Construction and Building Materials - September 2014

Published:	September 2014

Articles in this Issue

Author(s)	Title	Page(s)
Kunieda, Minoru / Ueda, Naoshi / Nakamura, Hikaru	Ability of recycling on fiber reinforced concrete	315-320
Henry, Michael / Darma, Ivan Sandi / Sugiyama, Takafumi	Analysis of the effect of heating and re-curing on the microstructure of high-strength concrete using X-ray CT	37-46
Koshiro, Yasumichi / Ichise, Kenichi	Application of entire concrete waste reuse model to produce recycled aggregate class H	308-314
Kaloush, Kamil E.	Asphalt rubber: Performance tests and pavement design issues	258-264
Zanetti, Maria Chiara / Fiore, Silvia / Ruffino, Barbara / Santagata, Ezio / Lanotte, Michele	Assessment of gaseous emissions produced on site by bituminous mixtures containing crumb rubber	291-296
Müller, Harald S. / Haist, Michael / Vogel, Michael	Assessment of the sustainability potential of concrete and concrete structures considering their environmental impact, performance and lifetime	321-337
Yoda, Kazuhisa / Shintani, Akira	Building application of recycled aggregate concrete for upper-ground structural elements	379-385
Sakai, Koji	CBM-SP (ICCS13)	307
Sierra-Beltran, M. Guadalupe / Jonkers, H. M. / Schlangen, E.	Characterization of sustainable bio-based mortar for concrete repair	344-352
Yu, Xin / Leng, Zhen / Wang, Ying / Lin, Shiying	Characterization of the effect of foaming water content on the performance of foamed crumb rubber modified asphalt	279-284
Celik, Kemal / Meral, Cagla / Mancio, Mauricio / Mehta, P. Kumar / Monteiro, Paulo J. M.	A comparative study of self-consolidating concretes incorporating high-volume natural pozzolan or high-volume fly ash	14-19
Umemoto, S. / Tanoue, S. / Miyamoto, N. / Takaki, T. / Ishii, I. / Aoyama, T. / Fujii, K.	Concrete surface strain measurement using Moiré fringes	115-120
Suzuki, Tetsuya / Ohtsu, Masayasu	Damage estimation of concrete canal due to earthquake effects by acoustic emission method	186-191
Hooton, R. Doug / Bickley, John A.	Design for durability: The key to improving concrete sustainability	422-430
Kawai, Kenji / Hayashi, Akihiko / Kikuchi, Hiromitsu / Yokoyama, Shinya	Desorption properties of heavy metals from cement hydrates in various chloride solutions	55-60
Miyamoto, Shintaro / Minagawa, Hiroshi / Hisada, Makoto	Deterioration rate of hardened cement caused by high concentrated mixed acid attack	47-54
Rashadul Islam, Md / Tarefder, Rafiqul A.	Determining thermal properties of asphalt concrete using field data and laboratory testing	297-306
Higuchi, Takayuki / Morioka, Minoru / Yoshioka, Ichiro / Yokozeki, Kosuke	Development of a new ecological concrete with CO2 emissions below zero	338-343
Desai, Devki / Miller, Meredith / Lynch, Jerome P. / Li, Victor C.	Development of thermally adaptive Engineered Cementitious Composite for passive heat storage	366-372
Randl, N. / Steiner, T. / Ofner, S. / Baumgartner, E. / Mészöly, T.	Development of UHPC mixtures from an ecological point of view	373-378
Uenishi, Koji / Yamachi, Hiroshi / Yamagami, Keisho / Sakamoto, Ryo	Dynamic fragmentation of concrete using electric discharge impulses	170-179
Proske, Tilo / Hainer, Stefan / Rezvani, Moien / Graubner, Carl-Alexander	Eco-friendly concretes with reduced water and cement content – Mix design principles and application in practice	413-421
Chiaia, Bernardino / Fantilli, Alessandro P. / Guerini, Alexandre / Volpatti, Giovanni / Zampini, Davide	Eco-mechanical index for structural concrete	386-392
Alver, Ninel / Tanarslan, H. Murat / Sülün, Ömer Yasin / Ercan, Emre / Karcili, Mustafa / Selman, Efe / Ohno, Kentaro	Effect of CFRP-spacing on fracture mechanism of CFRP-strengthened reinforced concrete beam identified by AE-SiGMA	146-156
Xie, Zhaoxing / Shen, Junan	Effect of cross-linking agent on the properties of asphalt rubber	234-238
Xie, Jiting / Kayali, Obada	Effect of initial water content and curing moisture conditions on the development of fly ash-based geopolymers in heat and ambient temperature	20-28
Pang, Ling / Liu, Kuangyi / Wu, Shaopeng / Lei, Min / Chen, Zongwu	Effect of LDHs on the aging resistance of crumb rubber modified asphalt	239-243
Biligiri, Krishna Prapoorna / Kaloush, Kamil Elias	Effect of specimen geometries on asphalt mixtures' phase angle characteristics	249-257
Dijk, Maartje / Blom, Inge / Salet, Theo / Marinus, Patrick	Environmental impact as a parameter in concrete structure parametric associative models	360-365
Kawasaki, Yuma / Wasada, Shota / Okamoto, Takahisa / Izuno, Kazuyuki	Evaluation for RC specimen damaged from rebar corrosion by acoustic emission technique	157-164
Watanabe, Takeshi / Trang, Huynh Thi Huyen / Harada, Kazuki / Hashimoto, Chikanori	Evaluation of corrosion-induced crack and rebar corrosion by ultrasonic testing	197-201
Lagerblad, Björn / Gram, Hans-Erik / Westerholm, Mikael	Evaluation of the quality of fine materials and filler from crushed rocks in concrete production	121-126
Ueno, Atsushi / Kawai, Kenji / Kobayashi, Koichi / Tanaka, Satoshi	Evaluation of visual methods for CO2 uptake by demolished concrete: Research activities by JSCE subcommittee 219	393-398
Zhan, Baojian / Poon, Chi Sun / Liu, Qiong / Kou, Shicong / Shi, Caijun	Experimental study on CO2 curing for enhancement of recycled aggregate properties	3-7
Ogawa, Yu / Kawasaki, Yuma / Okamoto, Takahisa	Fracture behavior of RC members subjected to bending shear and torsion using acoustic emission method	165-169
Farhidzadeh, Alireza / Mpalaskas, Anastasios C. / Matikas, Theodore E. / Farhidzadeh, Hamidreza / Aggelis, Dimitrios G.	Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features	129-138
Ohno, Kentaro / Uji, Kimitaka / Ueno, Atsushi / Ohtsu, Masayasu	Fracture process zone in notched concrete beam under three-point bending by acoustic emission	139-145
Lee, Sanghun / Kamada, Toshiro / Uchida, Shinya / Linzell, Daniel	Imaging defects in concrete structures using accumulated SIBIE	180-185
Vázquez, Enric / Barra, Marilda / Aponte, Diego / Jiménez, Cristian / Valls, Susanna	Improvement of the durability of concrete with recycled aggregates in chloride exposed environment	61-67
van den Heede, Philip / Maes, Mathias / De Belie, Nele	Influence of active crack width control on the chloride penetration resistance and global warming potential of slabs made with fly ash+silica fume concrete	74-80
Villani, Chiara / Nantung, Tommy E. / Weiss, W. Jason	The influence of deicing salt exposure on the gas transport in cementitious materials	108-114
Ueda, Takao / Kushida, Junji / Tsukagoshi, Masayuki / Nanasawa, Akira	Influence of temperature on electrochemical remedial measures and complex deterioration due to chloride attack and ASR	81-87
Visser, J. H. M.	Influence of the carbon dioxide concentration on the resistance to carbonation of concrete	8-13
Behnia, A. / Chai, H. K. / Yorikawa, M. / Momoki, S. / Terazawa, M. / Shiotani, T.	Integrated non-destructive assessment of concrete structures under flexure by acoustic emission and travel time tomography	202-215
Abubaker, Farhat / Lynsdale, Cyril / Cripps, John	Investigation of concrete–clay interaction with regards to the thaumasite form of sulfate attack	88-94
Liu, Hongying / Chen, Zhijun / Wang, Wen / Wang, Hainian / Hao, Peiwen	Investigation of the rheological modification mechanism of crumb rubber modified asphalt (CRMA) containing TOR additive	225-233
Gandhi, Tejash / Wurst, Trey / Rice, Courtney / Milar, Brandon	Laboratory and field compaction of warm rubberized mixes	285-290
Manfroi, Eliz Paula / Cheriaf, Malik / Cavalcante Rocha, Janaíde	Microstructure, mineralogy and environmental evaluation of cementitious composites produced with red mud waste	29-36
Takahashi, Yuya / Ishida, Tetsuya	Modeling of coupled mass transport and chemical equilibrium in cement-solidified soil contaminated with heavy-metal ions	100-107
Ferrari, Giorgio / Miyamoto, Mitsuya / Ferrari, Alberto	New sustainable technology for recycling returned concrete	353-359
Ismail, Zainab Ziad / Jaeel, Ali J.	A novel use of undesirable wild giant reed biomass to replace aggregate in concrete	68-73
Tsuchiya, Naoko / Kanematsu, Manabu / Noguchi, Takafumi	Quick water movement around concrete cracks under unsaturated conditions	95-99
Shu, Xiang / Huang, Baoshan	Recycling of waste tire rubber in asphalt and portland cement concrete: An overview	217-224
Arifi, Eva / Ishimatsu, Koichi / Iizasa, Shinya / Namihira, Takao / Sakamoto, Hiroyuki / Tachi, Yukio / Kato, Hiroyasu / Shigeishi, Mitsuhiro	Reduction of contaminated concrete waste by recycling aggregate with the aid of pulsed power discharge	192-196
Zhang, Dong / Huang, Xiaoming / Zhao, Yongli / Zhang, Sulong	Rubberized asphalt mixture design using a theoretical model	265-269
Henry, Michael / Kato, Yoshitaka	Sustainable concrete in Asia: Approaches and barriers considering regional context	399-404
Banthia, Nemkumar / Zanotti, Cristina / Sappakittipakorn, Manote	Sustainable fiber reinforced concrete for repair applications	405-412
Lo Presti, Davide / Fecarotti, Claudia / Clare, Adam T. / Airey, Gordon	Toward more realistic viscosity measurements of tyre rubber–bitumen blends	270-278
Kim, Sungun / Lee, Sung-Jin / Yun, Yeo-Bin / Kim, Kwang W.	The use of CRM-modified asphalt mixtures in Korea: Evaluation of high and ambient temperature performance	244-248

About this
data sheet
IssueID
22543
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.