Earthquake Engineering and Structural Dynamics - v. 47, n. 2 (February 2018)

Published:	February 2018

Author(s)	Title	Page(s)
Guzman Pujols, Jean C. / Ryan, Keri L.	Computational simulation of slab vibration and horizontal-vertical coupling in a full-scale test bed subjected to 3D shaking at E-Defense	438-459
Do, Thanh. N. / Filippou, Filip. C.	damage model for structures with degrading response	311-332
Hao, Linfei / Zhang, Ruifu / Jin, Kiwoong	Direct design method based on seismic capacity redundancy for structures with metal yielding dampers	515-534
Belleri, Andrea / Cornali, Fabrizio / Passoni, Chiara / Marini, Alessandra / Riva, Paolo	Evaluation of out-of-plane seismic performance of column-to-column precast concrete cladding panels in one-storey industrial buildings	397-417
Tsitos, Antonios / Bravo-Haro, Miguel A. / Elghazouli, Ahmed Y.	Influence of deterioration modelling on the seismic response of steel moment frames designed to Eurocode 8	356-376
Burton, Henry V. / Deierlein, Gregory G.	Integrating visual damage simulation, virtual inspection, and collapse capacity to evaluate post-earthquake structural safety of buildings	294-310
Bachmann, J. A. / Strand, M. / Vassiliou, M. F. / Broccardo, M. / Stojadinović, B.	Is rocking motion predictable?	535-552
Ther, Tamás / Kollár, László P.	Model for multiblock columns subjected to base excitation	418-437
Chuang, Ming-Chieh / Hsieh, Shang-Hsien / Tsai, Keh-Chyuan / Li, Chao-Hsien / Wang, Kung-Juin / Wu, An-Chien	Parameter identification for on-line model updating in hybrid simulations using a gradient-based method	269-293
Guo, Jack Wen Wei / Christopoulos, Constantin	probabilistic framework for estimating the residual drift of idealized SDOF systems of non-degrading conventional and damped structures	479-496
Li, Yong / Conte, Joel P.	Probabilistic performance-based optimum design of seismic isolation for a California high-speed rail prototype bridge	497-514
Alfarah, Bashar / Murcia-Delso, Juan / López-Almansa, Francisco / Oller, Sergio	RC structures cyclic behavior simulation with a model integrating plasticity, damage, and bond-slip	460-478
Mottier, Paul / Tremblay, Robert / Rogers, Colin	Seismic retrofit of low-rise steel buildings in Canada using rocking steel braced frames	333-355
Dhulipala, Somayajulu L. N. / Rodriguez-Marek, Adrian / Ranganathan, Shyam / Flint, Madeleine M.	site-consistent method to quantify sufficiency of alternative IMs in relation to PSDA	377-396

Author(s)

Title

Page(s)

Guzman Pujols, Jean C. / Ryan, Keri L.

Computational simulation of slab vibration and horizontal-vertical coupling in a full-scale test bed subjected to 3D shaking at E-Defense

438-459

Do, Thanh. N. / Filippou, Filip. C.

damage model for structures with degrading response

311-332

Hao, Linfei / Zhang, Ruifu / Jin, Kiwoong

Direct design method based on seismic capacity redundancy for structures with metal yielding dampers

515-534

Belleri, Andrea / Cornali, Fabrizio / Passoni, Chiara / Marini, Alessandra / Riva, Paolo

Evaluation of out-of-plane seismic performance of column-to-column precast concrete cladding panels in one-storey industrial buildings

397-417

Tsitos, Antonios / Bravo-Haro, Miguel A. / Elghazouli, Ahmed Y.

Influence of deterioration modelling on the seismic response of steel moment frames designed to Eurocode 8

356-376

Burton, Henry V. / Deierlein, Gregory G.

Integrating visual damage simulation, virtual inspection, and collapse capacity to evaluate post-earthquake structural safety of buildings

294-310

Bachmann, J. A. / Strand, M. / Vassiliou, M. F. / Broccardo, M. / Stojadinović, B.

Is rocking motion predictable?

535-552

Ther, Tamás / Kollár, László P.

Model for multiblock columns subjected to base excitation

418-437

Chuang, Ming-Chieh / Hsieh, Shang-Hsien / Tsai, Keh-Chyuan / Li, Chao-Hsien / Wang, Kung-Juin / Wu, An-Chien

Parameter identification for on-line model updating in hybrid simulations using a gradient-based method

269-293

Guo, Jack Wen Wei / Christopoulos, Constantin

probabilistic framework for estimating the residual drift of idealized SDOF systems of non-degrading conventional and damped structures

479-496

Li, Yong / Conte, Joel P.

Probabilistic performance-based optimum design of seismic isolation for a California high-speed rail prototype bridge

497-514

Alfarah, Bashar / Murcia-Delso, Juan / López-Almansa, Francisco / Oller, Sergio

RC structures cyclic behavior simulation with a model integrating plasticity, damage, and bond-slip

460-478

Mottier, Paul / Tremblay, Robert / Rogers, Colin

Seismic retrofit of low-rise steel buildings in Canada using rocking steel braced frames

333-355

Dhulipala, Somayajulu L. N. / Rodriguez-Marek, Adrian / Ranganathan, Shyam / Flint, Madeleine M.

site-consistent method to quantify sufficiency of alternative IMs in relation to PSDA

377-396

Advertisement

Earthquake Engineering and Structural Dynamics - v. 47, n. 2 (February 2018)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Earthquake Engineering and Structural Dynamics - v. 47, n. 2 (February 2018)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.