Construction and Building Materials - March 2021

Published:	March 2021

Articles in this Issue

Author(s)	Title	Page(s)
Cheng, Lu / Xin, Haohui / Groves, Roger M. / Veljković, Milan	Acoustic emission source location using Lamb wave propagation simulation and artificial neural network for I-shaped steel girder	121706
Feng, Zhengang / Cai, Fengjie / Yao, Dongdong / Li, Xinjun	Aging properties of ultraviolet absorber/SBS modified bitumen based on FTIR analysis	121713
Guo, Yuzhu / Chen, Xudong / Chen, Bo / Wen, Rongkun / Wu, Peng	Analysis of foamed concrete pore structure of railway roadbed based on X-ray computed tomography	121773
Xu, Yang / Yu, Wenying / Qie, Luchao / Wang, Hong / Ning, Na	Analysis of influence of ballast shape on abrasion resistance using discrete element method	121708
Jiang, Wei / Bao, Rui / Lu, Hao / Yuan, Dongdong / Lu, Rong / Sha, Aimin / Shan, Jinhuan	Analysis of rheological properties and aging mechanism of bitumen after short-term and long-term aging	121777
Mota-López, María Isabel / Maderuelo-Sanz, Rubén / Pastor-Valle, José David / Meneses-Rodríguez, Juan Miguel / Romero-Casado, Antonio	Analytical characterization of the almohad rammed-earth wall of Cáceres, Spain	121676
Su, Yilin / Zheng, Tianwen / Qian, Chunxiang	Application potential of Bacillus megaterium encapsulated by low alkaline sulphoaluminate cement in self-healing concrete	121740
Huang, Gang / He, Junxi / Zhang, Xia / Feng, Manman / Tan, Yan / Lv, Chuncheng / Huang, Hao / Jin, Zhao	Applications of Lambert-Beer law in the preparation and performance evaluation of graphene modified asphalt	121582
Gravina, Rebecca J. / Xie, Tianyu / Giustozzi, Filippo / Zhao, Xinyu / Visintin, Phillip	Assessment of the variability and uncertainty of using post-customer plastics as natural aggregate replacement in concrete	121747
He, Miao / Yu, Zhonghui / Ma, Shibin / Kang, Aizhong / Zhang, Jing	Autogenous self-healing properties of cement-stabilized macadam after microcracking	121737
Al-Khafaji, Ali F. / Myers, John J. / Wang, Wei	Bond assessment of two types of SRP strengthening systems subjected to severe conditions	121968
Zhou, Hao / Fernando, Dilum / Nguyen, Van Thuan / Dai, Jian-Guo	The bond behaviour of CFRP-to-concrete bonded joints under fatigue cyclic loading: An experimental study	121674
Gong, Fangyuan / Liu, Yu / You, Zhanping / Zhou, Xiaodong	Characterization and evaluation of morphological features for aggregate in asphalt mixture: A review	121989
Huang, Wentong / Guo, Yunfei / Zheng, Yu / Ding, Qile / Sun, Can / Yu, Jiangmiao / Zhu, Minye / Yu, Huayang	Chemical and rheological characteristics of rejuvenated bitumen with typical rejuvenators	121525
Geng, Jian / Pan, Chonggen / Wang, Yu / Chen, Wei / Zhu, Yueyuan	Chloride binding in cement paste with calcined Mg-Al-CO3 LDH (CLDH) under different conditions	121678
Jia, Yanshun / Wang, Shaoquan / Huang, Aqi / Gao, Ying / Wang, Jiashu / Zhou, Wei	A comparative long-term effectiveness assessment of preventive maintenance treatments under various environmental conditions	121717
Wei, Tangzhong / Zhao, Hu / Ma, Cong	A comparison of water curing and standard curing on one-part alkali-activated fly ash sinking beads and slag: Properties, microstructure and mechanisms	121715
Choi, Jeong-Il / Nguyễn, Huy Hoàng / Cha, Sang Lyul / Li, Mo / Lee, Bang Yeon	Composite properties of calcium-based alkali-activated slag composites reinforced by different types of polyethylene fibers and micromechanical analysis	121760
Gebremariam, Abraham T. / Vahidi, Ali / Di Maio, Francesco / Moreno-Juez, J. / Vegas-Ramiro, I. / Łagosz, Artur / Mróz, Radosław / Rem, Peter	Comprehensive study on the most sustainable concrete design made of recycled concrete, glass and mineral wool from C&D wastes	121697
Feng, Wanhui / Liu, Feng / Yang, Fei / Jing, Lin / Li, Lijuan / Li, Hongzhong / Chen, Lin	Compressive behaviour and fragment size distribution model for failure mode prediction of rubber concrete under impact loads	121767
Chen, Shunman / Wu, Aixiang / Wang, Yiming / Wang, Wei	Coupled effects of curing stress and curing temperature on mechanical and physical properties of cemented paste backfill	121746
Li, Lihua / Geng, Zhangshuai / Huang, Jie / Xiao, Henglin / Pei, Yaoyao / Liu, Yan	Creating in-situ polymeric layer based on photocuring for various construction applications	121732
Zhou, Bochao / Zhang, Jiupeng / Pei, Jianzhong / Li, Rui / Zhang, Zhidong	Design and evaluation of high–luminance porous asphalt mixtures based on wasted glass for sponge city	121696
Li, Shuwei / Gu, Xingyu / Xu, Xiangrong / Xu, Dawei / Zhang, Tianjie / Liu, Zhen / Dong, Qiao	Detection of concealed cracks from ground penetrating radar images based on deep learning algorithm	121949
Ren, Qiang / Ding, Luchuan / Dai, Xiaodi / Jiang, Zhengwu / Ye, Guang / De Schutter, Geert	Determination of specific surface area of irregular aggregate by random sectioning and its comparison with conventional methods	122019
Wang, Lining / Aslani, Farhad	Development of self-sensing cementitious composites incorporating CNF and hybrid CNF/CF	121659
Kumar, Dhanendra / Ranade, Ravi	Development of strain-hardening cementitious composites utilizing slag and calcium carbonate powder	122028
Pereira, Marcos Cesar de Moraes / Pascal Sohier, Luc Arthur / Descamps, Thierry / Calil Junior, Carlito	Doweled cross laminated timber: Experimental and analytical study	121820
Li, Zhixing / Chen, Wensu / Hao, Hong / Khan, Musaad Zaheer Nazir / Pham, Thong M.	Dynamic compressive properties of novel lightweight ambient-cured EPS geopolymer composite	122044
Hamza Hasnain, Muhammad / Javed, Usman / Ali, Ather / Zafar, Muhammad Saeed	Eco-friendly utilization of rice husk ash and bagasse ash blend as partial sand replacement in self-compacting concrete	121753
Dehghani, Ayoub / Aslani, Farhad	Effect of 3D, 4D, and 5D hooked-end type and loading rate on the pull-out performance of shape memory alloy fibres embedded in cementitious composites	121742
Kim, Yong-Hyok / Kim, Hak-Young / Yang, Keun-Hyeok / Ha, Jung-Soo	Effect of concrete unit weight on the mechanical properties of bottom ash aggregate concrete	121998
Zhou, Yongxiang / Zhang, Zengqi	Effect of fineness on the pozzolanic reaction kinetics of slag in composite binders: Experiment and modelling	121695
Xie, Lilan / Deng, Min / Tang, Jinhui / Liu, Kaiwei	The effect of fluorapatite in limestones on the mineral compositions of Portland cement clinkers	122042
Syed, Mazhar / GuhaRay, Anasua	Effect of natural fiber reinforcement on strength response of alkali activated binder treated expansive soil: Experimental investigation and reliability analysis	121743
Jochem, Lidiane Fernanda / Casagrande, Cézar Augusto / Onghero, Lucas / Venâncio, Caroline / Gleize, Philippe J. P.	Effect of partial replacement of the cement by glass waste on cementitious pastes	121704
Guan, Jianan / Liu, Xiao / Lai, Guanghong / Luo, Qifeng / Qian, Shanshan / Zhan, Jiayu / Wang, Ziming / Cui, Suping	Effect of sulfonation modification of polycarboxylate superplasticizer on tolerance enhancement in sulfate	122095
Zhou, Tao / Xie, Sainan / Kabir, Sk Faisal / Cao, Liping / Fini, Elham H.	Effect of Sulfur on Bio-Modified Rubberized Bitumen	122034
Gong, Yan / Xu, Jian / Chang, Rong / Yan, Er-hu	Effect of water diffusion and thermal coupling condition on SBS modified asphalts’ surface micro properties	121758
Yusoh, Alia Syahirah / Tahir, Paridah Md / Anwar Uyup, Mohd Khairun / Lee, Seng Hua / Husain, Hamdan / Khaidzir, Mohammad Omar	Effect of wood species, clamping pressure and glue spread rate on the bonding properties of cross-laminated timber (CLT) manufactured from tropical hardwoods	121721
Li, Yiming / Ding, Haibo / Nie, Yihua / Hesp, Simon A. M.	Effective control of flexible asphalt pavement cracking through quality assurance testing of extracted and recovered binders	121769
Borrie, D. / Al-Saadi, S. / Zhao, X. L. / Singh Raman, R. K. / Bai, Y.	Effects of CNT modified adhesives and silane chemical pre-treatment on CFRP/steel bond behaviour and durability	121803
Ding, Lining / Liu, Lulu / Wang, Xin / Shen, Haibin / Wu, Zhishen	Effects of connecting materials on the static and fatigue behavior of pultruded basalt fiber-reinforced polymer bolted joints	121683
Kumar, Amit / Chauhan, Vishal S. / Kumar, Rajeev / Prasad, Kamal	Electromagnetic radiation detection in cement-mortar/lead zirconate titanate composites using drop-weight impact technique	122022
Karimi, Mohammad M. / Jahanbakhsh, Hamid / Nejad, F. Moghadas	Energy-based approach to characterize induced heating of asphalt concrete under electromagnetic field	121762
Yang, Mao / Ju, Chenggong / Xue, Kairu / Peng, Yuzhou / Han, Hong / Wan, Qianqian / Peng, Xiao / Wu, Yan	Environmental-friendly non-sintered permeable bricks: Preparation from wrap-shell lightweight aggregates of dredged sediments and its performance	121751
Zhu, Junqing / Ma, Tao / Lin, Zihao / Xu, Jian / Qiu, Xiaohua	Evaluation of internal pore structure of porous asphalt concrete based on laboratory testing and discrete-element modeling	121754
Nematzadeh, Mahdi / Fallah-Valukolaee, Saber	Experimental and analytical investigation on structural behavior of two-layer fiber-reinforced concrete beams reinforced with steel and GFRP rebars	121933
Robalo, Keila / Costa, Hugo / do Carmo, Ricardo / Júlio, Eduardo	Experimental development of low cement content and recycled construction and demolition waste aggregates concrete	121680
Milani, Alisson Simonetti / Lübeck, André / Mohamad, Gihad / Santos Neto, Almir Barros da Silva / Budny, Jaelson	Experimental investigation of small-scale clay blocks masonry walls with chases under compression	121539
Tasalloti, Ali / Chiaro, Gabriele / Banasiak, Laura / Palermo, Alessandro	Experimental investigation of the mechanical behaviour of gravel-granulated tyre rubber mixtures	121749
Far, Harry / Nejadi, Shami	Experimental investigation on flexural behaviour of composite PVC encased macro-synthetic fibre reinforced concrete walls	121756
Ding, Yu / Zhang, Jiasheng / Chen, Xiaobin / Wang, Xuan / Jia, Yu	Experimental investigation on static and dynamic characteristics of granulated rubber-sand mixtures as a new railway subgrade filler	121955
Peng, Gang / Niu, Ditao / Hu, Xiaopeng / Pan, Baoxue / Zhong, Shuai	Experimental study of the interfacial bond strength between cementitious grout and normal concrete substrate	122057
Li, Xiaolong / Hao, Meimei / Zhong, Yanhui / Zhang, Bei / Wang, Fuming / Wang, Lianbang	Experimental study on the diffusion characteristics of polyurethane grout in a fracture	121711
Lai, Yongming / Yu, Jin / Liu, Shiyu / Liu, Jifeng / Wang, Runkai / Dong, Bowen	Experimental study to improve the mechanical properties of iron tailings sand by using MICP at low pH	121729
Cheng, Huailei / Liu, Jianing / Sun, Lijun / Liu, Liping / Zhang, Yining	Fatigue behaviours of asphalt mixture at different temperatures in four-point bending and indirect tensile fatigue tests	121675
Chen, Yong-Gui / Guan, Lei-lei / Zhu, Shen-yi / Chen, Wei-jia	Foamed concrete containing fly ash: Properties and application to backfilling	121685
Dong, Zheng / Torbati-Sarraf, Hamidreza / Hussein, Haitham Zeidan / Poursaee, Amir	Harmonic analysis on the effect of potential perturbations and electrodes arrangements on the electrochemical impedance (EIS) measurement of cementitious material	121701
Angelides, S. C. / Talbot, J. P. / Overend, M.	High strain-rate effects from blast loads on laminated glass: An experimental investigation of the post-fracture bending moment capacity based on time–temperature mapping of interlayer yield stress	121658
Ait Oumeziane, Yacine / Pierre, Alexandre / El Mankibi, Fatima / Lepiller, Valérie / Gasnier, Marina / Désévaux, Philippe	Hygrothermal properties of an early 20th century clay brick from eastern France: Experimental characterization and numerical modelling	121763
Zhao, Peng / Xu, Gang / Wang, Qing / Wen, Changcheng	Impact of sustained load on damage characteristics of reinforced concrete beams under the combined action of salt freeze-thaw cycles and corrosion	121744
Candamano, S. / Crea, F. / Coppola, L. / De Luca, P. / Coffetti, D.	Influence of acrylic latex and pre-treated hemp fibers on cement based mortar properties	121720
Xu, Wenlei / Chen, Bo / Chen, Xudong / Chen, Chen	Influence of aggregate size and notch depth ratio on fracture performance of steel slag pervious concrete	122036
Ghafoor, M. Talha / Khan, Qasim S. / Qazi, Asad U. / Sheikh, M. Neaz / Hadi, M. N. S.	Influence of alkaline activators on the mechanical properties of fly ash based geopolymer concrete cured at ambient temperature	121752
Cai, Rong / Yu, Miao / Hu, Yingshuang / Yang, Lufeng / Ma, Hongyan	Influence of data acquisition and processing on surface chloride concentration of marine concrete	121705
Juradin, Sandra / Boko, Ivica / Netinger Grubeša, Ivanka / Jozić, Dražan / Mrakovčić, Silvija	Influence of different treatment and amount of Spanish broom and hemp fibres on the mechanical properties of reinforced cement mortars	121702
Chen, Zihao / Zhang, Dongmei / Zhang, Yingchun / Zhang, Henglong / Zhang, Shuai	Influence of multi-dimensional nanomaterials composite form on thermal and ultraviolet oxidation aging resistances of SBS modified asphalt	122054
Wang, Xuan / Cheng, Hao / Yan, Peng / Zhang, Jiasheng / Ding, Yu	The influence of roughness on cyclic and post-cyclic shear behavior of red clay-concrete interface subjected to up to 1000 cycles	121718
Jia, Guanhua / Li, Zhu	Influence of the aerogel/expanded perlite composite as thermal insulation aggregate on the cement-based materials: Preparation, property, and microstructure	121728
Belc, Anda Ligia / Pop, Ion Octavian / Belc, Florin / Costescu, Ciprian / Fakhari Tehrani, Fateh	Influence of warm mix additives on the low-temperature behavior of bitumen using the Bending Beam Rheometer (BBR)	121682
Nana, Achile / Kaze, Rodrigue Cyriaque / Alomayri, Thamer Salman / Assaedi, Hasan Suliman / Nemaleu Deutou, Juvenal Giogetti / Ngouné, Jean / Tchakouté, Hervé Kouamo / Kamseu, Elie / Leonelli, Cristina	Innovative porous ceramic matrices from inorganic polymer composites (IPCs): Microstructure and mechanical properties	122032
Cottrell, Jack A. / Ali, Muhammad / Tatari, Alireza / Martinson, D. Brett	An investigation into the influence of geometry on compressed earth building blocks using finite element analysis	121997
Tanyildizi, Harun	Investigation of carbonation performance of polymer-phosphazene concrete using Taguchi optimization method	121673
Lv, Songtao / Hu, Long / Peng, Xinghai / Borges Cabrera, Milkos / Li, Jianglong	Investigation of structural resistance for semi-rigid layers in an actual stress state	122041
Yang, Zhihao / Yue, Zurun / Tai, Bowen	Investigation of the deformation and strength properties of fouled graded macadam materials in heavy-haul railway subgrade beds	121778
Jia, Meng / Sha, Aimin / Jiang, Wei / Wang, Wentong / Li, Jiange / Dai, Jiasheng / Lu, Zhen	Laboratory evaluation of poly(ethylene glycol) for cooling of asphalt pavements	121774
Shan, Jingsong / Feng, Shanshan / Li, Feng / Wu, Shuyin	Lateral permeability of pervious asphalt mixtures and the influence of clogging	121988
Jose, Alex / Kasthurba, A. K.	Laterite soil-cement blocks modified using natural rubber latex: Assessment of its properties and performance	121991
Rustamov, Sardorbek / Woo Kim, Sang / Kwon, Minho / Kim, Jinsup	Mechanical behavior of fiber-reinforced lightweight concrete subjected to repeated freezing and thawing	121710
Zhou, Lu / Huang, Weidong / Zhang, Yuan / Lv, Quan / Sun, Lijun	Mechanical evaluation and mechanism analysis of the stripping resistance and healing performance of modified asphalt-basalt aggregate combinations	121922
Zhao, Ying / Yang, Zhaohan / Yu, Tianlai / Xin, Dabo	Mechanical properties and energy absorption capabilities of aluminium foam sandwich structure subjected to low-velocity impact	121996
Zhang, Hai-Yan / Liu, Jian-Cheng / Wu, Bo	Mechanical properties and reaction mechanism of one-part geopolymer mortars	121973
Chen, Dingshi / Yang, Kangkang / Hu, Dalin / Shi, Jun	A meso-stochastic research on the chloride transport in unsaturated concrete	121986
Yu, Yong / Zheng, Yu / Xu, Jin-Jun / Wang, Xiao-Lu	Modeling and predicting the mechanical behavior of concrete under uniaxial loading	121694
Meng, Guowang / Wu, Bo / Xu, Shixiang / Huang, Jingsong	Modelling and experimental validation of flexural tensile properties of steel fiber reinforced concrete	121974
Ahmadi, Jamal / Feirahi, Mohammad Hamed / Farahmand-Tabar, Salar / Keshvari Fard, Amir Hossein	A novel approach for non-destructive EMI-based corrosion monitoring of concrete-embedded reinforcements using multi-orientation piezoelectric sensors	121689
Chen, Jing / Gao, Rui / Liu, Yangzepeng / Shi, Zhizheng / Zhang, Ronglong	Numerical exploration of the behavior of coal-fouled ballast subjected to direct shear test	121927
Dingqiang, Fan / Yu, Rui / Kangning, Liu / Junhui, Tan / Zhonghe, Shui / Chunfeng, Wu / Shuo, Wang / Zhenfeng, Guan / Zhengdong, Hu / Qiqi, Su	Optimized design of steel fibres reinforced ultra-high performance concrete (UHPC) composites: Towards to dense structure and efficient fibre application	121698
Li, Huanyu / Liebscher, Marco / Michel, Albert / Quade, Antje / Foest, Rüdiger / Mechtcherine, Viktor	Oxygen plasma modification of carbon fiber rovings for enhanced interaction toward mineral-based impregnation materials and concrete matrices	121950
Ige, Olubisi / Danso, Humphrey	Physico-mechanical and thermal gravimetric analysis of adobe masonry units reinforced with plantain pseudo-stem fibres for sustainable construction	121686
Dehghani, Ayoub / Aslani, Farhad	Piezoelectric behaviour of hybrid engineered cementitious composites containing shape-memory alloy, steel, and carbon fibres under compressive stress cycles	121671
Wu, Mingyang / Wang, Wensong / Zhang, Dongming / Deng, Bozhi / Liu, Shumin / Lu, Jun / Luo, Yafei / Zhao, Wanchun	The pixel crack reconstruction method: From fracture image to crack geological model for fracture evolution simulation	121733
Ding, Mengxi / Yu, Rui / Feng, Yuan / Wang, Siyu / Zhou, Fengjiao / Shui, Zhonghe / Gao, Xu / He, Yongjia / Chen, Luyi	Possibility and advantages of producing an ultra-high performance concrete (UHPC) with ultra-low cement content	122023
Jittin, V. / Minnu, S. N. / Bahurudeen, A.	Potential of sugarcane bagasse ash as supplementary cementitious material and comparison with currently used rice husk ash	121679
Tian, Zhongnan / Liu, Xin / Zhang, Zhengqi / Zhang, Kaiwen / Tang, Xiuming	Potential using of water-soluble polymer latex modified greener road geopolymeric grouts: Its preparation, characterization and mechanism	121757
Zhu, Lihua / Zhao, Cheng / Dai, Jun	Prediction of compressive strength of recycled aggregate concrete based on gray correlation analysis	121750
Nematzadeh, Mahdi / Tayebi, Morteza / Samadvand, Hojjat	Prediction of ultrasonic pulse velocity in steel fiber-reinforced concrete containing nylon granule and natural zeolite after exposure to elevated temperatures	121958
Zhao, Pinhui / Ren, Ruibo / Zhou, Hao / Ouyang, Jian / Li, Zhigang / Sun, DaChuan	Preparation and properties of imidazoline surfactant as additive for warm mix asphalt	121692
Zou, Shuai / Xiao, Jianzhuang / Ding, Tao / Duan, Zhenhua / Zhang, Qingtian	Printability and advantages of 3D printing mortar with 100% recycled sand	121699
Luo, Qi / Wang, Yanshuai / Hong, Shuxian / Xing, Feng / Dong, Biqin	Properties and microstructure of lithium-slag-based geopolymer by one-part mixing method	121723
Jin, Song / Zhou, Jikai / Zhao, Xiyao / Sun, Lu	Quantitative relationship between pore size distribution and compressive strength of cementitious materials	121727
Zhang, Pengyuan / Wang, Yuanfeng / Liu, Baodong / Guo, Kun / Xiao, Jianzhuang	Rate-dependent damping properties of recycled aggregate concrete from creep perspective	121691
Kuai, Chenchen / Chen, Jun / Shi, Xijun / Grasley, Zachary	Regulating porous asphalt concrete temperature using PEG/SiO2 phase change composite: Experiment and simulation	122043
Toska, Klajdi / Faleschini, Flora / Zanini, Mariano Angelo / Hofer, Lorenzo / Pellegrino, Carlo	Repair of severely damaged RC columns through FRCM composites	121739
Muthu, Murugan / Yang, En-Hua / Unluer, Cise	Resistance of graphene oxide-modified cement pastes to hydrochloric acid attack	121990
Hou, Shaodan / Duan, Zhenhua / Xiao, Jianzhuang / Ye, Jun	A review of 3D printed concrete: Performance requirements, testing measurements and mix design	121745
Xie, Chaopeng / Cao, Mingli / Khan, Mehran / Yin, Hong / Guan, Junfeng	Review on different testing methods and factors affecting fracture properties of fiber reinforced cementitious composites	121766
Yu, Xiaoniu / Jiang, Jianguo / Liu, Jiwei / Li, Wei	Review on potential uses, cementing process, mechanism and syntheses of phosphate cementitious materials by the microbial mineralization method	121113
Alghrafy, Yasser M. / Abd Alla, El-Sayed M. / El-Badawy, Sherif M.	Rheological properties and aging performance of sulfur extended asphalt modified with recycled polyethylene waste	121771
Pachta, Vasiliki / Tsardaka, Eirini-Chrysanthi / Stefanidou, Maria	The role of flame retardants in cement mortars exposed at elevated temperatures	122029
Khiavi, Alireza Khavandi / Ghanbari, Ali / Rasouli, Ramin	Self-healing and fatigue performance of poly 2-hydroxyethyl methacrylate modified bitumen	121688
Li, Shengli / Wu, Yanqi / Li, Wenxia / Li, Panjie	Shear test on damage evolution of brick masonry based on acoustic emission technique	121782
Vieira, Castorina Silva / Pereira, Paulo M.	Short-term tensile behaviour of three geosynthetics after exposure to Recycled Construction and Demolition materials	122031
Li, Xiaowei / Zhu, Yunsheng / Su, Tiansheng / Wang, Xianrong / Zhang, Xiedong	Study on performance improvement of new geocell reinforced asphalt mixture	121693
He, Haiqi / Hu, Jiulong / Li, Rui / Shen, Chenchen / Pei, Jianzhong / Zhou, Bochao	Study on rheological properties of silica nanofluids modified asphalt binder	122046
Wan, Yu / Zhu, Zhiduo / Song, Lei / Song, Shigong / Zhang, Jun / Gu, Xiaobin / Xu, Xiaoyu	Study on temporary filling material of synchronous grouting in the middle of shield	121681
Chen, Zhangyan / Zhou, Yun / Zhong, Genquan / Lu, Yi / Shi, Fei	Study on the cyclic shear behavior of damping layer joint for the infilled masonry wall	121772
Hou, Jifeng / Guo, Zhongping / Li, Jinbo / Zhao, Lijuan	Study on triaxial creep test and theoretical model of cemented gangue-fly ash backfill under seepage-stress coupling	121722
Ren, Miao / Wen, Xiaodong / Gao, Xiaojian / Liu, Yushi	Thermal and mechanical properties of ultra-high performance concrete incorporated with microencapsulated phase change material	121714
Ali-Boucetta, Tahar / Ayat, Amira / Laifa, Walid / Behim, Mourad	Treatment of date palm fibres mesh: Influence on the rheological and mechanical properties of fibre-cement composites	121056
Yang, Kai / Li, Rui / Yu, Yi / Pei, Jianzhong	Unified laboratorial evaluation of interlayer bond property in asphalt pavements based on strength parameters	121738
Rodríguez-Álvaro, Roberto / Seara-Paz, Sindy / González-Fonteboa, Belén / Martínez-Abella, Fernando	Use of granular coal combustion products as aggregates in structural concrete: Effects on properties and recommendations regarding mix design	121690
Burbano-Garcia, Claudia / Hurtado, Ana / Silva, Yimmy Fernando / Delvasto, Silvio / Araya-Letelier, Gerardo	Utilization of waste engine oil for expanded clay aggregate production and assessment of its influence on lightweight concrete properties	121677
Zhang, Kevin / Richman, Russell	Wood sheathing durability from moisture sorption isotherm variability due to age and temperature	121672

About this
data sheet
IssueID
54856
Published on:
09/01/2021
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - March 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - March 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.