla, S. / Kodur, V. K. R.	Quantifying transient creep effects on fire response of reinforced concrete columns	885-895
Guo, Xiangfeng / Dias, Daniel / Carvajal, Claudio / Peyras, Laurent / Breul, Pierre	Reliability analysis of embankment dam sliding stability using the sparse polynomial chaos expansion	295-307
Ajamy, A. / Asgarian, B. / Ventura, C. E. / Zolfaghari, M. R.	Seismic fragility analysis of jacket type offshore platforms considering soil-pile-structure interaction	198-211
Tondini, N. / Zanon, G. / Pucinotti, R. / Di Filippo, R. / Bursi, O. S.	Seismic performance and fragility functions of a 3D steel-concrete composite structure made of high-strength steel	373-383
Kun, Chern / Yang, Ziqi / Chouw, Nawawi	Seismic performance of skewed bridges with simultaneous effects of pounding and supporting soil	26-38
Wen, Bai / Moustafa, Mohamed A. / Junwu, Dai	Seismic response of potential transformers and mitigation using innovative multiple tuned mass dampers	67-80
Zabihi, Alireza / Tsang, Hing-Ho / Gad, Emad F. / Wilson, John L.	Seismic retrofit of exterior RC beam-column joint using diagonal haunch	753-767
Reyes, Juan C. / Yamin, Luis E. / Hassan, Wael M. / Sandoval, Juan D. / Gonzalez, Cristian D. / Galvis, Francisco A.	Shear behavior of adobe and rammed earth walls of heritage structures	526-537
Ali, Ahmed H. / Mohamed, Hamdy M. / Chaallal, Omar / Benmokrane, Brahim / Ghrib, Faouzi	Shear resistance of RC circular members with FRP discrete hoops versus spirals	688-700
Wang, Zhi-Yu / Li, Xiaolei / Gai, Weiming / Jiang, Ruijuan / Wang, Qing-Yuan / Zhao, Qiuhong / Dong, Jucan / Zhang, Tao	Shear response of trapezoidal profiled webs in girders with concrete-filled RHS flanges	212-228
Sahraei, Arash / Pezeshky, Payam / Mohareb, Magdi / Doudak, Ghasan	Simplified expressions for elastic lateral torsional buckling of wooden beams	229-241
Chen, Xu / Guan, Zhongguo / Spencer, Billie F. / Li, Jianzhong	A simplified procedure for estimating nonlinear seismic demand of tall piers	778-791
Palacios-Munoz, B. / Gracia-Villa, L. / Zabalza-Bribián, I. / López-Mesa, B.	Simplified structural design and LCA of reinforced concrete beams strengthening techniques	418-432
Savran, Melih / Aydin, Levent	Stochastic optimization of graphite-flax/epoxy hybrid laminated composite for maximum fundamental frequency and minimum cost	675-687
Sun, Qilin / Yuan, Guanglin / Huang, Yuner / Shu, Qianjin / Li, Qingtao	Structural behavior of supported tubular bus structure in substations under seismic loading	861-872
Giaccu, Gian Felice / Caracoglia, Luca	Wind-load fragility analysis of monopole towers by Layered Stochastic-Approximation-Monte-Carlo method	462-477

About this
data sheet
IssueID
17521
Published on:
28/11/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - November 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - November 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.