Construction and Building Materials - December 2019

Published:	December 2019

Articles in this Issue

Author(s)	Title	Page(s)
Soltanzadeh, Fatemeh / Cunha, Vítor M. C. F. / Barros, Joaquim A. O.	Assessment of different methods for characterization and simulation of post-cracking behavior of self-compacting steel fiber reinforced concrete	116704
Karim, Rizwan / Najimi, Meysam / Shafei, Behrouz	Assessment of transport properties, volume stability, and frost resistance of non-proprietary ultra-high performance concrete	117031
Ali, Yasir / Irfan, Muhammad / Buller, Abdul Salam / Khan, Hammad A. / Gul, Hafiz M. F.	A binary logistic model for predicting the tertiary stage of permanent deformation of conventional asphalt concrete mixtures	116608
Wei, Wei / Liu, Feng / Xiong, Zhe / Lu, Zhongyu / Li, Lijuan	Bond performance between fibre-reinforced polymer bars and concrete under pull-out tests	116803
Basili, Michela / Vestroni, Fabrizio / Marcari, Giancarlo	Brick masonry panels strengthened with textile reinforced mortar: experimentation and numerical analysis	117061
Anghelescu, Lucica / Cruceru, Mihai / Diaconu, Bogdan	Building materials obtained by recycling coal ash and waste drilling fluid and characterization of engineering properties by means of Artificial Neural Networks	116616
Hover, Kenneth C.	Case studies of non-destructive test results and core strengths at age of 3-days	116672
Fu, Zongying / Zhou, Yongdong / Gao, Xin / Liu, Honghai / Zhou, Fan	Changes of water related properties in radiata pine wood due to heat treatment	116692
Sun, Tao / Ge, Keyu / Wang, Guiming / Geng, Haining / Shui, Zhonghe / Cheng, Shukai / Chen, Meng	Comparing pozzolanic activity from thermal-activated water-washed and coal-series kaolin in Portland cement mortar	117092
Li, Hongmin / Lam, Frank / Qiu, Hongxing	Comparison of glulam beam-to-beam connections with round dovetail and half-lap joints reinforced with self-tapping screws	116437
Hettiarachchi, Chamod / Hou, Xiangdao / Wang, Jiayu / Xiao, Feipeng	A comprehensive review on the utilization of reclaimed asphalt material with warm mix asphalt technology	117096
Pelà, Luca / Saloustros, Savvas / Roca, Pere	Cylindrical samples of brick masonry with aerial lime mortar under compression: Experimental and numerical study	116782
Lehmann, F. / Chataigner, S. / Birtel, V. / Wang, J. / Konrad, O.	Development of a sensor for monitoring mechanically stressed adhesive joints	116627
Doner, Sami / Nayak, Sumeru / Senol, Koray / Shukla, Arun / Krishnan, N. M. Anoop / Yilmazcoban, Ibrahim Kutay / Das, Sumanta	Dynamic compressive behavior of metallic particulate-reinforced cementitious composites: SHPB experiments and numerical simulations	116668
Yuan, Cheng / Chen, Wensu / Pham, Thong M. / Chen, Li / Cui, Jian / Shi, Yanchao / Hao, Hong	Effect of aggregate size on the dynamic interfacial bond behaviour between basalt fiber reinforced polymer sheets and concrete	116584
Gao, Danying / Meng, Yang / Yang, Lin / Tang, Jiyu / Lv, Mingyan	Effect of ground granulated blast furnace slag on the properties of calcium sulfoaluminate cement	116665
Toumpanaki, Eleni / Lees, Janet M. / Barbezat, Michel / Terrasi, Giovanni P.	Effect of internal moisture content and dynamic mechanical analysis testing conditions on the T values of CFRP tendons	116771
Hou, Li / Li, Jun / Lu, Zhongyuan / Niu, Yunhui / Jiang, Jun / Li, Taozhu	Effect of nanoparticles on foaming agent and the foamed concrete	116698
Jia, Meng / Sha, Aimin / Zhang, Zengping / Li, Jiange / Yuan, Dongdong / Jiang, Wei	Effect of organic reagents on high temperature rheological characteristics of organic rectorite modified asphalt	116624
Ekinci, Abdullah	Effect of preparation methods on strength and microstructural properties of cemented marine clay	116690
Sasanipour, Hossein / Aslani, Farhad / Taherinezhad, Javad	Effect of silica fume on durability of self-compacting concrete made with waste recycled concrete aggregates	116598
Küsel, Frank / Kearsley, Elsabe	Effect of steel fibres in combination with different reinforcing ratios on the performance of continuous beams	116553
Liu, Peng / Chen, Ying / Yu, Zhiwu / Lu, Zhaohui	Effect of sulfate solution concentration on the deterioration mechanism and physical properties of concrete	116641
Girimath, Shashibhushan / Singh, Dharamveer	Effects of bio-oil on performance characteristics of base and recycled asphalt pavement binders	116684
Liu, Jie / Li, Yi / Zhang, Guijin / Liu, Yaning	Effects of cementitious grout components on rheological properties	116654
Fakhri, Mansour / Javadi, Sajad / Sedghi, Reza / Arzjani, Danial / Zarrinpour, Yousef	Effects of deicing agents on moisture susceptibility of the WMA containing recycled crumb rubber	116581
Ojo, Emeso B. / Bello, Kabirat O. / Mustapha, Kabiru / Teixeira, Ronaldo S. / Santos, Sérgio F. / Savastano, Holmer	Effects of fibre reinforcements on properties of extruded alkali activated earthen building materials	116778
Namoulniara, K. / Mahieux, P-Y. / Lux, J. / Aït-Mokhtar, A. / Turcry, Ph.	Efficiency of water repellent surface treatment: Experiments on low performance concrete and numerical investigation with pore network model	116638
Man, Xiangyang / Aminul Haque, M. / Chen, Bing	Engineering properties and microstructure analysis of magnesium phosphate cement mortar containing bentonite clay	116656
Dai, Zhuqing / Wu, Yunqiu / Hu, Linchao / Zhang, Wenyi / Mao, Linqiang	Evaluating physical-mechanical properties and long periods environmental risk of fired clay bricks incorporated with electroplating sludge	116716
Van Belleghem, Bjorn / Villagrán Zaccardi, Yury / van den Heede, Philip / Van Tittelboom, Kim / De Belie, Nele	Evaluation and comparison of traditional methods and Electron Probe Micro Analysis (EPMA) to determine the chloride ingress perpendicular to cracks in self-healing concrete	116789
Melugiri-Shankaramurthy, Bharath / Sargam, Yogiraj / Zhang, Xiao / Sun, Wen / Wang, Kejin / Qin, Hantang	Evaluation of cement paste containing recycled stainless steel powder for sustainable additive manufacturing	116696
Deng, Hanyu / Gu, Xingyu / Wang, Xiaowei / Wu, Chunying / Zhu, Chundong	Evaluation of high-temperature deformation of porous asphalt mixtures based on microstructure using X-ray computed tomography	116623
Sek Yee, Teh / Hamzah, Meor Othman / van den bergh, Wim	Evaluation of moisture susceptibility of asphalt-aggregate constituents subjected to direct tensile test using imaging technique	116642
Cikmit, Arlyn Aristo / Tsuchida, Takashi / Hashimoto, Ryota / Honda, Hideki / Kang, Gyeongo / Sogawa, Kota	Expansion characteristic of steel slag mixed with soft clay	116799
Ou, Ya / Fernando, Dilum / Gattas, Joseph M.	Experimental investigation of a novel concrete-timber floor panel system with digitally fabricated FRP-timber hollow core component	116667
Gao, Danying / Jing, Jiahua / Chen, Gang / Yang, Lin	Experimental investigation on flexural behavior of hybrid fibers reinforced recycled brick aggregates concrete	116652
Yang, Yekai / Wu, Chengqing / Liu, Zhongxian / Liang, Xiangwei / Xu, Shenchun	Experimental investigation on the dynamic behaviors of UHPFRC after exposure to high temperature	116679
Bao, Hao / Yu, Min / Xu, Lihua / Saafi, Mohamed / Ye, Jianqiao	Experimental study and multi-physics modelling of concrete under supercritical carbonation	116680
Li, Shiyang / Huang, Xin / Wu, Shuaishuai / Zhang, Wuman	Experimental study of the behaviors of stabilized soil confined by polyvinyl chloride pipe	116674
Bai, Zhun / Liu, Yuanxue / Yang, Juntang / He, Shaoqi	Exploring the dynamic response and energy dissipation capacity of functionally graded EPS concrete	116574
Li, Jing / Zhang, Fenglei / Muhammad, Yaseen / Liu, Yu / Wei, Yunhao / Chen, Hongkun	Fabrication and properties of wide temperature domain pavement seaweed modified bio-bitumen	117079
Orcesi, André D. / Feraille, Adélaïde / Chataigner, Sylvain	Fatigue strengthening of steel structures using high modulus CFRP plates: Development of a life-cycle analysis approach	116628
Yuan, Qiang / Li, Zemin / Zhou, Dajun / Huang, Tingjie / Huang, Hai / Jiao, Dengwu / Shi, Caijun	A feasible method for measuring the buildability of fresh 3D printing mortar	116600
Caetano, Hugo / Rodrigues, João Paulo C. / Pimienta, Pierre	Flexural strength at high temperatures of a high strength steel and polypropylene fibre concrete	116721
Al Gharawi, Mohanned / Adu-Gyamfi, Yaw / Washer, Glenn	A framework for automated time-lapse thermography data processing	116507
Morshed, Syed Ahnaf / Sinha, Arkabrata / Zhang, Qian / Tatar, Jovan	Hygrothermal conditioning of wet-layup CFRP-concrete adhesive joints modified with silane coupling agent and core-shell rubber nanoparticles	116531
Edmondson, Vikki / Woodward, John / Lim, Michael / Kane, Malal / Martin, James / Shyha, Islam	Improved non-contact 3D field and processing techniques to achieve macrotexture characterisation of pavements	116693
Lee, A. T. / Michel, M. / Ferrier, E. / Benmokrane, Brahim	Influence of curing conditions on mechanical behaviour of glued joints of carbon fibre-reinforced polymer composite/concrete	116385
Chouhan, Harshwardhan Singh / Kalla, Pawan / Nagar, Ravindra / Gautam, Pradeep Kumar	Influence of dimensional stone waste on mechanical and durability properties of mortar: A review	116662
Rochlani, Mrinali / Leischner, Sabine / Canon Falla, Gustavo / Wang, Dawei / Caro, Silvia / Wellner, Frohmut	Influence of filler properties on the rheological, cryogenic, fatigue and rutting performance of mastics	116974
Carević, Vedran / Ignjatović, Ivan	Influence of loading cracks on the carbonation resistance of RC elements	116583
Qian, Chengduo / Fan, Weiyu / Ren, Fangyong / Lv, Xiaobo / Xing, Baodong	Influence of polyphosphoric acid (PPA) on properties of crumb rubber (CR) modified asphalt	117094
Saldanha, Rodrigo Beck / Reddy, Krishna R. / Consoli, Nilo Cesar	Influence of sodium chloride on leaching behavior of fly ash stabilized with carbide lime	116571
You, Nanqiao / Li, Baoliang / Cao, Ruilin / Shi, Jinjie / Chen, Chun / Zhang, Yamei	The influence of steel slag and ferronickel slag on the properties of alkali-activated slag mortar	116614
Zhang, Xiao / Li, Guoxin / Song, Zhanping	Influence of styrene-acrylic copolymer latex on the mechanical properties and microstructure of Portland cement/Calcium aluminate cement/Gypsum cementitious mortar	116666
Ma, Xiaoyan / Chen, Huaxin / Gui, Cao / Xing, Mingliang / Yang, Pingwen	Influence of the properties of an asphalt binder on the rheological performance of mastic	116659
Kränzlein, E. / Harmel, J. / Pöllmann, H. / Krcmar, W.	Influence of the Si/Al ratio in geopolymers on the stability against acidic attack and the immobilization of Pb2+ and Zn2+	116634
Feng, Zhijun / Wang, Fajun / Xie, Ting / Ou, Junfei / Xue, Mingshan / Li, Wen	Integral hydrophobic concrete without using silane	116678
Wang, Ruiyang / Yu, Jianying / He, Peng / Gu, Shunjie / Cao, Zhilong / Liu, Quantao	Investigation of ion chelator and mineral admixtures improving salt-frost resistance of cement-based materials	116670
Kollmann, Jonas / Liu, Pengfei / Lu, Guoyang / Wang, Dawei / Oeser, Markus / Leischner, Sabine	Investigation of the microstructural fracture behaviour of asphalt mixtures using the finite element method	117078
Jindal, Bharat Bhushan	Investigations on the properties of geopolymer mortar and concrete with mineral admixtures: A review	116644
Izadi, Mohammadreza / Motavalli, Masoud / Ghafoori, Elyas	Iron-based shape memory alloy (Fe-SMA) for fatigue strengthening of cracked steel bridge connections	116800
Liu, Ang / Lin, Wenli / Jiang, Jingcai	Laboratory and constitutive analysis of relaxation tests for time-dependent properties of discontinuities	116688
Pająk, Małgorzata / Janiszewski, Jacek / Kruszka, Leopold	Laboratory investigation on the influence of high compressive strain rates on the hybrid fibre reinforced self-compacting concrete	116687
Jullien, A. / Proust, C. / Yazoghli-Marzouk, O.	LCA of alternative granular materials – Assessment of ecotoxicity and toxicty for road case studies	116737
Brencich, A. / Campeggio, F.	Leeb hardness for yielding stress assessment of steel bars in existing reinforced structures	116570
Ling, Zhibin / Xiang, Zhe / Liu, Weiqing / Yang, Huifeng / Tang, Ju	Load-slip behaviour of glue laminated timber connections with glued-in steel rod parallel to grain	117028
Rahul, A. V. / Santhanam, Manu / Meena, Hitesh / Ghani, Zimam	Mechanical characterization of 3D printable concrete	116710
Liu, Zhuangzhuang / Lou, Baowen / Sha, Aimin / Du, Peidong / Wang, Xuhao	Microstructure characterization of Portland cement pastes influenced by lower curing pressures	116636
Li, Li / Cao, Mingli / Ming, Xing / Yin, Hong / Sun, Ya-nan	Microstructure of calcium carbonate whisker reinforced cement paste after elevated temperature exposure	116609
Li, Chao / Wu, Shaopeng / Shu, Benan / Li, Yuanyuan / Chen, Zongwu	Microwave absorption and anti-aging properties of modified bitumen contained SiC attached layered double hydroxides	116714
Yıldırım, Zeynel Baran / Karacasu, Murat	Modelling of waste rubber and glass fibber with response surface method in hot mix asphalt	117070
Ghafoori Roozbahany, Ehsan / Partl, Manfred N. / Jelagin, Denis	Modelling the flow of asphalt under simulated compaction using discrete element	116432
Pradipta, Ivan / Kong, Daniel / Tan, Joash Ban Lee	Natural organic antioxidants from green tea inhibit corrosion of steel reinforcing bars embedded in mortar	117058
Sha, Dong / Pan, Baofeng / Sun, Yiren / Che, Tiankai / Lu, Jiale	A new approach to evaluating the moisture damage of semi-rigid base materials based on the eroding test by the hydrodynamic pressure generator	116613
Frontini, M. A. / Schreiner, W. / Vázquez, M. / Valcarce, M. B.	Nitrite corrosion inhibition in chloride-rich electrolytes correlated to the electrical properties of surface films on carbon steel	116650
Chen, Ruoyu / Jia, Wenbao / Lao, Dong / Li, Shujing / Hei, Daqian	A novel approach to process high-performance lightweight reticulated porous materials	116653
Saeli, Manfredi / Senff, Luciano / Tobaldi, David M. / Seabra, Maria Paula / Labrincha, João A.	Novel biomass fly ash-based geopolymeric mortars using lime slaker grits as aggregate for applications in construction: Influence of granulometry and binder/aggregate ratio	116643
Lachowicz, Jacek / Rucka, Magdalena	A novel heterogeneous model of concrete for numerical modelling of ground penetrating radar	116703
Baenla, J. / Bike Mbah, J. B. / Djon Li Ndjock, I. B. / Elimbi, A.	Partial replacement of low reactive volcanic ash by cassava peel ash in the synthesis of volcanic ash based geopolymer	116689
Li, Yang / Zhang, Xu / Wang, Ruijun / Lei, Yan	Performance enhancement of rubberised concrete via surface modification of rubber: A review	116691
Foroutan Mirhosseini, Ali / Tahami, Seyed Amid / Hoff, Inge / Dessouky, Samer / Ho, Chun-Hsing	Performance evaluation of asphalt mixtures containing high-RAP binder content and bio-oil rejuvenator	116465
Abdelmonem, Ayman / El-Feky, M. S. / Nasr, El-Sayed A. R. / Kohail, Mohamed	Performance of high strength concrete containing recycled rubber	116660
Li, Laibo / Zhang, Haiming / Guo, Xiangyang / Zhou, Xiangming / Lu, Lingchao / Chen, Mingxu / Cheng, Xin	Pore structure evolution and strength development of hardened cement paste with super low water-to-cement ratios	117108
Sebaaly, Peter E. / Ortiz, Jorge A. C. / Hand, Adam J. / Hajj, Elie Y.	Practical method for in-place density measurement of cold in-place recycling mixtures	116731
Abdel Aziz, Yasmin Hefni / Abdel Zaher, Yehia / Abdel Wahab, Mona / Khalaf, Mohamed	Predicting temperature rise in Jacketed concrete beams subjected to elevated temperatures	116460
Rossini, Marco / Saqan, Elias / Nanni, Antonio	Prediction of the creep rupture strength of GFRP bars	116620
Edwards, Kyle A. T. / Al-Abed, Suhaib H. / Hosseini, Seyedsaeid / Brake, Nicholas A.	Properties of a magnetic concrete core transformer for application in wireless power transfer systems	117041
Franus, Małgorzata / Panek, Rafał / Madej, Jarosław / Franus, Wojciech	The properties of fly ash derived lightweight aggregates obtained using microwave radiation	116677
Zhao, Xin / Li, Hedong / Wang, Cheng	Quasi-static and dynamic compressive behavior of ultra-high toughness cementitious composites in dry and wet conditions	117008
Zhang, Yurong / Zhou, Xiaoyun / Zhang, Yun / Zou, Chuanren / Cao, Yinghui / Zhang, Junzhi	Randomness of bidirectional chloride corrosion of sluice gate and time to corrosion initiation of reinforcement in a strong tidal environment	116707
Yang, Jingyu / Guo, Yinchuan / Shen, Aiqin / Chen, Zhihui / Qin, Xiao / Zhao, Ming	Research on drying shrinkage deformation and cracking risk of pavement concrete internally cured by SAPs	116705
Han, Xiao / Yang, Jinbo / Feng, Jingjing / Zhou, Cuiling / Wang, Xiaoqing	Research on hydration mechanism of ultrafine fly ash and cement composite	116697
Visakh, P. M. / Semkin, A. O. / Rezaev, I. A. / Fateev, A. V.	Review on soft polyurethane flame retardant	116673
Wang, Ming / Li, Rui / Wen, Yong / Pei, Jianzhong / Xing, Xiangyang / Chen, Zixuan	Rheological and aging behaviors of liquid rubber modified asphalt binders	116719
Qin, Zhaohui / Zhou, Shengbo / Ma, Cong / Long, Guangcheng / Xie, Youjun / Chen, Bing	Roles of metakaolin in magnesium phosphate cement: Effect of the replacement ratio of magnesia by metakaolin with different particle sizes	116675
Mei, Kaiyuan / Cheng, Xiaowei / Zhang, Liwei / Guo, Xiaoyang / Zhuang, Jia / Zhang, Chi	Self-healing mechanism of Zn-enhanced cement stone: An application for sour natural gas field	116651
Xu, Qiuhong / Shi, Danda / Shao, Wei	Service life prediction of RC square piles based on time-varying probability analysis	116824
Ababneh, Fuad A. / Alakhras, Abbas I. / Heikal, Mohamed / Ibrahim, Sahar M.	Stabilization of lead bearing sludge by utilization in fly ash-slag based geopolymer	116694
Xu, Qing / Ji, Tao / Yang, Zhengxian / Ye, Yilong	Steel rebar corrosion in artificial reef concrete with sulphoaluminate cement, sea water and marine sand	116685
Malena, Marialaura / Sangirardi, Marialuigia / de Felice, Gianmarco	Steel Reinforced Grout under uniaxial load: Experimental evidences and numerical modelling	116808
Han, Sen / Dong, Shihao / Liu, Mengmei / Han, Xiao / Liu, Yamin	Study on improvement of asphalt adhesion by hydrated lime based on surface free energy method	116794
Cao, Qi / Li, Huan / Lin, Zhibin	Study on the active confinement of GFRP-confined expansive concrete under axial compression	116683
Sun, Huadong / Ding, Yongling / Jiang, Peng / Wang, Baoqun / Zhang, Aiqin / Wang, Deming	Study on the interaction mechanism in the hardening process of cement-asphalt mortar	116663
Garcia, A. / Aboufoul, M. / Asamoah, F. / Jing, D.	Study the influence of the air void topology on porous asphalt clogging	116791
Villaquirán-Caicedo, Mónica A.	Studying different silica sources for preparation of alternative waterglass used in preparation of binary geopolymer binders from metakaolin/boiler slag	116621
Zhang, Zhaocai / Ba, Hengjing / Wu, Zhenyu	Sustainable corrosion inhibitor for steel in simulated concrete pore solution by maize gluten meal extract: Electrochemical and adsorption behavior studies	117080
Chougan, Mehdi / Marotta, Emanuele / Lamastra, Francesca R. / Vivio, Francesco / Montesperelli, Giampiero / Ianniruberto, Ugo / Bianco, Alessandra	A systematic study on EN-998-2 premixed mortars modified with graphene-based materials	116701
Mendes, Beatryz C. / Pedroti, Leonardo G. / Fontes, Mauricio P. F. / Ribeiro, José Carlos L. / Vieira, Carlos M. F. / Pacheco, Anderson A. / de Azevedo, Afonso R. G.	Technical and environmental assessment of the incorporation of iron ore tailings in construction clay bricks	116669
Zhan, Tianyi / Jiang, Jiali / Lu, Jianxiong / Zhang, Yaoli / Chang, Jianmin	Temperature-humidity-time equivalence and relaxation in dynamic viscoelastic response of Chinese fir wood	116637
Dalalbashi, Ali / Ghiassi, Bahman / Oliveira, Daniel V.	Textile-to-mortar bond behaviour in lime-based textile reinforced mortars	116682
Wu, Mingyue / Hu, Xiangming / Hu, ZunXiang / Zhao, Yanyun / Cheng, Weimin / Lu, Wei	Two-component polyurethane healing system: Effect of different accelerators and capsules on the healing efficiency of dynamic concrete cracks	116700
Chauhan, Parul / El Hajjar, Ahmad / Prime, Noémie / Plé, Olivier	Unsaturated behavior of rammed earth: Experimentation towards numerical modelling	116646
Wang, Chaohui / Xiao, Xudang / Lu, Youfu / Shu, Cheng / Guo, Jin	Utilization and properties of modified epoxy resin for colorful anti-slip pavements	116801
Wang, Ziyi / He, Zhaoyi / Wang, Zhi / Ning, Mei	Utilization of magnetite as microwave absorber to prepare microwave-heatable aggregate for deicing in cementitious composite	116664
Kianimehr, Marzieh / Shourijeh, Piltan Tabatabaie / Binesh, Seyed Mohammad / Mohammadinia, Alireza / Arulrajah, Arul	Utilization of recycled concrete aggregates for light-stabilization of clay soils	116792
Gökalp, İslam / Uz, Volkan Emre	Utilizing of Waste Vegetable Cooking Oil in bitumen: Zero tolerance aging approach	116695
Dąbrowski, Mariusz / Glinicki, Michał A. / Dziedzic, Kinga / Antolik, Aneta	Validation of sequential pressure method for evaluation of the content of microvoids in air entrained concrete	116633
Zhang, Jun / Li, Zhiwei / Chu, Hao / Lu, Jiaqi	A viscoelastic damage constitutive model for asphalt mixture under the cyclic loading	116631
Shoaei, Parham / Musaeei, Hamid Reza / Mirlohi, Farinaz / Narimani zamanabadi, Saeid / Ameri, Farshad / Bahrami, Nasrollah	Waste ceramic powder-based geopolymer mortars: Effect of curing temperature and alkaline solution-to-binder ratio	116686

About this
data sheet
IssueID
32728
Published on:
12/08/2019
Last updated on:
11/12/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - December 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - December 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.