Construction and Building Materials - February 2017

Published:	February 2017

Articles in this Issue

Author(s)	Title	Page(s)
Lastra-González, Pedro / Indacoechea-Vega, Irune / Calzada-Perez, Miguel A. / Castro-Fresno, Daniel / Carpio-García, Jaime	Analysis of the skid resistance and adherence between layers of asphalt concretes modified by dry way with polymeric waste	163-170
Muhd Norhasri, M. S. / Hamidah, M. S. / Mohd Fadzil, A.	Applications of using nano material in concrete: A review	91-97
Sun, Lu / Xin, Xiantao / Ren, Jiaolong	Asphalt modification using nano-materials and polymers composite considering high and low temperature performance	358-366
Sokairge, Hesham / Rashad, Ahmed / Elshafie, Hany	Behavior of post-tensioned dry-stack interlocking masonry walls under out of plane loading	348-357
Knorz, Markus / Torno, Stefan / Van de Kuilen, Jan-Willem	Bonding quality of industrially produced cross-laminated timber (CLT) as determined in delamination tests	219-225
Hanjitsuwan, Sakonwan / Phoo-ngernkham, Tanakorn / Damrongwiriyanupap, Nattapong	Comparative study using Portland cement and calcium carbide residue as a promoter in bottom ash geopolymer mortar	128-134
Tekin, Ilker / Durgun, Muhammed Yasin / Gencel, Osman / Bilir, Turhan / Brostow, Witold / Hagg Lobland, Haley E.	Concretes with synthetic aggregates for sustainability	425-432
Pedrosa, Filipe / Andrade, Carmen	Corrosion induced cracking: Effect of different corrosion rates on crack width evolution	525-533
Raut, Ashwin Narendra / Gomez, Christy Pathrose	Development of thermally efficient fibre-based eco-friendly brick reusing locally available waste materials	275-284
Alsalman, Ali / Dang, Canh N. / Hale, W. Micah	Development of ultra-high performance concrete with locally available materials	135-145
Wang, Chengwen / Chen, Xin / Wang, Ruihe	Do chlorides qualify as accelerators for the cement of deepwater oil wells at low temperature?	482-494
Lynda Amel, Chaabane / Kadri, El-Hadj / Sebaibi, Yahia / Soualhi, Hamza	Dune sand and pumice impact on mechanical and thermal lightweight concrete properties	209-218
Hyeok-Jung, Kim / Sang-Min, Park / Subbiah, Karthick / Seung-Jun, Kwon	Durability performance evaluation of concrete containing TDFA (Tire Derived Fuel Ash)	376-386
Liu, Hezhi / Zhang, Qian / Li, Victor / Su, Huaizhi / Gu, Chongshi	Durability study on engineered cementitious composites (ECC) under sulfate and chloride environment	171-181
Sun, Daquan / Yu, Fan / Li, Lihan / Lin, Tianban / Zhu, X. Y.	Effect of chemical composition and structure of asphalt binders on self-healing	495-501
Ryu, Hwa-Sung / Singh, Jitendra Kumar / Lee, Han-Seung / Ismail, Mohamed A. / Park, Won-Jun	Effect of LiNO 2 inhibitor on corrosion characteristics of steel rebar in saturated Ca(OH) 2 solution containing NaCl: An electrochemical study	387-396
Chen, Xudong / Bu, Jingwu / Fan, Xiangqian / Lu, Jun / Xu, Lingyu	Effect of loading frequency and stress level on low cycle fatigue behavior of plain concrete in direct tension	367-375
Chang, Jun / Zhang, Yangyang / Shang, Xiaopeng / Zhao, Jiuye / Yu, Xin	Effects of amorphous AH 3 phase on mechanical properties and hydration process of C 4 A 3S¯-CS¯H 2 -CH-H 2 O system	314-322
Hou, Tsung-Chin / Nguyen, Van Kien / Su, Yu-Min / Chen, Yuan-Rong / Chen, Pei-Ju	Effects of coarse aggregates on the electrical resistivity of Portland cement concrete	397-408
Eren, Faruk / Gödek, Eren / Keskinateş, Muhammer / Tosun-Felekoğlu, Kamile / Felekoğlu, Burak	Effects of latex modification on fresh state consistency, short term strength and long term transport properties of cement mortars	226-233
Kang, Suk-Pyo / Kwon, Seung-Jun	Effects of red mud and Alkali-Activated Slag Cement on efflorescence in cement mortar	459-467
Tian, Qing / Yuan, Qiang / Fang, Lei / Wang, Yong / Liu, Zanqun / Deng, Dehua	Estimation of elastic modulus of cement asphalt binder with high content of asphalt	98-106
Schankoski, Rudiele Aparecida / Pilar, Ronaldo / Prudêncio, Luiz Roberto / Ferron, Raissa Douglas	Evaluation of fresh cement pastes containing quarry by-product powders	234-242
Lee, Il-Wha / Pyo, Sukhoon	Experimental investigation on the application of quick-hardening mortar for converting railway ballasted track to concrete track on operating line	154-162
Chen, Bo / Zhang, Xiaoning / Yu, Jiangmiao / Wang, Yangyang	Impact of contact stress distribution on skid resistance of asphalt pavements	330-339
Faramarzi, Masoud / Golestani, Behnam / Lee, K. Wayne	Improving moisture sensitivity and mechanical properties of sulfur extended asphalt mixture by nano-antistripping agent	534-542
Husain, Adel / Kupwade-Patil, Kunal / Al-Aibani, Anfal F. / Abdulsalam, Mohammad F.	In situ electrochemical impedance characterization of cement paste with volcanic ash to examine early stage of hydration	107-117
Duan, Zhengyang / Li, Jianxi / Li, Tianguo / Zheng, Shurui / Han, Weiming / Geng, Qingyu / Guo, Huibin	Influence of crystal modifier on the preparation of α-hemihydrate gypsum from phosphogypsum	323-329
Parthiban, Kathirvel / Saravana Raja Mohan, Kaliyaperumal	Influence of recycled concrete aggregates on the engineering and durability properties of alkali activated slag concrete	65-72
Triantafillou, Thanasis C. / Karlos, Kyriakos / Kefalou, Kalliopi / Argyropoulou, Eirini	An innovative structural and energy retrofitting system for URM walls using textile reinforced mortars combined with thermal insulation: Mechanical and fire behavior	1-13
Kim, Changhyuk / Hong, Yoon-Ki / Lee, Jung-Yoon	Long-term dynamic stiffness of resilient materials in floating floor systems	27-38
Kim, Dahae / Norouzi, Amirhossein / Kass, Said / Liske, Tara / Kim, Y. Richard	Mechanistic performance evaluation of pavement sections containing RAP and WMA additives in Manitoba	39-50
Serralheiro, Maria Inês / de Brito, Jorge / Silva, Ana	Methodology for service life prediction of architectural concrete facades	261-274
Guo, Xiaolu / Meng, Fanjie / Shi, Huisheng	Microstructure and characterization of hydrothermal synthesis of Al-substituted tobermorite	253-260
Eckert, Matthias / Oliveira, Miguel	Mitigation of the negative effects of recycled aggregate water absorption in concrete technology	416-424
Liu, Pengfei / Hu, Jing / Wang, Dawei / Oeser, Markus / Alber, Stefan / Ressel, Wolfram / Canon Falla, Gustavo	Modelling and evaluation of aggregate morphology on asphalt compression behavior	196-208
Niedoba, Krzysztof / Slížková, Zuzana / Frankeová, Dita / Lara Nunes, Cristiana / Jandejsek, Ivan	Modifying the consolidation depth of nanolime on Maastricht limestone	51-56
Song, Xiaobin / Shang, Susu / Chen, Dandan / Gu, Xianglin	Multi-walled carbon nanotube reinforced mortar-aggregate interfacial properties	57-64
Mokhtari, Ali / Lee, Hosin "David" / Williams, R. Christopher / Guymon, C. Allan / Scholte, Jon P. / Schram, Scott	A novel approach to evaluate fracture surfaces of aged and rejuvenator-restored asphalt using cryo-SEM and image analysis techniques	301-313
Padanattil, Akhila / Karingamanna, Jayanarayanan / Mini, K. M.	Novel hybrid composites based on glass and sisal fiber for retrofitting of reinforced concrete structures	146-153
Lu, Cong / Leung, Christopher K. Y. / Li, Victor C.	Numerical model on the stress field and multiple cracking behavior of Engineered Cementitious Composites (ECC)	118-127
Wasserman, Rina (Irina)	The performance of high fluidity concrete for normal strength structures	285-300
Haach, Vladimir Guilherme / Juliani, Lucas Marrara	Possibilities of using ultrasound for the technological control of concrete of hollow-core slabs	409-415
Omran, Ahmed / Harbec, David / Tagnit-Hamou, Arezki / Gagné, Richard	Production of roller-compacted concrete using glass powder: Field study	450-458
Ma, Chau-Khun / Apandi, Nazirah Mohd / Sofrie, Chin Siew Yung / Ng, Jen Hau / Lo, Wen Haur / Awang, Abdullah Zawawi / Omar, Wahid	Repair and rehabilitation of concrete structures using confinement: A review	502-515
Pan, Xiaoying / Shi, Zhenguo / Shi, Caijun / Ling, Tung-Chai / Li, Ning	A review on surface treatment for concrete – Part 2: Performance	81-90
Fathi, Hamoon / Lameie, Tina / Maleki, Mehdi / Yazdani, Rshwan	Simultaneous effects of fiber and glass on the mechanical properties of self-compacting concrete	443-449
Zhan, Qiwei / Qian, Chunxiang	Stabilization of sand particles by bio-cement based on CO 2 capture and utilization: Process, mechanical properties and microstructure	73-80
Arslan, Mehmet Emin / Emiroglu, Mehmet / Yalama, Ahmet	Structural behavior of rammed earth walls under lateral cyclic loading: A comparative experimental study	433-442
Ilić, Biljana / Radonjanin, Vlastimir / Malešev, Mirjana / Zdujić, Miodrag / Mitrović, Aleksandra	Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions	243-252
Messina, F. / Ferone, C. / Molino, A. / Roviello, G. / Colangelo, F. / Molino, B. / Cioffi, R.	Synergistic recycling of calcined clayey sediments and water potabilization sludge as geopolymer precursors: Upscaling from binders to precast paving cement-free bricks	14-26
Marie, Iqbal	Thermal conductivity of hybrid recycled aggregate – Rubberized concrete	516-524
Vassaux, S. / Gaudefroy, V. / Boulangé, L. / Pévère, A. / Mouillet, V. / Barragan-Montero, V.	Towards a better understanding of wetting regimes at the interface asphalt/aggregate during warm-mix process of asphalt mixtures	182-195
Pique, Teresa M. / Vazquez, Analía / Filho, Romildo Dias Toledo	Use of simple non-destructive techniques to evaluate the hydration reactions of PVA-modified cement pastes	340-347
Labbaci, Y. / Abdelaziz, Y. / Mekkaoui, A. / Alouani, A. / Labbaci, B.	The use of the volcanic powders as supplementary cementitious materials for environmental-friendly durable concrete	468-481

About this
data sheet
IssueID
22616
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - February 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - February 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.