Construction and Building Materials - October 2023

Published:	October 2023

Articles in this Issue

Author(s)	Title	Page(s)
Kristombu Baduge, Shanaka / Thilakarathna, Sadeep / Perera, Jude Shalitha / Ruwanpathirana, Gihan P. / Doyle, Lachlan / Duckett, Mitchell / Lee, Joel / Saenda, Jiratigan / Mendis, Priyan	Assessment of crack severity of asphalt pavements using deep learning algorithms and geospatial system	132684
Raza Khan, Ali / Ali, Ayman / Pandya, Harshdutta / Alfalah, Ahmad / Mehta, Yusuf / Elshaer, Mohamed / DeCarlo, Christopher	Assessment of the impact of binder grade on the laboratory performance of fiber reinforced asphalt mixtures	132735
Kanagaraj, Balamurali / Anand, N. / Jerry, Rohith / Samuvel Raj, R. / Lublóy, Éva	Axial compressive behaviour and physical characteristics of high strength self-compacting geopolymer concrete (HSGC) columns exposed to elevated temperature	132866
Yu, Jincheng / Qian, Jueshi / Chen, Huaxin / Ji, Yongan / Kuang, Dongliang / Jia, Xingwen / Guan, Bowen	Behavior of magnesium phosphate cement with addition of sulphoaluminate cement at elevated temperatures	132932
Deng, Rongsheng / Chen, Bao	Bentonite homogenization with technological voids upon hydration	132910
Zhou, Yaming / Zhang, Ru / Zhang, Jianhai / Li, Yonghong / Li, Zhiguo / Xing, Xianglin / Zhang, Qianjin / Feng, Gan	Brazilian splitting testing of the restorative properties of eco-friendly epoxy resin on cracked granite samples with various widths	132907
Chen, Ye / Li, Hongjun / Yu, Wen / Dong, Xinze / He, Guofeng / Wu, Tongda	Characterization of the micromorphology of asphalt surfaces using atomic force microscopy	132845
Chen, Lijie / Khan, Mahram / Deng, Xiaowei / Su, Ray K. L.	Chloride-induced corrosion propagation of alkali-activated slag mortar with pulverized fuel ash and metakaolin replacements	132707
Hou, Chen / Wang, Qing / Song, Wenhao / Xu, Shuangshuang / Li, Zhe / Zhuo, Xiaoya	Chlorine resistance of tannic acid anticorrosive coating on galvanized steel in simulated concrete pore solution	132657
Julián Rivera, J. / Battista, Nicolás D. / Oviedo, Adrián / Rebollo, Oscar R. / Zapata Ferrero, Ignacio / Fensel, Enrique A. / Luis Delbono, H. / Martìnez, Adriana H.	Cold mix asphalt with polymeric stone for low traffic volume roads	132714
Aseem, Ahmed / Ng, Ching Tai	Collinear nonlinear guided wave mixing for debonding detection in reinforced concrete beam using longitudinal and torsional wave modes	132876
Suh, Heongwon / Kim, Gyeongryul / Cho, Seongmin / Li, Peiqi / Son, Dong-Hee / Koo, Doheon / Lim, Jun / Choi, Chang-Sik / Seok, Seungwook / Bae, Sungchul	Comparative analysis of the synergistic effects of hybrid nanomaterial reinforcement in cementitious composites: A perspective for pore refinement and thermal resistance	132856
Ruan, Wenqiang / Zhang, Zhenguang / Cai, Mengmeng / She, Yimeng / Liu, Jiatai / Guo, Wenjie / Ma, Xiaoe / Liao, Jianguo / He, Xiaofang	Comparative study of the effects of magnesium aluminum silicate and bentonite clay on the properties of magnesium phosphate cement-based grouting material	132852
Soares, Augusto Cezar Maciel / Costa, Hugo / do Carmo, Ricardo / Rodrigues, Ana / Gaspar, Florindo / Júlio, Eduardo	Comprehensive design methodology for 3D printing mortars	132804
Lee, Hye-Jin / Yang, Keun-Hyeok	Compressive and flexural toughness indices of lightweight aggregate concrete reinforced with micro-steel fibers	132965
Liu, Ru-Rui / Ding, Ran / Fan, Jian-Sheng / Tao, Mu-Xuan	Constitutive laws of softened UHPC in biaxial tension–compression: Experimental study using a planar bi-directional element tester	132966
Montazeri, Fatima / Ahmadi, Hamid Reza / Ghahari, Mehdi	Creating anti-slip properties in porcelain floor tiles by recycling alumina rollers from tile kilns	132969
Rachman, Firmansyah / Yang, Shih-Hsien / Riadhotussolihah, Septia / Chintya, Hanna / Chen, Yin-Hong / Fini, Elham	Deagglomeration of Asphalt Binder Using Kraft Lignin: A Sustainable Valorization of Waste from the Pulping Industry	132725
Wei, Xueda / Qiao, Xiaolei / Chen, Tielin	Design framework for rehabilitation grout materials during metro operation period: A combination of improved central composite design modeling and multi-objective particle swarm optimization	132690
Ehsani, Mehrdad / Hajikarimi, Pouria / Esfandiar, Masoud / Rahi, Mohammad / Rasouli, Behzad / Yousefi, Yousef / Nejad, Fereidoon Moghadas	Developing deterministic and probabilistic prediction models to evaluate high-temperature performance of modified bitumens	132808
Cao, Feng / Qiao, Hongxia / Zhang, Yunsheng / Li, Shuangying / Cui, Lijun	Early-age performance and mechanism of magnesium oxychloride cement mortar mixed with highland barley straw ash	132979
Tian, Feiyu / Mao, Wei / Xu, Xinwu	Effect of a layered combination of APP and TBC on the mechanics and flame retardancy of poplar strandboards	132881
Luan, Yingcheng / Zhang, Weiguang / Ma, Tao / Cao, Jinde / Shi, Xinli / Tong, Zheng	Effect of existing pavement condition and overlaying strategy on the reflective cracking resistance of asphalt pavement	132620
Feng, Zhizhuo / Shen, Dejian / Huang, Quan / Zhang, Tingting	Effect of fly ash on early-age properties and viscoelastic behaviors of supersulfated cement concrete under different degrees of restraint	132895
Scherer, Camila / Felippi de Lima, Luiza / Eunice Zorzi, Janete	Effect of partial replacement of cement by fine powders on the corrosion resistance of concrete	132982
Wang, Zhongli / Xia, Tian / Xu, Jianhui / Li, Youbing / Wang, Min	Effect of polyurethane addition on the dynamic mechanical properties of cement emulsified asphalt	132693
Gong, Xiangbing / Huang, Xue / Qian, Guoping / Liu, Hongfu	Effect of thickness on the behavior of aggregate-asphalt-aggregate film subjected to dynamic shearing and uniaxial tension	132680
Das, Kunal Krishna / Sharma, Raju / Dutta, Sagar / Seo, Joonho / Jang, Jeong Gook	Effects of curing regime, cement type, and water-to-cement ratio on the physicochemical, mechanical, and hydraulic properties of pervious mortar	132897
Klima, K. M. / Luo, Y. / Brouwers, H. J. H. / Yu, Qingliang	Effects of mineral wool waste in alkali activated-artificial aggregates for high-temperature applications	132937
Li, Jingzhe / Zhan, Binggen / Gao, Peng / Hu, Li / Qiao, Min / Sha, Huiling / Yu, Qijun	Effects of recycled concrete powders on the rheology, setting and early age strength of cement paste	132899
Li, Jing / Tang, Fei	Effects of two metal nanoparticles on performance properties of asphalt binder and stone matrix asphalt mixtures containing waste high density polyethelene	132787
Daneshvari, Mohammad Hassan / Nourmohammadi, Ebrahim / Ameri, Mahmoud / Mojaradi, Barat	Efficient LBP-GLCM texture analysis for asphalt pavement raveling detection using eXtreme Gradient Boost	132731
He, Haijie / Shuang, E. / Wen, Tiande / Yao, Jun / Wang, Xiaogang / He, Chuang / Yu, Yang	Employing novel N-doped graphene quantum dots to improve chloride binding of cement	132944
Amjad, Hassan / Ahmad, Farhan / Qureshi, Muhammad Irshad	Enhanced mechanical and durability resilience of plastic aggregate concrete modified with nano-iron oxide and sisal fiber reinforcement	132911
Khan, Adnan / Huyan, Ju / Zhang, Runhua / Zhu, Yu / Zhang, Weiguang / Ying, Gao / Ahmad, Kamal Nasir / Shah, Syed Khaliq	An ensemble tree-based prediction of Marshall mix design parameters and resilient modulus in stabilized base materials	132833
Prusty, Jnyanendra Kumar / Pradhan, Bulu	Evaluation of durability and microstructure evolution of chloride added fly ash and fly ash-GGBS based geopolymer concrete	132925
Rambabu, Dadi / Sharma, Shashi Kant / Abdul Akbar, M.	Evaluation of roller compacted concrete for its application as high traffic resisting pavements with fatigue analysis	132977
Liao, Hui / Tavassoti, Pejoohan / Sharma, Aditi / Baaj, Hassan	Evaluation of rutting resistance and moisture susceptibility of high RAP content asphalt mixtures containing bio-based rejuvenators	132859
Ranatunga, Kavishan Sathsara / del Rey Castillo, Enrique / Toma, Charlotte Louise	Evaluation of the optimal concrete mix design with coconut shell ash as a partial cement replacement	132978
Ling, Senlin / Jelagin, Denis / Sun, Daquan / Fadil, Hassan	Experimental and numerical analyses on the fracture characteristics of cement-asphalt mastic-aggregate interface	132971
Li, Haifeng / Li, Yinglei / Xiong, Zhe / Shu, Zhi / Hong, Yiping / Chen, Saijian / Su, Yue	Experimental and theoretical study on elliptical rubber concrete filled double-skin GFRP short tubes under axial compression	132796
Pan, Gaofeng / Yuan, Shengyang / Zheng, Yixuan / Tian, Maocheng / Wang, Yibo / Liu, Xianfeng	Experimental investigation on the effect of initial structure on the water retention behavior of Mile clay	133000
Şimşek, Barış / Uygunoğlu, Tayfun / Uğur, Mücahit / Ceran, Özge Bildi / Dilmaç, Ömer Faruk	Experimental investigations of aluminum hydroxide nanoparticles on properties of cementitious composites using macro and micro scale tests	132955
Furtado, André / Rodrigues, Hugo / Arêde, António	Experimental study of the flexural strength of masonry brick walls strengthened with thermal insulation	132934
Qiang, Xuhong / Chen, Longlong / Jiang, Xu / Dong, Hao	Experimental study on anchorage and activation performance of Fe-SMA strips for structural reinforcements	132961
Jin, Hesong / Liu, Jun / Zhong, Daojun / Tang, Luping	Experimental study on chloride ion diffusion behavior and microstructure in concrete under alternating ambient humidity conditions	132886
Wang, Xiaodong / Li, Ningjing / Wang, Wenqi	Experimental study on crushing of concrete slabs by high-voltage pulse discharge	132951
Zhang, Jiqiang / Dong, Wei / Zhang, Binsheng	Experimental study on local crack propagation of concrete under three-point bending	132699
Yang, Yang / Xu, Cheng / Xia, Liujia / Tao, Qiyu	Experimental study on mechanical properties of new FRP trusses reinforced sleepers under the stacking condition	132816
Zeng, Cheng / Zhao, Guohan / Xie, Jiawei / Huang, Jinsong / Wang, Yankun	An explainable artificial intelligence approach for mud pumping prediction in railway track based on GIS information and in-service train monitoring data	132716
Prakash, Bhaskar / Saravanan, T. Jothi / Kabeer, K. I. Syed Ahmed / Bisht, Kunal	Exploring the potential of waste marble powder as a sustainable substitute to cement in cement-based composites: A review	132887
Abd-El-Raoof, F. / Youssef, H. F. / El-Sokkary, T. M. / Abd El-Shakour, Z. A. / Tawfik, A.	Fabrication and characterization of calcium aluminates cement via microwave-hydrothermal route: Mayenite, katoite, and hydrocalumite	132988
Chen, Qingsheng / Rong, Huiyang / Tao, Gaoliang / Nimbalkar, Sanjay / Xie, Kai	Fatigue characteristics of nano-SiO2 cemented soil under coupled effects of dry-wet cycle and seawater corrosion	132579
Zhang, Liying / Ding, Enjie / Bai, Ben / Wang, Xue / Zhang, Wenting / Liu, Wanshuang / Bi, Shuguang	Fe3O4 incorporated geopolymer nanocomposites for microwave absorption: Role of size, structure, and dispersion	132985
Zhao, Yuechao / Chen, Meizhu / Wu, Shaopeng / Zhu, Yunsheng / Zhou, Xinxing / Yang, Chao / Zhao, Zenggang / Zhang, Jianwei / Chen, Dongyu	Feasibility assessment of palmitamide derived from waste edible oil as a warm mix asphalt additive	132972
Sun, Zhigao / Wu, Yuan / Xie, Han / Jin, Siqingaowa / Zhang, Dongliang / Wang, Mitang	Feasibility of high-magnesium nickel slag-fly ash as precursor of magnesium phosphate cement and its hydration mechanism	132880
Traver, Celia / Ruiz-Pinilla, Joaquín G. / Monserrrat, Andrea / Montoya-Coronado, Luis A. / Miguel, Pedro F. / Ribas, Carlos / Cladera, Antoni / Bonet, José L.	Feasibility of iron-based shape memory alloy strips for shear strengthening of damaged RC beams promoting the formation of plastic hinges	132906
Yu, Liang / Bi, Haifeng / Wang, Zengyao / Wu, Fengnian / Hou, Pengkun / Wang, Shoude / Huang, Yongbo / Cheng, Xin	Feasibility of using iron-rich phosphoaluminate cement to prepare anti-corrosive coatings for rebars	132736
Zhang, Tingting / Lu, Yao / Lu, Zeguang	A flame-retardant corn straw brick (FRCSB): Thermal stability, flammability and flame-retardant mechanism	132927
Mostafa, Omar M. / Rahman, Muhammad K. / Al-Zahrani, Mesfer M. / Adekunle, Saheed K. / Al-Osta, Mohammed A. / Najamuddin, Syed K.	Flexural behavior and bond coefficient of BFRP bar reinforced normal and high strength concrete beams	132896
Dai, Xiaodi / Aydın, Serdar / Yardımcı, Mert Yücel / De Schutter, Geert	Fresh and hardened state properties, reaction kinetics and microstructure of sodium sulfate/sodium hydroxide – Activated slag mixtures	132943
Mouzoun, Kaoutar / Bouyahyaoui, Azzeddine / Cherradi, Toufik / Zemed, Najib / Simou, Sana	From waste to strength: Experimental design and optimization of mechanical properties of concrete using reused PVC-U drainage pipes	132938
Gao, Yang / Kainuma, Shigenobu / Yang, Muye / Ishihara, Shuji / Inoue, Daichi	Galvanic corrosion behavior of hot-dip Al and 55Al–Zn coatings applied to steel bolted joints in atmospheric environments	132694
Gong, Xing / Liu, Quantao / Liu, Xuefei / Wan, Pei / Jiang, Peng / Chen, Shuaichao / Wang, Huan / Wu, Shaopeng	Green synthesis of end-capped polyurethane prepolymer with high storage stability and its effects on bitumen properties	132860
Yue, Yanan / Gao, Shuling / Li, Ning / Zhang, Rui	High-cycle fatigue performance of corroded Q690E high strength steel and Q690qENH high-strength weathering steel	132835
Gao, Yu / Gao, Jinrui / Rao, Meijuan / Wang, Fazhou / Yang, Lu	High-ferrite Portland cement with glass–ceramic aggregates: Mechanical properties, durability, and interfacial transition zone	132884
Hu, Jianying / Liu, Hao / Li, Yuwei / Ma, Tao	Highly reflective and fluorescent TiO2 quantum dots modified asphalt coating: Engineering characterizations and microclimatic modelling	132701
Lu, Chang / Zhang, Zhengqi / Qiang, Yakui / Zhao, Fuqiang / Wang, Dong	A hydrophobic and sustainable anti-icing sand fog seal for asphalt pavement: Its preparation and characterization	132918
Liu, Yuqing / Ding, Weijian / Dong, Peng / Okude, Nobuhiro / Asaue, Hisafumi / Shiotani, Tomoki	Identification of hydration stages: An innovative study of ultrasonic coda waves using integrated sensing element (ISE)	132764
Li, Lin / Ye, Tong / Li, Yizheng / Wang, Zhen / Feng, Zhe / Liu, Zhuangzhuang	Improvement of microporous structure and impermeability of cement mortars using fly ash and blast furnace slag under low curing pressures	132890
Shahat, M. Abdelhamid / Ahmed, Yasser M. Z. / Ghitas, Ahmed / El‑Shater, Abdel‑Hamid / Soliman, Wafaa	Improving the thermophysical aspects of innovative clay brick composites for sustainable development via TiO2 and rGO nanosheets	132981
Yang, Peijian / Tian, Wenling / Qing, Longbang	In-plane shear behavior of brick masonry walls strengthened with basalt textile-reinforced concrete	132732
Yang, Shuoyong / Luo, Peng / Wu, Yue	The influence of climatic factors on the sublimation and mechanical properties of paper fiber reinforced ice as building envelope	132967
Xu, Haiqin / Wu, Shaopeng / Chen, Anqi / Li, Zhenpeng / Zou, Yingxue / Cui, Peide	Influence of hybrid fibers on rheological properties of asphalt binders and its prediction with computing techniques	132904
Lu, Xiang / Tian, Ya / Jiskani, Izhar Mithal / Zhou, Wei / Zhao, Binyu / Ding, Xiaohua / Ao, Zhongchen	Innovate geopolymer synthesis for green mine road construction: Analysis of efflorescence behavior and strength analysis	132963
Zhang, Li / Sun, Luyi / Guan, Xuemao / Liu, Songhui	Insight into carbonation reactivity of polycrystalline CS by DFT simulation	133008
Karkoodi, Sadaf / Karampour, Hassan / Lyu, Chunhao / Gilbert, Benoit P. / McGavin, Robert L. / Gunalan, Shanmuganathan / Ghanbari-Ghazijahani, Tohid	An investigation of a novel wood fibre-filled steel tubular (FFST) systems for construction	132939
Zhang, Yao / Sang, Tianyi / Kang, Aihong / Wang, Benshuai / Wu, Xing / Zhao, Yulong	Investigation of fiber length distribution on crack resistance mechanism of basalt fiber asphalt mixture based on digital image processing technology	132753
Zhao, Qingxin / Shi, Yuxuan / Xue, Caihong / Jia, Yali / Guo, Weichao / Wang, Di / Wang, Shuai / Gao, Yongshuai	Investigation of various curing methods on the properties of red mud-calcium carbide slag-based artificial lightweight aggregate ceramsite fabricated through alkali-activated cold-bonded pelletization technology	132956
Ju, Zihao / Ge, Dongdong / Lv, Songtao / Xue, Yanhua / Duan, Defeng / Deng, Yajun / Chen, Jiafu	Investigation on fatigue characteristics of polyphosphoric acid modified high dosage bio-asphalt mixture under three-dimensional stress state	132749
Abdelmagid, Alaaeldin A. A. / Qiu, Yanjun / Yang, Enhui	Laboratory investigation of the impact of peanut husk ash as an asphalt binder modifier on physical and rheological properties	132920
Yu, Miao / Yang, Zhi / You, Zhanping / Luo, Yansheng / Li, Jue / Yang, Liming	Laboratory investigation of traffic effect on the long-term skid resistance of asphalt pavements	132642
Chen, Huayan / Wang, Fengxuan / Luo, Caisong / Yang, Mianyue / Fu, Chaojiang / Wang, Bizhen / Lin, Youfeng	Lateral impact test and inertial force of concrete-filled steel tube column	132928
Han, Lei / Liao, Yingying / Wang, Haoyu / Zhang, Hougui	Long-term prediction for railway track geometry based on an optimised DNN method	132687
Jiang, Kaidi / Wang, Xin / Ding, Lining / Chen, Zhiyuan / Huang, Huang / Liu, Xia / Liu, Jianxun / Wu, Zhishen	Mechanical properties of multi-scale mono/hybrid non-metallic fiber-reinforced ultra-high performance seawater sea-sand concrete	132922
Abd Ellatief, Mohamed / Abadel, Aref A. / Federowicz, Karol / Abd Elrahman, Mohamed	Mechanical properties, high temperature resistance and microstructure of eco-friendly ultra-high performance geopolymer concrete: Role of ceramic waste addition	132677
Xie, Huijun / Liu, Yizhou / Long, Zhengwu / Xu, Fu / You, Lingyun / Tang, Xianqing / Zhu, Chongzheng / Ding, Yanhuai	Micro-characterization of the adhesion properties and mechanisms at the asphalt-silica aggregate interface under combined thermal-oxygen aging and chloride salt erosion	132818
Ismail, Abdulmalik / Wang, Jialai / Salami, Babatunde Abiodun / Oyedele, Lukumon O. / Otukogbe, Ganiyu K.	Microencapsulated phase change materials for enhanced thermal energy storage performance in construction materials: A critical review	132877
Gu, Yushan / Machner, Alisa / De Weerdt, Klaartje / Šajna, Aljoša / Hanzic, Lucija / Müller, Arnaud / Bary, Benoît	Modeling the durability of novel cementitious materials prepared with CEM II/C-M exposed to drying and carbonation	132625
Mardmomen, Seyednavid / Chen, Hung-Liang (Roger)	Modeling the thermal and mechanical properties of early age concrete containing ground granulated blast furnace slag	132902
Dahal, Mandip / Park, Sungwoo / Pyo, Sukhoon	A modified approach for measuring the air permeability of ultra-high performance concrete (UHPC) under vacuum conditions	132933
Heydari, Soheil / Hajimohammadi, Ailar / Haji Seyed Javadi, Nioushasadat / Jeremy Kien Chung Ng, James / Emmanuel Kypreos, John / Khalili, Nasser	Modified asphalt by coffee cup Fibres: An optimum mix design using response surface method	133005
Zhu, Yimeng / Li, Wugang / Liu, Wenhua / Yang, Lanlan / Wang, Long	A new approach to improving the water resistance of MOC-solidified sludge using HCO3	132959
Wang, Lusong / Cao, Min / Li, Xianbo / Du, Weifan / Wang, Xianchen	A novel approach for improving the water resistance of gypsum plaster by internal mixing hypromellose and external coating waterproofing agent	132940
Shao, Wei / Li, Qingming / Zhang, Wenbing / Shi, Danda / Li, Hanhan	Numerical modeling of chloride diffusion in cement-based materials considering calcium leaching and external sulfate attack	132913
Wu, Zhengda / Ge, Dongdong / Ju, Zihao / Xue, Yanhua	The performance evaluation of extracted asphalt binder from dry process produced rubber modified asphalt mixture	131864
Yang, Dong / Li, Haitao / Hong, Chaokun / Lorenzo, Rodolfo	Performance of single-bolted laminated flattened-bamboo connection with steel plate under compression parallel to grain – An experimental and numerical study	132774
Yang, Pan / Liu, Lang / Suo, Yonglu / Xie, Geng / Sun, Weiji / Zhang, Caixin	Physical-chemical coupling excitation of low activity coal gasification slag solid waste and its application as a backfill cementitious material	132973
Günay, Taylan / Katanalp, Burak Yiğit / Taştan, Murat / Ahmedzade, Perviz	A posterior hybrid ML optimization to analyze the relationship between high temperature rheological factors of the Superpave PG and improved PG + asphalt specifications	132803
Wang, Xiaodong / Zeng, Jingyi / Qin, Changjin / Tang, Dingding / Yang, Jin / Zhao, Huang / Zhou, Yan / Ye, Hualiang / Zheng, Bijuan / He, Xingyang	Potential industrial approach for efficient dispersion of silica fume: Rapid wet-grinding dispersion technique	132893
Tanash, Alaa Omar / Muthusamy, Khairunisa / Yahaya, Fadzil Mat / Ismail, Mohamed A.	Potential of recycled powder from clay Brick, sanitary Ware, and concrete waste as a cement substitute for Concrete: An overview	132760
Wei, Shihua / Zheng, Keren / Chen, Lou / Zuo, Shenghao / Zhou, Xiaofeng	The prediction of alkali-silica reaction based on the alkali-Al ratio of pore solution using thermodynamic modeling	132929
Salehi, Safoura / Arashpour, Mehrdad / Golafshani, Emadaldin Mohammadi / Kodikara, Jayantha	Prediction of rheological properties and ageing performance of recycled plastic modified bitumen using Machine learning models	132728
Hu, Nanyan / Liu, Yujie / Ke, Lihua / Ye, Yicheng / Jia, Jinpeng / Sun, Zhenhao / Chen, Dunxi	Preparation and frothing mechanism of froth concrete based on solid waste: A review	132831
Wang, Yingbin / Wang, Jiafei / Wu, Yejun / Li, Yang / He, Xingyang / Su, Ying / Strnadel, Bohumír	Preparation of sustainable ultra-high performance concrete (UHPC) with ultra-fine glass powder as multi-dimensional substitute material	132857
Cai, Qiang / Li, Peizhen / Luo, Jingjing / Feng, Jiahui / Wu, Kai / Xu, Linglin	Production of green autoclaved bricks from waste quarry sludge: Mechanical and microstructural aspects	132874
Sadeghi, J. / Vasheghani, M. / Khajehdezfuly, A.	Propagation of structure-borne noise in building adjacent to subway lines	132765
Al-Taie, Asmaa / Yaghoubi, Ehsan / Gmehling, Ernie / Fragomeni, Sam / Disfani, Mahdi / Guerrieri, Maurice	Recycled aggregate blends for backfilling deep trenches in trafficable areas	132942
Zeng, Lan / Wu, Liqi / Li, Boqin / Fang, Shu / Mohamed, Hazem Samih / Fang, Zhuangcheng / Yuan, Hong	Recycled aggregate concrete-filled steel tube columns with small-diameter circular FRP-confined sea-sand concrete cores: Conceptual and experimental investigations	132853
Liu, Gang / Tang, Yanjie / Wang, Jianyun	Recycling and valorization of hydrated cement blends in mortars via semi-dry carbonation – The role of waste glass, granulated blast furnace slag and fly ash	132987
Rodulfo, Perla / Wang, Boyu / Gupta, Rishi / Sharma, Loveleen / Mukhopadhyaya, Phalguni	Relationship between electrical Conductivity, Half cell Potential, Linear polarization resistance and Macrocell current of cementitious repair materials	132733
Fu, Zhipeng / Song, Qiao / Wang, Xianfeng / Liu, Yuhong / Fang, Yuan / Xing, Feng	Repeatable self-healing with carbon sequestration function using ammonium bicarbonate	132916
Yu, Huanan / Dai, Wan / Qian, Guoping / Zhang, Chao / Ge, Jinguo / Xie, Tangxin	Research on microscopic contact characteristics of aggregates during compaction of asphalt mixtures	132678
Aivazyan, Ashot P. / Monteiro, Paulo J. M. / Kirchheim, Ana Paula / Prinz, Sebastian / Mkrtchyan, Vahram P. / Harutyunyan, Valeri S.	Residual stress on ettringite crystals in mature Type K shrinkage-compensating cement pastes	132892
Liu, Ziming / Sun, Lijun	A review of effect of compaction methods on cold recycling asphalt mixtures	132758
Fu, Yong / Qiao, Hongxia / Feng, Qiong / Chen, Kefan / Li, YanQi / Xue, Cuizhen / Zhang, Yunsheng	Review of new methods for resource utilisation of electrolytic manganese residue and its application in building materials	132901
Gutiérrez-Blandón, C. / Cuadri, A. A. / Tenorio-Alfonso, A. / Partal, P. / Navarro, F. J.	Rheological and phase behaviour of paraffin wax/bitumen blends with thermal storage characteristics	132826
Zhang, Xiuzhi / Hou, Jie / Sun, Hailong / Zhang, Chong / Huang, Jingli / Wang, Jinbang / Hou, Pengkun	Rheological property and stability of nano-silica modified self-compacting concrete with manufactured sand	132935
Xu, Q. Q. / Liu, Y. / Lin, J. Z. / Sun, X. D.	Seismic response of high-speed railway system under actions of ground motions from deterministic physics-based simulation	132775
Doostkami, Hesam / de Jesús Estacio Cumberbatch, Javier / Formagini, Sidiclei / Serna, Pedro / Roig-Flores, Marta	Self-healing capability of conventional, high-performance, and Ultra High-Performance Concrete with commercial bacteria characterized by means of water and chloride penetration	132903
Zhou, Xueyan / Zhu, Man / Ma, Biao / Li, Ning / Wang, Xiaoqing	Shape optimization of thermal shape memory epoxy resin and its mechanism for improving the self-healing of asphalt mixtures	132863
Dash, Bimalendu / Giri, Jyoti Prakash / Raju, P. Markandeya / Dora, D. T. K.	Simultaneous influence of processed cellulose acetate fiber reinforcement and recycled aggregate replacement on mechanical and durability performances of concrete	132950
Sui, Hao / Wang, Wei / Lin, Junlin / Qing Tang, Zhao / Yang, Der-Shen / Duan, Wenhui	Spatial correlation and pore morphology analysis of limestone calcined clay cement (LC3) via machine learning and image-based characterisation	132721
Pushp, Mohit / Chaudhari, Ojas Arun / Vikegard, Peter / Blomqvist, Per / Lönnermark, Anders / Nejad Ghafar, Ali / Hedenqvist, Mikael	Specific heat and excess heat capacity of grout with phase change materials using heat conduction microcalorimetry	132915
Hou, Dongshuai / Wang, Meng / Sun, Huiwen / Wang, Pan / Zhang, Jun / Wang, Muhan	Structural deterioration of calcium aluminosilicate hydrate by sulfate attack: Atomic processes of Al-Si chain breaking	132867
Du, Xiaobo / Liu, Shaohui / Lin, Hongwei / Xu, Xiuchen / Zheng, Zhixian / Zhang, Hongchao	Study on preparation technology and performance of polyethylene plastic concrete for road	132917
Huang, Xuewei / Yuan, Yilin / Ruan, Xiaohui / Zhang, Xiangcheng / Wei, Chenchen / Zhao, Jun	Study on ultra low cycle fatigue fracture behavior of Q690D high-strength steel after fire exposure	132668
Wang, Kai / Bai, Taoshuo / Xu, Jingmang / Ma, Qiantao / Wang, Ping / Chen, Rong / Qian, Yao / Li, Lu	Surface treatment of rail to enhance rolling contact fatigue and wear resistance: Combined spot laminar plasma quenching and tempering method	132832
Li, Zhihao / Zhou, Wei	Tensile behavior of UHPFRC made by a fiber orientation device with adjustable vibrational frequency	132914
Guo, Bingbing / Yu, Ruichang / Wang, Jing / Zhang, Zhidong / Wang, Yan / Niu, Ditao	Three-fold benefits of using CO2 to cure seawater sea sand concrete	132868
Abdoli, Mahshid / Mostofinejad, Davood	Torsional behavior of FRP-strengthened reinforced concrete members considering various wrapping configurations: Theoretical analysis and modeling	132636
Ting, Matthew Zhi Yeon / Li, Wentao / Yi, Yaolin	Two-phase changes in workability of sand-bentonite mixture triggered by seawater and binder during seepage cut-off wall construction in marine environment	132900
Xiao, Xi / Ho, Dion S. W. / Yang, En-Hua	The use of low alkalinity MgO-SiO2 formulation to encapsulate bacteria for self-healing concrete	132908

About this
data sheet
IssueID
70423
Published on:
02/09/2023
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.