Construction and Building Materials - August 2017

Published:	August 2017

Articles in this Issue

Author(s)	Title	Page(s)
Zhutovsky, Semion / Hooton, R. Douglas	Accelerated testing of cementitious materials for resistance to physical sulfate attack	98-106
Zhang, Zhengqi / Huang, Shuolei / Zhang, Ke	Accurate detection method for compaction uniformity of asphalt pavement	88-97
Botas, Sandro / Veiga, Rosário / Velosa, Ana	Air lime mortars for conservation of historic tiles: Bond strength of new mortars to old tiles	426-434
Alonso, M. M. / Gismera, S. / Blanco, M. T. / Lanzón, M. / Puertas, F.	Alkali-activated mortars: Workability and rheological behaviour	576-587
Sañudo, Roberto / Cerrada, Mikel / Alonso, Borja / dell'Olio, Luigi	Analysis of the influence of support positions in transition zones. A numerical analysis	207-217
Loaiza, Alexandra / Cifuentes, Sergio / Colorado, Henry A.	Asphalt modified with superfine electric arc furnace steel dust (EAF dust) with high zinc oxide content	538-547
Al-Dahawi, Ali / Yıldırım, Gürkan / Öztürk, Oğuzhan / Şahmaran, Mustafa	Assessment of self-sensing capability of Engineered Cementitious Composites within the elastic and plastic ranges of cyclic flexural loading	1-10
Ferdous, Wahid / Manalo, Allan / Aravinthan, Thiru	Bond behaviour of composite sandwich panel and epoxy polymer matrix: Taguchi design of experiments and theoretical predictions	76-87
Zhang, Jun / Weng, Xingzhong / Yang, Bohan / Li, Yifeng / Liu, Junzhong / Jiang, Le	Bonding characteristics of grouting layer in Prefabricated Cement Concrete Pavement	528-537
Arulrajah, Arul / Mohammadinia, Alireza / D'Amico, Angelo / Horpibulsuk, Suksun	Cement kiln dust and fly ash blends as an alternative binder for the stabilization of demolition aggregates	218-225
Kazemian, Ali / Yuan, Xiao / Cochran, Evan / Khoshnevis, Behrokh	Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture	639-647
Park, Sun-Jong / Kim, Gyu Jin / Kwak, Hyo-Gyoung	Characterization of stress-dependent ultrasonic nonlinearity variation in concrete under cyclic loading using nonlinear resonant ultrasonic method	272-282
Lee, Kang Seok / Choi, Jeong-Il / Kim, Sang-Koo / Lee, Bong-Kee / Hwang, Jae-Seung / Lee, Bang Yeon	Damping and mechanical properties of composite composed of polyurethane matrix and preplaced aggregates	68-75
Teixeira, S. / Santilli, A. / Puente, I.	Demoulding vertical elements: Recommendations for apply maturity functions	392-401
Heidari, Mojtaba / Torabi-Kaveh, Mehdi / Chastre, Carlos / Ludovico-Marques, Marco / Mohseni, Hassan / Akefi, Hossein	Determination of weathering degree of the Persepolis stone under laboratory and natural conditions using fuzzy inference system	28-41
Wu, B. / Ye, G.	Development of porosity of cement paste blended with supplementary cementitious materials after carbonation	52-61
Dodds, Wayne / Goodier, Chris / Christodoulou, Christian / Austin, Simon / Dunne, David	Durability performance of sustainable structural concrete: Effect of coarse crushed concrete aggregate on microstructure and water ingress	183-195
Zhu, Cong / Niu, Jiangang / Li, Jingjun / Wan, Chaojun / Peng, Jiahui	Effect of aggregate saturation degree on the freeze–thaw resistance of high performance polypropylene fiber lightweight aggregate concrete	367-375
Khanfour, Mohamed-Akram / El Refai, Ahmed	Effect of freeze-thaw cycles on concrete reinforced with basalt-fiber reinforced polymers (BFRP) bars	135-146
Teymen, Ahmet	Effect of mineral admixture types on the grout strength of fully-grouted rockbolts	376-382
Cho, Young-Keun / Yoo, Sung-Won / Jung, Sang-Hwa / Lee, Kwang-Myong / Kwon, Seung-Jun	Effect of Na2O content, SiO2/Na2O molar ratio, and curing conditions on the compressive strength of FA-based geopolymer	253-260
Martín-Morales, M. / Cuenca-Moyano, G. M. / Valverde-Espinosa, I. / Valverde-Palacios, I.	Effect of recycled aggregate on physical-mechanical properties and durability of vibro-compacted dry-mixed concrete hollow blocks	303-310
Zani, L. / Giustozzi, F. / Harvey, J.	Effect of storage stability on chemical and rheological properties of polymer-modified asphalt binders for road pavement construction	326-335
Hosseini Balam, Nafise / Mostofinejad, Davood / Eftekhar, Mohamadreza	Effects of bacterial remediation on compressive strength, water absorption, and chloride permeability of lightweight aggregate concrete	107-116
Cavaco, Eduardo S. / Bastos, Afonso / Santos, Filipe	Effects of corrosion on the behaviour of precast concrete floor systems	411-418
Li, Xiangyu / Liu, Yan Ming / Li, Wen Gui / Li, Chen Yang / Sanjayan, Jay G. / Duan, Wen Hui / Li, Zongjin	Effects of graphene oxide agglomerates on workability, hydration, microstructure and compressive strength of cement paste	402-410
Li, Chao / Chen, Zongwu / Wu, Shaopeng / Li, Bo / Xie, Jun / Xiao, Yue	Effects of steel slag fillers on the rheological properties of asphalt mastic	383-391
Li, Ming / Liu, Jiaping / Tian, Qian / Wang, Yujiang / Xu, Wen	Efficacy of internal curing combined with expansive agent in mitigating shrinkage deformation of concrete under variable temperature condition	354-360
de Almeida Souza, Luan. Rodrigo / Farias de Medeiros, Marcelo Henrique / Pereira, Eduardo / Capraro, Ana Paula Brandão	Electrochemical chloride extraction: Efficiency and impact on concrete containing 1% of NaCl	435-444
Ulzurrun, Gonzalo S. D. / Zanuy, Carlos	Enhancement of impact performance of reinforced concrete beams without stirrups by adding steel fibers	166-182
Shi, Tao / Zheng, Liwei / Xu, Xiuchao	Evaluation of alkali reactivity of concrete aggregates via AC impedance spectroscopy	548-554
Gong, Minghui / Zhu, Haoran / Pauli, Troy / Yang, Jun / Wei, Jianming / Yao, Zeheng	Evaluation of bio-binder modified asphalt's adhesion behavior using sessile drop device and atomic force microscopy	42-51
Wu, Shenghua / Li, Xiaojun	Evaluation of effect of curing time on mixture performance of Advera warm mix asphalt	62-67
Fan, Haifeng / Vassilopoulos, Anastasios P. / Keller, Thomas	Evaluation of grout materials for CFRP ground anchors with strap ends	196-206
Zhang, Jinrui / Ding, Xiaoping / Zhao, Qingxin	Experimental and numerical investigation of scattering gravels on the surface bond strength of self-compacting concrete	11-19
Lee, Su Hyung / Lee, Sung Jin / Park, Jeung Geun / Choi, Yeong-Tae	An experimental study on the characteristics of polyurethane-mixed coarse aggregates by large-scale triaxial test	117-125
Luo, Sang / Qian, Zhendong / Yang, Xu / Lu, Qing	Fatigue behavior of epoxy asphalt concrete and its moisture susceptibility from flexural stiffness and phase angle	506-517
Dehghani, Morteza / Tremblay, Robert / Leclerc, Martin	Fatigue failure of 350WT steel under large-strain seismic loading at room and subfreezing temperatures	602-618
Lei, Dong / Zhang, Pei / He, Jintao / Bai, Pengxiang / Zhu, Feipeng	Fatigue life prediction method of concrete based on energy dissipation	419-425
Irshidat, Mohammad R. / Al-Saleh, Mohammed H.	Flexural strength recovery of heat-damaged RC beams using carbon nanotubes modified CFRP	474-482
Foglar, Marek / Hajek, Radek / Fladr, Josef / Pachman, Jiri / Stoller, Jiri	Full-scale experimental testing of the blast resistance of HPFRC and UHPFRC bridge decks	588-601
Rasool, Raqiqa tur / Wang, Shifeng / Zhang, Yong / Li, Yue / Zhang, Guangtai	Improving the aging resistance of SBS modified asphalt with the addition of highly reclaimed rubber	126-134
Ranieri, Vittorio / Kowalski, Karol J. / Berloco, Nicola / Colonna, Pasquale / Perrone, Paola	Influence of wax additives on the properties of porous asphalts	261-271
Zhang, Dongmei / Zhang, Henglong / Shi, Caijun	Investigation of aging performance of SBS modified asphalt with various aging methods	445-451
Zhang, Jinrui / Xu, Lingna / Zhao, Qingxin	Investigation of carbon fillers modified electrically conductive concrete as grounding electrodes for transmission towers: Computational model and case study	347-353
Chen, Jun / Wang, Hao / Zhu, Hongzhou	Investigation of permeability of open graded asphalt mixture considering effects of anisotropy and two-dimensional flow	318-325
Liu, Peiyao / Farzana, Rifat / Rajarao, Ravindra / Sahajwalla, Veena	Lightweight expanded aggregates from the mixture of waste automotive plastics and clay	283-291
Anania, Laura / D'Agata, Giuseppe	Limit analysis of vaulted structures strengthened by an innovative technology in applying CFRP	336-346
Donnini, Jacopo / Corinaldesi, Valeria	Mechanical characterization of different FRCM systems for structural reinforcement	565-575
Ahmad, Zakiah / Lum, Wei Chen / Lee, Seng Hua / Razlan, Mohd Azran / Wan Mohamad, Wan Hazira	Mechanical properties of finger jointed beams fabricated from eight Malaysian hardwood species	464-473
Mendes, Julia Castro / Kuster Moro, Taís / Santana Figueiredo, Aline / do Carmo Silva, Keoma Defáveri / Cordeiro Silva, Gabriela / Brigolini Silva, Guilherme Jorge / Fiorotti Peixoto, Ricardo André	Mechanical, rheological and morphological analysis of cement-based composites with a new LAS-based air entraining agent	648-661
Gao, Pinhai / Wei, Jiangxiong / Zhang, Tongsheng / Hu, Jie / Yu, Qijun	Modification of chloride diffusion coefficient of concrete based on the electrical conductivity of pore solution	361-366
Xu, Lihua / Deng, Fangqian / Chi, Yin	Nano-mechanical behavior of the interfacial transition zone between steel-polypropylene fiber and cement paste	619-638
El Cheikh, K. / Rémond, S. / Khalil, N. / Aouad, G.	Numerical and experimental studies of aggregate blocking in mortar extrusion	452-463
Alderete, Natalia / Villagrán, Yury / Mignon, Arn / Snoeck, Didier / De Belie, Nele	Pore structure description of mortars containing ground granulated blast-furnace slag by mercury intrusion porosimetry and dynamic vapour sorption	157-165
Wei, Bo / Zhang, Yimin / Bao, Shenxu	Preparation of geopolymers from vanadium tailings by mechanical activation	236-242
Zhu, Wenjun / François, Raoul / Liu, Yong	Propagation of corrosion and corrosion patterns of bars embedded in RC beams stored in chloride environment for various periods	147-156
Valivonis, Juozas / Skuturna, Tomas / Daugevičius, Mykolas / Šneideris, Arnoldas	Punching shear strength of reinforced concrete slabs with plastic void formers	518-527
Bastos, Juceline B. S. / Babadopulos, Lucas F. A. L. / Soares, Jorge B.	Relationship between multiple stress creep recovery (MSCR) binder test results and asphalt concrete rutting resistance in Brazilian roadways	20-27
Wang, Tao / Xiao, Feipeng / Amirkhanian, Serji / Huang, Weidong / Zheng, Mulian	A review on low temperature performances of rubberized asphalt materials	483-505
Overby, David / Kowalsky, Mervyn / Seracino, Rudolf	Stress-strain response of A706 grade 80 reinforcing steel	292-302
Kumar, Sanjeev / Sharma, Ajay Kumar / Sherawat, Deepak / Dutt, Mohit / Gupta, Ramesh Chandra	Technical note on sorption and permeability of concrete containing rubber and quartz sandstone aggregates	311-317
O'Neill, Caoimhe / McPolin, Daniel / Taylor, Su E. / Harte, Annette M. / O'Ceallaigh, Conan / Sikora, Karol S.	Timber moment connections using glued-in basalt FRP rods	226-235
Soliman, Nancy A. / Tagnit-Hamou, Arezki	Using glass sand as an alternative for quartz sand in UHPC	243-252
Wu, Yunpeng / Krishnan, Padmaja / Yu, Liya E. / Zhang, Min-Hong	Using lightweight cement composite and photocatalytic coating to reduce cooling energy consumption of buildings	555-564

About this
data sheet
IssueID
22631
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - August 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - August 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.