Construction and Building Materials - November 2015

Published:	November 2015

Articles in this Issue

Author(s)	Title	Page(s)
Mohebi, Reza / Behfarnia, Kiachehr / Shojaei, Mohammad	Abrasion resistance of alkali-activated slag concrete designed by Taguchi method	792-798
Ko, Ming-Sheng / Chen, Ying-Liang / Jiang, Jhih-Hua	Accelerated carbonation of basic oxygen furnace slag and the effects on its mechanical properties	286-293
Darain, Kh Mahfuz ud / Shamshirband, Sahaboddin / Jumaat, Mohd Zamin / Obaydullah, M.	Adaptive neuro fuzzy prediction of deflection and cracking behavior of NSM strengthened RC beams	276-285
Wang, Xiao-Yong / Park, Ki-Bong	Analysis of compressive strength development of concrete containing high volume fly ash	810-819
Carmo, R. N. F. / Valença, J. / Silva, D. / Dias-Da-Costa, D.	Assessing steel strains on reinforced concrete members from surface cracking patterns	265-275
Calligaris, Guilherme A. / Franco, Margareth K. K. D. / Aldrige, Laurence P. / Rodrigues, Michelle S. / Beraldo, Antônio Ludovico / Yokaichiya, Fabiano / Turrillas, Xavier / Cardoso, Lisandro P.	Assessing the pozzolanic activity of cements with added sugar cane straw ash by synchrotron X-ray diffraction and Rietveld analysis	44-50
Sengun, N. / Demirdag, S. / Ugur, I. / Akbay, D. / Altindag, R.	Assessment of the physical and mechanical variations of some travertines depend on the bedding plane orientation under physical weathering conditions	641-648
Singh, M. / Vinodh Kumar, S. / Waghmare, Sujata A.	Characterization of 6–11th century A.D decorative lime plasters of rock cut caves of Ellora	156-170
Gao, X. / Yu, Q. L. / Brouwers, H. J. H.	Characterization of alkali activated slag–fly ash blends containing nano-silica	397-406
Jamshidi, Ali / Mohd Hasan, Mohd Rosli / Yao, Hui / You, Zhanping / Hamzah, Meor Othman	Characterization of the rate of change of rheological properties of nano-modified asphalt	437-446
Real, Sofia / Bogas, J. Alexandre / Pontes, Jorge	Chloride migration in structural lightweight aggregate concrete produced with different binders	425-436
Mengxiao, Shi / Qiang, Wang / Zhikai, Zhou	Comparison of the properties between high-volume fly ash concrete and high-volume steel slag concrete under temperature matching curing condition	649-655
Berto, Luisa / Saetta, Anna / Talledo, Diego	Constitutive model of concrete damaged by freeze–thaw action for evaluation of structural performance of RC elements	559-569
Yun, Kyong-Ku / Choi, Pangil / Yeon, Jung Heum	Correlating rheological properties to the pumpability and shootability of wet-mix shotcrete mixtures	884-891
Echeverry, Juan S. / Correal, Juan F.	Cyclic behavior of Laminated Guadua Mat sheathing-to-framing connections	69-79
Gentilini, P. / Yazoghli-Marzouk, O. / Delmotte, V. / Descantes, Y.	Determination of the water content of fillerised fine aggregates in the saturated surface dry state	662-670
Kazem, Hamid / Bunn, William G. / Seliem, Hatem M. / Rizkalla, Sami H. / Gleich, Harry	Durability and long term behavior of FRP/foam shear transfer mechanism for concrete sandwich panels	722-734
Al-Mosawe, Alaa / Al-Mahaidi, Riadh / Zhao, Xiao-Ling	Effect of CFRP properties, on the bond characteristics between steel and CFRP laminate under quasi-static loading	489-501
Awal, A. S. M. Abdul / Shehu, I. A. / Ismail, Mohammad	Effect of cooling regime on the residual performance of high-volume palm oil fuel ash concrete exposed to high temperatures	875-883
Kamali, Mahsa / Ghahremaninezhad, Ali	Effect of glass powders on the mechanical and durability properties of cementitious materials	407-416
Li, Rui / Pei, Jianzhong / Sun, Changle	Effect of nano-ZnO with modified surface on properties of bitumen	656-661
Ji, Tao / Zheng, Deng-Deng / Chen, Xian-Feng / Lin, Xu-jian / Wu, Hwai-Chung	Effect of prewetting degree of ceramsite on the early-age autogenous shrinkage of lightweight aggregate concrete	102-111
Luo, Rong / Zhang, Derun / Zeng, Zhe / Lytton, Robert L.	Effect of surface tension on the measurement of surface energy components of asphalt binders using the Wilhelmy Plate Method	900-909
Cunha, Sandra / Aguiar, José / Pacheco-Torgal, Fernando	Effect of temperature on mortars with incorporation of phase change materials	89-101
Bernal, Susan A.	Effect of the activator dose on the compressive strength and accelerated carbonation resistance of alkali silicate-activated slag/metakaolin blended materials	217-226
Wang, Lei / Zhang, Xuhui / Zhang, Jianren / Ma, Yafei / Liu, Yongming	Effects of stirrup and inclined bar corrosion on shear behavior of RC beams	537-546
Mehrara, A. / Khodaii, A.	Evaluation of moisture conditioning effect on damage recovery of asphalt mixtures during rest time application	294-304
Ma, Tao / Huang, Xiaoming / Zhao, Yongli / Zhang, Yao	Evaluation of the diffusion and distribution of the rejuvenator for hot asphalt recycling	530-536
Karakaş, Ahmet Sertaç / Kuloğlu, Necati / Kök, Baha Vural / Yilmaz, Mehmet	The evaluation of the field performance of the neat and SBS modified hot mixture asphalt	678-684
Behnood, Ali / Verian, Kho Pin / Modiri Gharehveran, Mahsa	Evaluation of the splitting tensile strength in plain and steel fiber-reinforced concrete based on the compressive strength	519-529
Asadollahfardi, Gholamreza / Asadi, Mohsen / Jafari, Hamidreza / Moradi, Abdolmohammad / Asadollahfardi, Rashin	Experimental and statistical studies of using wash water from ready-mix concrete trucks and a batching plant in the production of fresh concrete	305-314
Indacoechea-Vega, I. / Pascual-Muñoz, P. / Castro-Fresno, D. / Calzada-Pérez, M. A.	Experimental characterization and performance evaluation of geothermal grouting materials subjected to heating–cooling cycles	583-592
Khouadjia, Mohamed Lyes Kamel / Mezghiche, Bouzidi / Drissi, Mounsif	Experimental evaluation of workability and compressive strength of concrete with several local sand and mineral additions	194-203
Toraldo, Emanuele / Mariani, Edoardo / Alberti, Susanna / Crispino, Maurizio	Experimental investigation into the thermal behavior of wearing courses for road pavements due to environmental conditions	846-852
Shafabakhsh, G. H. / Ani, O. Jafari	Experimental investigation of effect of Nano TiO2/SiO2 modified bitumen on the rutting and fatigue performance of asphalt mixtures containing steel slag aggregates	692-702
Han, Qinghua / Wang, Lichen / Xu, Jie	Experimental research on mechanical properties of transverse enhanced and high-temperature-resistant CFRP tendons for prestressed structure	864-874
Gesoǧlu, Mehmet / Güneyisi, Erhan / Öz, Hatice Öznur / Taha, Ihsan / Yasemin, Mehmet Taner	Failure characteristics of self-compacting concretes made with recycled aggregates	334-344
Micaelo, R. / Pereira, A. / Quaresma, L. / Cidade, M. T.	Fatigue resistance of asphalt binders: Assessment of the analysis methods in strain-controlled tests	703-712
Amin, M. S. / El-Gamal, S. M. A. / Hashem, F. S.	Fire resistance and mechanical properties of carbon nanotubes – clay bricks wastes (Homra) composites cement	237-249
Mertol, Halit Cenan / Baran, Eray / Bello, Hussain Jibril	Flexural behavior of lightly and heavily reinforced steel fiber concrete beams	185-193
Zhou, Yong / Gao, Jie / Sun, Zhihui / Qu, Wenjun	A fundamental study on compressive strength, static and dynamic elastic moduli of young concrete	137-145
Kanellopoulos, A. / Qureshi, T. S. / Al-Tabbaa, A.	Glass encapsulated minerals for self-healing in cement based composites	780-791
Phoo-ngernkham, Tanakorn / Sata, Vanchai / Hanjitsuwan, Sakonwan / Ridtirud, Charoenchai / Hatanaka, Shigemitsu / Chindaprasirt, Prinya	High calcium fly ash geopolymer mortar containing Portland cement for use as repair material	482-488
Holstov, Artem / Bridgens, Ben / Farmer, Graham	Hygromorphic materials for sustainable responsive architecture	570-582
Corrêa, Andréa Aparecida Ribeiro / Mendes, Lourival Marin / Barbosa, Normando Perazzo / Protásio, Thiago de Paula / Campos, Nathalia de Aguiar / Tonoli, Gustavo Henrique Denzin	Incorporation of bamboo particles and "synthetic termite saliva" in adobes	250-256
Zhang, Jiake / Shi, Caijun / Li, Yake / Pan, Xiaoying / Poon, Chi-Sun / Xie, Zhaobin	Influence of carbonated recycled concrete aggregate on properties of cement mortar	1-7
Ge, Zhi / Wang, Yuanyuan / Sun, Renjuan / Wu, Xinsheng / Guan, Yanhua	Influence of ground waste clay brick on properties of fresh and hardened concrete	128-136
Hidallana-Gamage, H. D. / Thambiratnam, D. P. / Perera, N. J.	Influence of interlayer properties on the blast performance of laminated glass panels	502-518
Hemalatha, T. / Ram Sundar, K. R. / Murthy, A. Ramachandra / Iyer, Nagesh R.	Influence of mixing protocol on fresh and hardened properties of self-compacting concrete	119-127
Zhang, Henglong / Zhu, Chongzheng / Yu, Jianying / Shi, Caijun / Zhang, Dongmei	Influence of surface modification on physical and ultraviolet aging resistance of bitumen containing inorganic nanoparticles	735-740
Grabiec, Anna M. / Zawal, Daniel / Szulc, Jakub	Influence of type and maximum aggregate size on some properties of high-strength concrete made of pozzolana cement in respect of binder and carbon dioxide intensity indexes	17-24
Ince, Ceren / Derogar, Shahram / Tiryakioğlu, Nesrin Yardımcı / Toklu, Y. Cengiz	The influence of zeolite and powdered Bayburt stones on the water transport kinetics and mechanical properties of hydrated lime mortars	345-352
Yang, Bohan / Weng, Xingzhong	The influence on the durability of semi-flexible airport pavement materials to cyclic wheel load test	171-175
Zheng, Keren / Zhou, Jin / Gbozee, Mulbah	Influences of phosphate tailings on hydration and properties of Portland cement	593-601
Xu, Ouming / Han, Sen / Zhang, Caili / Liu, Yamin / Xiao, Feipeng / Xu, Jin	Laboratory investigation of andesite and limestone asphalt mixtures containing sodium chloride-based anti-icing filler	671-677
Ortiz, R. / Ortiz, P. / Colao, F. / Fantoni, R. / Gómez-Morón, M. A. / Vázquez, M. A.	Laser spectroscopy and imaging applications for the study of cultural heritage murals	35-43
Mueller, A. / Schnell, A. / Ruebner, K.	The manufacture of lightweight aggregates from recycled masonry rubble	376-387
Zhong, Rui / Wille, Kay	Material design and characterization of high performance pervious concrete	51-60
Araujo, Victor M. C. / Bessa, Iuri S. / Castelo Branco, Verônica T. F.	Measuring skid resistance of hot mix asphalt using the aggregate image measurement system (AIMS)	476-481
Rasheed, Mohammad Abdur / Prakash, S. Suriya	Mechanical behavior of sustainable hybrid-synthetic fiber reinforced cellular light weight concrete for structural applications of masonry	631-640
Ferretti, Daniele / Michelini, Elena / Rosati, Gianpaolo	Mechanical characterization of autoclaved aerated concrete masonry subjected to in-plane loading: Experimental investigation and FE modeling	353-365
Sgobba, Sara / Borsa, Massimo / Molfetta, Marcello / Marano, Giuseppe Carlo	Mechanical performance and medium-term degradation of rubberised concrete	820-831
Okoye, F. N. / Durgaprasad, J. / Singh, N. B.	Mechanical properties of alkali activated flyash/Kaolin based geopolymer concrete	685-691
Iqbal, Shahid / Ali, Ahsan / Holschemacher, Klaus / Bier, Thomas A.	Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)	325-333
Si, Wei / Zhou, Xue-yan / Ma, Biao / Li, Ning / Ren, Jun-ping / Chang, Yu-jiao	The mechanism of different thermoregulation types of composite shape-stabilized phase change materials used in asphalt pavement	547-558
Zhang, Weiping / Min, Hongguang / Gu, Xianglin / Xi, Yunping / Xing, Yishan	Mesoscale model for thermal conductivity of concrete	8-16
Kim, Baek-Joong / Yi, Chongku / Kang, Kyung-In	Microwave curing of alkali-activated binder using hwangtoh without calcination	465-475
Gaspar, Florindo / Cruz, Helena / Gomes, Augusto	Modeling the influence of delamination on the mechanical performance of straight glued laminated timber beams	447-455
García, Álvaro / Hassn, Abdushaffi / Chiarelli, Andrea / Dawson, Andrew	Multivariable analysis of potential evaporation from moist asphalt mixture	80-88
Villegas, Laura / Moran, Richard / García, José Jaime	A new joint to assemble light structures of bamboo slats	61-68
Gómez-Meijide, B. / Pérez, I.	Nonlinear elastic behavior of bitumen emulsion-stabilized materials with C&D waste aggregates	853-863
Ahmed, N. M. / Mohamed, M. G. / Mabrouk, M. R. / ELShami, A. A.	Novel anticorrosive pigments based on waste material for corrosion protection of reinforced concrete steel	388-396
Erić, Suzana / Matović, Vesna / Kremenović, Aleksandar / Colomban, Philippe / Batoćanin, Danica Srećković / Nešković, Marina / Jelikić, Aleksa	The origin of Mg sulphate and other salts formed on pure calcium carbonate substrate – Tufa stone blocks built into the Gradac Monastery, Serbia	25-34
Wu, Jun / Liu, Xuemei / Chew, Soon Hoe	Parametric study on cement-based soft-hard-soft (SHS) multi-layer composite pavement against blast load	602-619
Yusuf, Moruf Olalekan	Performance of slag blended alkaline activated palm oil fuel ash mortar in sulfate environments	417-424
Liu, Zhichao / Hansen, Will	Pore damage in cementitious binders caused by deicer salt frost exposure	204-216
Al Aqtash, Umaima / Bandini, Paola	Prediction of unsaturated shear strength of an adobe soil from the soil–water characteristic curve	892-899
Escalera, E. / Garcia, G. / Terán, R. / Tegman, R. / Antti, M.-L. / Odén, M.	The production of porous brick material from diatomaceous earth and Brazil nut shell ash	257-264
Akça, Kutalmış Recep / Çakır, Özgür / Ipek, Metin	Properties of polypropylene fiber reinforced concrete using recycled aggregates	620-630
Petcherdchoo, Aruz	Repairs by fly ash concrete to extend service life of chloride-exposed concrete structures considering environmental impacts	799-809
Yu, Ke-Quan / Lu, Zhou-Dao / Yu, Jiangtao	Residual compressive properties of strain-hardening cementitious composite with different curing ages exposed to high temperature	146-155
Xiao, Feipeng / Putman, Bradley / Amirkhanian, Serji	Rheological characteristics investigation of high percentage RAP binders with WMA technology at various aging states	315-324
Lynn, Ciarán J. / Dhir, Ravindra K. / Ghataora, Gurmel S. / West, Roger P.	Sewage sludge ash characteristics and potential for use in concrete	767-779
Pisano, Gabriele / Royer Carfagni, Gianni	The statistical interpretation of the strength of float glass for structural applications	741-756
Kardos, Adam J. / Durham, Stephan A.	Strength, durability, and environmental properties of concrete utilizing recycled tire particles for pavement applications	832-845
Xue, Xiao / Yang, Jingna / Zhang, Weidong / Jiang, Lihong / Qu, Jian / Xu, Lijin / Zhang, Hongqiang / Song, Jianrong / Zhang, Rongpu / Li, Yanwen / Qin, Jie / Zhang, Ziying	The study of an energy efficient cool white roof coating based on styrene acrylate copolymer and cement for waterproofing purpose—Part I: Optical properties, estimated cooling effect and relevant properties after dirt and accelerated exposures	176-184
Feng, Huan / Pettinari, Matteo / Stang, Henrik	Study of normal and shear material properties for viscoelastic model of asphalt mixture by discrete element method	366-375
Liu, Peng / Yu, Zhiwu / Guo, Fengqi / Chen, Ying / Sun, Peiwei	Temperature response in concrete under natural environment	713-721
Shafabakhsh, G. H. / Faramarzi, M. / Sadeghnejad, M.	Use of Surface Free Energy method to evaluate the moisture susceptibility of sulfur extended asphalts modified with antistripping agents	456-464
Andreozzi, Laura / Briccoli Bati, Silvia / Fagone, Mario / Ranocchiai, Giovanna / Zulli, Fabio	Weathering action on thermo-viscoelastic properties of polymer interlayers for laminated glass	757-766
Chen, Caiyi / Ji, Tao / Zhuang, Yizhou / Lin, Xujian	Workability, mechanical properties and affinity of artificial reef concrete	227-236
Nadiv, Roey / Shtein, Michael / Peled, Alva / Regev, Oren	WS2 nanotube – Reinforced cement: Dispersion matters	112-118

About this
data sheet
IssueID
22574
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.