Engineering Structures - January 2013

Published:	January 2013

Articles in this Issue

Author(s)	Title	Page(s)
Draï, Ahmed / Aour, Benaoumeur	Analysis of plastic deformation behavior of HDPE during high pressure torsion process	87-93
Zhang, Hua / Liu, Liang / Dong, Ming / Sun, Hao	Analysis of wind-induced vibration of fluid–structure interaction system for isolated aqueduct bridge	28-37
Oudah, Fadi / El-Hacha, Raafat	Analytical fatigue prediction model of RC beams strengthened in flexure using prestressed FRP reinforcement	173-183
Jiang, Hua / Kurama, Yahya C.	An analytical investigation on the seismic retrofit of older medium-rise reinforced concrete shear walls under lateral loads	459-470
Park, Hong-Gun / Kang, Soonpil / Choi, Kyoung-Kyu	Analytical model for shear strength of ordinary and prestressed concrete beams	94-103
Karimi, Kian / Tait, Michael J. / El-Dakhakhni, Wael W.	Analytical modeling and axial load design of a novel FRP-encased steel–concrete composite column for various slenderness ratios	526-534
Rana, Shohel / Islam, Nazrul / Ahsan, Raquib / Ghani, Sayeed Nurul	Application of evolutionary operation to the minimum cost design of continuous prestressed concrete bridge structure	38-48
Fiore, Alessandra / Foti, Dora / Monaco, Pietro / Raffaele, Domenico / Uva, Giuseppina	An approximate solution for the rheological behavior of non-homogeneous structures changing the structural system during the construction process	631-642
Ubertini, Filippo / Gentile, Carmelo / Materazzi, Annibale Luigi	Automated modal identification in operational conditions and its application to bridges	264-278
Elsawaf, S. / Wang, Y. C.	Behaviour of restrained structural subassemblies of steel beam to CFT column in fire during cooling stage	471-492
Sousa-Martins, J. / Kakogiannis, D. / Coghe, F. / Reymen, B. / Teixeira-Dias, F.	Behaviour of sandwich structures with cork compound cores subjected to blast waves	140-146
Punurai, Wonsiri / Hsu, Cheng-Tzu Thomas / Punurai, Sun / Chen, Jian	Biaxially loaded RC slender columns strengthened by CFRP composite fabrics	311-321
Seo, Junwon / Phares, Brent / Lu, Ping / Wipf, Terry / Dahlberg, Justin	Bridge rating protocol using ambient trucks through structural health monitoring system	569-580
Gao, X. Y. / Balendra, T. / Koh, C. G.	Buckling strength of slender circular tubular steel braces strengthened by CFRP	547-556
Ghallab, Ahmed	Calculating ultimate tendon stress in externally prestressed continuous concrete beams using simplified formulas	417-430
Roca, Pere / Cervera, Miguel / Pelà, Luca / Clemente, Roberto / Chiumenti, Michele	Continuum FE models for the analysis of Mallorca Cathedral	653-670
Bilotta, A. / Faella, C. / Martinelli, E. / Nigro, E.	Design by testing procedure for intermediate debonding in EBR FRP strengthened RC beams	147-154
Praveen Moragaspitiya, H. N. / Thambiratnam, David P. / Perera, Nimal J. / Chan, Tommy H. T.	Development of a vibration based method to update axial shortening of vertical load bearing elements in reinforced concrete buildings	49-61
Beben, Damian	Dynamic amplification factors of corrugated steel plate culverts	193-204
Habibi, Ali / Chan, Ricky W. K. / Albermani, Faris	Energy-based design method for seismic retrofitting with passive energy dissipation systems	77-86
Hoult, Neil A. / Take, W. Andy / Lee, Chris / Dutton, Michael	Experimental accuracy of two dimensional strain measurements using Digital Image Correlation	718-726
Perdomo, María Elena / Picón, Ricardo / Marante, María Eugenia / hild, François / Roux, Stephan / Flórez-López, Julio	Experimental analysis and mathematical modeling of fracture in RC elements with any aspect ratio	407-416
Sistaninia, M. / Hudert, M. / Humbert, L. / Weinand, Y.	Experimental and numerical study on structural behavior of a single timber Textile Module	557-568
Jankowska-Sandberg, Joanna / Kołodziej, Jarosław	Experimental study of steel truss lateral–torsional buckling	165-172
Saliba, N. / Gardner, L.	Experimental study of the shear response of lean duplex stainless steel plate girders	375-391
Lu, Lyan-Ywan / Hsu, Chia-Chiea	Experimental study of variable-frequency rocking bearings for near-fault seismic isolation	116-129
Chang, Shuenn-Yih	An explicit structure-dependent algorithm for pseudodynamic testing	511-525
Soty, R. / Shima, H.	Formulation for shear force–relative displacement relationship of L-shape shear connector in steel–concrete composite structures	581-592
Ferradi, Mohammed Khalil / Cespedes, Xavier / Arquier, Mathieu	A higher order beam finite element with warping eigenmodes	748-762
Tizani, Walid / Wang, Zhi Yu / Hajirasouliha, Iman	Hysteretic performance of a new blind bolted connection to concrete filled columns under cyclic loading: An experimental investigation	535-546
Contamine, R. / Si Larbi, A. / Hamelin, P.	Identifying the contributing mechanisms of textile reinforced concrete (TRC) in the case of shear repairing damaged and reinforced concrete beams	447-458
Hu, Bo	An improved criterion for sufficiently/insufficiently FRP-confined concrete derived from ultimate axial stress	431-446
Nwankwo, E. / Fallah, A. Soleiman / Langdon, G. S. / Louca, L. A.	Inelastic deformation and failure of partially strengthened profiled blast walls	671-686
Ghafoori, E.	Interfacial stresses in beams strengthened with bonded prestressed plates	508-510
Sha, Yanyan / Hao, Hong	Laboratory tests and numerical simulations of barge impact on circular reinforced concrete piers	593-605
Wang, Chun-Lin / Usami, Tsutomu / Funayama, Jyunki / Imase, Fumiaki	Low-cycle fatigue testing of extruded aluminium alloy buckling-restrained braces	294-301
Rizk, E. / Marzouk, H.	Minimum shear reinforcement for thick plates and two-way slabs	1-13
Nithyadharan, M. / Kalyanaraman, V.	Modelling hysteretic behaviour of cold-formed steel wall panels	643-652
Sengupta, Piyali / Li, Bing	Modified Bouc–Wen model for hysteresis behavior of RC beam–column joints with limited transverse reinforcement	392-406
Kaźmierczak, Magda / Jędrysiak, Jarosław	A new combined asymptotic-tolerance model of vibrations of thin transversally graded plates	322-331
Kamaris, George S. / Hatzigeorgiou, George D. / Beskos, Dimitri E.	A new damage index for plane steel frames exhibiting strength and stiffness degradation under seismic motion	727-736
Markovič, M. / Krauberger, N. / Saje, M. / Planinc, I. / Bratina, S.	Non-linear analysis of pre-tensioned concrete planar beams	279-293
Pecce, Marisa / Rossi, Fernando	The non-linear model of embedded steel–concrete composite column bases	247-263
Pi, Y.-L. / Bradford, M. A.	Nonlinear analysis and buckling of shallow arches with unequal rotational end restraints	615-630
Khorsandnia, Nima / Valipour, Hamid R. / Crews, Keith	Nonlinear finite element analysis of timber beams and joints using the layered approach and hypoelastic constitutive law	606-614
Salawdeh, Suhaib / Goggins, Jamie	Numerical simulation for steel brace members incorporating a fatigue model	332-349
Bi, Kaiming / Hao, Hong	Numerical simulation of pounding damage to bridge structures under spatially varying ground motions	62-76
Ferreira, Denise / Bairán, Jesús / Mari, Antonio	Numerical simulation of shear-strengthened RC beams	359-374
Farahi, Mojtaba / Mofid, Massood	On the quantification of seismic performance factors of Chevron Knee Bracings, in steel structures	155-164
Zaki, Manal K.	Optimal performance of FRP strengthened concrete columns under combined axial–flexural loading	14-27
Lárusson, Lárus H. / Fischer, Gregor / Jönsson, Jeppe	Prefabricated floor panels composed of fiber reinforced concrete and a steel substructure	104-115
Sharma, Akanshu / Reddy, G. R. / Vaze, K. K. / Eligehausen, R.	Pushover experiment and analysis of a full scale non-seismically detailed RC structure	218-233
Brites, Ricardo D. / Neves, Luís C. / Saporiti Machado, J. / Lourenço, Paulo B. / Sousa, Hélder S.	Reliability analysis of a timber truss system subjected to decay	184-192
Pastor, M. M. / Bonada, J. / Roure, F. / Casafont, M.	Residual stresses and initial imperfections in non-linear analysis	493-507
Rai, Durgesh C. / Annam, Praveen K. / Pradhan, Tripti	Seismic testing of steel braced frames with aluminum shear yielding dampers	737-747
Chacón, Rolando / Mirambell, Enrique / Real, Esther	Strength and ductility of concrete-filled tubular piers of integral bridges	234-246
Mascia, Nilson T. / Forti, Nádia C. S. / Soriano, Julio / Nicolas, Elias A. / Forti, Tiago L. D.	Study of concrete–timber composite beams using an analytical approach based on the principle of virtual work and experimental results	302-310
Bedynek, A. / Real, E. / Mirambell, E.	Tapered plate girders under shear: Tests and numerical research	350-358
Russo, Salvatore	Testing and modelling of dynamic out-of-plane behaviour of the historic masonry façade of Palazzo Ducale in Venice, Italy	130-139
Metelli, Giovanni	Theoretical and experimental study on the cyclic behaviour of X braced steel frames	763-773
Seguín, Carlos E. / Almazán, José L. / de la Llera, Juan C.	Torsional balance of seismically isolated asymmetric structures	703-717
Chou, Chung-Che / Chang, Hao-Jan / Hewes, Joshua T.	Two-plastic-hinge and two dimensional finite element models for post-tensioned precast concrete segmental bridge columns	205-217
López-Almansa, F. / Domínguez, D. / Benavent-Climent, A.	Vulnerability analysis of RC buildings with wide beams located in moderate seismicity regions	687-702

About this
data sheet
IssueID
17343
Published on:
01/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - January 2013

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - January 2013

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.