Construction and Building Materials - v. 25, n. 10 (October 2011)

Published:	October 2011

Articles in this Issue

Author(s)	Title	Page(s)
Golroo, Amir / Tighe, Susan L.	Alternative modeling framework for pervious concrete pavement condition analysis	4043-4051
Bhatti, Abdul Qadir / Kishi, Norimitsu	An application of impact-response analysis on small-scale RC arch-type beams without stirrups	3972-3976
López-Gayarre, F. / López-Colina, C. / Serrano-López, M. A. / García Taengua, E. / López Martínez, A.	Assessment of properties of recycled concrete by means of a highly fractioned factorial design of experiment	3802-3809
Ozsayin, Berk / Yilmaz, Emre / Ispir, Medine / Özkaynak, Hasan / Yuksel, Ercan / Ilki, Alper	Characteristics of CFRP retrofitted hollow brick infill walls of reinforced concrete frames	4017-4024
Abosrra, L. / Ashour, A. F. / Youseffi, M.	Corrosion of steel reinforcement in concrete of different compressive strengths	3915-3925
Li, Fumin / Yuan, Yingshu / Li, Chun-Qing	Corrosion propagation of prestressing steel strands in concrete subject to chloride attack	3878-3885
Raut, S. P. / Ralegaonkar, R. V. / Mandavgane, S. A.	Development of sustainable construction material using industrial and agricultural solid waste: A review of waste-create bricks	4037-4042
Hamoush, Sameer / Abu-Lebdeh, Taher / Picornell, Miguel / Amer, Salah	Development of sustainable engineered stone cladding for toughness, durability, and energy conservation	4006-4016
Vlahovic, Milica M. / Martinovic, Sanja P. / Boljanac, Tamara Dj. / Jovanic, Predrag B. / Volkov-Husovic, Tatjana D.	Durability of sulfur concrete in various aggressive environments	3926-3934
Vu, Xuan Hong / Daudeville, Laurent / Malecot, Yann	Effect of coarse aggregate size and cement paste volume on concrete behavior under high triaxial compression loading	3941-3949
Soutsos, Marios N. / Tang, Kangkang / Khalid, Hussain A. / Millard, Stephen G.	The effect of construction pattern and unit interlock on the structural behaviour of block pavements	3832-3840
Akçaözoğlu, Semiha / Atis, Cengiz Duran	Effect of Granulated Blast Furnace Slag and fly ash addition on the strength properties of lightweight mortars containing waste PET aggregates	4052-4058
Bondar, Dali / Lynsdale, C. J. / Milestone, N. B. / Hassani, N. / Ramezanianpour, A. A.	Effect of heat treatment on reactivity-strength of alkali-activated natural pozzolans	4065-4071
Shebl, S. S. / Seddeq, H. S. / Aglan, H. A.	Effect of micro-silica loading on the mechanical and acoustic properties of cement pastes	3903-3908
Siddique, Rafat / Chahal, Navneet Kaur	Effect of ureolytic bacteria on concrete properties	3791-3801
Khan, Tabrez Alam / Sharma, D. K.	Effect of waste polymer modifier on the properties of bituminous concrete mixes	3841-3848
Malaiškienė, J. / Vaičienė, M. / Žurauskienė, R.	Effectiveness of technogenic waste usage in products of building ceramics and expanded clay concrete	3869-3877
Berndt, M. L.	Evaluation of coatings, mortars and mix design for protection of concrete against sulphur oxidising bacteria	3893-3902
Miró, Rodrigo / Valdés, Gonzalo / Martínez, Adriana / Segura, Pilar / Rodríguez, Celestino	Evaluation of high modulus mixture behaviour with high reclaimed asphalt pavement (RAP) percentages for sustainable road construction	3854-3862
Arslan, Deniz / Gürü, Metin / Çubuk, M. Kürşat / Çubuk, Meltem	Improvement of bitumen and bituminous mixtures performances by triethylene glycol based synthetic polyboron	3863-3868
Liu, Zhiyong / Zhang, Yunsheng / Jiang, Qian / Sun, Guowen / Zhang, Wenhua	In situ continuously monitoring the early age microstructure evolution of cementitious materials using ultrasonic measurement	3998-4005
Halicka, Anna	Influence new-to-old concrete interface qualities on the behaviour of support zones of composite concrete beams	4072-4078
Li, Beixing / Ke, Guoju / Zhou, Mingkai	Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concrete	3849-3853
Agrela, F. / Sánchez de Juan, M. / Ayuso, J. / Geraldes, V. L. / Jiménez, J. R.	Limiting properties in the characterisation of mixed recycled aggregates for use in the manufacture of concrete	3950-3955
Annerel, E. / Taerwe, L.	Methods to quantify the colour development of concrete exposed to fire	3989-3997
Erdem, Savaş / Dawson, Andrew Robert / Thom, Nicholas Howard	Microstructure-linked strength properties and impact response of conventional and recycled concrete reinforced with steel and synthetic macro fibres	4025-4036
Chen, Shyh-Haur / Chang, Chao-Shun / Wang, Her-Yung / Huang, Wei-Lun	Mixture design of high performance recycled liquid crystal glasses concrete (HPGC)	3886-3892
Sun, Guowen / Zhang, Yunsheng / Sun, Wei / Liu, Zhiyong / Wang, Caihui	Multi-scale prediction of the effective chloride diffusion coefficient of concrete	3820-3831
Toribio, J. / Kharin, V. / Ayaso, F. J. / González, B. / Matos, J. C. / Vergara, D. / Lorenzo, M.	Numerical and experimental analyses of the plasticity-induced fatigue crack growth in high-strength steels	3935-3940
Chen, Meizhu / Lin, Juntao / Wu, Shaopeng	Potential of recycled fine aggregates powder as filler in asphalt mixture	3909-3914
Abukersh, S. A. / Fairfield, C. A.	Recycled aggregate concrete produced with red granite dust as a partial cement replacement	4088-4094
Pires, Vera / Amaral, P. M. / Rosa, L. G. / Camposinhos, R. S.	Slate flexural and anchorage strength considerations in cladding design	3966-3971
Hui, Zhao / Sun, Wei	Study of properties of mortar containing cathode ray tubes (CRT) glass as replacement for river sand fine aggregate	4059-4064
Bouguerra, K. / Ahmed, E. A. / El-Gamal, S. / Benmokrane, B.	Testing of full-scale concrete bridge deck slabs reinforced with fiber-reinforced polymer (FRP) bars	3956-3965
Won, Jong-Pil / Kang, Hee-Byoung / Lee, Su-Jin / Lee, Sang-Woo / Kang, Joo-Won	Thermal characteristics of high-strength polymer–cement composites with lightweight aggregates and polypropylene fiber	3810-3819
Bhasin, Amit / Izadi, Anoosha / Bedgaker, Swapneel	Three dimensional distribution of the mastic in asphalt composites	4079-4087
Tamrakar, Sandeep / Lopez-Anido, Roberto A.	Water absorption of wood polypropylene composite sheet piles and its influence on mechanical properties	3977-3988

About this
data sheet
IssueID
22472
Published on:
16/12/2018
Last updated on:
16/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 25, n. 10 (October 2011)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 25, n. 10 (October 2011)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.