Construction and Building Materials - July 2013

Published:	July 2013

Articles in this Issue

Author(s)	Title	Page(s)
Hellebois, Armande / Launoy, Arnaud / Pierre, Christian / De Lanève, Michel / Espion, Bernard	100-year-old Hennebique concrete, from composition to performance	149-160
Andrejkovičová, Slávka / Velosa, Ana L. / Rocha, Fernando	Air lime–metakaolin–sepiolite mortars for earth based walls	133-141
Pérez, Pablo / Agrela, Francisco / Herrador, Rosario / Ordoñez, Javier	Application of cement-treated recycled materials in the construction of a section of road in Malaga, Spain	593-599
Pucinotti, R.	Assessment of in situ characteristic concrete strength	63-73
Lin, Xiaoshan / Zhang, Y. X.	Bond–slip behaviour of FRP-reinforced concrete beams	110-117
Panesar, D. K.	Cellular concrete properties and the effect of synthetic and protein foaming agents	575-584
Yao, Bo / Cheng, Gang / Wang, Xiao / Cheng, Cheng	Characterization of the stiffness of asphalt surfacing materials on orthotropic steel bridge decks using dynamic modulus test and flexural beam test	200-206
Wang, Zhendi / Zeng, Qiang / Wang, Ling / Yao, Yan / Li, Kefei	Characterizing blended cement pastes under cyclic freeze–thaw actions by electrical resistivity	477-486
Khmiri, A. / Chaabouni, M. / Samet, B.	Chemical behaviour of ground waste glass when used as partial cement replacement in mortars	74-80
Zhao, Sheng / Huang, Baoshan / Shu, Xiang / Woods, Mark	Comparative evaluation of warm mix asphalt containing high percentages of reclaimed asphalt pavement	92-100
Zhang, Jun / Alvarez, Allex E. / Lee, Sang Ick / Torres, Angela / Walubita, Lubinda F.	Comparison of flow number, dynamic modulus, and repeated load tests for evaluation of HMA permanent deformation	391-398
Buratti, N. / Ferracuti, B. / Savoia, M.	Concrete crack reduction in tunnel linings by steel fibre-reinforced concretes	249-259
Merzouki, Tarek / Bouasker, Marwen / Houda Khalifa, Nour El / Mounanga, Pierre	Contribution to the modeling of hydration and chemical shrinkage of slag-blended cement at early age	368-380
Rakanta, E. / Zafeiropoulou, Th. / Batis, G.	Corrosion protection of steel with DMEA-based organic inhibitor	507-513
Savija, Branko / Luković, Mladena / Pacheco, José / Schlangen, Erik	Cracking of the concrete cover due to reinforcement corrosion: A two-dimensional lattice model study	626-638
Aldahdooh, M. A. A. / Muhamad Bunnori, N. / Johari, M. A. Megat	Damage evaluation of reinforced concrete beams with varying thickness using the acoustic emission technique	812-821
Jiang, Jian-hua / Yuan, Ying-shu	Development and prediction strategy of steel corrosion rate in concrete under natural climate	287-292
Ma, Yijuan / Kim, Hyunwook / Kim, Intai / Cho, Yoon-Ho	Development of a mechanistic-empirical prediction model for joint spalling distress in concrete pavements	276-286
Huang, Xiaoyan / Ranade, Ravi / Ni, Wen / Li, Victor C.	Development of green engineered cementitious composites using iron ore tailings as aggregates	757-764
Assaad, Joseph Jean	Disposing used engine oils in concrete – Optimum dosage and compatibility with water reducers	734-742
Ahmari, Saeed / Zhang, Lianyang	Durability and leaching behavior of mine tailings-based geopolymer bricks	743-750
Leemann, A. / Lura, P.	E-modulus of the alkali–silica-reaction product determined by micro-indentation	221-227
Aktaş, Bekir / Karaşahin, Mustafa / Saltan, Mehmet / Gürer, Cahit / Uz, Volkan Emre	Effect of aggregate surface properties on chip seal retention performance	639-644
Al-Tersawy, Sherif H.	Effect of fiber parameters and concrete strength on shear behavior of strengthened RC beams	15-24
Zou, Jian / Isola, Marco / Roque, Reynaldo / Chun, Sanghyun / Koh, Chulseung / Lopp, George	Effect of hydrated lime on fracture performance of asphalt mixture	302-308
Ghorbel, Halima / Samet, Basma	Effect of iron on pozzolanic activity of kaolin	185-191
Ji, Tao / Chen, Cai-Yi / Chen, Yuan-Yuan / Zhuang, Yi-Zhou / Chen, Jian-Feng / Lin, Xu-jian	Effect of moisture state of recycled fine aggregate on the cracking resistibility of concrete	726-733
Courtial, M. / de Noirfontaine, M.-N. / Dunstetter, F. / Signes-Frehel, M. / Mounanga, P. / Cherkaoui, K. / Khelidj, A.	Effect of polycarboxylate and crushed quartz in UHPC: Microstructural investigation	699-705
Monosi, Saveria / Tittarelli, Francesca / Giosuè, Chiara / Ruello, Maria Letizia	Effect of two different sources and washing treatment on the properties of UFS by-products for mortar and concrete production	260-266
Mohd Hasan, Mohd Rosli / Eng, Jia Yih / Hamzah, Meor Othman / Voskuilen, J. L. M.	The effects of break point location and nominal maximum aggregate size on porous asphalt properties	360-367
Geng, Han / Clopotel, Cristian S. / Bahia, Hussain U.	Effects of high modulus asphalt binders on performance of typical asphalt pavement structures	207-213
Duan, Ping / Shui, Zhonghe / Chen, Wei / Shen, Chunhua	Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete	1-6
Yilmaz, Mehmet / Çeloğlu, Muhammed Ertuğrul	Effects of SBS and different natural asphalts on the properties of bituminous binders and mixtures	533-540
Sandoval, Cristián / Roca, Pere	Empirical equations for the assessment of the load-bearing capacity of brick masonry walls	427-439
Ismail, Sallehan / Ramli, Mahyuddin	Engineering properties of treated recycled concrete aggregate (RCA) for structural applications	464-476
Sadeghi Nik, Aref / Lotfi Omran, Omid	Estimation of compressive strength of self-compacted concrete with fibers consisting nano-SiO2 using ultrasonic pulse velocity	654-662
Bernat, Ernest / Gil, Lluís / Roca, Pere / Escrig, Christian	Experimental and analytical study of TRM strengthened brickwork walls under eccentric compressive loading	35-47
Dongsheng, Huang / Aiping, Zhou / Yuling, Bian	Experimental and analytical study on the nonlinear bending of parallel strand bamboo beams	585-592
Altun, Fatih / Tanrıöven, Fevzi / Dirikgil, Tamer	Experimental investigation of mechanical properties of hybrid fiber reinforced concrete samples and prediction of energy absorption capacity of beams by fuzzy-genetic model	565-574
Wang, Huanzi / Belarbi, Abdeldjelil	Flexural durability of FRP bars embedded in fiber-reinforced-concrete	541-550
Ganesan, N. / Bharati Raj, J. / Shashikala, A. P.	Flexural fatigue behavior of self compacting rubberized concrete	7-14
Mahdi, Fareed / Abbas, H. / Khan, Asif Ali	Flexural, shear and bond strength of polymer concrete utilizing recycled resin obtained from post consumer PET bottles	798-811
Pia, Giorgio / Sanna, Ulrico	A geometrical fractal model for the porosity and thermal conductivity of insulating concrete	551-556
Akca, Abdullah Huzeyfe / Özyurt Zihnioğlu, Nilüfer	High performance concrete under elevated temperatures	317-328
Oliveira, R. / de Brito, J. / Veiga, R.	Incorporation of fine glass aggregates in renderings	329-341
Sim, Jae-Il / Yang, Keun-Hyeok / Jeon, Joong-Kyu	Influence of aggregate size on the compressive size effect according to different concrete types	716-725
Nassif, Ayman Y. / Petrou, Michael F.	Influence of cold weather during casting and curing on the stiffness and strength of concrete	161-167
Arega, Zelalem A. / Bhasin, Amit / De Kesel, Tom	Influence of extended aging on the properties of asphalt composites produced using hot and warm mix methods	168-174
Haneef, T. K. / Kumari, Kalpana / Mukhopadhyay, C. K. / Rao, B. Purnachandra / Jayakumar, T.	Influence of fly ash and curing on cracking behavior of concrete by acoustic emission technique	342-350
Yuzer, Nabi / Cinar, Zekiye / Aköz, Fevziye / Biricik, Hasan / Yalcin Gurkan, Yelda / Kabay, Nihat / Kizilkanat, Ahmet B.	Influence of raw rice husk addition on structure and properties of concrete	54-62
Duan, Ping / Shui, Zhonghe / Chen, Wei / Shen, Chunhua	Influence of superplasticizer on composition and pore structure of C–S–H	87-91
Tercelj, M. / Fazarinc, M. / Kugler, G. / Peruš, I.	Influence of the chemical composition and process parameters on the mechanical properties of an extruded aluminium alloy for highly loaded structural parts	781-791
Starinieri, V. / Hughes, D. C. / Wilk, D.	Influence of the combination of Roman cement and lime as the binder phase in render mortars for restoration	192-199
Graham, Ryan K. / Huang, Baoshan / Shu, Xiang / Burdette, Edwin G.	Laboratory evaluation of tensile strength and energy absorbing properties of cement mortar reinforced with micro- and meso-sized carbon fibers	751-756
Hafeez, I. / Kamal, M. A. / Mirza, M. W. / Bilal, S.	Laboratory fatigue performance evaluation of different field laid asphalt mixtures	792-797
Toraldo, Emanuele / Brovelli, Claudio / Mariani, Edoardo	Laboratory investigation into the effects of working temperatures on wax-based warm mix asphalt	774-780
Ramezanianpour, A. A. / Esmaeili, M. / Ghahari, S. A. / Najafi, M. H.	Laboratory study on the effect of polypropylene fiber on durability, and physical and mechanical characteristic of concrete for application in sleepers	411-418
Sayyar, Mohammad / Soroushian, Parviz / Sadiq, Muhammad Maqbool / Balachandra, Anagi / Lu, Jue	Low-cost glass fiber composites with enhanced alkali resistance tailored towards concrete reinforcement	458-463
Sabet, Fereshteh Alsadat / Libre, Nicolas Ali / Shekarchi, Mohammad	Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash	175-184
Chavooshi, Arash / Madhoushi, Mehrab	Mechanical and physical properties of aluminum powder/MDF dust/polypropylene composites	214-220
Torrijos, M. C. / Giaccio, G. / Zerbino, R.	Mechanical and transport properties of 10years old concretes prepared with different coarse aggregates	706-715
Tomasi, Roberto / Sartori, Tiziano	Mechanical behaviour of connections between wood framed shear walls and foundations under monotonic and cyclic load	682-690
Matias, D. / de Brito, J. / Rosa, A. / Pedro, D.	Mechanical properties of concrete produced with recycled coarse aggregates – Influence of the use of superplasticizers	101-109
Coleri, Erdem / Harvey, John T. / Yang, Kai / Boone, John M.	Micromechanical investigation of open-graded asphalt friction courses' rutting mechanisms	25-34
Ji, Tao / Chen, Cai-Yi / Zhuang, Yi-Zhou / Chen, Jian-Feng	A mix proportion design method of manufactured sand concrete based on minimum paste theory	422-426
Głodkowska, Wiesława / Kobaka, Janusz	Modelling of properties and distribution of steel fibres within a fine aggregate concrete	645-653
Burciaga-Díaz, O. / Díaz-Guillén, M. R. / Fuentes, A. F. / Escalante-García, J. I.	Mortars of alkali-activated blast furnace slag with high aggregate:binder ratios	607-614
Raposeiras, A. C. / Vega-Zamanillo, A. / Calzada-Pérez, M. A. / Castro-Fresno, D.	New procedure to control the tack coat applied between bituminous pavement layers	228-235
Chen, Bing / Liu, Ning	A novel lightweight concrete-fabrication and its thermal and mechanical properties	691-698
Tapkin, Serkan	Optimal polypropylene fiber amount determination by using gyratory compaction, static creep and Marshall stability and flow analyses	399-410
Connolly, D. / Giannopoulos, A. / Fan, W. / Woodward, P. K. / Forde, M. C.	Optimising low acoustic impedance back-fill material wave barrier dimensions to shield structures from ground borne high speed rail vibrations	557-564
Kim, Jin-Sup / Jung, Woo-Young / Kwon, Min-Ho / Ju, Bu-Seog	Performance evaluation of the post-installed anchor for sign structure in South Korea	496-506
Krishnan, Padmaja / Zhang, Min-Hong / Yu, Liya / Feng, Huajun	Photocatalytic degradation of particulate pollutants and self-cleaning performance of TiO2-containing silicate coating and mortar	309-316
Ge, Zhi / Sun, Renjuan / Zhang, Kun / Gao, Zhili / Li, Pengcheng	Physical and mechanical properties of mortar using waste Polyethylene Terephthalate bottles	81-86
Benedetto, A. / Calvi, A.	A pilot study on microwave heating for production and recycling of road pavement materials	351-359
Ashtiani, Mohammad Soleymani / Dhakal, Rajesh P. / Scott, Allan N.	Post-yield bond behaviour of deformed bars in high-strength self-compacting concrete	236-248
Ghafoori, Nader / Najimi, Meysam / Sobhani, Jafar / Aqel, Mohammad A.	Predicting rapid chloride permeability of self-consolidating concrete: A comparative study on statistical and neural network models	381-390
Rashad, Alaa M.	A preliminary study on the effect of fine aggregate replacement with metakaolin on strength and abrasion resistance of concrete	487-495
Xiao, Y. / Yang, R. Z. / Shan, B.	Production, environmental impact and mechanical properties of glubam	765-773
Kennedy, J. / Woodward, P. K. / Medero, G. / Banimahd, M.	Reducing railway track settlement using three-dimensional polyurethane polymer reinforcement of the ballast	615-625
Medeiros, M. H. F. / Gobbi, A. / Réus, G. C. / Helene, P.	Reinforced concrete in marine environment: Effect of wetting and drying cycles, height and positioning in relation to the sea shore	452-457
Morel, J. C. / Aubert, J. E. / Millogo, Y. / Hamard, E. / Fabbri, A.	Some observations about the paper "Earth construction: Lessons from the past for future eco-efficient construction" by F. Pacheco-Torgal and S. Jalali	419-421
Sun, Jing	Strength criterion for ecological light porous concrete under multiaxial stress	663-670
Tsesarsky, Michael / Peled, Alva / Katz, Amnon / Anteby, Ido	Strengthening concrete elements by confinement within textile reinforced concrete (TRC) shells – Static and impact properties	514-523
Preteseille, Mathieu / Lenoir, Thomas / Hornych, Pierre	Sustainable upgrading of fine-grained soils present in the right-of-way of High Speed Rail projects	48-53
Chen, H. H. / Su, R. K. L.	Tension softening curves of plain concrete	440-451
Brnić, Josip / Turkalj, Goran / Lanc, Domagoj / Canadija, Marko / Brčić, Marino / Vukelic, Goran / Munjas, Neven	Testing and analysis of X39CrMo17-1 steel properties	293-301
Fang, Qin / Zhang, Jinhua	Three-dimensional modelling of steel fiber reinforced concrete material under intense dynamic loading	118-132
Şanal, İrem / Özyurt Zihnioğlu, Nilüfer	To what extent does the fiber orientation affect mechanical performance?	671-681
Etxeberria, Miren / Ainchil, Javier / Pérez, Ma Eugenia / González, Alain	Use of recycled fine aggregates for Control Low Strength Materials (CLSMs) production	142-148
Duan, Z. H. / Kou, S. C. / Poon, C. S.	Using artificial neural networks for predicting the elastic modulus of recycled aggregate concrete	524-532
Yang, Lin / Yan, Yun / Hu, Zhihua	Utilization of phosphogypsum for the preparation of non-autoclaved aerated concrete	600-606
Xie, Haibo / Liu, Feng / Fan, Yurun / Yang, Huayong / Chen, Jian / Zhang, Jin / Zuo, Chungen	Workability and proportion design of pumping concrete based on rheological parameters	267-275

About this
data sheet
IssueID
22510
Published on:
16/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - July 2013

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - July 2013

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.