Construction and Building Materials - February 2024

Published:	February 2024

Articles in this Issue

Author(s)	Title	Page(s)
Tomei, Valentina / Grande, Ernesto / Caponero, Michele Arturo / Imbimbo, Maura	3D-printing for the rehabilitation and health monitoring of structures with FBG: Experimental tests	135067
Larfi, Saber / Tatar, Jovan	Adhesion of polymer and cementitious overlays to ultra high performance concrete substrate	135051
Yücel, Ayhan Öner	Aggregate packing and interlock evaluation utilizing 2-dimensional synthetic asphalt concrete sections	135222
Altayeb, Mohamedelmujtaba / Wang, Xin / Mahmoud, Maha R. I. / Ali, Yahia M. S. / Al-Shami, Haithm A. M. / Jiang, Kaidi	AI Agents for UHPC experimental design: High strength and low cost with fewer experimental trials	135206
Pang, Zhiming / Lu, Cong / Zhang, Yuehao	Analyzing water permeation in Engineered Cementitious Composites through inner crack morphology: An X-ray computed tomography based study	135093
Ribeiro, Rodrigo Scoczynski / Henneberg, Fernanda / Catai, Rodrigo / Arnela, Marc / Avelar, Márcio / Amarilla, Rosemara Santos Deniz / Wille, Valéria	Assessing impact sound insulation in floating floors assembled from Construction and Demolition Waste	135196
Xiao, Gang / Tan, Wei / Han, Shiwen / Mai, Peirong / Fan, Chao / Ou, Jinping	Axial compression behavior of seawater sea-sand concrete columns reinforced with SFCBs and closed-type winding GFRP ties	135147
Wang, Jizhong / Xiao, Hongqing / Lu, Longtao / Yang, Junlong / Lu, Shiwei / Shayanfar, Javad	Axial stress-strain model for concrete in partially FRP wrapped reinforced concrete columns	135028
Wang, Zhen / Li, Huajian / Huang, Fali / Yang, Zhiqiang / Wen, Jiaxin / Yi, Zhonglai	Bond properties between railway high-strength manufactured sand concrete and steel bars	135179
Panda, Swetapadma / Alnounou, Mohammed A. / Jawhara, Belal / Sarkar, Pradip	Bond strength and corrosion behavior of rebar embedded in copper slag concrete composites	135134
Yang, Yinjie / Huang, Le / Xu, Lihua / Gao, Huan / Yu, Min / Chi, Yin	A bottom-up analysis of the seismic performance of prefabricated recycled concrete shear wall via concurrent macro-mesoscale numerical approach	135037
Deng, Xiufeng / Tan, Hongbo / Yang, Zhuowen / He, Xingyang / Wang, Jintang / Jian, Shouwei / Huang, Jian / Yang, Jin	C-S-H based nucleation seed prepared from waste glass powder and carbide slag and its application in Portland cement	135258
Poussardin, Victor / Wilson, William / Paris, Michael / Tagnit-Hamou, Arezki / Deneele, Dimitri	Calcined clays as supplementary cementitious materials: A comparison between palygorskite and kaolinite	135180
Zhang, Runxiao / Scott, Allan N. / Panesar, Daman K.	Carbonation and CO2 reabsorption of cement-based materials: Influence of limestone filler and ground-granulated blast-furnace slag	135166
Wi, Kwangwoo / Şahin, Oğuzhan / Wang, Kejin / Lee, Yunsu	Characterization and evaluation of cement-based systems containing solution-treated municipal solid-waste incineration fly ash	135230
Ma, Pengfei / Liao, Wenyu / Zhuo, Ying / Ma, Hongyan / Zhu, Yanping / Chen, Genda	Characterization of alkali-silica reaction (ASR) products and C-S-H using SWIR spectroscopy for nondestructive detection of ASR	135207
Wang, Juntao / Cao, Shunqin / Luo, Xue / Zhang, Yuqing	Characterizing bitumen-aggregate interfacial failures under coupled size effects of bitumen film thickness and aggregate surface roughness	135238
Luan, Chenchen / Zhou, Ao / Li, Ye / Zou, Dujian / Gao, Pan / Liu, Tiejun	CO2 avoidance cost of fly ash geopolymer concrete	135193
Lin, Yuexiang / Lai, Zhengshou / Ma, Jianjun / Huang, Linchong	A combined weighted Voronoi tessellation and random field approach for modeling heterogeneous rocks with correlated grain structure	135228
Zhang, Dong / Jiang, Jianwei / Zhang, Zhiwen / Fang, Lei / Weng, Yiwei / Chen, Longhui / Wang, Dehui	Comparative analysis of sulfate resistance between seawater sea sand concrete and freshwater desalted sea sand concrete under different exposure environments	135146
Alneasan, Mahmoud / Alzo'ubi, Abdel Kareem / Ibrahim, Farid	A comparison between conventional and generalized fracture criteria to predict fracture parameters in clay rich rocks (Mudstone) under temperature effect	135168
Aslanbay, Yuksel Gul / Aslanbay, Huseyin Hilmi / Özbayrak, Ahmet / Kucukgoncu, Hurmet / Atas, Oguzhan	Comprehensive analysis of experimental and numerical results of bond strength and mechanical properties of fly ash based GPC and OPC concrete	135175
Kucharczyková, Barbara / Nápravník, Petr / Kocáb, Dalibor / Lisztwan, Dominik / Rovnaník, Pavel / Hajzler, Jan / Bílek, Vlastimil	Comprehensive study of moist curing duration and activator type on mechanical properties, shrinkage, and cracking of alkali-activated slag	135199
He, Xiang / Yang, Junfen / Niu, Mengdie / Hanif, Asad / Li, Guoxin	Contribution of layered double hydroxides to hydration and chloride binding capacity of OPC-SAC-GGBS repair materials	135203
Liu, Yalin / Wang, Linbing / Wei, Ya / Sun, Changliang / Xu, Yi	Current research status of UHPC creep properties and the corresponding applications – A review	135120
Xiao, Songqiang / Xiao, Juchong / Ren, Qingyang / Cheng, Yugang / Li, Wentao / Zhang, Wenfeng / Meng, Xin / Qin, Haoxin	Damage evolution and fracture characteristics of heterogeneous concrete with coarse aggregate impacted by high-velocity water jet	135128
Zou, Shuai / Kong Chau, Chung / Leung, Lai Ming / Duan, Zhenhua / Xiao, Jianzhuang / Lung Sham, Man / Poon, Chi Sun	Developing low-carbon high-strength core-shell aggregates using solid waste by cold-bonding techniques	135116
Zhang, Hongliang / Zhu, Kongfa / Liu, Feilong / Kang, Haonan	Development and performance of a novel hybrid toughened unsaturated polyester resin (UPR) composite for crack repair of asphalt pavement	135274
Yooprasertchai, Ekkachai / Saingam, Panumas / Hussain, Qudeer / Khan, Kaffayatullah / Ejaz, Ali / Suparp, Suniti	Development of stress-strain models for glass fiber reinforced polymer composites confined sustainable concrete made with natural and recycled aggregates	135097
Awuah, Frank K. A. / Garcia-Hernandez, Alvaro / Valentin, Jan	A digital design method for asphalt mixtures that incorporates aggregate geometry	135281
Xu, Rongsheng / Kong, Fanhui / Yang, Renhe / Wang, Haoran / Hong, Tong	Drying shrinkage mitigation of alkali-activated blast furnace slag-copper slag by polyether-based shrinkage reducing admixture and MgO-based expansion agent	135172
Kim, Seonhyeok / Seo, Joonho / Park, Solmoi / Lee, H. K.	Effect of accelerated carbonation curing on thermal evolution of hydrates in calcium sulfoaluminate cement	135201
Hu, Xiaoxia / Tao, Rui / Xin, Yujie / Du, Jiaheng / Wang, Meng / Hou, Dongshuai / Wang, Pan	The effect of aluminum-silicon glass phase in fly ash on the microstructure and properties of magnesium phosphate cement	135159
Salimi, Mahdi / Payan, Meghdad / Hosseinpour, Iman / Arabani, Mahyar / Ranjbar, Payam Zanganeh	Effect of glass fiber (GF) on the mechanical properties and freeze-thaw (F-T) durability of lime-nanoclay (NC)-stabilized marl clayey soil	135227
Li, Shanwu / Liu, Quantao / Wang, Huan / Wang, Jiazhu / He, Liang / Wu, Shaopeng	Effect of kaolin and sepiolite on fume emissions of rubber modified asphalt	135276
Souidi, Asma / Maaloufa, Youssef / Amazal, Mina / Atigui, Malika / Oubeddou, Slimane / Mounir, Soumia / Idoum, Aicha / Aharoune, Ahmed	The effect of mussel shell powder on the thermal and mechanical properties of plaster	135142
Sisman, Mehmet / Teomete, Egemen / Yanik, Jale / Malayoglu, Ugur	The effect of nano-biochar produced from various raw materials on flow and mechanical properties of mortar	135040
Ying, Jingwei / Deng, Changyu / Qian, Shaotong / Chen, Baixi	Effect of water-to-binder ratio on chloride ion diffusion in concrete under continuous biaxial compression	135308
Castro, Viviana Jacqueline / León, Francisco Javier / Martínez, Sonia / de Diego, Ana / Echevarría, Luis	Effectiveness of CFRP jackets in RC rectangular columns. Full-scale experimental study	134840
Yang, Lin / Pang, Yuyang / Tang, Qun / Chen, Xiaohui / Gao, Danying / Li, Haofei / Wang, Hailiang	Effects of the stearic acid modified mica powder on hydrophobic properties and salt freezing resistance of mortar: Experimental study and microscopic mechanism analysis	135188
Li, Yuanyuan / Hu, Bowen / Gao, Yangming / Feng, Jianlin / Kot, Patryk	Electrical characteristics and conductivity mechanism of self-sensing asphalt concrete	135236
Tang, Weichen / Sun, Junbo / Wang, Yufei / Chen, Zhaohui / Tang, Yunchao / Wang, Di / Zhao, Hongyu / Wang, Xiangyu	Electromagnetic absorption properties of 3D printed fiber-oriented composites under different paths	135140
Asa, Pelin / El Feghali, Christelle / Steixner, Christian / Tahouni, Yasaman / Wagner, Hans Jakob / Knippers, Jan / Menges, Achim	Embraced Wood: Circular construction method for composite long-span beams from unprocessed reclaimed timber, fibers and clay	135096
Cano-Ortiz, Saúl / Lloret Iglesias, Lara / Martinez Ruiz del Árbol, Pablo / Lastra-González, Pedro / Castro-Fresno, Daniel	An end-to-end computer vision system based on deep learning for pavement distress detection and quantification	135036
Jin, Zuquan / Liu, Yue / Jiang, Haosen / Zhang, Xiaoying	Enhanced photocathodic protection on 304SS in marine environment by Z-Scheme polydopamine-modified CdS	135216
Jiang, Jian-Wei / Kong, Si-cheng / Zhu, Ji-Hua / Pei, Chun	Enhancing and functionalizing cement mortar with one-step water-based graphene nanofluid additives	135104
Ates, Fatmanur / Woo, Byeong-Hun / Jang, Changhwan / Kim, Hong Gi	Enhancing cementitious composites with PCM-impregnated cork granules for sustainable and energy-efficient building elements	135071
Jittamaro, Pichthida / Maho, Buchit / Pongsopha, Phattharachai / Nicomrat, Duongruitai / Jamnam, Sittisak / Makul, Natt / Sua-iam, Gritsada	Enhancing the usability of electronic waste fibers in high-performance self-compacting mortar incorporating corn cob ash and silica fume: Fresh and hardened properties	135194
Amin, M. S. / Selim, Faten A. / Ramadan, M. / Mohsen, Alaa / Abu-Dief, Ahmed M. / Ahmed, Hoda A. / Hashem, Fayza S.	Evaluation of mechanical performance, corrosion behavior, texture characterization and aggressive attack of OPC-FMK blended cement pastes modified with micro Titania	135261
Sun, Zhilun / Chen, Jian / Liu, Shu / Qian, Jingbang / Huang, Rui	Evaluation of the performance of SBS/CR composite-modified deicing asphalt mixture prepared for ultra-thin wearing course	135085
Phan, Tam Minh / Ma, Hye-Ju / Park, Dae-Wook	Evaluation on performance of rubber tire powder and waste glass modified binder as crack filling materials using 3D printing technology	135225
Shi, Ke / Ma, Feng / Liu, Jenny / Fu, Zhen / Song, Ruimeng / Yuan, Dongdong / Ogbon, Aboudou Wassiou	Evolution of SBS-modified asphalt performance under aging and rejuvenation cycle conditions	135156
Oliveira, Mateus A. / Azenha, Miguel / Lourenço, Paulo B. / Meneghini, Anna / Guimarães, Erika T. / Castro, Fernando / Soares, Delfim / Ramesh, Meera	Experimental analysis of carbonation, humidity fields and the evolution of elastic modulus in air lime mortar	134930
Zan, Wenbo / Lai, Jinxing / Zhang, Wenjie / Yang, Qian / Qin, Yiwen / Su, Xulin	Experimental and applied research on similar materials to granular mixtures for solid-liquid coupling model test of an underwater tunnel	135170
Xu, Ran / Wang, Yao / Jiang, Fangming / Tang, Caoming / Yu, Jiangtao	Experimental and theoretical studies on the out-of-plane behavior of masonry strengthened with engineered cementitious composite	135084
Xu, Zhonggen / Guo, Xuan / Zhao, Yatao	Experimental and theoretical study on axial stiffness of CFRP-bolted timber joints with slotted-in corrugated steel plates	135001
Fu, Haiyan / Li, Zheng / Alhaddad, Wael / He, Minjuan	Experimental evaluation and theoretical prediction of dowel-type joints connecting laminated veneer lumber with wood dowels	135248
Liu, Sen / Su, Han / Xu, Jie / Zhou, Zhubing / Hao, Hailong / Wei, Leyong / Du, Jinsheng	Experimental study on tensile properties of HDPE sheath for parallel wire suspender after photo-oxidative aging	135304
Wang, Shanwei / Meng, Zhaobo / Zhao, Qingshuang / Zhao, Tengfei / Jin, Jie / Lu, Zhe	Experimental study on the characteristics and resistance against the coupling effect of freeze-thaw and chloride salt erosion of sticky rice-lime composites modified with metakaolin and hemp fibers	135240
Wang, Chaojie / Diao, Yueliang / Guo, Chengchao / Wu, Haoye / Guan, Huan / Qin, Lei / Chu, Xuanxuan / Du, Xueming	Experimental study on the mechanical behaviour of silty soil stabilized with polyurethane	135251
Wang, Siyu / Chen, Feixiang / Yu, Min / Liu, Teng / Zhu, Jinyun / Yin, Tianyi / Liu, Kangning / Yu, Rui	Exploring the effect of the micropore on the microstructure development of low water-cement ratio composite (LW/B-CC) subjected to microwave pre-curing	135141
Qu, Huisheng / Liu, Lang / Suo, Yonglu / Zhu, Mengbo / Wang, Ruofan / Yang, Pan / Xie, Geng / Luo, Yuan Yuan / Liu, Dongsheng	Failure behavior and fracture evolution mechanism of layered backfill considering dip angles	135041
Xu, Chao / Wu, Kai / Cao, Ping zhou / Sun, Yu yong / Yang, Ding guo	Failure mechanism and bearing capacity analysis of steel fiber steel reinforced concrete(SFSRC) beams	135063
Qin, Shanshan / Zhang, Ming / Zou, Dujian / Liu, Tiejun	A failure thickness prediction model for concrete exposed to external sulfate attack	135202
Ma, Xiaomeng / Xu, Li / Cai, Jingming / Zhang, Zhuoyang / Sun, Yuqin / Zhu, Weiwei / Pan, Jinlong	Feasible use of titanium slag in improving properties of low carbon fire-resistive cementitious composites at elevated temperatures	135272
Li, Minghui / Li, Peilin / Gao, Qingqing / Li, Saisai / Chen, Ruoyu / Wen, Haiming / Li, Canhua	Fly ash coated with alumina sol for improving strength and thermal insulation of mullite porous ceramics	135013
Daoudi, Ayoub / Eslami, Javad / Beaucour, Anne-Lise / Vigroux, Martin / Noumowé, Albert	High-temperature behaviour of various limestones at the block scale	135109
Giarma, Christina / Kampragkou, Petrini / Stefanidou, Maria	Hygrothermal properties of mortars containing perlite by-products	135065
Wang, Xue / Wei, Xinlei / Ni, Wen	Impacts of hydration degree of steel slag on its subsequent CO2 capture behaviors and mechanical performances of prepared building materials	135075
Li, Xiang / Yue, Kong / Tang, Zhongqiu / Lv, Chenglong / Li, Quan / Wu, Peng / Zhang, Zhongfeng	Improvement in fire resistance of glulam beams containing modified laminae by thermal treatment, inorganic impregnation and compression in the fire-side tension zone	135138
Park, Kyu Tae / Kim, Hong Gi / Kim, Jee-Sang / Woo, Byeong-Hun	Improving the thermoelectric performance of cement composites by substituting fine aggregate with silicon carbide	135068
Jahanbakhsh, Hamid / Nejad, F. Moghadas / Khodaii, Ali / Karimi, Mohammad M.	Induction heating and induced healing evaluation of the asphalt concretes incorporating conductive aggregates exposed to microwave radiation	135126
Devi, Ningombam Reena / Dhir, Prateek Kumar / Sarkar, Pradip	Influence of loading rate on bond shear strength of autoclaved aerated concrete masonry	135072
Zhu, Jianping / Ma, Di / Liu, Songhui / Guan, Xuemao / Shah, Surendra P.	The influence of nano-SiO2 on the carbonation properties of low calcium CO2 sequestration binder and its mechanism	135124
Li, Yuting / Zhang, Yongfa / Bi, Jing / Zhao, Yu / Li, Yang / Zhong, Xiujie / Zheng, Kun	Influences of calcium and magnesium sources on microbially modified strongly weathered phyllite filler	135118
Han, Zhiyu / Cong, Peiliang / Yu, Kexuan	Influences of molecular tail architectures of rejuvenators on their efficacies in restoring microstructures of reclaimed asphalt	135082
Liu, Wenchao / Luo, Rong / Xiao, Manzhe / Chen, Yu	Intelligent detection of hidden distresses in asphalt pavement based on GPR and deep learning algorithm	135089
Ren, Denghui / Xing, Susu / Luo, Wenjie / Meng, Fanyu / Zhao, Zhenxia / Feng, Quan / Li, Chunlin / Li, Jing	Investigating the efficacy of multidimensional MoS2/PAN fiber composites within styrene-butadiene-styrene enhanced asphalt binder	135208
Li, Cong / Bai, Jinrong / Jiang, Ying / Xiao, Huigang / Wang, Wei / Xu, Fan	Investigating the seepage control and plugging capabilities of polyurethane-cement composites: A comprehensive study on material properties	135191
Dong, Jingliang / Chen, Leiwei / Li, Lianghua / Zhou, Peng / Shi, Zhenhua / Cai, Jinping / Zhang, Tingting	Investigation into the alkali-activation of lithium slag: A sustainable alternative to conventional cement with optimized mechanical properties	135022
Zhang, Tianwei / Gao, Shanjun / He, Yanheng / Zhuang, Ronghua / Han, Xiaobin / Zou, Zhenyu / Yu, Jianying	Investigation of microstructure, rheological property and self-healing performance of SBS modified bitumen with dynamic disulfide bonds prepared by one-step method	135158
Kaplan, Ali Nadi / Tufan, Muhammed Zakir / Ozel, Cengiz	Investigation of some cellulose derivatives effects on concrete properties using response surface methodology	135115
Adnan, Abbas Mukhtar / Wang, Jinchang	Investigation of the effects of nano-Al2O3 addition on compatibility, rutting and fatigue properties of styrene-butadiene-rubber modified asphalt	135267
Li, Yizheng / Sha, Aimin / Wang, Zhen / Liu, Zhuangzhuang	Laboratory measurement of the adhesion strength between asphalt concrete and ice layer	135102
Ramezannia, Amin / Göcer, Özgür / Tabrizi, Toktam Bashirzadeh	The life cycle assessment of stabilized rammed earth reinforced with natural fibers in the context of Australia	135034
Chang, Siwei / Zheng, Bowen	A lightweight convolutional neural network for automated crack inspection	135151
Sarıdemir, Mustafa / Bulut, Metehan / Deniz, Suvat / Özgür Deneme, İbrahim	Long-term properties of steel fiber reinforced silica fume based AAMs at ambient and high temperatures	135046
Long, Dayu / Wang, Yu / Li, Changhong / Wu, Yunfeng	Macro-meso fatigue fracture and instability of rock-backfill composite structure under increasing-amplitude cyclic loading	135187
Min, Jihyeon / Son, Yongjun / Jang, Indong / Yi, Chongku / Park, Woojun	Managing two simultaneous issues in concrete repair: Healing microcracks and controlling pathogens	135125
Rong, Xian / Xu, Wanying / Zhang, Tingwei / Zhang, Jianxin	Mechanical and thermal properties of insulated mortar incorporated with GFRP powder	135259
Zhang, Hao / Su, Mingzhou / Yuan, Sen / Cai, Yuanzheng / Zheng, Yong / Sun, Yanwen	Mechanical behavior evaluation of stainless steel anchor channels with channel bolts under uniaxial tension	135268
Haigh, Robert	The mechanical behaviour of waste plastic milk bottle fibres with surface modification using silica fume to supplement 10% cement in concrete materials	135215
Liu, Ao / Kong, Dewen / Jiang, Jiatong / Wang, Lingling / Liu, Can / He, Runyun	Mechanical properties and microscopic mechanism of basalt fiber-reinforced red mud concrete	135155
Wang, Pengzhi / Bernard, Fabrice / Kamali-Bernard, Siham	Mechanical properties of calcium-silicate-hydrates (C-S-H) gel colloid at sub-micro scale by using molecular dynamics based cohesive zone representation of inter-globule interaction.	134683
Lu, Zhe / Feng, Zhen-Gang / Liu, Sicheng / Crispino, Maurizio / Ketabdari, Misagh / Toraldo, Emanuele / Li, Xinjun	Mechanism and performance evaluation of secondary regeneration of asphalt	135211
Guo, Haolong / Li, Hao / Wang, Hailong / Wei, Lisi / Li, Yue	Mechanisms of whisker-toughened hybrid fiber concrete based on fractal dimension and radar model	134877
Wang, Chunwei / Zhao, Liya / Guo, Zhiying / Hou, Chengyan / Yao, Suwan / Zhang, Fengshun / Fu, Chonghui / Zhang, Haibo	Mechanistic study of fly ash activity enhanced by high temperature to strengthen cementitious materials	135026
Alrefaei, Yazan / Ali, Hafiz Asad / Lao, Jian-Cong / Dai, Jian-Guo / Poon, Chi Sun	Micro and macro properties of silico-aluminophosphate geopolymer: Role of incinerated sewage sludge ash (ISSA)	135231
Wu, Jian-Dong / Guo, Li-Ping / Wang, Li-guo / Fei, Xiang-Peng / Chen, Ming-Hui / Yue, Hong-Ya / Xu, Run	Micromechanical design based on microscale fiber/matrix interactions for single PE fiber pullout	135117
Wang, Shujian / Han, Ling / Wu, Chuanshan / Zhao, Yongli / Zhang, Ronghua	Mix proportion design and production optimization of stone filled with cement stabilized macadam considering shrinkage resistance and easy construction	135235
Pang, Cunjun / Wu, Jie / Fan, Xianjie	Modification of shrinkage prediction model for partially enclosed steel reinforced concrete columns based on moisture diffusion analysis	135164
Fu, Qiuni / Xu, Ranwu / Kasal, Bohumil / Wei, Yang / Yan, Libo	Moisture-induced stresses and damage in adhesively bonded timber-concrete composite connection	135184
Wu, Hao / Ji, Xiaohui / Song, Weimin / Deng, Zicheng / Zhan, Yiqun / Zou, Xinhui / Li, Qian / He, Fei	Multi-scale analysis on fracture behaviors of asphalt mixture considering moisture damage	135234
He, A. / Liu, Y. / Sun, X. D. / Xu, Q. Q. / Jiang, D. Y. / Zeng, W.	A new elastic T-shape joint of longitudinally connected slab ballastless track structure for releasing thermal stress caused by non-uniform temperature loads	134997
Węgrzyk, Grzegorz / Grzęda, Dominik / Bulanda, Katarzyna / Oleksy, Mariusz / Ryszkowska, Joanna	A new method for determining the parameters of mechanical mixing using the example of polyurethane rigid foam synthesis	135205
Zhao, Xudong / Xu, Zhengzhong / Tian, Weichen / Lu, Jian-xin / Liu, Jiabao / Li, Shixiang / Shui, Zhonghe	A new scattering-filling process for regulating coarse aggregate and fiber spatial distribution in ultra-high performance concrete	135074
He, Rijin / Sun, Xiaoying / Wu, Yue / Fu, Jiyang	Nonlinear tearing residual strength characteristics of architectural fabric membranes: A numerical and theoretical investigation	135212
Wakjira, Tadesse G. / Kutty, Adeeb A. / Shahria Alam, M.	A novel framework for developing environmentally sustainable and cost-effective ultra-high-performance concrete (UHPC) using advanced machine learning and multi-objective optimization techniques	135114
Li, Jiange / Wang, Zhixiang / Chen, Chupeng / Zhang, Zhengqi	A novel reactive warm-mix rejuvenator and its effects of synergistic rejuvenation and temperature reduction on aged SBS modified bitumen	135266
Zhang, Cong / Zhou, Jinxin / Zheng, Xiangcou / Yang, Junsheng / Zhan, Shuangqiao / Yang, Lei	A novel water-swelling grouting material formulation and its performance for water rushing in karst strata	135245
Rayeesulhaq, Mohamed Ramsin / Ahamed, Mansoor Lizan / Khushnood, Rao Arsalan / Khan, Hammad Anis	Optimization in recipe design of interlocking compressed earth blocks by incorporating fine recycled concrete aggregate	135167
Han, Yang / Zhou, Mei / Wang, Jingjing / Tian, Yu / Wang, Xinyi	Optimization of coal-based solid waste ceramsite foam concrete mix proportions and performance study	135226
Wang, Daming / Miao, Chunjie / Song, Yuqi / Yi, Youqiu / Long, Jun / Zhang, Zixin / Lei, Tao	Optimizing aged asphalt performance: Innovative warm mix agent blends and rheological insights	135107
Ismail, Abdulmalik / Bahmani, Maysam / Chen, Xi / Wang, Jialai	An organic-inorganic hybrid microcapsule of phase change materials for thermal energy storage in cementitious composites	135289
Zhang, Bei / Yin, Xiaoka / Zhong, Yanhui / Zang, Quansheng / Wang, Zhenzhong / Kong, Lingchen / Zeng, Ziheng / Fu, Shaowei / Fu, Yu	Performance analysis and viscosity modeling of emulsified cutback composite cold-mixed epoxy asphalt binder	135171
Junaid, Muhammad Faisal / ur Rehman, Zia / Ijaz, Nauman / Farooq, Rashid / Khalid, Usama / Ijaz, Zain	Performance evaluation of cement-based composites containing phase change materials from energy management and construction standpoints	135108
Peng, Chao / Yang, Dongjin / You, Zhanping / Ruan, Di / Guan, Peiwen / Ye, Zhile / Ning, Yunfei / Zhao, Ni / Yang, Feiyu	A photothermal and superhydrophobic emulsified asphalt coating modified by CNTs and PTFE for anti-icing and de-icing applications	135148
Cheng, Yongzhen / Gao, Guohua / Chen, Lijun / Du, Wenjie / Mu, Weiye / Yan, Yulu / Sun, Huasheng	Physical and mechanical study of municipal solid waste incineration (MSWI) bottom ash with different particle size distribution	135137
Moura, Marinara Andrade do Nascimento / Leal, Cleber Eduardo Fernandes / Moreno, Armando Lopes / Ferreira, Gisleiva Cristina dos Santos / Parsekian, Guilherme Aris	Post-fire prediction of residual compressive strength of mortars using ultrasonic testing	135273
Ouyang, Jian / Jiang, Zhao / Yang, Hanwen / Li, Jing / Cao, Peng	Prediction model of asphalt emulsion evaporation rate based on CFD simulation and genetic programming-based symbolic regression	135021
Ahmed, Mshtaq / El-Sayed, Ahmed K. / Alhozaimy, Abdulrahman M. / Al-Negheimish, Abdulaziz I. / Alabdulkarim, Abdullah	Prediction of strand corrosion damage in prestressed concrete beams through visual inspection of corrosion concrete cracking	135232
Zhao, Geng / Zhang, Zhifeng / Ma, Ning / Wang, Ying / Cheng, Senhao	Preparation and characterization of cement mortar mixed with alternating field-magnetized water	135204
Xie, Tangxin / He, Zhongming / Yu, Huanan / Huang, Chao / Ou, Jianjun / Dai, Wan / Ge, Jinguo	The preparation and performance analysis of pavement photocatalytic material based on quantum dot heterostructures technology	135066
Qiyuan, Liu / Jinmei, Dong / Ruguang, Li / Chenggong, Chang / Yangyuanxiang, Xu / Jing, WEN / Weixin, Zheng / Derong, Wang / shengxia, An	Preparation and properties of fatty acid/alcohol composite phase change mortar	135195
Meng, Yongjun / Meng, Fujia / Chen, Jing / Wang, Zheng / Li, Yingwei / Deng, Shenwen / Wei, Xiangzhu / Gou, Chaoliang	Preparation of slow-release biologically active anti-icing filler and study on the anti-icing long-lasting performance	135150
Yao, Xingliang / Wu, Shuang / Ren, Changzai / Wang, Wenlong	Preparing sulfoaluminate cement using phosphogypsum as the only calcium oxide source: Effects of fluoride impurities	135296
Huang, Yujie / Bian, Zuwang / Ji, Weiyi / Yio, Marcus / Chen, Ziwei / Lu, Jian-xin / Cheeseman, Christopher / Poon, Chi Sun	Production of glass-ceramic aggregates from solid wastes for high-strength and low-shrinkage lightweight mortars	135244
Liu, Yanhui / Xu, Nan / Zhao, Shichun / Feng, Aosong / Yang, Hulin / Kang, Yuqiong / Che, Wangsu	Proposal and experimental verification of enhancement method for half-grouted sleeve connection quality	135161
Gao, Qi / Lin, Qiuqin / Gan, Jian / Yu, Wenji	Punctated microcracked structure to enhance the mildew resistance of wood scrimber	135237
Zhi, Dian / Xia, Peng / Wang, Shiqi / Gong, Fuyuan / Cao, Wanlin / Wang, Dongmin / Ueda, Tamon	RBSM-based mesoscale study of mechanical properties and frost damage behaviors for recycled fine aggregate concrete	135136
Miyan, Nausad / Omur, Tarik / Amed, Bahadur / Ozkan, Hakan / Aydın, Rıdvan / Kabay, Nihat	Recycled waste concrete and metakaolin based alkali-activated paste: Characterization, optimization, and life cycle assessment	135233
Xia, Peng / Wang, Shiqi / Chen, Keyu / Meng, Tao / Chen, Xudong / Gong, Fuyuan	A recycling approach of natural stone from crushed concrete based on freeze-thaw modification and usage of spalling mortar as recycled fine aggregate	135287
Nguyen, Quang Tuan / Tran, Bao Viet / Nguyen, Mai Lan / Hoang, Thi Thanh Nhan / Chailleux, Emmanuel / Bui, Van Phu	Relationships between 3D linear viscoelastic properties of bitumen, asphalt mastics and asphalt mixtures using micromechanical models	135299
Ma, Hongqiang / Fu, Congcong / Dai, Enyang / Huang, Kang / Zhang, Shaochen / Feng, Jingjing	Research on the effect of 60 ℃ thermal cycling on the properties of alkali-activated fly ash-slag materials: A new perspective	135192
Luo, Yiping / Liu, Yufan / Wang, Defa / Liu, Lang / Gao, Xiang / Zhang, Qianzheng / Zhang, Jie	Research on UV aging evolution mechanism of metakaolin base geopolymer coatings	134935
Dai, Wan / Qian, Guoping / Zhu, Xuan / Yu, Huanan / Shi, Changyun / Zhang, Chao / Ge, Jinguo / Xie, Tangxin	Research on void characteristics during compaction of asphalt mixtures	135069
Shen, Linghua / Li, Yuefan / Zhao, Hui / Wang, Jiyang / Xu, Shilang	Residual flexural behaviour of RC beams strengthened with TRC after ISO 834 exposure	135152
Xue, Yanhua / Liu, Chaochao / Shi, Qijia / Ju, Zihao / Fan, Guopeng / Zhang, Chen / Lv, Songtao	Road performance and mechanism of Hot in-place recycling asphalt mixture modified by direct-to-plant SBS	135122
Xia, Huiyun / Lv, Xin / Wang, Hao / Song, Lifang / Zhang, Gengtong / Cao, Dongwei / Chen, Huaxin	Shrinkage, mechanical properties and freeze-thaw resistance of cement mortar containing internal curing materials with different absorption behaviors at low humidity	135182
Sun, Zhen / Li, Yalin / Yang, Yuxi / Su, Li / Xie, Shijie	Splitting tensile strength of basalt fiber reinforced coral aggregate concrete: Optimized XGBoost models and experimental validation	135133
Liao, Yongpang / Lv, Yan / Huang, Guo / Ren, Shengli / Wang, Xiao-Yong / Guo, Rongxin / Tian, Yujia / Deng, Shihan / Lin, Run-Sheng	Strength and microstructure analysis of subgrade materials containing red sandstone-limestone-cement composites and red sandstone gravel	135190
Casagrande, Daniele / Setti, Alessandro / Polastri, Andrea	Structural behaviour of light-frame timber shear-walls with diagonal board sheathing	135077
Huang, Jie / Niu, Ditao / Wu, Hongqu / Fu, Qiang	Study on corrosion characteristics of reinforcing bars in concrete under industrial SO2 environment	135177
Feng, Yong / Wang, Qian / Yang, Xiaochen	Study on micro-mechanical properties of EVA modified rubber-cementitious materials based on molecular dynamics simulation	135132
Zhang, Xiaofeng / Peng, Zhigang / Feng, Qian / Zheng, Yong / Chen, Xuewen / Zhang, Bojian / Zhang, Haojun	Study on reducing the brittleness of oil well cement by preparing nano-SiO2/epoxy resin composite elastic microspheres based on Pickering emulsion	135143
Liang, Haishan / Song, Shimao / Liu, Xiufen / Sun, Fengyuan / Cao, Zhenhao / Liu, Yifan / Ren, Yufang / Li, Xue	Study on the inhibition effect and mechanism of basic zinc carbonate composite asphalt fumes suppressant	135220
Jeyakaran, Thuraisingam / Pornsiri, Niraporn / Saengsoy, Warangkana / Tangtermsirikul, Somnuk	Surface treatments to control concrete deterioration caused by iron sulfide-bearing aggregates	135189
Liu, Yi-Zhao / Zhang, Chao-Zhe / Wu, Kai / Liu, Song-Yu	Sustainable stabilization/solidification of Cd and Pb in industrially heavy metal-contaminated site soils using a novel binder incorporating bone meal and fly ash	135162
Mashayekhi, Amirhesam / Hassanli, Reza / Zhuge, Yan / Ma, Xing / Chow, Christopher W. K.	Synergistic effects of fiber hybridization on the mechanical performance of seawater sea-sand concrete	135087
Sun, Tong / Wang, Xinyue / Maimaitituersun, Nueraili / Dong, Sufen / Li, Luyu / Han, Baoguo	Synergistic effects of steel fibers and steel wires on uniaxial tensile mechanical and self-sensing properties of UHPC	134991
Subhani, Hassan Ali / Khushnood, Rao Arsalan / Shakeel, Sarmad	Synthesis of recycled bricks containing mixed plastic waste and foundry sand: Physico-mechanical investigation	135197
Liu, Jintao / Dai, Xiaosheng / Yu, Xingyang / Yao, Chengyang / Zhao, Xin / Kong, Deyu	Tensile behaviour and full-field strain of reactive powder concrete under dynamic loading: Effects of fibre length and content	135008
Tahsiri, Hamidreza / Belarbi, Abdeldjelil / Gencturk, Bora	Thermal effects on transfer length and prestress losses in CFRP prestressed prisms	135160
Han, Weiwei / Chen, Huisu / Song, Shaomin	Thermodynamic modeling of the effect of temperature on the phase assemblage of magnesium ammonium phosphate cement	135178
Hou, Xuan / Ma, Shuhua / Wang, Xiaohui / Ou, Yanjun / Liu, Ruiping	Transformation of fly ash into a fluffy C-S-H material: Enhancing chemical properties and advancing the utilization of portland cement	135198
Amin, Md Tanvir Ehsan / Sarker, Prabir Kumar / Shaikh, Faiz Uddin Ahmed	Transport properties of concrete containing lithium slag	135073
Xiong, Yuanliang / Zhang, Zedi / Huo, Binbin / Zhang, Chao / Liu, Chao / Zhang, Yamei	Uncovering the influence of red mud on foam stability and pore features in hybrid alkali-activated foamed concrete	135309
Yang, Yuanquan / Han, Jiamin / Liu, Runqing	Understanding hydration properties of magnesium potassium phosphate cement with low magnesium-to-phosphate ratio	135221
Han, Yudong / Xie, Yue / Li, Wei / Yue, Qingrui / Liu, Yongliang / Peng, Bo	Using SAP to control the deformation of shrinkage-compensating concretes at early age	135139
Cottrell, Jack Andrew / Ali, Muhammad / Etienne, Gary	Utilisation of construction, demolition and excavation waste for the production of compressed trommel fines blocks	134985
Paniagua-Hernández, Viviana / Torres-Quirós, Cindy / González-Rodrigo, Beatriz / Murillo-Montero, Jimena	Volcanic atmospheres impact on mechanical properties of Tectona grandis and Cupressus lusitanica in early stages of outdoor exposure	134933
Xiong, Bobo / Li, Mingfu / Lu, Xiaochun / Tian, Bin / Li, Jiahui / Chen, Bofu	Water transport and pore characteristics of mortar under sustained load	135121

About this
data sheet
IssueID
71922
Published on:
15/03/2024
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - February 2024

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - February 2024

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.