Engineering Structures - April 2013

Published:	April 2013

Articles in this Issue

Author(s)	Title	Page(s)
Daoud, Atef / Maurel, Olivier / Laborderie, Christian	2D mesoscopic modelling of bar–concrete bond	696-706
Xu, Ming Cai / Guedes Soares, C.	Assessment of residual ultimate strength for wide dented stiffened panels subjected to compressive loads	316-328
Kimiaeifar, A. / Lund, E. / Thomsen, O. T. / Sørensen, J. D.	Asymptotic Sampling for reliability analysis of adhesive bonded stepped lap composite joints	655-663
Abdulridha, Alaa / Palermo, Dan / Foo, Simon / Vecchio, Frank J.	Behavior and modeling of superelastic shape memory alloy reinforced concrete beams	893-904
Archundia-Aranda, Hans I. / Tena-Colunga, Arturo / Grande-Vega, Alejandro	Behavior of reinforced concrete haunched beams subjected to cyclic shear loading	27-42
Souici, A. / Berthet, J. F. / Li, A. / Rahal, N.	Behaviour of both mechanically connected and bonded steel–concrete composite beams	11-23
Couto, Carlos / Real, Paulo Vila / Lopes, Nuno / Rodrigues, João Paulo	Buckling analysis of braced and unbraced steel frames exposed to fire	541-559
Yabuki, Tetsuya / Chambers, Janice J. / Arizumi, Yasunori / Shimozato, Tetsuhiro / Matsushita, Hiroaki	Buckling capacity of welded stainless steel flanges by finite element analysis	831-839
Torra, V. / Auguet, C. / Isalgue, A. / Carreras, G. / Terriault, P. / Lovey, F. C.	Built in dampers for stayed cables in bridges via SMA. The SMARTeR-ESF project: A mesoscopic and macroscopic experimental analysis with numerical simulations	43-57
Casolo, Siro / Milani, Gabriele / Uva, Giuseppina / Alessandri, Claudio	Comparative seismic vulnerability analysis on ten masonry towers in the coastal Po Valley in Italy	465-490
Carroll, S. P. / Owen, J. S. / Hussein, M. F. M.	A coupled biomechanical/discrete element crowd model of crowd–bridge dynamic interaction and application to the Clifton Suspension Bridge	58-75
Chen, Donna / El-Hacha, Raafat	Damage tolerance and residual strength of hybrid FRP–UHPC beam	275-283
Santoro, Maria Grazia / Kunnath, Sashi K.	Damage-based RC beam element for nonlinear structural analysis	733-742
Bolmsvik, Åsa / Brandt, Anders	Damping assessment of light wooden assembly with and without damping material	434-447
Lu, Wei / Ma, Zhongcheng / Mäkeläinen, Pentti / Outinen, Jyri	Design of shot nailed steel sheeting connection at ambient and elevated temperatures	963-972
Saad-Eldeen, S. / Garbatov, Y. / Guedes Soares, C.	Effect of corrosion severity on the ultimate strength of a steel box girder	560-571
Filipov, Evgueni T. / Fahnestock, Larry A. / Steelman, Joshua S. / Hajjar, Jerome F. / LaFave, James M. / Foutch, Douglas A.	Evaluation of quasi-isolated seismic bridge behavior using nonlinear bearing models	168-181
Vázquez-Herrero, Cristina / Martínez-Lage, Isabel / Aguilar, Gerardo / Martínez-Abella, Fernando	Evaluation of strand bond properties along the transfer length of prestressed lightweight concrete members	1048-1058
Pitrakkos, Theodoros / Tizani, Walid	Experimental behaviour of a novel anchored blind-bolt in tension	905-919
Razaqpur, A. Ghani / Shedid, Marwan / Nofal, Mostafa	Experimental investigation of load distribution in a composite girder bridge at elastic versus inelastic states	707-718
Gouverneur, Dirk / Caspeele, Robby / Taerwe, Luc	Experimental investigation of the load–displacement behaviour under catenary action in a restrained reinforced concrete slab strip	1007-1016
Mahendran, Mahen / Keerthan, Poologanathan	Experimental studies of the shear behavior and strength of LiteSteel beams with stiffened web openings	840-854
Li, Zhong-Xian / Lv, Yang / Xu, Long-He / Ding, Yang / Zhao, Qiuhong	Experimental studies on nonlinear seismic control of a steel–concrete hybrid structure using MR dampers	248-263
Cheng, Xin / Chen, Yiyi / Nethercot, David A.	Experimental study on H-shaped steel beam-columns with large width-thickness ratios under cyclic bending about weak-axis	264-274
Huang, Shan-Shan / Davison, Buick / Burgess, Ian W.	Experiments on reverse-channel connections at elevated temperatures	973-982
Shifferaw, Yared / Fanous, F. S.	Field testing and finite element analysis of steel bridge retrofits for distortion-induced fatigue	385-395
Ormarsson, Sigurdur / Dahlblom, Ola	Finite element modelling of moisture related and visco-elastic deformations in inhomogeneous timber beams	182-189
Tesser, Leopoldo / Scotta, Roberto	Flexural and shear capacity of composite steel truss and concrete beams with inferior precast concrete base	135-145
Campione, Giuseppe / Benfratello, Salvatore / Cucchiara, Calogero / Minafò, Giovanni	Flexural behaviour of glass panels under dead load and uniform lateral pressure	664-670
Carmona, J. R. / Porras, R. / Yu, R. C. / Ruiz, G.	A fracture mechanics model to describe the buckling behavior of lightly reinforced concrete columns	588-599
Ozbakkaloglu, Togay / Lim, Jian C. / Vincent, Thomas	FRP-confined concrete in circular sections: Review and assessment of stress–strain models	1068-1088
Zhao, Junxian / Wu, Bin / Ou, Jinping	Global stability design method of buckling-restrained braces considering end bending moment transfer: Discussion on pinned connections with collars	947-962
Ebead, Usama / Saeed, Huda	Hybrid shear strengthening system for reinforced concrete beams: An experimental study	421-433
Pérez Caldentey, Alejandro / Padilla Lavaselli, Patricio / Corres Peiretti, Hugo / Ariñez Fernández, Freddy	Influence of stirrup detailing on punching shear strength of flat slabs	855-865
Zhou, Xiangming / Li, Guoqiang	A macro-element based practical model for seismic analysis of steel–concrete composite high-rise buildings	91-103
Murín, J. / Aminbaghai, M. / Kutiš, V. / Hrabovsky, J.	Modal analysis of the FGM beams with effect of axial force under longitudinal variable elastic Winkler foundation	234-247
Yi, Jin-Hak / Park, Jin-Soon / Han, Sang-Hun / Lee, Kwang-Soo	Modal identification of a jacket-type offshore structure using dynamic tilt responses and investigation of tidal effects on modal properties	767-781
Nazir, Shahid / Dhanasekar, Manicka	Modelling the failure of thin layered mortar joints in masonry	615-627
Benavent-Climent, A. / Donaire-Ávila, J.	Moment transfer and influence of transverse beams in interior waffle flat plate–column connections under lateral loading	146-155
Hedayati Dezfuli, F. / Shahria Alam, M.	Multi-criteria optimization and seismic performance assessment of carbon FRP-based elastomeric isolator	525-540
Poirier, Jeffrey D. / Vel, Senthil S. / Caccese, Vincent	Multi-objective optimization of laser-welded steel sandwich panels for static loads using a genetic algorithm	508-524
Kato, Junji / Ramm, Ekkehard	Multiphase layout optimization for fiber reinforced composites considering a damage model	202-220
del Coz Díaz, J. J. / García Nieto, P. J. / Lozano Martínez-Luengas, A. / Suarez Domínguez, F. J. / Domínguez Hernández, J.	Non-linear numerical analysis of plywood board timber connections by DOE-FEM and full-scale experimental validation	76-90
Bai, Linjia / Zhang, Yunfeng	Nonlinear dynamic behavior of steel framed roof structure with self-centering members under extreme transient wind load	819-830
Kugler, St. / Fotiu, P. A. / Murín, J.	The numerical analysis of FGM shells with enhanced finite elements	920-935
Luccioni, Bibiana / Rougier, Viviana C.	Numerical analysis of fibre reinforced polymer retrofitted masonry panels	360-372
Azimi, Hossein / Galal, Khaled / Pekau, Oscar A.	A numerical element for vehicle–bridge interaction analysis of vehicles experiencing sudden deceleration	792-805
Salih, E. L. / Gardner, L. / Nethercot, D. A.	Numerical study of stainless steel gusset plate connections	448-464
Godinho, L. / Dias-Da-Costa, D. / Areias, P. / Júlio, E. / Soares, D.	Numerical study towards the use of a SH wave ultrasonic-based strategy for crack detection in concrete structures	782-791
Bocciarelli, Massimiliano / Colombi, Pierluigi	On the elasto-plastic behavior of continuous steel beams reinforced by bonded CFRP lamina	756-766
Hassan, M. M.	Optimization of stay cables in cable-stayed bridges using finite element, genetic algorithm, and B-spline combined technique	643-654
Motallebi Nasrabadi, Mohammad / Torabian, Shahabeddin / Mirghaderi, Seyed Rasoul	Panel zone modelling of Flanged Cruciform Columns: An analytical and numerical approach	491-507
Granata, Michele Fabio / Margiotta, Piercarlo / Arici, Marcello	A parametric study of curved incrementally launched bridges	373-384
Gidaris, Ioannis / Taflanidis, Alexandros A.	Parsimonious modeling of hysteretic structural response in earthquake engineering: Calibration/validation and implementation in probabilistic risk assessment	1017-1033
Visintin, P. / Oehlers, D. J. / Haskett, M.	Partial-interaction time dependent behaviour of reinforced concrete beams	408-420
Sarkar, Arunjyoti / Gudmestad, Ove T.	Pendulum type liquid column damper (PLCD) for controlling vibrations of a structure – Theoretical and experimental study	221-233
Kallias, A. N. / Rafiq, M. Imran	Performance assessment of corroding RC beams using response surface methodology	671-685
Martinelli, Luca / Martinelli, Paolo / Mulas, Maria Gabriella	Performance of fiber beam–column elements in the seismic analysis of a lightly reinforced shear wall	345-359
Bernardo, L. F. A. / Lopes, S. M. R.	Plastic analysis and twist capacity of high-strength concrete hollow beams under pure torsion	190-201
Block, F. M. / Davison, J. B. / Burgess, I. W. / Plank, R. J.	Principles of a component-based connection element for the analysis of steel frames in fire	1059-1067
Soliman, Mohamed / Frangopol, Dan M. / Kim, Sunyong	Probabilistic optimum inspection planning of steel bridges with multiple fatigue sensitive details	996-1006
Afefy, Hamdy Mohy El-Din / Mahmoud, Mohamed Hussein / Fawzy, Tarek Mohamed	Rehabilitation of defected RC stepped beams using CFRP	295-305
Verhaeghe, W. / Elishakoff, I.	Reliability based bridging of the gap between system's safety factors associated with different failure modes	606-614
Carroll, S. P. / Owen, J. S. / Hussein, M. F. M.	Reproduction of lateral ground reaction forces from visual marker data and analysis of balance response while walking on a laterally oscillating deck	1034-1047
Remennikov, Alex M. / Kong, Sih Ying / Uy, Brian	The response of axially restrained non-composite steel–concrete–steel sandwich panels due to large impact loading	806-818
Yu, Haitao / Yuan, Yong / Qiao, Zongzhao / Gu, Yun / Yang, Zhihao / Li, Xiudi	Seismic analysis of a long tunnel based on multi-scale method	572-587
Grande, Ernesto / Rasulo, Alessandro	Seismic assessment of concentric X-braced steel frames	983-995
Rahman Bhuiyan, A. / Shahria Alam, M.	Seismic performance assessment of highway bridges equipped with superelastic shape memory alloy-based laminated rubber isolation bearing	396-407
Chaulagain, H. / Rodrigues, H. / Jara, J. / Spacone, E. / Varum, H.	Seismic response of current RC buildings in Nepal: A comparative analysis of different design/construction	284-294
Wang, Jingfeng / Zhang, Lin / Spencer, B. F.	Seismic response of extended end plate joints to concrete-filled steel tubular columns	876-892
Barros, Helena / Ferreira, Carla / Figueiras, Joaquim	Serviceability design of reinforced concrete members – Closed form solution	600-605
Trahair, N. S.	Shear effect on cruciform post-buckling	24-26
Fang, C. / Izzuddin, B. A. / Elghazouli, A. Y. / Nethercot, D. A.	Simplified energy-based robustness assessment for steel-composite car parks under vehicle fire	719-732
Miguel, Pedro F. / Navarro-Gregori, Juan / Fernandez-Prada, Miguel A. / Bonet, José L.	A simplified method to predict the ultimate shear stress of reinforced concrete membrane elements	329-344
Chalioris, Constantin E.	Steel fibrous RC beams subjected to cyclic deformations under predominant shear	104-118
Abas, F. M. / Gilbert, R. I. / Foster, S. J. / Bradford, M. A.	Strength and serviceability of continuous composite slabs with deep trapezoidal steel decking and steel fibre reinforced concrete	866-875
Altin, Sinan / Kopraman, Yağmur / Baran, Mehmet	Strengthening of RC walls using externally bonding of steel strips	686-695
Teng, J. G. / Hu, Y. M. / Yu, T.	Stress–strain model for concrete in FRP-confined steel tubular columns	156-167
Sorace, Stefano / Terenzi, Gloria	Structural assessment of a modern heritage building	743-755
Carbonari, Sandro / Gara, Fabrizio / Roia, Davide / Leoni, Graziano / Dezi, Luigino	Tests on two 18-years-old prestressed thin walled roof elements	936-946
Carta, G. / Stochino, F.	Theoretical models to predict the flexural failure of reinforced concrete beams under blast loads	306-315
Takewaki, Izuru / Fujita, Kohei / Yoshitomi, Shinta	Uncertainties in long-period ground motion and its impact on building structural design: Case study of the 2011 Tohoku (Japan) earthquake	119-134
Yu, Min / Zha, Xiaoxiong / Ye, Jianqiao / Li, Yuting	A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression	1-10
van der Meer, L. J. / Martens, D. R. W. / Vermeltfoort, A. T.	UPT rectangular and flanged shear walls of high-strength CASIEL-TLM masonry: Experimental and numerical push-over analysis	628-642

About this
data sheet
IssueID
17327
Published on:
06/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - April 2013

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - April 2013

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.