Construction and Building Materials - May 2013

Published:	May 2013

Author(s)	Title	Page(s)
Haurie, L. / Lacasta, A. M. / Ciudad, A. / Realinho, V. / Velasco, J. I.	Addition of flame retardants in epoxy mortars: Thermal and mechanical characterization	266-270
Ciancio, Daniela / Jaquin, Paul / Walker, Peter	Advances on the assessment of soil suitability for rammed earth	40-47
Alves, R. J. / Magalhaes, M. D. C. / Carrasco, E. V. M.	Determination of the transverse Young's modulus (TYM) of wood by means of an input power technique	11-21
Ali, Majid / Briet, Romain / Chouw, Nawawi	Dynamic response of mortar-free interlocking structures	168-189
Yazıcı, Halit / Deniz, Engin / Baradan, Bülent	The effect of autoclave pressure, temperature and duration time on mechanical properties of reactive powder concrete	53-63
Wang, Fazhou / Liu, Yunpeng / Hu, Shuguang	Effect of early cement hydration on the chemical stability of asphalt emulsion	146-151
Sisomphon, K. / Çopuroğlu, O. / Koenders, E. A. B.	Effect of exposure conditions on self healing behavior of strain hardening cementitious composites incorporating various cementitious materials	217-224
Alataş, Taner / Yilmaz, Mesude	Effects of different polymers on mechanical properties of bituminous binders and hot mixtures	161-167
Kwan, A. K. H. / Li, Y.	Effects of fly ash microsphere on rheology, adhesiveness and strength of mortar	137-145
Ikotun, B. D. / Afolabi, A. S.	Electrochemical behaviour of an austenitic stainless steel reinforced concrete in the presence of starch and cellulose admixtures	22-28
López, Gamaliel / Basterra, Luis Alfonso / Acuña, Luis	Estimation of wood density using infrared thermography	29-32
Moriyoshi, Akihiro / Jin, Toshiro / Nakai, Takaaki / Ishikawa, Hiroshi	Evaluation methods for porous asphalt pavement in service for fourteen years	190-195
Gallego, Juan / del Val, Miguel A. / Contreras, Verónica / Paez, Antonio	Heating asphalt mixtures with microwaves to promote self-healing	1-4
Hadiwardoyo, Sigit Pranowo / Sinaga, Eky Supriadi / Fikri, Husnul	The influence of Buton asphalt additive on skid resistance based on penetration index and temperature	5-10
Heap, M. J. / Lavallée, Y. / Laumann, A. / Hess, K.-U. / Meredith, P. G. / Dingwell, D. B. / Huismann, S. / Weise, F.	The influence of thermal-stressing (up to 1000°C) on the physical, mechanical, and chemical properties of siliceous-aggregate, high-strength concrete	248-265
Hounsi, Ayi D. / Lecomte-Nana, Gisèle L. / Djétéli, Gnandé / Blanchart, Philippe	Kaolin-based geopolymers: Effect of mechanical activation and curing process	105-113
Demir, İlhami / Arslan, Metin	The mechanical and microstructural properties of Li2SO4, LiNO3, Li2CO3 and LiBr added mortars exposed to alkali-silica reaction	64-77
Kan, Yu-Cheng / Chen, L.-H. / Yen, Tson	Mechanical behavior of lightweight concrete steel deck	78-86
Sadrmomtazi, A. / Sobhani, J. / Mirgozar, M. A.	Modeling compressive strength of EPS lightweight concrete using regression, neural network and ANFIS	205-216
Jamali, Amin / Angst, Ueli / Adey, Bryan / Elsener, Bernhard	Modeling of corrosion-induced concrete cover cracking: A critical analysis	225-237
Ji, Gefu / Li, Guoqiang / Alaywan, Walid	A new fire resistant FRP for externally bonded concrete repair	87-96
Celebi, E. / Kırtel, O.	Non-linear 2-D FE modeling for prediction of screening performance of thin-walled trench barriers in mitigation of train-induced ground vibrations	122-131
Ma, Biao / Adhikari, Sanjeev / Chang, Yujiao / Ren, Junping / Liu, Jiang / You, Zhanping	Preparation of composite shape-stabilized phase change materials for highway pavements	114-121
Sata, Vanchai / Wongsa, Ampol / Chindaprasirt, Prinya	Properties of pervious geopolymer concrete using recycled aggregates	33-39
Alsayed, Saleh H. / Siddiqui, Nadeem A.	Reliability of shear-deficient RC beams strengthened with CFRP-strips	238-247
Xue, James / Shinozuka, Masanobu	Rubberized concrete: A green structural material with enhanced energy-dissipation capability	196-204
Chen, Yu / Wang, Kejin / Wang, Xuhao / Zhou, Wenfang	Strength, fracture and fatigue of pervious concrete	97-104
Wang, Her-Yung / Lin, Chih-Chung	A study of fresh and engineering properties of self-compacting high slag concrete (SCHSC)	132-136
Arteaga-Arcos, Juan Carlos / Chimal-Valencia, Obed Arnoldo / Yee-Madeira, Hernani Tiago / Díaz de la Torre, Sebastián	The usage of ultra-fine cement as an admixture to increase the compressive strength of Portland cement mortars	152-160
Issa, Camille A. / Salem, George	Utilization of recycled crumb rubber as fine aggregates in concrete mix design	48-52

Author(s)

Title

Page(s)

Haurie, L. / Lacasta, A. M. / Ciudad, A. / Realinho, V. / Velasco, J. I.

Addition of flame retardants in epoxy mortars: Thermal and mechanical characterization

266-270

Ciancio, Daniela / Jaquin, Paul / Walker, Peter

Advances on the assessment of soil suitability for rammed earth

40-47

Alves, R. J. / Magalhaes, M. D. C. / Carrasco, E. V. M.

Determination of the transverse Young's modulus (TYM) of wood by means of an input power technique

11-21