Construction and Building Materials - January 2021

Published:	January 2021

Articles in this Issue

Author(s)	Title	Page(s)
Paixão, André / Fortunato, Eduardo	Abrasion evolution of steel furnace slag aggregate for railway ballast: 3D morphology analysis of scanned particles by close-range photogrammetry	121225
Cavusoglu, Ibrahim / Yilmaz, Erol / Yilmaz, Ali Osman	Additivity effect on properties of cemented coal fly ash backfill containing water-reducing admixtures	121021
Carette, Jérôme / Delsaute, Brice / Milenković, Nenad / Lecomte, Jean-Paul / Delplancke, Marie-Paule / Staquet, Stéphanie	Advanced characterisation of the early age behaviour of bulk hydrophobic mortars	120904
Shariati, Mahdi / Shariati, Ali / Trung, Nguyen Thoi / Shoaei, Parham / Ameri, Farshad / Bahrami, Nasrollah / Narimani zamanabadi, Saeid	Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics	120886
Meek, Alexandra H. / Elchalakani, Mohamed / Beckett, Christopher T. S. / Grant, Timothy	Alternative stabilised rammed earth materials incorporating recycled waste and industrial by-products: Life cycle assessment	120997
Shao, Linlong / Wang, Hainian / Zhang, Ran / Zheng, Wenhua / Hossiney, Nabil / Wu, Chunying	Analysis of the chemical properties and high-temperature rheological properties of MDI modified bio-asphalt	121044
Soltangharaei, V. / Anay, R. / Assi, L. / Bayat, M. / Rose, J. R. / Ziehl, P.	Analyzing acoustic emission data to identify cracking modes in cement paste using an artificial neural network	121047
Antico, F. C. / Rojas, P. / Briones, F. / Araya-Letelier, G.	Animal fibers as water reservoirs for internal curing of mortars and their limits caused by fiber clustering	120918
Hansen, Søren Gustenhoff / Cao Hoang, Linh	Anisotropic Compressive Behaviour of Concrete from Slabs Damaged by Alkali-Silica Reaction	120377
Ding, Haibo / Hesp, Simon A. M.	Another look at the use of modulated differential scanning calorimetry to study thermoreversible aging phenomena in asphalt binders	121787
Ahmed, Imtiaz / Thom, Nick / Bilal Ahmed Zaidi, Syed / Carvajal-Munoz, Juan S. / Rahman, Taqia / Dawson, Andrew	Application of a novel linear-viscous approach to predict permanent deformation in simulative inverted pavements	120681
Wang, Wentao / Zhao, Kaiyue / Zhang, Peng / Bao, Jiuwen / Xue, Shanbin	Application of three self-developed ECT sensors for monitoring the moisture content in sand and mortar	121008
Wang, Zhao / Hajirasouliha, Iman / Guadagnini, Maurizio / Pilakoutas, Kypros	Axial behaviour of FRP-confined rubberised concrete: An experimental investigation	121023
Xiao, Xi / Goh, Li Xuan / Unluer, Cise / Yang, En-Hua	Bacteria-induced internal carbonation of reactive magnesia cement	121748
Godat, Ahmed / Aldaweela, Shaima / Aljaberi, Hamda / Al Tamimi, Noura / Alghafri, Ebtesam	Bond strength of FRP bars in recycled-aggregate concrete	120919
Negrão, João / Martins, João	Bondline strength of glued-in threaded rods in new and ancient chestnut (Castanea sativa Mill.) wood	120989
Liu, Cheng / Liu, Guihua	Characterization of pore structure parameters of foam concrete by 3D reconstruction and image analysis	120958
Yang, Deqiang / Yan, Changwang / Zhang, Ju / Liu, Shuguang / Li, Jie	Chloride threshold value and initial corrosion time of steel bars in concrete exposed to saline soil environments	120979
Liu, Min / Hong, Shuxian / Wang, Yanshuai / Zhang, Jinrui / Hou, Dongshuai / Dong, Biqin	Compositions and microstructures of hardened cement paste with carbonation curing and further water curing	121724
Rodrigues, Eduardo A. / Gimenes, Marcela / Bitencourt Jr., Luís A. G. / Manzoli, Osvaldo L.	A concurrent multiscale approach for modeling recycled aggregate concrete	121040
Walubita, Lubinda F. / Fuentes, Luis / Lee, Sang I. / Guerrero, Oswaldo / Mahmoud, Enad / Naik, Bhaven / Simate, Geoffrey S.	Correlations and preliminary validation of the laboratory monotonic overlay test (OT) data to reflective cracking performance of in-service field highway sections	121029
Chen, Lijie / Su, Ray Kai Leung	Corrosion rate measurement by using polarization resistance method for microcell and macrocell corrosion: Theoretical analysis and experimental work with simulated concrete pore solution	121003
Guo, Jun-Yuan / Wang, Jun-Yan / Bian, Chen	Cyclic tensile behavior of high strain hardening UHPC analyzed by acoustic emission techniques	121797
Bian, Chen / Wang, Jun-Yan / Guo, Jun-Yuan	Damage mechanism of ultra-high performance fibre reinforced concrete at different stages of direct tensile test based on acoustic emission analysis	120927
Majidifard, Hamed / Jahangiri, Behnam / Rath, Punyaslok / Urra Contreras, Loreto / Buttlar, William G. / Alavi, Amir H.	Developing a prediction model for rutting depth of asphalt mixtures using gene expression programming	120543
de Sousa, Christoph / Barros, Joaquim A. O. / Ramôa Correia, Joao / Valente, Tiago D. S.	Development of sandwich panels for multi-functional strengthening of RC buildings: Characterization of constituent materials and shear interaction of panel assemblies	120849
O'Hegarty, Richard / Kinnane, Oliver / Grimes, Michael / Newell, John / Clifford, Michael / West, Roger	Development of thin precast concrete sandwich panels: Challenges and outcomes	120981
Gholampour, Aliakbar / Zheng, Junai / Ozbakkaloglu, Togay	Development of waste-based concretes containing foundry sand, recycled fine aggregate, ground granulated blast furnace slag and fly ash	121004
Huseien, Ghasan Fahim / Hussein Joudah, Zahraa / Khalid, Nur Hafizah A. / Sam, Abdul Rahman Mohd / Tahir, Mahmood Md. / Lim, Nor Hasanah Abdul Shukor / Alyousef, Rayed / Mirza, Jahangir	Durability performance of modified concrete incorporating fly ash and effective microorganism	120947
Kommidi, Santosh Reddy / Kim, Yong-Rak	Dynamic shear rheometer testing and mechanistic conversion to predict bending beam rheometer low temperature behavior of bituminous binder	120563
Olawuyi, Babatunde J. / Babafemi, Adewumi J. / Boshoff, William P.	Early-age and long-term strength development of high-performance concrete with SAP	121798
Gong, Wei / Wang, Nan / Zhang, Na	Effect of fly ash and metakaolin on the macroscopic and microscopic characterizations of magnesium oxychloride cement	120957
Zarrabi, Navid / Moghim, Mohammad Navid / Eftekhar, Mohammad Reza	Effect of hydraulic parameters on abrasion erosion of fiber reinforced concrete in hydraulic structures	120966
Ghorbani, Saeid / Mohammadi-Khatami, Mohammad / Ghorbani, Sahar / Elmi, Amir / Farzan, Minoo / Soleimani, Vala / Negahban, Mohammadamin / Tam, Vivian W. Y. / Tavakkolizadeh, Mohammadreza	Effect of magnetized water on the fresh, hardened and durability properties of mortar mixes with marble waste dust as partial replacement of cement	121049
Valikhani, Alireza / Jahromi, Azadeh Jaberi / Mantawy, Islam M. / Azizinamini, Atorod	Effect of mechanical connectors on interface shear strength between concrete substrates and UHPC: Experimental and numerical studies and proposed design equation	120587
Zhu, Jiang / Shu, Xin / Tang, Jinhui / Li, Tian / Ran, Qianping / Liu, Jiaping	Effect of microfines from manufactured sand on yield stress of cement paste	120987
Xiong, Yuanliang / Zhu, Yu / Chen, Chun / Zhang, Yamei	Effect of nano-alumina modified foaming agents on properties of foamed concrete	121045
Hu, Jie / Zhu, Yangyang / Hang, Jinzhen / Zhang, Zhangmin / Ma, Yuwei / Huang, Haoliang / Yu, Qijun / Wei, Jiangxiong	The effect of organic core–shell corrosion inhibitors on corrosion performance of the reinforcement in simulated concrete pore solution	121011
Gwon, Seongwoo / Choi, Young Cheol / Shin, Myoungsu	Effect of plant cellulose microfibers on hydration of cement composites	121734
Liu, Chuanbei / Gao, Jianming / Chen, Xuemei / Zhao, Yasong	Effect of polysaccharides on setting and rheological behavior of gypsum-based materials	120922
Xu, Wenbin / Chen, Wei / Tian, Mingming / Guo, Lijie	Effect of temperature on time-dependent rheological and compressive strength of fresh cemented paste backfill containing flocculants	121038
Tan, Hongbo / Li, Maogao / He, Xingyang / Su, Ying / Yang, Jin / Zhao, Huang	Effect of wet grinded lithium slag on compressive strength and hydration of sulphoaluminate cement system	120465
Fardin Rosa, André / Sacramento Aragão, Francisco Thiago / Motta, Laura Maria Goretti da	Effects of particle size distribution and lithology on the resistance to breakage of ballast materials	121015
Zhang, Yi / Jiang, Zhengwu / Zhu, Yanmei / Zhang, Jie / Ren, Qiang / Huang, Tao	Effects of redispersible polymer powders on the structural build-up of 3D printing cement paste with and without hydroxypropyl methylcellulose	120551
Ceroni, Francesca / Darban, Hossein / Caterino, Nicola / Luciano, Raimondo	Efficiency of injected anchors in masonry elements: Evaluation of pull-out strength	121707
Khalaf, Mohammed A. / Ban Cheah, Chee / Ramli, Mahyuddin / Ahmed, Naser M. / Al-Asady, Ahmed Mohammed Abid / Ali, Amal Mohamed Ahmed / Al-Shwaiter, Abdullah / Tangchirapat, Weerachart	Engineering and gamma-ray attenuation properties of steel furnace slag heavyweight concrete with nano calcium carbonate and silica	120878
Wang, Wenzhao / Zhao, Weiquan / Zhang, Jinjie / Zhou, Jianhua	Epoxy-based grouting materials with super-low viscosities and improved toughness	121104
Wang, Ming / Xing, Chengwei	Evaluation of microstructural features of Buton rock asphalt components and rheological properties of pure natural asphalt modified asphalt	121132
Wang, Tiao / Ishida, Tetsuya / Gu, Rui / Luan, Yao	Experimental investigation of pozzolanic reaction and curing temperature-dependence of low-calcium fly ash in cement system and Ca-Si-Al element distribution of fly ash-blended cement paste	121012
Huang, Baofeng / Lu, Wensheng	Experimental investigation of the uniaxial compressive behavior of thin building granite	120967
Liu, Sai / Wang, Xuan / Rawat, Prashant / Chen, Zheng / Shi, Caijun / Zhu, Deju	Experimental study and analytical modeling on tensile performance of basalt textile reinforced concrete	120972
Zhou, Lingzhu / Zheng, Yu / Yu, Yong / Song, Gangbing / Huo, Linsheng / Guo, Yongchang	Experimental study of mechanical and fresh properties of HVFA-SCC with and without PP fibers	121010
Kim, Il Sun / Choi, So Yeong / Choi, Yoon Suk / Yang, Eun Ik	An experimental study on absorptivity measurement of superabsorbent polymers (SAP) and effect of SAP on freeze-thaw resistance in mortar specimen	120974
Liang, Xiangzhou / Ji, Yongsheng	Experimental study on durability of red mud-blast furnace slag geopolymer mortar	120942
Feng, Ran / Huang, Zhipeng / Chen, Zhenming / Roy, Krishanu / Chen, Boshan / Lim, James B. P.	Experimental study on material properties and stress concentration factors of stainless-steel hybrid tubular joints	121103
Wang, Shengnian / Xue, Qinpei / Zhu, Yin / Li, Guoyu / Wu, Zhijian / Zhao, Kai	Experimental study on material ratio and strength performance of geopolymer-improved soil	120469
Hou, Dongshuai / Zhang, Wei / Ge, Zhi / Wang, Pan / Wang, Xinpeng / Zhang, Hongzhi	Experimentally validated peridynamic fracture modelling of mortar at the meso-scale	120939
Akbar, Arslan / Liew, K. M. / Farooq, Furqan / Khushnood, Rao Arsalan	Exploring mechanical performance of hybrid MWCNT and GNMP reinforced cementitious composites	120721
Yang, Li / Shi, Caijun / Liu, Jianhui / Wu, Zemei	Factors affecting the effectiveness of internal curing: A review	121017
Li, Shucai / Zhang, Jian / Li, Zhaofeng / Gao, Yifan / Liu, Chao	Feasibility study of red mud-blast furnace slag based geopolymeric grouting material: Effect of superplasticizers	120910
Lu, Jinhan / Jiang, Peng / Chen, Zhilin / Li, Luming / Huang, Yuxiang	Flame retardancy, thermal stability, and hygroscopicity of wood materials modified with melamine and amino trimethylene phosphonic acid	121042
Revathi, T. / Jeyalakshmi, R.	Fly ash–GGBS geopolymer in boron environment: A study on rheology and microstructure by ATR FT-IR and MAS NMR	120965
Zhang, Haijiang / Xu, Shanhua / Zhang, Zongxing / Nie, Biao / Wang, Liang	Fracture analysis of corroded cold-formed thin steel plates based on actual morphology using micromechanical models	120899
Wu, Di / Jin, Long / Leng, Yanqiu / Hu, Mengling / Bi, Ran / Tang, Liyun / Gao, Zhihua / Yang, Gengshe	A full-scale field experiment to study the hydrothermal behavior of the multilayer asphalt concrete pavement in cold regions	121855
Razzaghian Ghadikolaee, Mehrdad / Habibnejad korayem, Asghar / Sharif, Alireza / Liu, Yan Ming	The halloysite nanotube effects on workability, mechanical properties, permeability and microstructure of cementitious mortar	120873
Matias, Manuel / Almeida, Fernando / Moura, Rui / Barraca, Nuno	High resolution NDT in the characterization of the inner structure and materials of heritage buildings walls and columns	121726
Ba, Mingfang / Gao, Qi / Ma, Yanling / Zhu, Jiezhao / Du, Yingang	Improved hydration and properties of magnesium oxysulfate (MOS) cement using sodium silicate as an additive	120988
Jiang, Lei / Wang, Shengyue / Gu, Xingyu / Dorjee, Norbu / Bo, Wu	Inducing directional heat transfer by enhancing directional thermal conductivity of asphalt mixtures for improving asphalt solar collectors	121731
Bature, A. S. / Khorami, M. / Ganjian, E. / Tyrer, M.	Influence of alkali activator type and proportion on strength performance of calcined clay geopolymer mortar	120446
Wang, Ying / Zhang, Haitao	Influence of asphalt microstructure to its high and low temperature performance based on atomic force microscope (AFM)	120998
Karimipour, Arash / Ghalehnovi, Mansour	Influence of steel fibres on the mechanical and physical performance of self-compacting concrete manufactured with waste materials and fillers	121806
Li, Yue / Hao, Ji / Wang, Zigeng / Guan, Zhongzheng / Liu, Jianglin / Jin, Caiyun	Influence of ultra-high-rise pumping on microstructure and multi-scale mechanical properties of concrete based on X-ray CT and 3D mesoscopic numerical simulation	120980
Moro, Carlos / El Fil, Hala / Francioso, Vito / Velay-Lizancos, Mirian	Influence of water-to-binder ratio on the optimum percentage of nano-TiO2 addition in terms of compressive strength of mortars: A laboratory and virtual experimental study based on ANN model	120960
Ni, Tongyuan / Ma, Wenbin / Yang, Yang / Yu, Jingru / Liu, Jintao / Jiang, Chenhui / Gu, Chunping	Interface reinforcement and a new characterization method for pore structure of pervious concrete	121052
Olgun, Murat / Kanat, Askar / Senkaya, Alican / Erkan, İbrahim Hakkı	Investigating the properties of jet grouting columns with fine-grained cement and silica fume	120637
Wang, Sheng / Huang, Weidong	Investigation of aging behavior of terminal blend rubberized asphalt with SBS polymer	120870
Hooshmand, Ahmad / Kianoush, Reza / Siad, Hocine / Lachemi, Mohammed / Moslemi, Mehdi	Investigation of leakage and self-healing of direct tension cracks under sustained loading and high-water pressure	120879
Li, Shujun / Gao, Jianming / Li, Qiuyi / Zhao, Xiaolong	Investigation of using recycled powder from the preparation of recycled aggregate as a supplementary cementitious material	120976
Xue, Bin / Xu, Jing / Pei, Jianzhong / Zhang, Jiupeng / Li, Rui	Investigation on the micromechanical response of asphalt mixture during permanent deformation based on 3D virtual wheel tracking test	121031
Akinbade, Yusuf / Harries, Kent A.	Is the rule of mixture appropriate for assessing bamboo material properties?	120955
Zhao, Haitao / Liu, Hui / Wan, Yi / Ghantous, Rita Maria / Li, Jinghao / Liu, Ying / Ni, Yingfeng / Guan, Junfeng	Mechanical properties and autogenous deformation behavior of early-age concrete containing pre-wetted ceramsite and CaO-based expansive agent	120992
Yin, Lei / Yang, Xiaolong / Shen, Aiqin / Wu, Hansong / Lyu, Zhenfeng / Li, Bo	Mechanical properties and reaction mechanism of microwave-activated crumb rubber-modified asphalt before and after thermal aging	120773
Mühlich, Uwe / Pipintakos, Georgios / Tsakalidis, Christos	Mechanism based diffusion-reaction modelling for predicting the influence of SARA composition and ageing stage on spurt completion time and diffusivity in bitumen	120592
Thavathurairaja, (Jey) Jeyakaran / Hand, Adam J. / Piratheepan, Murugaiyah / Sebaaly, Peter E. / Hajj, Elie Y.	Method to estimate design resilient modulus (Mr) of unbound materials for rehabilitation in M−E design	120887
Lei, Dong-Yi / Guo, Li-Ping / Li, Ying / Liu, Jia-ping / Chen, Bo / Li, Dong-xu / Li, Shao-Chun / Mechtcherine, Viktor	Micro-mechanical model for ultra-high strength and ultra-high ductility cementitious composites (UHS-UHDCC)	120668
Jalilifar, Hasan / Sajedi, Fathollah	Micro-structural analysis of recycled concretes made with recycled coarse concrete aggregates	121041
Xu, Jing / Sun, Lijun / Pei, Jianzhong / Xue, Bin / Liu, Tao / Li, Rui	Microstructural, chemical and rheological evaluation on oxidative aging effect of SBS polymer modified asphalt	121028
Lee, Jaehyun / Lee, Taegyu / Jeong, Jaewook / Jeong, Jaemin	Mix design optimization and environmental impact assessment of low-carbon materials containing alkali-activated slag and high CaO fly ash	120932
Cantisani, Emma / Calandra, Sara / Barone, Serena / Caciagli, Samuele / Fedi, Mariaelena / Garzonio, Carlo Alberto / Liccioli, Lucia / Salvadori, Barbara / Salvatici, Teresa / Vettori, Silvia	The mortars of Giotto’s Bell Tower (Florence, Italy): raw materials and technologies	120801
Rahman, Sherin Khadeeja / Al-Ameri, Riyadh	A newly developed self-compacting geopolymer concrete under ambient condition	121822
Xu, Ying / Wang, Qingyuan / Jiang, Xuelei / Zu, Hongguang / Wang, Wei / Feng, Ran	Nondestructive assessment of microcracks detection in cementitious materials based on nonlinear ultrasonic modulation technique	121653
Ozersky, Alexander / Khomyakov, Alexander / Peterson, Karl	Novel ultra high performance concrete mixing technology with preliminary dry forced packing	120934
Cheng, Xin / Xia, Jin / Wang, Wei-li / Jin, Shi-jie / Huang, Nan / Jin, Wei-liang	Numerical modeling of the effect of concrete porosity evolution on electrochemical chloride removal from concrete structures	120929
Feng, Junjie / Yin, Guansheng / Tuo, Hongliang / Niu, Zhiqiang	Parameter optimization and regression analysis for multi-index of hybrid fiber-reinforced recycled coarse aggregate concrete using orthogonal experimental design	121013
Chandru, P. / Karthikeyan, J. / Sahu, Amit Kumar / Sharma, Ketan / Natarajan, C.	Performance evaluation between ternary blended SCC mixes containing induction furnace slag and crushed stone as coarse aggregate	120953
Wang, Zhenjun / Xu, Xu / Wang, XiaoFeng / Jinyang, Huo / Guo, Haoyan / Yang, Bo	Performance of modified asphalt of rubber powder through tetraethyl orthosilicate (TEOS)	121032
Sandoval, Oscar Javier / Takeuchi, Caori / Carrillo, Julian / Barahona, Bryan	Performance of unreinforced masonry panels strengthened with mortar overlays reinforced with welded wire mesh and transverse connectors	121054
Bucher, Raphaël / Cyr, Martin / Escadeillas, Gilles	Performance-based evaluation of flash-metakaolin as cement replacement in marine structures – Case of chloride migration and corrosion	120926
Dehghani, Ayoub / Aslani, Farhad	Piezoresistive sensing of cementitious composites reinforced with shape memory alloy, steel, and carbon fibres	121046
Hodul, Jakub / Mészárosová, Lenka / Drochytka, Rostislav / Struhárová, Alena	Polymer repair products containing fly ash contaminated by denitrification process	120641
Peng, Yanzhou / Liu, Yujiao / Zhan, Binhe / Xu, Gang	Preparation of autoclaved aerated concrete by using graphite tailings as an alternative silica source	121792
Zhou, Xueyan / Ma, Biao / Wei, Kun / Wang, Xiaoqing	Preparation of shape memory epoxy resin for asphalt mixtures and its influences on the main pavement performance	121055
Chen, Wei / Wu, Zhou / Zhu, Zhihui / Chen, Weiyun / Wang, Weidong / Zeng, Zhiping	Pull out and pre-tightening force tests for plastic dowel of the railway sleeper considering the influence of installing torque and frost force	120948
Frýbort, Aleš / Štulířová, Jana / Zavřel, Tomáš / Gregerová, Miroslava / Všianský, Dalibor	Reactivity of slag in 15 years old self-compacting concrete	120914
Tran, T. T. / Pham, D. T. / Vu, M. N. / Truong, V. Q. / Ho, X. B. / Tran, N. L. / Nguyen-Sy, T. / To, Q. D.	Relation between water permeability and chloride diffusivity of concrete under compressive stress: Experimental investigation and mesoscale lattice modelling	121164
Yang, Enhui / Tang, Youzhi / Li, Li / Yan, Wei / Huang, Bing / Qiu, Yanjun	Research on the recurrent neural network-based fatigue damage model of asphalt binder and the finite element analysis development	121761
Nicolini, Adriana / Gonçalves Maciel, Vinícius / Andrade Neto, José da Silva / Roca Bragança, Saulo / Maldaner Jacobi, Marly	Rheological behavior of fresh latex polymeric mortar by squeeze-flow technique	121175
Amini, Amir / Ziari, Hassan / Saadatjoo, Seyed Amir / Hashemifar, Negar Sadat / Goli, Ahmad	Rutting resistance, fatigue properties and temperature susceptibility of nano clay modified asphalt rubber binder	120946
Farahani, Emadoddin Majdabadi / Yekrangnia, Mohammad / Rezaie, Masoud / Bento, Rita	Seismic behavior of masonry walls retrofitted by centercore technique: A numerical study	120382
Guzlena, S. / Sakale, G.	Self-healing of glass fibre reinforced concrete (GRC) and polymer glass fibre reinforced concrete (PGRC) using crystalline admixtures	120963
Zhou, Kaiyang / Lei, Dong / He, Jintao / Zhang, Pei / Bai, Pengxiang / Zhu, Feipeng	Single micro-damage identification and evaluation in concrete using digital image correlation technology and wavelet analysis	120951
Le, Trung-Tri / Park, Sung-Sik / Lee, Jun-Cheol / Lee, Dong-Eun	Strength characteristics of spent coffee grounds and oyster shells cemented with GGBS-based alkaline-activated materials	120986
Zhai, Kejie / Fang, Hongyuan / Guo, Chengchao / Ni, Pengpeng / Fu, Bing / Wang, Fuming / Zhang, Chao	Strengthening of PCCP with broken wires using prestressed CFRP	120903
Zhou, J. K. / Lin, Guan / Teng, J. G.	Stress-strain behavior of FRP-confined concrete containing recycled concrete lumps	120915
Gouda, Omar / Hassanein, Ahmed / Youssef, Tarik / Galal, Khaled	Stress-Strain Behaviour of Masonry Prisms Constructed with Glass Fibre-Reinforced Grout	120984
Zhang, Yang / Liu, Peng / Zhao, Xuefeng	Structural displacement monitoring based on mask regions with convolutional neural network	120923
Li, Jingjun / Zhao, Enjia / Niu, Jiangang / Wan, Chaojun	Study on mixture design method and mechanical properties of steel fiber reinforced self-compacting lightweight aggregate concrete	121019
Zhu, Zheyu / Wang, Zhongping / Zhou, Yue / Wei, Yongqi / She, Anming	Synthesis and structure of calcium silicate hydrate (C-S-H) modified by hydroxyl-terminated polydimethylsiloxane (PDMS)	120731
Torres-Rivas, Alba / Pozo, Carlos / Palumbo, Mariana / Ewertowska, Anna / Jiménez, Laureano / Boer, Dieter	Systematic combination of insulation biomaterials to enhance energy and environmental efficiency in buildings	120973
Bamonte, Patrick / Gambarova, Pietro G. / Sciarretta, Francesca	Thermo-mechanical properties and stress-strain curves of ordinary cementitious mortars at elevated temperatures	121027

About this
data sheet
IssueID
54863
Published on:
09/01/2021
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - January 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - January 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.