Construction and Building Materials - v. 25, n. 4 (April 2011)

Published:	April 2011

Articles in this Issue

Author(s)	Title	Page(s)
Kencanawati, Ni Nyoman / Shigeishi, Mitsuhiro	Acoustic emission sources of breakdown failure due to pulsed-electric discharge in concrete	1691-1698
Horpibulsuk, Suksun / Rachan, Runglawan / Suddeepong, Apichat	Assessment of strength development in blended cement admixed Bangkok clay	1521-1531
Corinaldesi, Valeria / Letelier, Viviana / Moriconi, Giacomo	Behaviour of beam–column joints made of recycled-aggregate concrete under cyclic loading	1877-1882
Silvestre, J. D. / de Brito, J.	Ceramic tiling in building façades: Inspection and pathological characterization using an expert system	1560-1571
Cevik, U. / Damla, N. / Van Grieken, R. / Akpınar, M. Vefa	Chemical composition of building materials used in Turkey	1546-1552
Jelle, Bjørn Petter / Nilsen, Tom-Nils	Comparison of accelerated climate ageing methods of polymer building materials by attenuated total reflectance Fourier transform infrared radiation spectroscopy	2122-2132
Riad, Mourad Y. / Shoukry, Samir N. / Sosa, Eduardo M. / William, Gergis W.	Concrete mix pouring sequence for uniform setting and curing of bridge decks	1653-1662
Lampropoulos, A. P. / Dritsos, S. E.	Concrete shrinkage effect on the behavior of RC columns under monotonic and cyclic loading	1596-1602
Yang, Jian / Du, Qiang / Bao, Yiwang	Concrete with recycled concrete aggregate and crushed clay bricks	1935-1945
Augenti, Nicola / Parisi, Fulvio	Constitutive modelling of tuff masonry in direct shear	1612-1620
Pliya, P. / Beaucour, A.-L. / Noumowe, A.	Contribution of cocktail of polypropylene and steel fibres in improving the behaviour of high strength concrete subjected to high temperature	1926-1934
Nili, Mahmoud / Zaheri, M.	Deicer salt-scaling resistance of non-air-entrained roller-compacted concrete pavements	1671-1676
Mas, Ángeles / Gutiérrez, Javier / Gil, Enrique / Gil, Alba / Galvañ, Vicente	Design and construction recommendations to improve impermeability in rainscreen walls built with natural stone coverings	1753-1761
Suh, Young-chan / Cho, Nam-Hyun / Mun, Sungho	Development of mechanistic–empirical design method for an asphalt pavement rutting model using APT	1685-1690
Vázquez, María Auxiliadora / Galán, Emilio / Guerrero, María Angeles / Ortiz, Pilar	Digital image processing of weathered stone caused by efflorescences: A tool for mapping and evaluation of stone decay	1603-1611
Chen, Dar-Hao / Won, Moon / Hong, Feng	Dowel Bar Retrofit (DBR) performance in Texas	1762-1771
Najimi, M. / Sobhani, J. / Pourkhorshidi, A. R.	Durability of copper slag contained concrete exposed to sulfate attack	1895-1905
Darquennes, A. / Khokhar, M. I. A. / Rozière, E. / Loukili, A. / Grondin, F. / Staquet, S.	Early age deformations of concrete with high content of mineral additions	1836-1847
Liao, Yishun / Wei, Xiaosheng / Li, Guowei	Early hydration of calcium sulfoaluminate cement through electrical resistivity measurement and microstructure investigations	1572-1579
Karakurt, Cenk / Topçu, İlker Bekir	Effect of blended cements produced with natural zeolite and industrial by-products on alkali-silica reaction and sulfate resistance of concrete	1789-1795
Wang, Xiao-Hui / Gao, Xiang-Hua / Li, Bing / Deng, Bao-Ru	Effect of bond and corrosion within partial length on shear behaviour and load capacity of RC beam	1812-1823
Söylev, T. A.	The effect of fibers on the variation of bond between steel reinforcement and concrete with casting position	1736-1746
Sajedi, Fathollah / Razak, Hashim Abdul	Effects of curing regimes and cement fineness on the compressive strength of ordinary Portland cement mortars	2036-2045
Bai, Yu / Keller, Thomas	Effects of thermal loading history on structural adhesive modulus across glass transition	2162-2168
Lu, Feifei / Ayoub, Ashraf	Evaluation of debonding failure of reinforced concrete girders strengthened in flexure with FRP laminates using finite element modeling	1963-1979
Piattoni, Quintilio / Quagliarini, Enrico / Lenci, Stefano	Experimental analysis and modelling of the mechanical behaviour of earthen bricks	2067-2075
Franzoni, Elisa / Sandrolini, Franco / Bandini, Simone	An experimental fixture for continuous monitoring of electrical effects in moist masonry walls	2023-2029
Santilli, A. / Puente, I. / Tanco, M.	A factorial design study to determine the significant parameters of fresh concrete lateral pressure and initial rate of pressure decay	1946-1955
Nowamooz, H. / Chazallon, C.	Finite element modelling of a rammed earth wall	2112-2121
Amin, M. S. / Hashem, F. S.	Hydration characteristics of hydrothermal treated cement kiln dust–sludge–silica fume pastes	1870-1876
Fasana, Sara / Nelva, Riccardo	Improvement of the performance of traditional stone roofs by wind driven rain experimental tests	1491-1502
Billong, Ndigui / Melo, U. C. / Kamseu, E. / Kinuthia, J. M. / Njopwouo, D.	Improving hydraulic properties of lime–rice husk ash (RHA) binders with metakaolin (MK)	2157-2161
Luccioni, Bibiana / Rougier, Viviana C.	In-plane retrofitting of masonry panels with fibre reinforced composite materials	1772-1788
Ouyang, Dong / Xu, Weiting / Lo, Tommy Y. / Sham, Janet F. C.	Increasing mortar strength with the use of activated kaolin by-products from paper industry	1537-1545
Şahin, Yuşa / Köksal, Fuat	The influences of matrix and steel fibre tensile strengths on the fracture energy of high-strength concrete	1801-1806
Pereira, A. / Palha, F. / de Brito, J. / Silvestre, J. D.	Inspection and diagnosis system for gypsum plasters in partition walls and ceilings	2146-2156
Tai Tan, Fu / Ma, Xiao Qian / Feng, Chao	Investigation on combustion of fire retardant board under different N2–O2 mixture gas atmospheres by using thermogravimetric analysis	2076-2084
Jeong, Kyu-Dong / Lee, Soon-Jae / Kim, Kwang W.	Laboratory evaluation of flexible pavement materials containing waste polyethylene (WPE) film	1890-1894
Wen, Qing-Jie	Long-term effect analysis of prestressed concrete box-girder bridge widening	1580-1586
Cerni, G. / Cardone, F. / Colagrande, S.	Low-temperature tensile behaviour of asphalt binders: Application of loading time–temperature–conditioning time superposition principle	2133-2145
Anshari, B. / Guan, Z. W. / Kitamori, A. / Jung, K. / Hassel, I. / Komatsu, Kokei	Mechanical and moisture-dependent swelling properties of compressed Japanese cedar	1718-1725
Toniolo, L. / Paradisi, A. / Goidanich, S. / Pennati, G.	Mechanical behaviour of lime based mortars after surface consolidation	1553-1559
Mallat, Amjad / Alliche, Abdenour	Mechanical investigation of two fiber-reinforced repair mortars and the repaired system	1587-1595
Elsaid, A. / Dawood, M. / Seracino, R. / Bobko, C.	Mechanical properties of kenaf fiber reinforced concrete	1991-2001
Zhang, Mingzhong / Ye, Guang / Van Breugel, Klaas	Microstructure-based modeling of water diffusivity in cement paste	2046-2052
Won, Jong-Pil / Kim, Joon-Mo / Lee, Su-Jin / Lee, Sang-Woo / Park, Sung-Ki	Mix proportion of high-strength, roller-compacted, latex-modified rapid-set concrete for rapid road repair	1796-1800
de Moura, M. F. S. F. / Oliveira, J. M. Q. / Morais, J. J. L. / Dourado, N.	Mixed-mode (I+II) fracture characterization of wood bonded joints	1956-1962
Demir, Abdullah / Topçu, İlker Bekir / Kuşan, Hakan	Modeling of some properties of the crushed tile concretes exposed to elevated temperatures	1883-1889
Lee, Tzen-Chin / Chang, Chieh-Jen / Rao, Ming-Kang / Su, Xun-Wei	Modified MSWI ash-mix slag for use in cement concrete	1513-1520
Yildirim, Hasan / Sengul, Ozkan	Modulus of elasticity of substandard and normal concretes	1645-1652
Kyriazopoulos, A. / Anastasiadis, C. / Triantis, D. / Brown, C. J.	Non-destructive evaluation of cement-based materials from pressure-stimulated electrical emission – Preliminary results	1980-1990
Aggelis, D. G. / Tsimpris, N. / Chai, H. K. / Shiotani, T. / Kobayashi, Y.	Numerical simulation of elastic waves for visualization of defects	1503-1512
Shafigh, Payam / Jumaat, Mohd Zamin / Mahmud, Hilmi	Oil palm shell as a lightweight aggregate for production high strength lightweight concrete	1848-1853
Haidar, Murhaf / Ghorbel, Elhem / Toutanji, Houssam	Optimization of the formulation of micro-polymer concretes	1632-1644
Modarres, Amir / Nejad, Fereidoon Moghadas / Kavussi, Amir / Hassani, Abolfazl / Shabanzadeh, Ehsan	A parametric study on the laboratory fatigue characteristics of recycled mixes	2085-2093
Yun, Taeyoung / Lee, Oleg / Lee, Seung Woo / Kim, In Tai / Cho, Yoon-Ho	A performance evaluation method of preformed joint sealant: Slip-down failure	1677-1684
Pasquini, E. / Canestrari, F. / Cardone, F. / Santagata, F. A.	Performance evaluation of gap graded Asphalt Rubber mixtures	2014-2022
Bateni, Farshid / Ahmad, Fauziah / Yahya, Ahmad Shukri / Azmi, Mastura	Performance of oil palm empty fruit bunch fibres coated with acrylonitrile butadiene styrene	1824-1829
Pereira de Oliveira, Luiz A. / Castro-Gomes, João P.	Physical and mechanical behaviour of recycled PET fibre reinforced mortar	1712-1717
Yavuz, H. / Ozkahraman, T. / Demirdag, S.	Polishing experiments on surface quality of building stone tiles	1707-1711
Chernin, Leon / Val, Dimitri V.	Prediction of corrosion-induced cover cracking in reinforced concrete structures	1854-1869
Foti, Dora	Preliminary analysis of concrete reinforced with waste bottles PET fibers	1906-1915
Luo, Wen-qian / Chen, Jiu-cun	Preparation and properties of bitumen modified by EVA graft copolymer	1830-1835
Chen, Yongliang / Zhang, Yimin / Chen, Tiejun / Zhao, Yunliang / Bao, Shenxu	Preparation of eco-friendly construction bricks from hematite tailings	2107-2111
He, Zheng / Qiu, Feng	Probabilistic assessment on flexural capacity of GFRP-reinforced concrete beams designed by guideline ACI 440.1R-06	1663-1670
Geetha, S. / Ramamurthy, K.	Properties of sintered low calcium bottom ash aggregate with clay binders	2002-2013
Casas, Joan R.	Reliability-based assessment of masonry arch bridges	1621-1631
Siddique, Rafat / Aggarwal, Yogesh / Aggarwal, Paratibha / Kadri, El-Hadj / Bennacer, Rachid	Strength, durability, and micro-structural properties of concrete made with used-foundry sand (UFS)	1916-1925
Turanlı, Lütfullah / Saritas, Afsin	Strengthening the structural behavior of adobe walls through the use of plaster reinforcement mesh	1747-1752
Van Tuan, Nguyen / Ye, Guang / Van Breugel, Klaas / Fraaij, Alex L. A. / Bui, Danh Dai	The study of using rice husk ash to produce ultra high performance concrete	2030-2035
Liu, Xiaoming / Wu, Shaopeng	Study on the graphite and carbon fiber modified asphalt concrete	1807-1811
Reza, Bahareh / Sadiq, Rehan / Hewage, Kasun	Sustainability assessment of flooring systems in the city of Tehran: An AHP-based life cycle analysis	2053-2066
Riveiro, B. / Morer, P. / Arias, P. / de Arteaga, I.	Terrestrial laser scanning and limit analysis of masonry arch bridges	1726-1735
Aflaki, Sassan / Memarzadeh, Milad	Using two-way ANOVA and hypothesis test in evaluating crumb rubber modification (CRM) agitation effects on rheological properties of bitumen	2094-2106
Chen, Mei-zhu / Lin, Jun-tao / Wu, Shao-peng / Liu, Cong-hui	Utilization of recycled brick powder as alternative filler in asphalt mixture	1532-1536
Liu, Zhenhong / Chen, Quanyuan / Xie, Xuebao / Xue, Gang / Du, Feifei / Ning, Qiuyan / Huang, Lu	Utilization of the sludge derived from dyestuff-making wastewater coagulation for unfired bricks	1699-1706

About this
data sheet
IssueID
22466
Published on:
16/12/2018
Last updated on:
16/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 25, n. 4 (April 2011)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 25, n. 4 (April 2011)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.