Energy and Buildings - December 2014

Published:	December 2014

Articles in this Issue

Author(s)	Title	Page(s)
Jung, Haeyong / Yeo, Inseok / Song, Tae-Ho	Al-foil-bonded enveloping and double enveloping for application to vacuum insulation panels	595-606
Han, Gang / You, Shijun / Ye, Tianzhen / Sun, Peng / Zhang, Huan	Analysis of combined cooling, heating, and power systems under a compromised electric–thermal load strategy	586-594
Cetin, K. S. / Tabares-Velasco, P. C. / Novoselac, A.	Appliance daily energy use in new residential buildings: Use profiles and variation in time-of-use	716-726
Komurlu, Ruveyda / Arditi, David / Gurgun, Asli Pelin	Applicability of LEED's energy and atmosphere category in three developing countries	690-697
Krstić, Hrvoje / Koški, Željko / Otković, Irena Ištoka / Španić, Martina	Application of neural networks in predicting airtightness of residential units	160-168
Ceylan, Ilhan / Gedik, Engin / Erkaymaz, Okan / Gürel, Ali Etem	The artificial neural network model to estimate the photovoltaic modul efficiency for all regions of the Turkey	258-267
Kuhn, Tilmann E.	Calorimetric determination of the solar heat gain coefficient g with steady-state laboratory measurements	388-402
Chen, Yuxiang / Athienitis, Andreas K. / Galal, Khaled E.	A charging control strategy for active building-integrated thermal energy storage systems using frequency domain modeling	651-661
Gruber, Mattias / Trüschel, Anders / Dalenbäck, Jan-Olof	CO 2 sensors for occupancy estimations: Potential in building automation applications	548-556
Hu, Pingfang / Zha, Jing / Lei, Fei / Zhu, Na / Wu, Tianhua	A composite cylindrical model and its application in analysis of thermal response and performance for energy pile	324-332
Liu, Linn / Moshfegh, Bahram / Akander, Jan / Cehlin, Mathias	Comprehensive investigation on energy retrofits in eleven multi-family buildings in Sweden	704-715
Aïssani, A. / Chateauneuf, A. / Fontaine, J.-P. / Audebert, Ph.	Cost model for optimum thicknesses of insulated walls considering indirect impacts and uncertainties	21-32
Bonakdar, Farshid / Dodoo, Ambrose / Gustavsson, Leif	Cost-optimum analysis of building fabric renovation in a Swedish multi-story residential building	662-673
Chen, Yuxiang / Galal, Khaled E. / Athienitis, Andreas K.	Design and operation methodology for active building-integrated thermal energy storage systems	575-585
Paolini, Riccardo / Zinzi, Michele / Poli, Tiziana / Carnielo, Emiliano / Mainini, Andrea Giovanni	Effect of ageing on solar spectral reflectance of roofing membranes: Natural exposure in Roma and Milano and the impact on the energy needs of commercial buildings	333-343
Zhang, Qing / Zhang, Yanjun / Gao, Ping / Yu, Ziwang	Effect of natural cold source on groundwater source heat pump according to laboratory and field geotechnical thermal physical tests	557-566
Axaopoulos, Petros / Panagakis, Panos / Axaopoulos, Ioannis	Effect of wall orientation on the optimum insulation thickness of a growing-finishing piggery building	403-411
Gulbinas, Rimas / Taylor, John E.	Effects of real-time eco-feedback and organizational network dynamics on energy efficient behavior in commercial buildings	493-500
Ayoub, Nasser / Musharavati, Farayi / Pokharel, Shaligram / Gabbar, Hossam A.	Energy consumption and conservation practices in Qatar—A case study of a hotel building	55-69
Zeghici, Răzvan Mihai / Damian, Andrei / Frunzulică, Rodica / Iordache, Florin	Energy performance assessment of a complex district heating system which uses gas-driven combined heat and power, heat pumps and high temperature aquifer thermal energy storage	142-151
Gunner, Amalie / Hultmark, Göran / Vorre, Anders / Afshari, Alireza / Bergsøe, Niels Christian	Energy-saving potential of a novel ventilation system with decentralised fans in an office building	360-366
Lu, Shilei / Liu, Shangbao / Huang, Jingyu / Kong, Xiangfei	Establishment and experimental verification of PCM room's TRNSYS heat transfer model based on latent heat utilization ratio	287-298
Han, Aijun / Ye, Mingquan / Liu, Lili / Feng, Wei / Zhao, Minchun	Estimating thermal performance of cool coatings colored with high near-infrared reflective inorganic pigments: Iron doped La 2 Mo 2 O 7 compounds	698-703
Kim, Moon Keun / Leibundgut, Hansjürg	Evaluation of the humidity performance of a novel radiant cooling system connected with an Airbox convector as a low exergy system adapted to hot and humid climates	224-232
Lin, Shih-Hsin / Gerber, David Jason	Evolutionary energy performance feedback for design: Multidisciplinary design optimization and performance boundaries for design decision support	426-441
De Antonellis, Stefano / Intini, Manuel / Joppolo, Cesare Maria / Pedranzini, Federico	Experimental analysis and practical effectiveness correlations of enthalpy wheels	316-323
Krishnavel, V. / Karthick, A. / Murugavel, K. Kalidasa	Experimental analysis of concrete absorber solar water heating systems	501-505
Feng, Jingjuan (Dove) / Bauman, Fred / Schiavon, Stefano	Experimental comparison of zone cooling load between radiant and air systems	152-159
Nie, Jinzhe / Fang, Lei / Olesen, Bjarne Wilkens	Experimental evaluation on energy performance of innovative clean air heat pump for indoor environment control in summer and winter seasons	641-650
Cruz-Salas, M. V. / Castillo, J. A. / Huelsz, G.	Experimental study on natural ventilation of a room with a windward window and different windexchangers	458-465
Najim, Khalid B.	External load-bearing walls configuration of residential buildings in Iraq and their thermal performance and dynamic thermal behaviour	169-181
Haurie, Laia / Mazo, Javier / Delgado, Monica / Zalba, Belén	Fire behaviour of a mortar with different mass fractions of phase change material for use in radiant floor systems	86-93
Le, Khang / Bourdais, Romain / Guéguen, Hervé	From hybrid model predictive control to logical control for shading system: A support vector machine approach	352-359
Bouvenot, J.-B. / Andlauer, B. / Stabat, P. / Marchio, D. / Flament, B. / Latour, B. / Siroux, M.	Gas Stirling engine μCHP boiler experimental data driven model for building energy simulation	117-131
Berkenkamp, Felix / Gwerder, Markus	Hybrid model predictive control of stratified thermal storages in buildings	233-240
Lelievre, D. / Colinart, T. / Glouannec, P.	Hygrothermal behavior of bio-based building materials including hysteresis effects: Experimental and numerical analyses	617-627
Ibrahim, Mohamad / Wurtz, Etienne / Biwole, Pascal Henry / Achard, Patrick / Sallée, Hébert	Hygrothermal performance of exterior walls covered with aerogel-based insulating rendering	241-251
Ahmad, Aftab / Maslehuddin, Mohammed / Al-Hadhrami, Luai M.	In situ measurement of thermal transmittance and thermal resistance of hollow reinforced precast concrete walls	132-141
Yun, Gyeong / Yoon, Kap Chun / Kim, Kang Soo	The influence of shading control strategies on the visual comfort and energy demand of office buildings	70-85
Gao, Z. H. / Ji, J. / Fan, C. G. / Sun, J. H. / Zhu, J. P.	Influence of sidewall restriction on the maximum ceiling gas temperature of buoyancy-driven thermal flow	13-20
Thongtha, Atthakorn / Maneewan, Somchai / Punlek, Chantana / Ungkoon, Yothin	Investigation of the compressive strength, time lags and decrement factors of AAC-lightweight concrete containing sugar sediment waste	516-525
Lamnatou, Chr. / Notton, G. / Chemisana, D. / Cristofari, C.	Life cycle analysis of a building-integrated solar thermal collector, based on embodied energy and embodied carbon methodologies	378-387
Islam, Hamidul / Jollands, Margaret / Setunge, Sujeeva / Ahmed, Iftekhar / Haque, Nawshad	Life cycle assessment and life cycle cost implications of wall assemblages designs	33-45
Ekpenyong, Uduakobong E. / Zhang, Jiangfeng / Xia, Xiaohua	Mathematical modelling for the social impact to energy efficiency savings	344-351
Calautit, John Kaiser / Hughes, Ben Richard	Measurement and prediction of the indoor airflow in a room ventilated with a commercial wind tower	367-377
Qin, Jie / Song, Jianrong / Qu, Jian / Xue, Xiao / Zhang, Weidong / Song, Zhongnan / Shi, Yunxing / Jiang, Lihong / Li, Jingfang / Zhang, Tao	The methods for creating building energy efficient cool black coatings	308-315
Marzouk, Mohamed / Abdelaty, Ahmed	Monitoring thermal comfort in subways using building information modeling	252-257
Baglivo, Cristina / Congedo, Paolo Maria / Fazio, Andrea / Laforgia, Domenico	Multi-objective optimization analysis for high efficiency external walls of zero energy buildings (ZEB) in the Mediterranean climate	483-492
Jetcheva, Jorjeta G. / Majidpour, Mostafa / Chen, Wei-Peng	Neural network model ensembles for building-level electricity load forecasts	214-223
Gao, Xuefeng / Malkawi, Ali	A new methodology for building energy performance benchmarking: An approach based on intelligent clustering algorithm	607-616
Menegon, Diego / Vittoriosi, Alice / Fedrizzi, Roberto	A new test procedure for the dynamic laboratory characterization of thermal systems and their components	182-192
Zhang, Zhigang / Sun, Zhijian / Duan, Caixia	A new type of passive solar energy utilization technology—The wall implanted with heat pipes	111-116
Huang, Kailiang / Feng, Guohui / Li, Huixing / Yu, Shui	Opening window issue of residential buildings in winter in north China: A case study in Shenyang	567-574
Nasrabadi, Mehdi / Finn, Donal P.	Performance analysis of a low approach low temperature direct cooling tower for high-temperature building cooling systems	674-689
Gupta, Rajat / Irving, Robert	Possible effects of future domestic heat pump installations on the UK energy supply	94-110
Ouyang, Xiaoling / Lin, Boqiang	A projection of future electricity intensity and conservation potential in the Chinese building materials industry	268-276
Lee, M. C.	Reducing CO 2 emissions in the individual hot water circulation piping system	475-482
Bassamzadeh, Nastaran / Ghanem, Roger / Lu, Shuai / Kazemitabar, Seyed Jalal	Robust scheduling of smart appliances with uncertain electricity prices in a heterogeneous population	537-547
Casey, Sean P. / Elvins, Jon / Riffat, Saffa / Robinson, Andrew	Salt impregnated desiccant matrices for ‘open’ thermochemical energy storage—Selection, synthesis and characterisation of candidate materials	412-425
Ait-Taleb, T. / Abdelbaki, A. / Zrikem, Z.	Simulation of coupled heat transfers in a hollow tile with two vertical and three horizontal uniform rectangular cavities heated from below or above	628-632
Ferrara, Maria / Fabrizio, Enrico / Virgone, Joseph / Filippi, Marco	A simulation-based optimization method for cost-optimal analysis of nearly Zero Energy Buildings	442-457
Lundholm, Jeremy T. / Weddle, Brett M. / MacIvor, J. Scott	Snow depth and vegetation type affect green roof thermal performance in winter	299-307
Li, Zhengwei / Huang, Gongsheng / Sun, Yongjun	Stochastic chiller sequencing control	203-213
Naji, Sareh / Çelik, Oğuz Cem / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Shamshirband, Shahaboddin	Structure, energy and cost efficiency evaluation of three different lightweight construction systems used in low-rise residential buildings	727-739
Brito Filho, J. P. / Santos, T. V. Oliveira	Thermal analysis of roofs with thermal insulation layer and reflective coatings in subtropical and equatorial climate regions in Brazil	466-474
Kheradmand, Mohammad / Azenha, Miguel / de Aguiar, José L. B. / Krakowiak, Konrad J.	Thermal behavior of cement based plastering mortar containing hybrid microencapsulated phase change materials	526-536
Wang, Pengsu / Yang, Ming / Yang, Xudong / Shan, Ming	Thermal performance of a traditional Chinese heated wall with the in-series flow pass: Experiment and modeling	46-54
Vakiloroaya, Vahid / Samali, Bijan / Cuthbert, Stephen / Pishghadam, Kambiz / Eager, David	Thermo-economic optimization of condenser coil configuration for HVAC performance enhancement	1-12
Orehounig, Kristina / Mavromatidis, Georgios / Evins, Ralph / Dorer, Viktor / Carmeliet, Jan	Towards an energy sustainable community: An energy system analysis for a village in Switzerland	277-286
Kim, Eui-Jong / Plessis, Gilles / Hubert, Jean-Luc / Roux, Jean-Jacques	Urban energy simulation: Simplification and reduction of building envelope models	193-202
Ruschenburg, Jörn / Ćutić, Tomislav / Herkel, Sebastian	Validation of a black-box heat pump simulation model by means of field test results from five installations	506-515
Bourrelle, Julien S.	Zero energy buildings and the rebound effect: A solution to the paradox of energy efficiency?	633-640

About this
data sheet
IssueID
38593
Published on:
27/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Energy and Buildings - December 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Energy and Buildings - December 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.