Construction and Building Materials - March 2012

Published:	March 2012

Articles in this Issue

Author(s)	Title	Page(s)
Singh, Gurpreet / Siddique, Rafat	Abrasion resistance and strength properties of concrete containing waste foundry sand (WFS)	421-426
Van Tittelboom, Kim / De Belie, Nele / Lehmann, Frank / Grosse, Christian U.	Acoustic emission analysis for the quantification of autonomous crack healing in concrete	333-341
Bilim, Cahit / Atis, Cengiz Duran	Alkali activation of mortars containing different replacement levels of ground granulated blast furnace slag	708-712
Chang, Xu / Wei, You-Yi / Yun, Yan-Chun	Analysis of steel-reinforced concrete-filled-steel tubular (SRCFST) columns under cyclic loading	88-95
Alvarez, Allex E. / Ovalles, Evelyn / Caro, Silvia	Assessment of the effect of mineral filler on asphalt–aggregate interfaces based on thermodynamic properties	599-606
Caspeele, Robby / Taerwe, Luc	Bayesian assessment of the characteristic concrete compressive strength using combined vague–informative priors	342-350
Chen, G. M. / Chen, J. F. / Teng, J. G.	Behaviour of FRP-to-concrete interfaces between two adjacent cracks: A numerical investigation on the effect of bondline damage	584-591
Yi, Na-Hyun / Kim, Jang-Ho Jay / Han, Tong-Seok / Cho, Yun-gu / Lee, Jang Hwa	Blast-resistant characteristics of ultra-high strength concrete and reactive powder concrete	694-707
Valença, J. / Dias-Da-Costa, D. / Júlio, E. N. B. S.	Characterisation of concrete cracking during laboratorial tests using image processing	607-615
Cerni, G. / Cardone, F. / Virgili, A. / Camilli, S.	Characterisation of permanent deformation behaviour of unbound granular materials under repeated triaxial loading	79-87
Djaknoun, S. / Ouedraogo, E. / Ahmed Benyahia, A.	Characterisation of the behaviour of high performance mortar subjected to high temperatures	176-186
Liu, Zanqun / Deng, Dehua / De Schutter, Geert / Yu, Zhiwu	Chemical sulfate attack performance of partially exposed cement and cement+fly ash paste	230-237
Tkaczewska, E. / Mróz, R. / Łój, G.	Coal–biomass fly ashes for cement production of CEM II/A-V 42.5R	633-639
Garcia, David / San-José, José T. / Garmendia, Leire / Larrinaga, Pello	Comparison between experimental values and standards on natural stone masonry mechanical properties	444-449
Alvarez, Allex E. / Fernandez, Elvia M. / Martin, Amy Epps / Reyes, Oscar J. / Simate, Geoffrey S. / Walubita, Lubinda F.	Comparison of permeable friction course mixtures fabricated using asphalt rubber and performance-grade asphalt binders	427-436
Jankovic, Ksenija / Nikolic, Dragan / Bojovic, Dragan	Concrete paving blocks and flags made with crushed brick as aggregate	659-663
Calabi-Floody, Alejandra / Thenoux, Guillermo	Controlling asphalt aging by inclusion of byproducts from red wine industry	616-623
Tregger, Nathan / Gregori, Amedeo / Ferrara, Liberato / Shah, Surendra	Correlating dynamic segregation of self-consolidating concrete to the slump-flow test	499-505
Dong, ShiGang / Zhao, Bing / Lin, ChangJian / Du, RongGui / Hu, RongGang / Zhang, Gregory Xiaoge	Corrosion behavior of epoxy/zinc duplex coated rebar embedded in concrete in ocean environment	72-78
Alhozaimy, Abdulrahman / Hussain, Raja Rizwan / Al-Zaid, Rajeh / Al-Negheimish, Abdulaziz	Coupled effect of ambient high relative humidity and varying temperature marine environment on corrosion of reinforced concrete	670-679
Khadraoui, Fouzia	Creep and shrinkage behaviour of CFRP-reinforced mortar	282-286
Khmiri, A. / Samet, B. / Chaabouni, M.	A cross mixture design to optimise the formulation of a ground waste glass blended cement	680-686
Ustabas, Ilker	The effect of capillarity on chloride transport and the prediction of the accumulation region of chloride in concretes with reinforcement corrosion	640-647
Kadhim, Majid Mohammed Ali	Effect of CFRP plate length strengthening continuous steel beam	648-652
Yan, Dongming / Reis, Signo / Tao, Xing / Chen, Genda / Brow, Richard K. / Koenigstein, Mike	Effect of chemically reactive enamel coating on bonding strength at steel/mortar interface	512-518
Lanzón, Marcos / García-Ruiz, P. A.	Effect of citric acid on setting inhibition and mechanical properties of gypsum building plasters	506-511
Zeng, Qiang / Li, Kefei / Fen-chong, Teddy / Dangla, Patrick	Effect of porosity on thermal expansion coefficient of cement pastes and mortars	468-475
Pereira, P. / Evangelista, L. / de Brito, J.	The effect of superplasticisers on the workability and compressive strength of concrete made with fine recycled concrete aggregates	722-729
Ling, Tung-Chai	Effects of compaction method and rubber content on the properties of concrete paving blocks	164-175
Shatanawi, Khaldoun M. / Biro, Szabolcs / Geiger, Andras / Amirkhanian, Serji N.	Effects of furfural activated crumb rubber on the properties of rubberized asphalt	96-103
Lee, Chih-Hsuan / Chung, Min-Jay / Lin, Chih-Hsien / Yang, Te-Hsin	Effects of layered structure on the physical and mechanical properties of laminated moso bamboo (Phyllosachys edulis) flooring	31-35
Ramli, Mahyuddin / Akhavan Tabassi, Amin	Effects of polymer modification on the permeability of cement mortars under different curing conditions: A correlational study that includes pore distributions, water absorption and compressive strength	561-570
Topçu, İlker Bekir / Uygunoğlu, Tayfun / Hocaoğlu, İsmail	Electrical conductivity of setting cement paste with different mineral admixtures	414-420
Liu, Lin / Sun, Wei / Ye, Guang / Chen, Huisu / Qian, Zhiwei	Estimation of the ionic diffusivity of virtual cement paste by random walk algorithm	405-413
Ji, Tao / Chen, Cai-Yi / Zhuang, Yi-Zhou	Evaluation method for cracking resistant behavior of reactive powder concrete	45-49
Miotto, José Luiz / Dias, Antonio Alves	Evaluation of perforated steel plates as connection in glulam–concrete composite structures	216-223
Lee, Cheng-Hsiao / Du, Jia-Chong / Shen, Der-hsien	Evaluation of pre-coated recycled concrete aggregate for hot mix asphalt	66-71
Pu, Qi / Jiang, Linhua / Xu, Jinxia / Chu, Hongqiang / Xu, Yi / Zhang, Yan	Evolution of pH and chemical composition of pore solution in carbonated concrete	519-524
Moussa, Omar / Vassilopoulos, Anastasios P. / Keller, Thomas	Experimental DSC-based method to determine glass transition temperature during curing of structural adhesives	263-268
Ciancio, Daniela / Gibbings, Joshua	Experimental investigation on the compressive strength of cored and molded cement-stabilized rammed earth samples	294-304
Al-Safy, Rawaa / Al-Mahaidi, Riadh / Simon, George P. / Habsuda, Jana	Experimental investigation on the thermal and mechanical properties of nanoclay-modified adhesives used for bonding CFRP to concrete substrates	769-778
Arnaud, Laurent / Gourlay, Etienne	Experimental study of parameters influencing mechanical properties of hemp concretes	50-56
Wei, Guofeng / Zhang, Hui / Wang, Hongmin / Fang, Shiqiang / Zhang, Bingjian / Yang, Fuwei	An experimental study on application of sticky rice–lime mortar in conservation of the stone tower in the Xiangji Temple	624-632
Wang, Fazhou / Liu, Yunpeng / Zhang, Yunhua / Hu, Shuguang	Experimental study on the stability of asphalt emulsion for CA mortar by laser diffraction technique	117-121
Arizzi, A. / Viles, H. / Cultrone, G.	Experimental testing of the durability of lime-based mortars used for rendering historic buildings	807-818
Kou, Shi-Cong / Zhan, Bao-Jian / Poon, Chi-Sun	Feasibility study of using recycled fresh concrete waste as coarse aggregates in concrete	549-556
Li, Xian / Lv, Henglin / Zhou, Shuchun	Flexural behavior of GFRP-reinforced concrete encased steel composite beams	255-262
Hashemi, S. / Al-Mahaidi, R.	Flexural performance of CFRP textile-retrofitted RC beams using cement-based adhesives at high temperature	791-797
Bruno, Leonardo / Parla, Giuseppe / Celauro, Clara	Image analysis for detecting aggregate gradation in asphalt mixture from planar images	21-30
Das, B. B. / Kondraivendhan, B.	Implication of pore size distribution parameters on compressive strength, permeability and hydraulic diffusivity of concrete	382-386
Yao, Yan / Zhu, Yu / Yang, Yingzi	Incorporation superabsorbent polymer (SAP) particles as controlling pre-existing flaws to improve the performance of engineered cementitious composites (ECC)	139-145
Chahal, Navneet / Siddique, Rafat / Rajor, Anita	Influence of bacteria on the compressive strength, water absorption and rapid chloride permeability of fly ash concrete	351-356
Valcuende, M. / Parra, C. / Marco, E. / Garrido, A. / Martínez, E. / Cánoves, J.	Influence of limestone filler and viscosity-modifying admixture on the porous structure of self-compacting concrete	122-128
Rong, Hui / Qian, Chun-xiang / Li, Long-zhi	Influence of molding process on mechanical properties of sandstone cemented by microbe cement	238-243
Liu, Tiejun / Zou, Dujian / Teng, Jun / Yan, Guilan	The influence of sulfate attack on the dynamic properties of concrete column	201-207
Raposeiras, Aitor C. / Vega-Zamanillo, Angel / Calzada-Perez, Miguel Angel / Castro-Fresno, Daniel	Influence of surface macro-texture and binder dosage on the adhesion between bituminous pavement layers	187-192
Tang, Yuming / Zhang, Guodong / Zuo, Yu	The inhibition effects of several inhibitors on rebar in acidified concrete pore solution	327-332
Akcay, Burcu / Agar-Ozbek, Ayda Safak / Bayramov, Fikret / Atahan, Hakan Nuri / Sengul, Cengiz / Tasdemir, Mehmet Ali	Interpretation of aggregate volume fraction effects on fracture behavior of concrete	437-443
Xu, Tao / Huang, Xiaoming	Investigation into causes of in-place rutting in asphalt pavement	525-530
Goodary, R. / Lecomte-nana, G. L. / Petit, C. / Smith, D. S.	Investigation of the strength development in cement-stabilised soils of volcanic origin	592-598
Zheng, Yu / Yu, Guoyou / Pan, Yunfeng	Investigation of ultimate strengths of concrete bridge deck slabs reinforced with GFRP bars	482-492
Kang, Su-Tae / Kim, Jin-Keun	Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution	57-65
Tironi, Alejandra / Trezza, Mónica A. / Scian, Alberto N. / Irassar, Edgardo F.	Kaolinitic calcined clays: Factors affecting its performance as pozzolans	276-281
Mahini, S. S. / Eslami, A. / Ronagh, H. R.	Lateral performance and load carrying capacity of an unreinforced, CFRP-retrofitted historical masonry vault – A case study	146-156
Gutiérrez-González, S. / Gadea, J. / Rodríguez, A. / Junco, C. / Calderón, V.	Lightweight plaster materials with enhanced thermal properties made with polyurethane foam wastes	653-658
Gunasekaran, K. / Annadurai, R. / Kumar, P. S.	Long term study on compressive and bond strength of coconut shell aggregate concrete	208-215
Wang, Zheng / Li, Ling / Gong, Meng	Measurement of dynamic modulus of elasticity and damping ratio of wood-based composites using the cantilever beam vibration technique	831-834
Akcay, Burcu / Tasdemir, Mehmet Ali	Mechanical behaviour and fibre dispersion of hybrid steel fibre reinforced self-compacting concrete	287-293
Lin, Feng / Hong, Li / Gu, Xianglin / Wang, Xiaolin / Jin, Xianyu	Mechanical behaviour of cast-in situ reinforced concrete slabs with control joints	395-404
Silveira, Dora / Varum, Humberto / Costa, Aníbal / Martins, Tiago / Pereira, Henrique / Almeida, João	Mechanical properties of adobe bricks in ancient constructions	36-44
Dawood, Eethar Thanon / Ramli, Mahyuddin	Mechanical properties of high strength flowing concrete with hybrid fibers	193-200
Felekoğlu, Burak	A method for improving the early strength of pumice concrete blocks by using alkyl alkoxy silane (AAS)	305-310
Kismi, Mohamed / Saint-Arroman, Jean-Claude / Mounanga, Pierre	Minimizing water dosage of superplasticized mortars and concretes for a given consistency	747-758
Dinis-Almeida, Marisa / Castro-Gomes, João / de Lurdes Antunes, Maria	Mix design considerations for warm mix recycled asphalt with bitumen emulsion	687-693
Mostofinejad, D. / Reisi, M. / Shirani, A.	Mix design effective parameters on γ-ray attenuation coefficient and strength of normal and heavyweight concrete	224-229
Khan, Mohammad Iqbal	Mix proportions for HPC incorporating multi-cementitious composites using artificial neural networks	14-20
Wang, Xiao-Yong / Lee, Han-Seung	Modeling of hydration kinetics in cement based materials considering the effects of curing temperature and applied pressure	1-13
Ludovico-Marques, Marco / Chastre, Carlos / Vasconcelos, Graça	Modelling the compressive mechanical behaviour of granite and sandstone historical building stones	372-381
Paton-Cole, Vidal P. / Gad, Emad F. / Clifton, Charles / Lam, Nelson T. K. / Davies, Carl / Hicks, Stephen	Out-of-plane performance of a brick veneer steel-framed house subjected to seismic loads	779-790
Lanzoni, L. / Nobili, A. / Tarantino, A. M.	Performance evaluation of a polypropylene-based draw-wired fibre for concrete structures	798-806
Limbachiya, Mukesh / Meddah, Mohammed Seddik / Fotiadou, Soumela	Performance of granulated foam glass concrete	759-768
Binici, Hanifi / Gemci, Remzi / Kaplan, Hasan	Physical and mechanical properties of mortars without cement	357-361
Santos, Teresa P. / Fátima Vaz, M. / Pinto, Moisés L. / Carvalho, Ana P.	Porosity characterization of old Portuguese ceramic tiles	104-110
Zhou, Shuguang / Zhang, Xun'an / Chen, Xinxiao	Pozzolanic activity of feedlot biomass (cattle manure) ash	493-498
Zhao, Yunliang / Zhang, Yimin / Chen, Tiejun / Chen, Yongliang / Bao, Shenxu	Preparation of high strength autoclaved bricks from hematite tailings	450-455
Chen, How-Ji / Yang, Ming-Der / Tang, Chao-Wei / Wang, Shun-Yuan	Producing synthetic lightweight aggregates from reservoir sediments	387-394
Uysal, Mucteba / Yilmaz, Kemalettin / Ipek, Metin	Properties and behavior of self-compacting concrete produced with GBFS and FA additives subjected to high temperatures	321-326
Nili, Mahmoud / Afroughsabet, Vahid	Property assessment of steel–fibre reinforced concrete made with silica fume	664-669
Baran, Eray / Akis, Tolga / Yesilmen, Seda	Pull-out behavior of prestressing strands in steel fiber reinforced concrete	362-371
Alwaeli, Mohamed / Nadziakiewicz, Jan	Recycling of scale and steel chips waste as a partial replacement of sand in concrete	157-163
Petchwattana, Nawadon / Covavisaruch, Sirijutaratana / Sanetuntikul, Jakkid	Recycling of wood–plastic composites prepared from poly(vinyl chloride) and wood flour	557-560
Hematabadi, H. / Behrooz, R. / Shakibi, A. / Arabi, M.	The reduction of indoor air formaldehyde from wood based composites using urea treatment for building materials	743-746
Xie, Jun / Xiao, Yue / Wu, Shaopeng / Huang, Junfeng	Research on fracture characteristic of gneiss prepared asphalt mixture with direct tensile test	476-481
Wu, Min / Johannesson, Björn / Geiker, Mette	A review: Self-healing in cementitious materials and engineered cementitious composite as a self-healing material	571-583
García-del-Cura, M. Ángeles / Benavente, David / Martínez-Martínez, Javier / Cueto, Nora	Sedimentary structures and physical properties of travertine and carbonate tufa building stone	456-467
Billah, A. H. M. Muntasir / Shahria Alam, M.	Seismic performance of concrete columns reinforced with hybrid shape memory alloy (SMA) and fiber reinforced polymer (FRP) bars	730-742
Ray, Indrajit / Gong, Zhiguo / Davalos, Julio F. / Kar, Arkamitra	Shrinkage and cracking studies of high performance concrete for bridge decks	244-254
Barbudo, A. / Agrela, F. / Ayuso, J. / Jiménez, J. R. / Poon, C. S.	Statistical analysis of recycled aggregates derived from different sources for sub-base applications	129-138
González-Fonteboa, Belén / Martínez-Abella, Fernando / Herrador, Manuel F. / Seara-Paz, Sindy	Structural recycled concrete: Behaviour under low loading rate	111-116
Vasudevan, R. / Ramalinga Chandra Sekar, A. / Sundarakannan, B. / Velkennedy, R.	A technique to dispose waste plastics in an ecofriendly way – Application in construction of flexible pavements	311-320
You, Taesun / Abu Al-Rub, Rashid K. / Darabi, Masoud K. / Masad, Eyad A. / Little, Dallas N.	Three-dimensional microstructural modeling of asphalt concrete using a unified viscoelastic–viscoplastic–viscodamage model	531-548
Okay, Fuad / Engin, Serkan	Torsional behavior of steel fiber reinforced concrete beams	269-275
Meshgin, Pania / Xi, Yunping / Li, Yue	Utilization of phase change materials and rubber particles to improve thermal and mechanical properties of mortar	713-721

About this
data sheet
IssueID
22494
Published on:
16/12/2018
Last updated on:
26/07/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - March 2012

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - March 2012

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.