Engineering Structures - v. 29, n. 11 (November 2007)

Published:	November 2007

Articles in this Issue

Author(s)	Title	Page(s)
Milani, Gabriele / Lourenço, Paulo / Tralli, Antonio	3D homogenized limit analysis of masonry buildings under horizontal loads	3134-3148
Jiang, T. / Teng, J. G.	Analysis-oriented stress–strain models for FRP–confined concrete	2968-2986
Magliulo, Gennaro / Maddaloni, Giuseppe / Cosenza, Edoardo	Comparison between non-linear dynamic analysis performed according to EC8 and elastic and non-linear static analyses	2893-2900
Park, Ji-Hun / Moon, Byoung-Wook / Min, Kyung-Won / Lee, Sung-Kyung / Kim, Chee Kyeong	Cyclic loading test of friction-type reinforcing members upgrading wind-resistant performance of transmission towers	3185-3196
Bakhary, Norhisham / Hao, Hong / Deeks, Andrew J.	Damage detection using artificial neural network with consideration of uncertainties	2806-2815
Meng, X. / Dodson, A. H. / Roberts, G. W.	Detecting bridge dynamics with GPS and triaxial accelerometers	3178-3184
Zhang, Ning / Tan, Kang-Hai	Direct strut-and-tie model for single span and continuous deep beams	2987-3001
Agarwal, V. K. / Niedzwecki, J. M. / van de Lindt, J. W.	Earthquake induced pounding in friction varying base isolated buildings	2825-2832
Zanuy, Carlos / De La Fuente, Pablo / Albajar, Luis	Effect of fatigue degradation of the compression zone of concrete in reinforced concrete sections	2908-2920
Kwak, Hyo-Gyoung / Kim, Jin-Kook	effect of slender RC columns under seismic load	3121-3133
Kwan, A. K. H. / Ng, P. L.	Effects of traffic vibration on curing concrete stitch: Part I — test method and control program	2871-2880
Ng, P. L. / Kwan, A. K. H.	Effects of traffic vibration on curing concrete stitch: Part II—cracking, debonding and strength reduction	2881-2892
Brownjohn, J. M. W. / Pavic, A.	Experimental methods for estimating modal mass in footbridges using human-induced dynamic excitation	2833-2843
Chaudhary, M. Tariq Amin	FEM modelling of a large piled raft for settlement control in weak rock	2901-2907
Lee, Yong-Hak / Sung, Won-Jin / Lee, Tae-Hyung / Seong, Kee-Won	Finite element formulation of a composite double T-beam subjected to torsion	2935-2945
Tjhin, Tjen N. / Kuchma, Daniel A.	Integrated analysis and design tool for the strut-and-tie method	3042-3052
Cavicchi, Andrea / Gambarotta, Luigi	Lower bound limit analysis of masonry bridges including arch–fill interaction	3002-3014
Shannag, M. Jamal / Abu-Farsakh, Ghazi / Abu-Dyya, Nabeela	Modeling the cyclic response of fiber reinforced concrete joints	2960-2967
Imam, Boulent M. / Righiniotis, Timothy D. / Chryssanthopoulos, Marios K.	Numerical modelling of riveted railway bridge connections for fatigue evaluation	3071-3081
Cluni, Federico / Gusella, Vittorio / Ubertini, Filippo	A parametric investigation of wind-induced cable fatigue	3094-3105
Royer-Carfagni, Gianni / Silvestri, Mirko	A proposal for an arch footbridge in Venice made of structural glass masonry	3015-3025
Genshu, Tong / Yongfeng, Zhao	Seismic force modification factors for modified-Clough hysteretic model	3053-3070
Kim, Young-Suk / Yun, Chung-Bang	Seismic response characteristics of bridges using double concave friction pendulum bearings with tri-linear behavior	3082-3093
Lee, Han-Seon / Ko, Dong-Woo	Seismic response characteristics of high-rise RC wall buildings having different irregularities in lower stories	3149-3167
Abbas, Hassan H. / Sause, Richard / Driver, Robert G.	Simplified analysis of flange transverse bending of corrugated web I-girders under in-plane moment and shear	2816-2824
Delhomme, F. / Mommessin, M. / Mougin, J. P. / Perrotin, P.	Simulation of a block impacting a reinforced concrete slab with a finite element model and a mass-spring system	2844-2852
Cimellaro, Gian Paolo	Simultaneous stiffness–damping optimization of structures with respect to acceleration, displacement and base shear	2853-2870
Ranzi, Gianluca / Zona, Alessandro	A steel–concrete composite beam model with partial interaction including the shear deformability of the steel component	3026-3041
Seo, Choon-Gyo / Yun, Chung-Bang / Kim, Jae-Min	Three-dimensional frequency-dependent infinite elements for soil–structure interaction	3106-3120
Au, F. T. K. / Bai, Z. Z.	Two-dimensional nonlinear finite element analysis of monotonically and non-reversed cyclically loaded RC beams	2921-2934
Jiang, C. / Han, X. / Guan, F. J. / Li, Y. H.	An uncertain structural optimization method based on nonlinear interval number programming and interval analysis method	3168-3177
Tjhin, Tjen N. / Aschheim, Mark A. / Wallace, John W.	Yield displacement-based seismic design of RC wall buildings	2946-2959

About this
data sheet
IssueID
17328
Published on:
01/12/2018
Last updated on:
01/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - v. 29, n. 11 (November 2007)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - v. 29, n. 11 (November 2007)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.